提交 3eb8f765 编写于 作者: K Kunihiko Hayashi 提交者: Philipp Zabel

reset: uniphier-usb3: Rename to reset-uniphier-glue

This driver works for controlling the reset lines including USB3
glue layer, however, this can be applied to other glue layers.
Now this patch renames the driver from "reset-uniphier-usb3" to
"reset-uniphier-glue".

At the same time, this changes CONFIG_RESET_UNIPHIER_USB3 to
CONFIG_RESET_UNIPHIER_GLUE.
Signed-off-by: NKunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: NPhilipp Zabel <p.zabel@pengutronix.de>
上级 21b22136
......@@ -171,15 +171,15 @@ config RESET_UNIPHIER
Say Y if you want to control reset signals provided by System Control
block, Media I/O block, Peripheral Block.
config RESET_UNIPHIER_USB3
tristate "USB3 reset driver for UniPhier SoCs"
config RESET_UNIPHIER_GLUE
tristate "Reset driver in glue layer for UniPhier SoCs"
depends on (ARCH_UNIPHIER || COMPILE_TEST) && OF
default ARCH_UNIPHIER
select RESET_SIMPLE
help
Support for the USB3 core reset on UniPhier SoCs.
Say Y if you want to control reset signals provided by
USB3 glue layer.
Support for peripheral core reset included in its own glue layer
on UniPhier SoCs. Say Y if you want to control reset signals
provided by the glue layer.
config RESET_ZYNQ
bool "ZYNQ Reset Driver" if COMPILE_TEST
......
......@@ -24,6 +24,6 @@ obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o
obj-$(CONFIG_RESET_TI_SCI) += reset-ti-sci.o
obj-$(CONFIG_RESET_TI_SYSCON) += reset-ti-syscon.o
obj-$(CONFIG_RESET_UNIPHIER) += reset-uniphier.o
obj-$(CONFIG_RESET_UNIPHIER_USB3) += reset-uniphier-usb3.o
obj-$(CONFIG_RESET_UNIPHIER_GLUE) += reset-uniphier-glue.o
obj-$(CONFIG_RESET_ZYNQ) += reset-zynq.o
// SPDX-License-Identifier: GPL-2.0
//
// reset-uniphier-usb3.c - USB3 reset driver for UniPhier
// reset-uniphier-glue.c - Glue layer reset driver for UniPhier
// Copyright 2018 Socionext Inc.
// Author: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
......@@ -15,24 +15,24 @@
#define MAX_CLKS 2
#define MAX_RSTS 2
struct uniphier_usb3_reset_soc_data {
struct uniphier_glue_reset_soc_data {
int nclks;
const char * const *clock_names;
int nrsts;
const char * const *reset_names;
};
struct uniphier_usb3_reset_priv {
struct uniphier_glue_reset_priv {
struct clk_bulk_data clk[MAX_CLKS];
struct reset_control *rst[MAX_RSTS];
struct reset_simple_data rdata;
const struct uniphier_usb3_reset_soc_data *data;
const struct uniphier_glue_reset_soc_data *data;
};
static int uniphier_usb3_reset_probe(struct platform_device *pdev)
static int uniphier_glue_reset_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct uniphier_usb3_reset_priv *priv;
struct uniphier_glue_reset_priv *priv;
struct resource *res;
resource_size_t size;
const char *name;
......@@ -100,9 +100,9 @@ static int uniphier_usb3_reset_probe(struct platform_device *pdev)
return ret;
}
static int uniphier_usb3_reset_remove(struct platform_device *pdev)
static int uniphier_glue_reset_remove(struct platform_device *pdev)
{
struct uniphier_usb3_reset_priv *priv = platform_get_drvdata(pdev);
struct uniphier_glue_reset_priv *priv = platform_get_drvdata(pdev);
int i;
for (i = 0; i < priv->data->nrsts; i++)
......@@ -117,7 +117,7 @@ static const char * const uniphier_pro4_clock_reset_names[] = {
"gio", "link",
};
static const struct uniphier_usb3_reset_soc_data uniphier_pro4_data = {
static const struct uniphier_glue_reset_soc_data uniphier_pro4_data = {
.nclks = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
.clock_names = uniphier_pro4_clock_reset_names,
.nrsts = ARRAY_SIZE(uniphier_pro4_clock_reset_names),
......@@ -128,14 +128,14 @@ static const char * const uniphier_pxs2_clock_reset_names[] = {
"link",
};
static const struct uniphier_usb3_reset_soc_data uniphier_pxs2_data = {
static const struct uniphier_glue_reset_soc_data uniphier_pxs2_data = {
.nclks = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
.clock_names = uniphier_pxs2_clock_reset_names,
.nrsts = ARRAY_SIZE(uniphier_pxs2_clock_reset_names),
.reset_names = uniphier_pxs2_clock_reset_names,
};
static const struct of_device_id uniphier_usb3_reset_match[] = {
static const struct of_device_id uniphier_glue_reset_match[] = {
{
.compatible = "socionext,uniphier-pro4-usb3-reset",
.data = &uniphier_pro4_data,
......@@ -154,18 +154,18 @@ static const struct of_device_id uniphier_usb3_reset_match[] = {
},
{ /* Sentinel */ }
};
MODULE_DEVICE_TABLE(of, uniphier_usb3_reset_match);
MODULE_DEVICE_TABLE(of, uniphier_glue_reset_match);
static struct platform_driver uniphier_usb3_reset_driver = {
.probe = uniphier_usb3_reset_probe,
.remove = uniphier_usb3_reset_remove,
static struct platform_driver uniphier_glue_reset_driver = {
.probe = uniphier_glue_reset_probe,
.remove = uniphier_glue_reset_remove,
.driver = {
.name = "uniphier-usb3-reset",
.of_match_table = uniphier_usb3_reset_match,
.name = "uniphier-glue-reset",
.of_match_table = uniphier_glue_reset_match,
},
};
module_platform_driver(uniphier_usb3_reset_driver);
module_platform_driver(uniphier_glue_reset_driver);
MODULE_AUTHOR("Kunihiko Hayashi <hayashi.kunihiko@socionext.com>");
MODULE_DESCRIPTION("UniPhier USB3 Reset Driver");
MODULE_DESCRIPTION("UniPhier Glue layer reset driver");
MODULE_LICENSE("GPL");
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册