提交 3e41d652 编写于 作者: M Mikael Starvik 提交者: Linus Torvalds

[PATCH] CRIS update: configuration and build

Changes to configuration and build system.

* Added v32 sub architecture.
* Use generic hard IRQ.
* Added SMP options.
* Added options to OOPS at NMI and reboot at OOM.
* Made it possible to set objtree.
* Added option to select Kernel GDB serial port.
* Corrected Kconfig usage.
* Added system profiler.
Signed-off-by: NMikael Starvik <starvik@axis.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 cb09f540
...@@ -38,4 +38,9 @@ config FRAME_POINTER ...@@ -38,4 +38,9 @@ config FRAME_POINTER
If you don't debug the kernel, you can say N, but we may not be able If you don't debug the kernel, you can say N, but we may not be able
to solve problems without frame pointers. to solve problems without frame pointers.
config DEBUG_NMI_OOPS
bool "NMI causes oops printout"
help
If the system locks up without any debug information you can say Y
here to make it possible to dump an OOPS with an external NMI.
endmenu endmenu
# $Id: Makefile,v 1.23 2004/10/19 13:07:34 starvik Exp $ # $Id: Makefile,v 1.28 2005/03/17 10:44:37 larsv Exp $
# cris/Makefile # cris/Makefile
# #
# This file is included by the global makefile so that you can add your own # This file is included by the global makefile so that you can add your own
...@@ -15,6 +15,7 @@ ...@@ -15,6 +15,7 @@
arch-y := v10 arch-y := v10
arch-$(CONFIG_ETRAX_ARCH_V10) := v10 arch-$(CONFIG_ETRAX_ARCH_V10) := v10
arch-$(CONFIG_ETRAX_ARCH_V32) := v32
# No config avaiable for make clean etc # No config avaiable for make clean etc
ifneq ($(arch-y),) ifneq ($(arch-y),)
...@@ -46,6 +47,21 @@ core-y += arch/$(ARCH)/$(SARCH)/kernel/ arch/$(ARCH)/$(SARCH)/mm/ ...@@ -46,6 +47,21 @@ core-y += arch/$(ARCH)/$(SARCH)/kernel/ arch/$(ARCH)/$(SARCH)/mm/
drivers-y += arch/$(ARCH)/$(SARCH)/drivers/ drivers-y += arch/$(ARCH)/$(SARCH)/drivers/
libs-y += arch/$(ARCH)/$(SARCH)/lib/ $(LIBGCC) libs-y += arch/$(ARCH)/$(SARCH)/lib/ $(LIBGCC)
# cris source path
SRC_ARCH = $(srctree)/arch/$(ARCH)
# cris object files path
OBJ_ARCH = $(objtree)/arch/$(ARCH)
target_boot_arch_dir = $(OBJ_ARCH)/$(SARCH)/boot
target_boot_dir = $(OBJ_ARCH)/boot
src_boot_dir = $(SRC_ARCH)/boot
target_compressed_dir = $(OBJ_ARCH)/boot/compressed
src_compressed_dir = $(SRC_ARCH)/boot/compressed
target_rescue_dir = $(OBJ_ARCH)/boot/rescue
src_rescue_dir = $(SRC_ARCH)/boot/rescue
export target_boot_arch_dir target_boot_dir src_boot_dir target_compressed_dir src_compressed_dir target_rescue_dir src_rescue_dir
vmlinux.bin: vmlinux vmlinux.bin: vmlinux
$(OBJCOPY) $(OBJCOPYFLAGS) vmlinux vmlinux.bin $(OBJCOPY) $(OBJCOPYFLAGS) vmlinux vmlinux.bin
...@@ -65,44 +81,52 @@ cramfs: ...@@ -65,44 +81,52 @@ cramfs:
clinux: vmlinux.bin decompress.bin rescue.bin clinux: vmlinux.bin decompress.bin rescue.bin
decompress.bin: FORCE decompress.bin: $(target_boot_dir)
@make -C arch/$(ARCH)/boot/compressed decompress.bin @$(MAKE) -f $(src_compressed_dir)/Makefile $(target_compressed_dir)/decompress.bin
rescue.bin: FORCE $(target_rescue_dir)/rescue.bin: $(target_boot_dir)
@make -C arch/$(ARCH)/boot/rescue rescue.bin @$(MAKE) -f $(src_rescue_dir)/Makefile $(target_rescue_dir)/rescue.bin
zImage: vmlinux.bin rescue.bin zImage: $(target_boot_dir) vmlinux.bin $(target_rescue_dir)/rescue.bin
## zImage - Compressed kernel (gzip) ## zImage - Compressed kernel (gzip)
@make -C arch/$(ARCH)/boot/ zImage @$(MAKE) -f $(src_boot_dir)/Makefile zImage
$(target_boot_dir): $(target_boot_arch_dir)
ln -sfn $< $@
$(target_boot_arch_dir):
mkdir -p $@
compressed: zImage compressed: zImage
archmrproper: archmrproper:
archclean: archclean:
$(Q)$(MAKE) $(clean)=arch/$(ARCH)/boot @if [ -d arch/$(ARCH)/boot ]; then \
$(MAKE) $(clean)=arch/$(ARCH)/boot ; \
fi
rm -f timage vmlinux.bin decompress.bin rescue.bin cramfs.img rm -f timage vmlinux.bin decompress.bin rescue.bin cramfs.img
rm -rf $(LD_SCRIPT).tmp rm -rf $(LD_SCRIPT).tmp
prepare: arch/$(ARCH)/.links include/asm-$(ARCH)/.arch \ prepare: $(SRC_ARCH)/.links $(srctree)/include/asm-$(ARCH)/.arch \
include/asm-$(ARCH)/$(SARCH)/offset.h include/asm-$(ARCH)/$(SARCH)/offset.h
# Create some links to make all tools happy # Create some links to make all tools happy
arch/$(ARCH)/.links: $(SRC_ARCH)/.links:
@rm -rf arch/$(ARCH)/drivers @rm -rf $(SRC_ARCH)/drivers
@ln -sfn $(SARCH)/drivers arch/$(ARCH)/drivers @ln -sfn $(SRC_ARCH)/$(SARCH)/drivers $(SRC_ARCH)/drivers
@rm -rf arch/$(ARCH)/boot @rm -rf $(SRC_ARCH)/boot
@ln -sfn $(SARCH)/boot arch/$(ARCH)/boot @ln -sfn $(SRC_ARCH)/$(SARCH)/boot $(SRC_ARCH)/boot
@rm -rf arch/$(ARCH)/lib @rm -rf $(SRC_ARCH)/lib
@ln -sfn $(SARCH)/lib arch/$(ARCH)/lib @ln -sfn $(SRC_ARCH)/$(SARCH)/lib $(SRC_ARCH)/lib
@ln -sfn $(SARCH) arch/$(ARCH)/arch @ln -sfn $(SRC_ARCH)/$(SARCH) $(SRC_ARCH)/arch
@ln -sfn ../$(SARCH)/vmlinux.lds.S arch/$(ARCH)/kernel/vmlinux.lds.S @ln -sfn $(SRC_ARCH)/$(SARCH)/vmlinux.lds.S $(SRC_ARCH)/kernel/vmlinux.lds.S
@touch $@ @touch $@
# Create link to sub arch includes # Create link to sub arch includes
include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h) $(srctree)/include/asm-$(ARCH)/.arch: $(wildcard include/config/arch/*.h)
@echo ' Making asm-$(ARCH)/arch -> asm-$(ARCH)/$(SARCH) symlink' @echo ' Making $(srctree)/include/asm-$(ARCH)/arch -> $(srctree)/include/asm-$(ARCH)/$(SARCH) symlink'
@rm -f include/asm-$(ARCH)/arch @rm -f include/asm-$(ARCH)/arch
@ln -sf $(SARCH) include/asm-$(ARCH)/arch @ln -sf $(srctree)/include/asm-$(ARCH)/$(SARCH) $(srctree)/include/asm-$(ARCH)/arch
@touch $@ @touch $@
arch/$(ARCH)/$(SARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \ arch/$(ARCH)/$(SARCH)/kernel/asm-offsets.s: include/asm include/linux/version.h \
......
...@@ -259,6 +259,37 @@ config ETRAX_DEBUG_PORT_NULL ...@@ -259,6 +259,37 @@ config ETRAX_DEBUG_PORT_NULL
endchoice endchoice
choice
prompt "Kernel GDB port"
depends on ETRAX_KGDB
default ETRAX_KGDB_PORT0
help
Choose a serial port for kernel debugging. NOTE: This port should
not be enabled under Drivers for built-in interfaces (as it has its
own initialization code) and should not be the same as the debug port.
config ETRAX_KGDB_PORT0
bool "Serial-0"
help
Use serial port 0 for kernel debugging.
config ETRAX_KGDB_PORT1
bool "Serial-1"
help
Use serial port 1 for kernel debugging.
config ETRAX_KGDB_PORT2
bool "Serial-2"
help
Use serial port 2 for kernel debugging.
config ETRAX_KGDB_PORT3
bool "Serial-3"
help
Use serial port 3 for kernel debugging.
endchoice
choice choice
prompt "Product rescue-port" prompt "Product rescue-port"
depends on ETRAX_ARCH_V10 depends on ETRAX_ARCH_V10
......
# #
# arch/cris/boot/Makefile # arch/cris/boot/Makefile
# #
target = $(target_boot_dir)
src = $(src_boot_dir)
zImage: compressed/vmlinuz zImage: compressed/vmlinuz
compressed/vmlinuz: $(TOPDIR)/vmlinux compressed/vmlinuz:
@$(MAKE) -C compressed vmlinuz @$(MAKE) -f $(src)/compressed/Makefile $(target_compressed_dir)/vmlinuz
clean: clean:
rm -f zImage tools/build compressed/vmlinux.out @$(MAKE) -f $(src)/compressed/Makefile clean
@$(MAKE) -C compressed clean
# #
# linux/arch/etrax100/boot/compressed/Makefile # create a compressed vmlinuz image from the binary vmlinux.bin file
#
# create a compressed vmlinux image from the original vmlinux files and romfs
# #
target = $(target_compressed_dir)
src = $(src_compressed_dir)
CC = gcc-cris -melf -I $(TOPDIR)/include CC = gcc-cris -melf $(LINUXINCLUDE)
CFLAGS = -O2 CFLAGS = -O2
LD = ld-cris LD = ld-cris
OBJCOPY = objcopy-cris OBJCOPY = objcopy-cris
OBJCOPYFLAGS = -O binary --remove-section=.bss OBJCOPYFLAGS = -O binary --remove-section=.bss
OBJECTS = head.o misc.o OBJECTS = $(target)/head.o $(target)/misc.o
# files to compress # files to compress
SYSTEM = $(TOPDIR)/vmlinux.bin SYSTEM = $(objtree)/vmlinux.bin
all: vmlinuz all: $(target_compressed_dir)/vmlinuz
decompress.bin: $(OBJECTS) $(target)/decompress.bin: $(OBJECTS)
$(LD) -T decompress.ld -o decompress.o $(OBJECTS) $(LD) -T $(src)/decompress.ld -o $(target)/decompress.o $(OBJECTS)
$(OBJCOPY) $(OBJCOPYFLAGS) decompress.o decompress.bin $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/decompress.o $(target)/decompress.bin
# save it for mkprod in the topdir.
cp decompress.bin $(TOPDIR)
# Create vmlinuz image in top-level build directory
$(target_compressed_dir)/vmlinuz: $(target) piggy.img $(target)/decompress.bin
@echo " COMPR vmlinux.bin --> vmlinuz"
@cat $(target)/decompress.bin piggy.img > $(target_compressed_dir)/vmlinuz
@rm -f piggy.img
vmlinuz: piggy.img decompress.bin $(target)/head.o: $(src)/head.S
cat decompress.bin piggy.img > vmlinuz $(CC) -D__ASSEMBLY__ -traditional -c $< -o $@
rm -f piggy.img
head.o: head.S $(target)/misc.o: $(src)/misc.c
$(CC) -D__ASSEMBLY__ -traditional -c head.S -o head.o $(CC) -D__KERNEL__ -c $< -o $@
# gzip the kernel image # gzip the kernel image
piggy.img: $(SYSTEM) piggy.img: $(SYSTEM)
cat $(SYSTEM) | gzip -f -9 > piggy.img @cat $(SYSTEM) | gzip -f -9 > piggy.img
$(target):
mkdir -p $(target)
clean: clean:
rm -f piggy.img vmlinuz vmlinuz.o rm -f piggy.img $(objtree)/vmlinuz
# #
# Makefile for rescue code # Makefile for rescue code
# #
ifndef TOPDIR target = $(target_rescue_dir)
TOPDIR = ../../../.. src = $(src_rescue_dir)
endif
CC = gcc-cris -mlinux -I $(TOPDIR)/include CC = gcc-cris -mlinux $(LINUXINCLUDE)
CFLAGS = -O2 CFLAGS = -O2
LD = gcc-cris -mlinux -nostdlib LD = gcc-cris -mlinux -nostdlib
OBJCOPY = objcopy-cris OBJCOPY = objcopy-cris
OBJCOPYFLAGS = -O binary --remove-section=.bss OBJCOPYFLAGS = -O binary --remove-section=.bss
all: rescue.bin testrescue.bin kimagerescue.bin all: $(target)/rescue.bin $(target)/testrescue.bin $(target)/kimagerescue.bin
rescue: rescue.bin
# do nothing
rescue.bin: head.o $(target)/rescue.bin: $(target) $(target)/head.o
$(LD) -T rescue.ld -o rescue.o head.o $(LD) -T $(src)/rescue.ld -o $(target)/rescue.o $(target)/head.o
$(OBJCOPY) $(OBJCOPYFLAGS) rescue.o rescue.bin $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/rescue.o $(target)/rescue.bin
cp rescue.bin $(TOPDIR) # Place a copy in top-level build directory
cp -p $(target)/rescue.bin $(objtree)
testrescue.bin: testrescue.o $(target)/testrescue.bin: $(target) $(target)/testrescue.o
$(OBJCOPY) $(OBJCOPYFLAGS) testrescue.o tr.bin $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/testrescue.o tr.bin
# Pad it to 784 bytes # Pad it to 784 bytes
dd if=/dev/zero of=tmp2423 bs=1 count=784 dd if=/dev/zero of=tmp2423 bs=1 count=784
cat tr.bin tmp2423 >testrescue_tmp.bin cat tr.bin tmp2423 >testrescue_tmp.bin
dd if=testrescue_tmp.bin of=testrescue.bin bs=1 count=784 dd if=testrescue_tmp.bin of=$(target)/testrescue.bin bs=1 count=784
rm tr.bin tmp2423 testrescue_tmp.bin rm tr.bin tmp2423 testrescue_tmp.bin
kimagerescue.bin: kimagerescue.o $(target)/kimagerescue.bin: $(target) $(target)/kimagerescue.o
$(OBJCOPY) $(OBJCOPYFLAGS) kimagerescue.o ktr.bin $(OBJCOPY) $(OBJCOPYFLAGS) $(target)/kimagerescue.o ktr.bin
# Pad it to 784 bytes, that's what the rescue loader expects # Pad it to 784 bytes, that's what the rescue loader expects
dd if=/dev/zero of=tmp2423 bs=1 count=784 dd if=/dev/zero of=tmp2423 bs=1 count=784
cat ktr.bin tmp2423 >kimagerescue_tmp.bin cat ktr.bin tmp2423 >kimagerescue_tmp.bin
dd if=kimagerescue_tmp.bin of=kimagerescue.bin bs=1 count=784 dd if=kimagerescue_tmp.bin of=$(target)/kimagerescue.bin bs=1 count=784
rm ktr.bin tmp2423 kimagerescue_tmp.bin rm ktr.bin tmp2423 kimagerescue_tmp.bin
head.o: head.S $(target):
mkdir -p $(target)
$(target)/head.o: $(src)/head.S
$(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
testrescue.o: testrescue.S $(target)/testrescue.o: $(src)/testrescue.S
$(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
kimagerescue.o: kimagerescue.S $(target)/kimagerescue.o: $(src)/kimagerescue.S
$(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o $(CC) -D__ASSEMBLY__ -traditional -c $< -o $*.o
clean: clean:
rm -f *.o *.bin rm -f $(target)/*.o $(target)/*.bin
fastdep: fastdep:
......
config ETRAX_ETHERNET config ETRAX_ETHERNET
bool "Ethernet support" bool "Ethernet support"
depends on ETRAX_ARCH_V10 depends on ETRAX_ARCH_V10
select NET_ETHERNET
help help
This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet This option enables the ETRAX 100LX built-in 10/100Mbit Ethernet
controller. controller.
# this is just so that the user does not have to go into the
# normal ethernet driver section just to enable ethernetworking
config NET_ETHERNET
bool
depends on ETRAX_ETHERNET
default y
choice choice
prompt "Network LED behavior" prompt "Network LED behavior"
depends on ETRAX_ETHERNET depends on ETRAX_ETHERNET
...@@ -20,26 +14,26 @@ choice ...@@ -20,26 +14,26 @@ choice
config ETRAX_NETWORK_LED_ON_WHEN_LINK config ETRAX_NETWORK_LED_ON_WHEN_LINK
bool "LED_on_when_link" bool "LED_on_when_link"
help help
Selecting LED_on_when_link will light the LED when there is a Selecting LED_on_when_link will light the LED when there is a
connection and will flash off when there is activity. connection and will flash off when there is activity.
Selecting LED_on_when_activity will light the LED only when Selecting LED_on_when_activity will light the LED only when
there is activity. there is activity.
This setting will also affect the behaviour of other activity LEDs This setting will also affect the behaviour of other activity LEDs
e.g. Bluetooth. e.g. Bluetooth.
config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY config ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY
bool "LED_on_when_activity" bool "LED_on_when_activity"
help help
Selecting LED_on_when_link will light the LED when there is a Selecting LED_on_when_link will light the LED when there is a
connection and will flash off when there is activity. connection and will flash off when there is activity.
Selecting LED_on_when_activity will light the LED only when Selecting LED_on_when_activity will light the LED only when
there is activity. there is activity.
This setting will also affect the behaviour of other activity LEDs This setting will also affect the behaviour of other activity LEDs
e.g. Bluetooth. e.g. Bluetooth.
endchoice endchoice
...@@ -91,11 +85,11 @@ choice ...@@ -91,11 +85,11 @@ choice
depends on ETRAX_SERIAL_PORT0 depends on ETRAX_SERIAL_PORT0
default ETRAX_SERIAL_PORT0_DMA6_OUT default ETRAX_SERIAL_PORT0_DMA6_OUT
config CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT config ETRAX_SERIAL_PORT0_NO_DMA_OUT
bool "No DMA out" bool "No DMA out"
config CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT config ETRAX_SERIAL_PORT0_DMA6_OUT
bool "DMA 6" bool "DMA 6"
endchoice endchoice
...@@ -104,11 +98,11 @@ choice ...@@ -104,11 +98,11 @@ choice
depends on ETRAX_SERIAL_PORT0 depends on ETRAX_SERIAL_PORT0
default ETRAX_SERIAL_PORT0_DMA7_IN default ETRAX_SERIAL_PORT0_DMA7_IN
config CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN config ETRAX_SERIAL_PORT0_NO_DMA_IN
bool "No DMA in" bool "No DMA in"
config CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN config ETRAX_SERIAL_PORT0_DMA7_IN
bool "DMA 7" bool "DMA 7"
endchoice endchoice
...@@ -205,11 +199,11 @@ choice ...@@ -205,11 +199,11 @@ choice
depends on ETRAX_SERIAL_PORT1 depends on ETRAX_SERIAL_PORT1
default ETRAX_SERIAL_PORT1_DMA8_OUT default ETRAX_SERIAL_PORT1_DMA8_OUT
config CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_OUT config ETRAX_SERIAL_PORT1_NO_DMA_OUT
bool "No DMA out" bool "No DMA out"
config CONFIG_ETRAX_SERIAL_PORT1_DMA8_OUT config ETRAX_SERIAL_PORT1_DMA8_OUT
bool "DMA 8" bool "DMA 8"
endchoice endchoice
...@@ -218,11 +212,11 @@ choice ...@@ -218,11 +212,11 @@ choice
depends on ETRAX_SERIAL_PORT1 depends on ETRAX_SERIAL_PORT1
default ETRAX_SERIAL_PORT1_DMA9_IN default ETRAX_SERIAL_PORT1_DMA9_IN
config CONFIG_ETRAX_SERIAL_PORT1_NO_DMA_IN config ETRAX_SERIAL_PORT1_NO_DMA_IN
bool "No DMA in" bool "No DMA in"
config CONFIG_ETRAX_SERIAL_PORT1_DMA9_IN config ETRAX_SERIAL_PORT1_DMA9_IN
bool "DMA 9" bool "DMA 9"
endchoice endchoice
...@@ -308,7 +302,7 @@ config ETRAX_SER1_CD_ON_PB_BIT ...@@ -308,7 +302,7 @@ config ETRAX_SER1_CD_ON_PB_BIT
Specify the pin of the PB port to carry the CD signal for serial Specify the pin of the PB port to carry the CD signal for serial
port 1. port 1.
comment "Make sure you dont have the same PB bits more than once!" comment "Make sure you do not have the same PB bits more than once!"
depends on ETRAX_SERIAL && ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && ETRAX_SER1_DTR_RI_DSR_CD_ON_PB depends on ETRAX_SERIAL && ETRAX_SER0_DTR_RI_DSR_CD_ON_PB && ETRAX_SER1_DTR_RI_DSR_CD_ON_PB
config ETRAX_SERIAL_PORT2 config ETRAX_SERIAL_PORT2
...@@ -322,11 +316,11 @@ choice ...@@ -322,11 +316,11 @@ choice
depends on ETRAX_SERIAL_PORT2 depends on ETRAX_SERIAL_PORT2
default ETRAX_SERIAL_PORT2_DMA2_OUT default ETRAX_SERIAL_PORT2_DMA2_OUT
config CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT config ETRAX_SERIAL_PORT2_NO_DMA_OUT
bool "No DMA out" bool "No DMA out"
config CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT config ETRAX_SERIAL_PORT2_DMA2_OUT
bool "DMA 2" bool "DMA 2"
endchoice endchoice
...@@ -335,11 +329,11 @@ choice ...@@ -335,11 +329,11 @@ choice
depends on ETRAX_SERIAL_PORT2 depends on ETRAX_SERIAL_PORT2
default ETRAX_SERIAL_PORT2_DMA3_IN default ETRAX_SERIAL_PORT2_DMA3_IN
config CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN config ETRAX_SERIAL_PORT2_NO_DMA_IN
bool "No DMA in" bool "No DMA in"
config CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN config ETRAX_SERIAL_PORT2_DMA3_IN
bool "DMA 3" bool "DMA 3"
endchoice endchoice
...@@ -436,11 +430,11 @@ choice ...@@ -436,11 +430,11 @@ choice
depends on ETRAX_SERIAL_PORT3 depends on ETRAX_SERIAL_PORT3
default ETRAX_SERIAL_PORT3_DMA4_OUT default ETRAX_SERIAL_PORT3_DMA4_OUT
config CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_OUT config ETRAX_SERIAL_PORT3_NO_DMA_OUT
bool "No DMA out" bool "No DMA out"
config CONFIG_ETRAX_SERIAL_PORT3_DMA4_OUT config ETRAX_SERIAL_PORT3_DMA4_OUT
bool "DMA 4" bool "DMA 4"
endchoice endchoice
...@@ -449,11 +443,11 @@ choice ...@@ -449,11 +443,11 @@ choice
depends on ETRAX_SERIAL_PORT3 depends on ETRAX_SERIAL_PORT3
default ETRAX_SERIAL_PORT3_DMA5_IN default ETRAX_SERIAL_PORT3_DMA5_IN
config CONFIG_ETRAX_SERIAL_PORT3_NO_DMA_IN config ETRAX_SERIAL_PORT3_NO_DMA_IN
bool "No DMA in" bool "No DMA in"
config CONFIG_ETRAX_SERIAL_PORT3_DMA5_IN config ETRAX_SERIAL_PORT3_DMA5_IN
bool "DMA 5" bool "DMA 5"
endchoice endchoice
...@@ -554,7 +548,6 @@ config ETRAX_IDE ...@@ -554,7 +548,6 @@ config ETRAX_IDE
select BLK_DEV_IDEDISK select BLK_DEV_IDEDISK
select BLK_DEV_IDECD select BLK_DEV_IDECD
select BLK_DEV_IDEDMA select BLK_DEV_IDEDMA
select DMA_NONPCI
help help
Enable this to get support for ATA/IDE. Enable this to get support for ATA/IDE.
You can't use paralell ports or SCSI ports You can't use paralell ports or SCSI ports
...@@ -579,7 +572,7 @@ config ETRAX_IDE_PB7_RESET ...@@ -579,7 +572,7 @@ config ETRAX_IDE_PB7_RESET
IDE reset on pin 7 on port B IDE reset on pin 7 on port B
config ETRAX_IDE_G27_RESET config ETRAX_IDE_G27_RESET
bool "Port_G_Bit_27" bool "Port_G_Bit_27"
help help
IDE reset on pin 27 on port G IDE reset on pin 27 on port G
...@@ -588,30 +581,36 @@ endchoice ...@@ -588,30 +581,36 @@ endchoice
config ETRAX_USB_HOST config ETRAX_USB_HOST
bool "USB host" bool "USB host"
select USB
help help
This option enables the host functionality of the ETRAX 100LX This option enables the host functionality of the ETRAX 100LX
built-in USB controller. In host mode the controller is designed built-in USB controller. In host mode the controller is designed
for CTRL and BULK traffic only, INTR traffic may work as well for CTRL and BULK traffic only, INTR traffic may work as well
however (depending on the requirements of timeliness). however (depending on the requirements of timeliness).
config USB
tristate
depends on ETRAX_USB_HOST
default y
config ETRAX_USB_HOST_PORT1 config ETRAX_USB_HOST_PORT1
bool " USB port 1 enabled" bool "USB port 1 enabled"
depends on ETRAX_USB_HOST depends on ETRAX_USB_HOST
default n default n
config ETRAX_USB_HOST_PORT2 config ETRAX_USB_HOST_PORT2
bool " USB port 2 enabled" bool "USB port 2 enabled"
depends on ETRAX_USB_HOST depends on ETRAX_USB_HOST
default n default n
config ETRAX_AXISFLASHMAP config ETRAX_AXISFLASHMAP
bool "Axis flash-map support" bool "Axis flash-map support"
depends on ETRAX_ARCH_V10 depends on ETRAX_ARCH_V10
select MTD
select MTD_CFI
select MTD_CFI_AMDSTD
select MTD_OBSOLETE_CHIPS
select MTD_AMDSTD
select MTD_CHAR
select MTD_BLOCK
select MTD_PARTITIONS
select MTD_CONCAT
select MTD_COMPLEX_MAPPINGS
help help
This option enables MTD mapping of flash devices. Needed to use This option enables MTD mapping of flash devices. Needed to use
flash memories. If unsure, say Y. flash memories. If unsure, say Y.
...@@ -627,119 +626,6 @@ config ETRAX_PTABLE_SECTOR ...@@ -627,119 +626,6 @@ config ETRAX_PTABLE_SECTOR
for changing this is when the flash block size is bigger for changing this is when the flash block size is bigger
than 64kB (e.g. when using two parallel 16 bit flashes). than 64kB (e.g. when using two parallel 16 bit flashes).
# here we define the CONFIG_'s necessary to enable MTD support
# for the flash
config MTD
tristate
depends on ETRAX_AXISFLASHMAP
default y
help
Memory Technology Devices are flash, RAM and similar chips, often
used for solid state file systems on embedded devices. This option
will provide the generic support for MTD drivers to register
themselves with the kernel and for potential users of MTD devices
to enumerate the devices which are present and obtain a handle on
them. It will also allow you to select individual drivers for
particular hardware and users of MTD devices. If unsure, say N.
config MTD_CFI
tristate
depends on ETRAX_AXISFLASHMAP
default y
help
The Common Flash Interface specification was developed by Intel,
AMD and other flash manufactures that provides a universal method
for probing the capabilities of flash devices. If you wish to
support any device that is CFI-compliant, you need to enable this
option. Visit <http://www.amd.com/products/nvd/overview/cfi.html>
for more information on CFI.
config MTD_CFI_AMDSTD
tristate
depends on ETRAX_AXISFLASHMAP
default y
help
The Common Flash Interface defines a number of different command
sets which a CFI-compliant chip may claim to implement. This code
provides support for one of those command sets, used on chips
chips including the AMD Am29LV320.
config MTD_OBSOLETE_CHIPS
bool
depends on ETRAX_AXISFLASHMAP
default y
help
This option does not enable any code directly, but will allow you to
select some other chip drivers which are now considered obsolete,
because the generic CONFIG_JEDEC_PROBE code above should now detect
the chips which are supported by these drivers, and allow the generic
CFI-compatible drivers to drive the chips. Say 'N' here unless you have
already tried the CONFIG_JEDEC_PROBE method and reported its failure
to the MTD mailing list at <linux-mtd@lists.infradead.org>
config MTD_AMDSTD
tristate
depends on ETRAX_AXISFLASHMAP
default y
help
This option enables support for flash chips using AMD-compatible
commands, including some which are not CFI-compatible and hence
cannot be used with the CONFIG_MTD_CFI_AMDSTD option.
It also works on AMD compatible chips that do conform to CFI.
config MTD_CHAR
tristate
depends on ETRAX_AXISFLASHMAP
default y
help
This provides a character device for each MTD device present in
the system, allowing the user to read and write directly to the
memory chips, and also use ioctl() to obtain information about
the device, or to erase parts of it.
config MTD_BLOCK
tristate
depends on ETRAX_AXISFLASHMAP
default y
---help---
Although most flash chips have an erase size too large to be useful
as block devices, it is possible to use MTD devices which are based
on RAM chips in this manner. This block device is a user of MTD
devices performing that function.
At the moment, it is also required for the Journalling Flash File
System(s) to obtain a handle on the MTD device when it's mounted
(although JFFS and JFFS2 don't actually use any of the functionality
of the mtdblock device).
Later, it may be extended to perform read/erase/modify/write cycles
on flash chips to emulate a smaller block size. Needless to say,
this is very unsafe, but could be useful for file systems which are
almost never written to.
You do not need this option for use with the DiskOnChip devices. For
those, enable NFTL support (CONFIG_NFTL) instead.
config MTD_PARTITIONS
tristate
depends on ETRAX_AXISFLASHMAP
default y
help
If you have a device which needs to divide its flash chip(s) up
into multiple 'partitions', each of which appears to the user as
a separate MTD device, you require this option to be enabled. If
unsure, say 'Y'.
Note, however, that you don't need this option for the DiskOnChip
devices. Partitioning on NFTL 'devices' is a different - that's the
'normal' form of partitioning used on a block device.
config MTD_CONCAT
tristate
depends on ETRAX_AXISFLASHMAP
default y
config ETRAX_I2C config ETRAX_I2C
bool "I2C support" bool "I2C support"
depends on ETRAX_ARCH_V10 depends on ETRAX_ARCH_V10
...@@ -752,7 +638,7 @@ config ETRAX_I2C ...@@ -752,7 +638,7 @@ config ETRAX_I2C
val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg); val = ioctl(fd, _IO(ETRAXI2C_IOCTYPE, I2C_READREG), i2c_arg);
# this is true for most products since PB-I2C seems to be somewhat # this is true for most products since PB-I2C seems to be somewhat
# flawed.. # flawed..
config ETRAX_I2C_USES_PB_NOT_PB_I2C config ETRAX_I2C_USES_PB_NOT_PB_I2C
bool "I2C uses PB not PB-I2C" bool "I2C uses PB not PB-I2C"
depends on ETRAX_I2C depends on ETRAX_I2C
...@@ -886,7 +772,7 @@ config ETRAX_RTC ...@@ -886,7 +772,7 @@ config ETRAX_RTC
bool "Real Time Clock support" bool "Real Time Clock support"
depends on ETRAX_ARCH_V10 depends on ETRAX_ARCH_V10
help help
Enables drivers for the Real-Time Clock battery-backed chips on Enables drivers for the Real-Time Clock battery-backed chips on
some products. The kernel reads the time when booting, and some products. The kernel reads the time when booting, and
the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a the date can be set using ioctl(fd, RTC_SET_TIME, &rt) with rt a
rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc rtc_time struct (see <file:include/asm-cris/rtc.h>) on the /dev/rtc
...@@ -903,13 +789,13 @@ config ETRAX_DS1302 ...@@ -903,13 +789,13 @@ config ETRAX_DS1302
bool "DS1302" bool "DS1302"
help help
Enables the driver for the DS1302 Real-Time Clock battery-backed Enables the driver for the DS1302 Real-Time Clock battery-backed
chip on some products. chip on some products.
config ETRAX_PCF8563 config ETRAX_PCF8563
bool "PCF8563" bool "PCF8563"
help help
Enables the driver for the PCF8563 Real-Time Clock battery-backed Enables the driver for the PCF8563 Real-Time Clock battery-backed
chip on some products. chip on some products.
endchoice endchoice
...@@ -954,10 +840,8 @@ config ETRAX_DS1302_TRICKLE_CHARGE ...@@ -954,10 +840,8 @@ config ETRAX_DS1302_TRICKLE_CHARGE
help help
This controls the initial value of the trickle charge register. This controls the initial value of the trickle charge register.
0 = disabled (use this if you are unsure or have a non rechargable battery) 0 = disabled (use this if you are unsure or have a non rechargable battery)
Otherwise the following values can be OR:ed together to control the Otherwise the following values can be OR:ed together to control the
charge current: charge current:
1 = 2kohm, 2 = 4kohm, 3 = 4kohm 1 = 2kohm, 2 = 4kohm, 3 = 4kohm
4 = 1 diode, 8 = 2 diodes 4 = 1 diode, 8 = 2 diodes
Allowed values are (increasing current): 0, 11, 10, 9, 7, 6, 5 Allowed values are (increasing current): 0, 11, 10, 9, 7, 6, 5
# #
# Automatically generated make config: don't edit # Automatically generated make config: don't edit
# Linux kernel version: 2.6.11
# Mon Jun 20 13:42:02 2005
# #
CONFIG_MMU=y CONFIG_MMU=y
CONFIG_UID16=y CONFIG_UID16=y
CONFIG_RWSEM_GENERIC_SPINLOCK=y CONFIG_RWSEM_GENERIC_SPINLOCK=y
CONFIG_GENERIC_IOMAP=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_CRIS=y
# #
# Code maturity level options # Code maturity level options
# #
CONFIG_EXPERIMENTAL=y CONFIG_EXPERIMENTAL=y
CONFIG_CLEAN_COMPILE=y CONFIG_CLEAN_COMPILE=y
CONFIG_STANDALONE=y
CONFIG_BROKEN_ON_SMP=y CONFIG_BROKEN_ON_SMP=y
# #
# General setup # General setup
# #
CONFIG_SWAP=y CONFIG_LOCALVERSION=""
# CONFIG_SWAP is not set
# CONFIG_SYSVIPC is not set # CONFIG_SYSVIPC is not set
# CONFIG_POSIX_MQUEUE is not set # CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_BSD_PROCESS_ACCT is not set
...@@ -24,16 +29,19 @@ CONFIG_SYSCTL=y ...@@ -24,16 +29,19 @@ CONFIG_SYSCTL=y
# CONFIG_AUDIT is not set # CONFIG_AUDIT is not set
CONFIG_LOG_BUF_SHIFT=14 CONFIG_LOG_BUF_SHIFT=14
# CONFIG_HOTPLUG is not set # CONFIG_HOTPLUG is not set
CONFIG_KOBJECT_UEVENT=y
# CONFIG_IKCONFIG is not set # CONFIG_IKCONFIG is not set
CONFIG_EMBEDDED=y CONFIG_EMBEDDED=y
# CONFIG_KALLSYMS is not set # CONFIG_KALLSYMS is not set
CONFIG_FUTEX=y CONFIG_FUTEX=y
CONFIG_EPOLL=y CONFIG_EPOLL=y
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SHMEM=y
CONFIG_CC_ALIGN_FUNCTIONS=0
CONFIG_CC_ALIGN_LABELS=0
CONFIG_CC_ALIGN_LOOPS=0
CONFIG_CC_ALIGN_JUMPS=0
# CONFIG_TINY_SHMEM is not set
# #
# Loadable module support # Loadable module support
...@@ -45,23 +53,28 @@ CONFIG_IOSCHED_CFQ=y ...@@ -45,23 +53,28 @@ CONFIG_IOSCHED_CFQ=y
# #
CONFIG_BINFMT_ELF=y CONFIG_BINFMT_ELF=y
# CONFIG_BINFMT_MISC is not set # CONFIG_BINFMT_MISC is not set
CONFIG_GENERIC_HARDIRQS=y
# CONFIG_SMP is not set
CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock3 init=/linuxrc" CONFIG_ETRAX_CMDLINE="root=/dev/mtdblock3 init=/linuxrc"
CONFIG_ETRAX_WATCHDOG=y # CONFIG_ETRAX_WATCHDOG is not set
CONFIG_ETRAX_WATCHDOG_NICE_DOGGY=y
CONFIG_ETRAX_FAST_TIMER=y CONFIG_ETRAX_FAST_TIMER=y
# CONFIG_PREEMPT is not set # CONFIG_PREEMPT is not set
# CONFIG_OOM_REBOOT is not set
# #
# Hardware setup # Hardware setup
# #
CONFIG_ETRAX100LX=y # CONFIG_ETRAX100LX is not set
# CONFIG_ETRAX100LX_V2 is not set CONFIG_ETRAX100LX_V2=y
# CONFIG_SVINTO_SIM is not set # CONFIG_SVINTO_SIM is not set
# CONFIG_ETRAXFS is not set
# CONFIG_ETRAXFS_SIM is not set
CONFIG_ETRAX_ARCH_V10=y CONFIG_ETRAX_ARCH_V10=y
CONFIG_ETRAX_DRAM_SIZE=16 # CONFIG_ETRAX_ARCH_V32 is not set
CONFIG_ETRAX_DRAM_SIZE=32
CONFIG_ETRAX_FLASH_BUSWIDTH=2 CONFIG_ETRAX_FLASH_BUSWIDTH=2
CONFIG_CRIS_LOW_MAP=y CONFIG_ETRAX_FLASH1_SIZE=4
CONFIG_ETRAX_DRAM_VIRTUAL_BASE=60000000 CONFIG_ETRAX_DRAM_VIRTUAL_BASE=c0000000
CONFIG_ETRAX_PA_LEDS=y CONFIG_ETRAX_PA_LEDS=y
# CONFIG_ETRAX_PB_LEDS is not set # CONFIG_ETRAX_PB_LEDS is not set
# CONFIG_ETRAX_CSP0_LEDS is not set # CONFIG_ETRAX_CSP0_LEDS is not set
...@@ -81,13 +94,13 @@ CONFIG_ETRAX_RESCUE_SER0=y ...@@ -81,13 +94,13 @@ CONFIG_ETRAX_RESCUE_SER0=y
# CONFIG_ETRAX_RESCUE_SER1 is not set # CONFIG_ETRAX_RESCUE_SER1 is not set
# CONFIG_ETRAX_RESCUE_SER2 is not set # CONFIG_ETRAX_RESCUE_SER2 is not set
# CONFIG_ETRAX_RESCUE_SER3 is not set # CONFIG_ETRAX_RESCUE_SER3 is not set
CONFIG_ETRAX_DEF_R_WAITSTATES=0x95f8 CONFIG_ETRAX_DEF_R_WAITSTATES=0x95a6
CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x104 CONFIG_ETRAX_DEF_R_BUS_CONFIG=0x4
CONFIG_ETRAX_SDRAM=y CONFIG_ETRAX_SDRAM=y
CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x00e03636 CONFIG_ETRAX_DEF_R_SDRAM_CONFIG=0x09e05757
CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80008002 CONFIG_ETRAX_DEF_R_SDRAM_TIMING=0x80008002
CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1d CONFIG_ETRAX_DEF_R_PORT_PA_DIR=0x1d
CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0xf0 CONFIG_ETRAX_DEF_R_PORT_PA_DATA=0x00
CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=0x00 CONFIG_ETRAX_DEF_R_PORT_PB_CONFIG=0x00
CONFIG_ETRAX_DEF_R_PORT_PB_DIR=0x1e CONFIG_ETRAX_DEF_R_PORT_PB_DIR=0x1e
CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0xf3 CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0xf3
...@@ -97,16 +110,17 @@ CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0xf3 ...@@ -97,16 +110,17 @@ CONFIG_ETRAX_DEF_R_PORT_PB_DATA=0xf3
# Drivers for built-in interfaces # Drivers for built-in interfaces
# #
CONFIG_ETRAX_ETHERNET=y CONFIG_ETRAX_ETHERNET=y
CONFIG_NET_ETHERNET=y
# CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set # CONFIG_ETRAX_NETWORK_LED_ON_WHEN_LINK is not set
CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y CONFIG_ETRAX_NETWORK_LED_ON_WHEN_ACTIVITY=y
CONFIG_ETRAX_SERIAL=y CONFIG_ETRAX_SERIAL=y
CONFIG_ETRAX_SERIAL_FAST_TIMER=y # CONFIG_ETRAX_SERIAL_FAST_TIMER is not set
# CONFIG_ETRAX_SERIAL_FLUSH_DMA_FAST is not set
CONFIG_ETRAX_SERIAL_RX_TIMEOUT_TICKS=5
CONFIG_ETRAX_SERIAL_PORT0=y CONFIG_ETRAX_SERIAL_PORT0=y
# CONFIG_CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT is not set # CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_OUT is not set
CONFIG_CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT=y CONFIG_ETRAX_SERIAL_PORT0_DMA6_OUT=y
# CONFIG_CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN is not set # CONFIG_ETRAX_SERIAL_PORT0_NO_DMA_IN is not set
CONFIG_CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN=y CONFIG_ETRAX_SERIAL_PORT0_DMA7_IN=y
CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE=y CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_NONE=y
# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PA is not set # CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PA is not set
# CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set # CONFIG_ETRAX_SER0_DTR_RI_DSR_CD_ON_PB is not set
...@@ -121,10 +135,10 @@ CONFIG_ETRAX_SER0_DSR_ON_PB_BIT=-1 ...@@ -121,10 +135,10 @@ CONFIG_ETRAX_SER0_DSR_ON_PB_BIT=-1
CONFIG_ETRAX_SER0_CD_ON_PB_BIT=-1 CONFIG_ETRAX_SER0_CD_ON_PB_BIT=-1
# CONFIG_ETRAX_SERIAL_PORT1 is not set # CONFIG_ETRAX_SERIAL_PORT1 is not set
CONFIG_ETRAX_SERIAL_PORT2=y CONFIG_ETRAX_SERIAL_PORT2=y
# CONFIG_CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT is not set # CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_OUT is not set
CONFIG_CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT=y CONFIG_ETRAX_SERIAL_PORT2_DMA2_OUT=y
# CONFIG_CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN is not set # CONFIG_ETRAX_SERIAL_PORT2_NO_DMA_IN is not set
CONFIG_CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN=y CONFIG_ETRAX_SERIAL_PORT2_DMA3_IN=y
CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE=y CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_NONE=y
# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA is not set # CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PA is not set
# CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PB is not set # CONFIG_ETRAX_SER2_DTR_RI_DSR_CD_ON_PB is not set
...@@ -138,44 +152,51 @@ CONFIG_ETRAX_SER2_RI_ON_PB_BIT=-1 ...@@ -138,44 +152,51 @@ CONFIG_ETRAX_SER2_RI_ON_PB_BIT=-1
CONFIG_ETRAX_SER2_DSR_ON_PB_BIT=-1 CONFIG_ETRAX_SER2_DSR_ON_PB_BIT=-1
CONFIG_ETRAX_SER2_CD_ON_PB_BIT=-1 CONFIG_ETRAX_SER2_CD_ON_PB_BIT=-1
# CONFIG_ETRAX_SERIAL_PORT3 is not set # CONFIG_ETRAX_SERIAL_PORT3 is not set
# CONFIG_ETRAX_RS485 is not set CONFIG_ETRAX_RS485=y
# CONFIG_ETRAX_IDE is not set # CONFIG_ETRAX_RS485_ON_PA is not set
# CONFIG_IDE is not set # CONFIG_ETRAX_RS485_DISABLE_RECEIVER is not set
# CONFIG_ETRAX_USB_HOST is not set CONFIG_ETRAX_IDE=y
CONFIG_ETRAX_IDE_DELAY=15
CONFIG_ETRAX_IDE_PB7_RESET=y
# CONFIG_ETRAX_IDE_G27_RESET is not set
CONFIG_ETRAX_USB_HOST=y
CONFIG_ETRAX_USB_HOST_PORT1=y
CONFIG_ETRAX_USB_HOST_PORT2=y
CONFIG_ETRAX_AXISFLASHMAP=y CONFIG_ETRAX_AXISFLASHMAP=y
CONFIG_ETRAX_PTABLE_SECTOR=65536 CONFIG_ETRAX_PTABLE_SECTOR=65536
CONFIG_MTD=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_OBSOLETE_CHIPS=y
CONFIG_MTD_AMDSTD=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CONCAT=y
# CONFIG_ETRAX_I2C is not set # CONFIG_ETRAX_I2C is not set
CONFIG_ETRAX_GPIO=y # CONFIG_ETRAX_GPIO is not set
CONFIG_ETRAX_PA_BUTTON_BITMASK=0x02 CONFIG_ETRAX_RTC=y
CONFIG_ETRAX_PA_CHANGEABLE_DIR=0x00 CONFIG_ETRAX_DS1302=y
CONFIG_ETRAX_PA_CHANGEABLE_BITS=0xFF # CONFIG_ETRAX_PCF8563 is not set
CONFIG_ETRAX_PB_CHANGEABLE_DIR=0x00 CONFIG_ETRAX_DS1302_RST_ON_GENERIC_PORT=y
CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF CONFIG_ETRAX_DS1302_RSTBIT=0
# CONFIG_ETRAX_RTC is not set CONFIG_ETRAX_DS1302_SCLBIT=1
CONFIG_ETRAX_DS1302_SDABIT=0
CONFIG_ETRAX_DS1302_TRICKLE_CHARGE=0
# #
# Generic Driver Options # Generic Driver Options
# #
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_FW_LOADER is not set
# #
# Memory Technology Devices (MTD) # Memory Technology Devices (MTD)
# #
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set # CONFIG_MTD_DEBUG is not set
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CONCAT=y
# CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set
# CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set
# #
# User Modules And Translation Layers # User Modules And Translation Layers
# #
CONFIG_MTD_CHAR=y
CONFIG_MTD_BLOCK=y
# CONFIG_FTL is not set # CONFIG_FTL is not set
# CONFIG_NFTL is not set # CONFIG_NFTL is not set
# CONFIG_INFTL is not set # CONFIG_INFTL is not set
...@@ -183,14 +204,30 @@ CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF ...@@ -183,14 +204,30 @@ CONFIG_ETRAX_PB_CHANGEABLE_BITS=0xFF
# #
# RAM/ROM/Flash chip drivers # RAM/ROM/Flash chip drivers
# #
CONFIG_MTD_CFI=y
# CONFIG_MTD_JEDECPROBE is not set # CONFIG_MTD_JEDECPROBE is not set
CONFIG_MTD_GEN_PROBE=y CONFIG_MTD_GEN_PROBE=y
# CONFIG_MTD_CFI_ADV_OPTIONS is not set # CONFIG_MTD_CFI_ADV_OPTIONS is not set
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_CFI_I4 is not set
# CONFIG_MTD_CFI_I8 is not set
# CONFIG_MTD_CFI_INTELEXT is not set # CONFIG_MTD_CFI_INTELEXT is not set
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_AMDSTD_RETRY=0
# CONFIG_MTD_CFI_STAA is not set # CONFIG_MTD_CFI_STAA is not set
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_RAM=y CONFIG_MTD_RAM=y
# CONFIG_MTD_ROM is not set # CONFIG_MTD_ROM is not set
# CONFIG_MTD_ABSENT is not set # CONFIG_MTD_ABSENT is not set
CONFIG_MTD_OBSOLETE_CHIPS=y
CONFIG_MTD_AMDSTD=y
# CONFIG_MTD_SHARP is not set # CONFIG_MTD_SHARP is not set
# CONFIG_MTD_JEDEC is not set # CONFIG_MTD_JEDEC is not set
...@@ -204,11 +241,13 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y ...@@ -204,11 +241,13 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y
# Self-contained MTD device drivers # Self-contained MTD device drivers
# #
# CONFIG_MTD_SLRAM is not set # CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
CONFIG_MTD_MTDRAM=y CONFIG_MTD_MTDRAM=y
CONFIG_MTDRAM_TOTAL_SIZE=0 CONFIG_MTDRAM_TOTAL_SIZE=0
CONFIG_MTDRAM_ERASE_SIZE=64 CONFIG_MTDRAM_ERASE_SIZE=64
CONFIG_MTDRAM_ABS_POS=0x0 CONFIG_MTDRAM_ABS_POS=0x0
# CONFIG_MTD_BLKMTD is not set # CONFIG_MTD_BLKMTD is not set
# CONFIG_MTD_BLOCK2MTD is not set
# #
# Disk-On-Chip Device Drivers # Disk-On-Chip Device Drivers
...@@ -235,11 +274,25 @@ CONFIG_MTDRAM_ABS_POS=0x0 ...@@ -235,11 +274,25 @@ CONFIG_MTDRAM_ABS_POS=0x0
# Block devices # Block devices
# #
# CONFIG_BLK_DEV_FD is not set # CONFIG_BLK_DEV_FD is not set
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_NBD is not set
# CONFIG_BLK_DEV_UB is not set
CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_INITRD is not set # CONFIG_BLK_DEV_INITRD is not set
CONFIG_INITRAMFS_SOURCE=""
# CONFIG_CDROM_PKTCDVD is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
# CONFIG_IOSCHED_AS is not set
# CONFIG_IOSCHED_DEADLINE is not set
CONFIG_IOSCHED_CFQ=y
# CONFIG_ATA_OVER_ETH is not set
# #
# Multi-device support (RAID and LVM) # Multi-device support (RAID and LVM)
...@@ -249,6 +302,28 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 ...@@ -249,6 +302,28 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
# #
# ATA/ATAPI/MFM/RLL support # ATA/ATAPI/MFM/RLL support
# #
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
#
# Please see Documentation/ide.txt for help/info on IDE drives
#
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDEDISK=y
# CONFIG_IDEDISK_MULTI_MODE is not set
CONFIG_BLK_DEV_IDECD=y
# CONFIG_BLK_DEV_IDETAPE is not set
# CONFIG_BLK_DEV_IDEFLOPPY is not set
# CONFIG_IDE_TASK_IOCTL is not set
#
# IDE chipset support/bugfixes
#
# CONFIG_IDE_GENERIC is not set
# CONFIG_IDE_ARM is not set
CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_IDEDMA_AUTO is not set
# CONFIG_BLK_DEV_HD is not set
# #
# SCSI device support # SCSI device support
...@@ -258,7 +333,6 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 ...@@ -258,7 +333,6 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
# #
# IEEE 1394 (FireWire) support # IEEE 1394 (FireWire) support
# #
# CONFIG_IEEE1394 is not set
# #
# I2O device support # I2O device support
...@@ -288,6 +362,9 @@ CONFIG_INET=y ...@@ -288,6 +362,9 @@ CONFIG_INET=y
# CONFIG_INET_AH is not set # CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set # CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set # CONFIG_INET_IPCOMP is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_IP_TCPDIAG=y
# CONFIG_IP_TCPDIAG_IPV6 is not set
# #
# IP: Virtual Server Configuration # IP: Virtual Server Configuration
...@@ -301,11 +378,10 @@ CONFIG_NETFILTER=y ...@@ -301,11 +378,10 @@ CONFIG_NETFILTER=y
# IP: Netfilter Configuration # IP: Netfilter Configuration
# #
# CONFIG_IP_NF_CONNTRACK is not set # CONFIG_IP_NF_CONNTRACK is not set
# CONFIG_IP_NF_CONNTRACK_MARK is not set
# CONFIG_IP_NF_QUEUE is not set # CONFIG_IP_NF_QUEUE is not set
# CONFIG_IP_NF_IPTABLES is not set # CONFIG_IP_NF_IPTABLES is not set
# CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_NF_COMPAT_IPCHAINS is not set
# CONFIG_IP_NF_COMPAT_IPFWADM is not set
# #
# SCTP Configuration (EXPERIMENTAL) # SCTP Configuration (EXPERIMENTAL)
...@@ -323,12 +399,12 @@ CONFIG_NETFILTER=y ...@@ -323,12 +399,12 @@ CONFIG_NETFILTER=y
# CONFIG_NET_DIVERT is not set # CONFIG_NET_DIVERT is not set
# CONFIG_ECONET is not set # CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set # CONFIG_WAN_ROUTER is not set
# CONFIG_NET_HW_FLOWCONTROL is not set
# #
# QoS and/or fair queueing # QoS and/or fair queueing
# #
# CONFIG_NET_SCHED is not set # CONFIG_NET_SCHED is not set
# CONFIG_NET_CLS_ROUTE is not set
# #
# Network testing # Network testing
...@@ -338,7 +414,26 @@ CONFIG_NETFILTER=y ...@@ -338,7 +414,26 @@ CONFIG_NETFILTER=y
# CONFIG_NET_POLL_CONTROLLER is not set # CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_HAMRADIO is not set # CONFIG_HAMRADIO is not set
# CONFIG_IRDA is not set # CONFIG_IRDA is not set
# CONFIG_BT is not set CONFIG_BT=y
CONFIG_BT_L2CAP=y
# CONFIG_BT_SCO is not set
CONFIG_BT_RFCOMM=y
# CONFIG_BT_RFCOMM_TTY is not set
CONFIG_BT_BNEP=y
# CONFIG_BT_BNEP_MC_FILTER is not set
# CONFIG_BT_BNEP_PROTO_FILTER is not set
# CONFIG_BT_HIDP is not set
#
# Bluetooth device drivers
#
CONFIG_BT_HCIUSB=y
# CONFIG_BT_HCIUSB_SCO is not set
# CONFIG_BT_HCIUART is not set
# CONFIG_BT_HCIBCM203X is not set
# CONFIG_BT_HCIBPA10X is not set
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
CONFIG_NETDEVICES=y CONFIG_NETDEVICES=y
# CONFIG_DUMMY is not set # CONFIG_DUMMY is not set
# CONFIG_BONDING is not set # CONFIG_BONDING is not set
...@@ -348,6 +443,7 @@ CONFIG_NETDEVICES=y ...@@ -348,6 +443,7 @@ CONFIG_NETDEVICES=y
# #
# Ethernet (10 or 100Mbit) # Ethernet (10 or 100Mbit)
# #
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set # CONFIG_MII is not set
# #
...@@ -389,11 +485,19 @@ CONFIG_NETDEVICES=y ...@@ -389,11 +485,19 @@ CONFIG_NETDEVICES=y
# #
# Input device support # Input device support
# #
# CONFIG_INPUT is not set CONFIG_INPUT=y
# #
# Userland interfaces # Userland interfaces
# #
CONFIG_INPUT_MOUSEDEV=y
CONFIG_INPUT_MOUSEDEV_PSAUX=y
CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
# CONFIG_INPUT_JOYDEV is not set
# CONFIG_INPUT_TSDEV is not set
# CONFIG_INPUT_EVDEV is not set
# CONFIG_INPUT_EVBUG is not set
# #
# Input I/O drivers # Input I/O drivers
...@@ -404,10 +508,25 @@ CONFIG_SERIO=y ...@@ -404,10 +508,25 @@ CONFIG_SERIO=y
# CONFIG_SERIO_I8042 is not set # CONFIG_SERIO_I8042 is not set
# CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_SERPORT is not set
# CONFIG_SERIO_CT82C710 is not set # CONFIG_SERIO_CT82C710 is not set
CONFIG_SERIO_LIBPS2=y
# CONFIG_SERIO_RAW is not set
# #
# Input Device Drivers # Input Device Drivers
# #
CONFIG_INPUT_KEYBOARD=y
CONFIG_KEYBOARD_ATKBD=y
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_KEYBOARD_NEWTON is not set
CONFIG_INPUT_MOUSE=y
CONFIG_MOUSE_PS2=y
# CONFIG_MOUSE_SERIAL is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
# #
# Character devices # Character devices
...@@ -426,7 +545,6 @@ CONFIG_SERIO=y ...@@ -426,7 +545,6 @@ CONFIG_SERIO=y
CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTYS=y
CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256 CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_QIC02_TAPE is not set
# #
# IPMI # IPMI
...@@ -441,13 +559,10 @@ CONFIG_LEGACY_PTY_COUNT=256 ...@@ -441,13 +559,10 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_GEN_RTC is not set # CONFIG_GEN_RTC is not set
# CONFIG_DTLK is not set # CONFIG_DTLK is not set
# CONFIG_R3964 is not set # CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# #
# Ftape, the floppy tape device driver # Ftape, the floppy tape device driver
# #
# CONFIG_FTAPE is not set
# CONFIG_AGP is not set
# CONFIG_DRM is not set # CONFIG_DRM is not set
# CONFIG_RAW_DRIVER is not set # CONFIG_RAW_DRIVER is not set
...@@ -469,10 +584,15 @@ CONFIG_LEGACY_PTY_COUNT=256 ...@@ -469,10 +584,15 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_JBD is not set # CONFIG_JBD is not set
# CONFIG_REISERFS_FS is not set # CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set # CONFIG_JFS_FS is not set
#
# XFS support
#
# CONFIG_XFS_FS is not set # CONFIG_XFS_FS is not set
# CONFIG_MINIX_FS is not set # CONFIG_MINIX_FS is not set
# CONFIG_ROMFS_FS is not set # CONFIG_ROMFS_FS is not set
# CONFIG_QUOTA is not set # CONFIG_QUOTA is not set
CONFIG_DNOTIFY=y
# CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set # CONFIG_AUTOFS4_FS is not set
...@@ -485,7 +605,8 @@ CONFIG_LEGACY_PTY_COUNT=256 ...@@ -485,7 +605,8 @@ CONFIG_LEGACY_PTY_COUNT=256
# #
# DOS/FAT/NT Filesystems # DOS/FAT/NT Filesystems
# #
# CONFIG_FAT_FS is not set # CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set # CONFIG_NTFS_FS is not set
# #
...@@ -497,6 +618,7 @@ CONFIG_SYSFS=y ...@@ -497,6 +618,7 @@ CONFIG_SYSFS=y
# CONFIG_DEVFS_FS is not set # CONFIG_DEVFS_FS is not set
# CONFIG_DEVPTS_FS_XATTR is not set # CONFIG_DEVPTS_FS_XATTR is not set
CONFIG_TMPFS=y CONFIG_TMPFS=y
# CONFIG_TMPFS_XATTR is not set
# CONFIG_HUGETLB_PAGE is not set # CONFIG_HUGETLB_PAGE is not set
CONFIG_RAMFS=y CONFIG_RAMFS=y
...@@ -512,7 +634,15 @@ CONFIG_RAMFS=y ...@@ -512,7 +634,15 @@ CONFIG_RAMFS=y
# CONFIG_EFS_FS is not set # CONFIG_EFS_FS is not set
CONFIG_JFFS_FS=y CONFIG_JFFS_FS=y
CONFIG_JFFS_FS_VERBOSE=0 CONFIG_JFFS_FS_VERBOSE=0
# CONFIG_JFFS2_FS is not set # CONFIG_JFFS_PROC_FS is not set
CONFIG_JFFS2_FS=y
CONFIG_JFFS2_FS_DEBUG=0
# CONFIG_JFFS2_FS_NAND is not set
# CONFIG_JFFS2_FS_NOR_ECC is not set
# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y CONFIG_CRAMFS=y
# CONFIG_VXFS_FS is not set # CONFIG_VXFS_FS is not set
# CONFIG_HPFS_FS is not set # CONFIG_HPFS_FS is not set
...@@ -530,14 +660,13 @@ CONFIG_NFS_V3=y ...@@ -530,14 +660,13 @@ CONFIG_NFS_V3=y
# CONFIG_NFSD is not set # CONFIG_NFSD is not set
CONFIG_LOCKD=y CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y CONFIG_LOCKD_V4=y
# CONFIG_EXPORTFS is not set
CONFIG_SUNRPC=y CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set # CONFIG_SMB_FS is not set
# CONFIG_CIFS is not set # CONFIG_CIFS is not set
# CONFIG_NCP_FS is not set # CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set # CONFIG_CODA_FS is not set
# CONFIG_INTERMEZZO_FS is not set
# CONFIG_AFS_FS is not set # CONFIG_AFS_FS is not set
# #
...@@ -556,9 +685,121 @@ CONFIG_MSDOS_PARTITION=y ...@@ -556,9 +685,121 @@ CONFIG_MSDOS_PARTITION=y
# #
# CONFIG_SOUND is not set # CONFIG_SOUND is not set
#
# PCCARD (PCMCIA/CardBus) support
#
# CONFIG_PCCARD is not set
#
# PC-card bridges
#
# #
# USB support # USB support
# #
CONFIG_USB=y
# CONFIG_USB_DEBUG is not set
#
# Miscellaneous USB options
#
CONFIG_USB_DEVICEFS=y
# CONFIG_USB_BANDWIDTH is not set
# CONFIG_USB_DYNAMIC_MINORS is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
#
# USB Host Controller Drivers
#
# CONFIG_USB_SL811_HCD is not set
#
# USB Device Class drivers
#
#
# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem
#
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
#
# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
#
# CONFIG_USB_STORAGE is not set
#
# USB Input Devices
#
# CONFIG_USB_HID is not set
#
# USB HID Boot Protocol drivers
#
# CONFIG_USB_KBD is not set
# CONFIG_USB_MOUSE is not set
# CONFIG_USB_AIPTEK is not set
# CONFIG_USB_WACOM is not set
# CONFIG_USB_KBTAB is not set
# CONFIG_USB_POWERMATE is not set
# CONFIG_USB_MTOUCH is not set
# CONFIG_USB_EGALAX is not set
# CONFIG_USB_XPAD is not set
# CONFIG_USB_ATI_REMOTE is not set
#
# USB Imaging devices
#
# CONFIG_USB_MDC800 is not set
#
# USB Multimedia devices
#
# CONFIG_USB_DABUSB is not set
#
# Video4Linux support is needed for USB Multimedia device support
#
#
# USB Network Adapters
#
# CONFIG_USB_CATC is not set
# CONFIG_USB_KAWETH is not set
# CONFIG_USB_PEGASUS is not set
CONFIG_USB_RTL8150=y
# CONFIG_USB_USBNET is not set
#
# USB port drivers
#
#
# USB Serial Converter support
#
# CONFIG_USB_SERIAL is not set
#
# USB Miscellaneous drivers
#
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_AUERSWALD is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYTHERM is not set
# CONFIG_USB_PHIDGETKIT is not set
# CONFIG_USB_PHIDGETSERVO is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_TEST is not set
#
# USB ATM/DSL drivers
#
# #
# USB Gadget Support # USB Gadget Support
...@@ -568,14 +809,17 @@ CONFIG_MSDOS_PARTITION=y ...@@ -568,14 +809,17 @@ CONFIG_MSDOS_PARTITION=y
# #
# Kernel hacking # Kernel hacking
# #
# CONFIG_PROFILE is not set # CONFIG_PROFILING is not set
# CONFIG_SYSTEM_PROFILER is not set
# CONFIG_ETRAX_KGDB is not set # CONFIG_ETRAX_KGDB is not set
# CONFIG_DEBUG_INFO is not set # CONFIG_DEBUG_INFO is not set
# CONFIG_FRAME_POINTER is not set # CONFIG_FRAME_POINTER is not set
# CONFIG_DEBUG_NMI_OOPS is not set
# #
# Security options # Security options
# #
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set # CONFIG_SECURITY is not set
# #
...@@ -583,9 +827,15 @@ CONFIG_MSDOS_PARTITION=y ...@@ -583,9 +827,15 @@ CONFIG_MSDOS_PARTITION=y
# #
# CONFIG_CRYPTO is not set # CONFIG_CRYPTO is not set
#
# Hardware crypto devices
#
# #
# Library routines # Library routines
# #
# CONFIG_CRC32 is not set # CONFIG_CRC_CCITT is not set
CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set # CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
# $Id: Makefile,v 1.10 2004/05/14 10:18:12 starvik Exp $ # $Id: Makefile,v 1.12 2004/10/19 13:07:43 starvik Exp $
# #
# Makefile for the linux kernel. # Makefile for the linux kernel.
# #
...@@ -10,6 +10,7 @@ obj-y := process.o traps.o irq.o ptrace.o setup.o \ ...@@ -10,6 +10,7 @@ obj-y := process.o traps.o irq.o ptrace.o setup.o \
obj-$(CONFIG_MODULES) += crisksyms.o obj-$(CONFIG_MODULES) += crisksyms.o
obj-$(CONFIG_MODULES) += module.o obj-$(CONFIG_MODULES) += module.o
obj-$(CONFIG_SYSTEM_PROFILER) += profile.o
clean: clean:
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册