提交 3a4d3af7 编写于 作者: I Ivo van Doorn 提交者: John W. Linville

rt2x00: Clarify supported chipsets in Kconfig

As reported by Filipus Klutiero <chealer@gmail.com>,
the rt2x00 Kconfig entries should be updated with
specific chipset notifications.

This cleans up Kconfig by explicitly mentioning the
supported chipsets for each drivers, and uses the
same chipset family names as mentioned on the Ralink website.
Signed-off-by: NIvo van Doorn <IvDoorn@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 652e3f20
......@@ -5,12 +5,16 @@ config RT2X00
This will enable the experimental support for the Ralink drivers,
developed in the rt2x00 project <http://rt2x00.serialmonkey.com>.
These drivers will make use of the mac80211 stack.
These drivers make use of the mac80211 stack.
When building one of the individual drivers, the rt2x00 library
will also be created. That library (when the driver is built as
a module) will be called "rt2x00lib.ko".
Additionally PCI and USB libraries will also be build depending
on the types of drivers being selected, these libraries will be
called "rt2x00pci.ko" and "rt2x00usb.ko".
if RT2X00
config RT2X00_LIB
......@@ -40,26 +44,27 @@ config RT2X00_LIB_LEDS
depends on RT2X00_LIB
config RT2400PCI
tristate "Ralink rt2400 pci/pcmcia support"
tristate "Ralink rt2400 (PCI/PCMCIA) support"
depends on PCI
select RT2X00_LIB_PCI
select EEPROM_93CX6
---help---
This is an experimental driver for the Ralink rt2400 wireless chip.
This adds support for rt2400 wireless chipset family.
Supported chips: RT2460.
When compiled as a module, this driver will be called "rt2400pci.ko".
config RT2400PCI_RFKILL
bool "RT2400 rfkill support"
bool "Ralink rt2400 rfkill support"
depends on RT2400PCI
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt2400 devices that feature a
This adds support for integrated rt2400 hardware that features a
hardware button to control the radio state.
This feature depends on the RF switch subsystem rfkill.
config RT2400PCI_LEDS
bool "RT2400 leds support"
bool "Ralink rt2400 leds support"
depends on RT2400PCI
select LEDS_CLASS
select RT2X00_LIB_LEDS
......@@ -67,26 +72,27 @@ config RT2400PCI_LEDS
This adds support for led triggers provided my mac80211.
config RT2500PCI
tristate "Ralink rt2500 pci/pcmcia support"
tristate "Ralink rt2500 (PCI/PCMCIA) support"
depends on PCI
select RT2X00_LIB_PCI
select EEPROM_93CX6
---help---
This is an experimental driver for the Ralink rt2500 wireless chip.
This adds support for rt2500 wireless chipset family.
Supported chips: RT2560.
When compiled as a module, this driver will be called "rt2500pci.ko".
config RT2500PCI_RFKILL
bool "RT2500 rfkill support"
bool "Ralink rt2500 rfkill support"
depends on RT2500PCI
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt2500 devices that feature a
This adds support for integrated rt2500 hardware that features a
hardware button to control the radio state.
This feature depends on the RF switch subsystem rfkill.
config RT2500PCI_LEDS
bool "RT2500 leds support"
bool "Ralink rt2500 leds support"
depends on RT2500PCI
select LEDS_CLASS
select RT2X00_LIB_LEDS
......@@ -94,28 +100,29 @@ config RT2500PCI_LEDS
This adds support for led triggers provided my mac80211.
config RT61PCI
tristate "Ralink rt61 pci/pcmcia support"
tristate "Ralink rt2501/rt61 (PCI/PCMCIA) support"
depends on PCI
select RT2X00_LIB_PCI
select RT2X00_LIB_FIRMWARE
select CRC_ITU_T
select EEPROM_93CX6
---help---
This is an experimental driver for the Ralink rt61 wireless chip.
This adds support for rt2501 wireless chipset family.
Supported chips: RT2561, RT2561S & RT2661.
When compiled as a module, this driver will be called "rt61pci.ko".
config RT61PCI_RFKILL
bool "RT61 rfkill support"
bool "Ralink rt2501/rt61 rfkill support"
depends on RT61PCI
select RT2X00_LIB_RFKILL
---help---
This adds support for integrated rt61 devices that feature a
This adds support for integrated rt61 hardware that features a
hardware button to control the radio state.
This feature depends on the RF switch subsystem rfkill.
config RT61PCI_LEDS
bool "RT61 leds support"
bool "Ralink rt2501/rt61 leds support"
depends on RT61PCI
select LEDS_CLASS
select RT2X00_LIB_LEDS
......@@ -123,16 +130,17 @@ config RT61PCI_LEDS
This adds support for led triggers provided my mac80211.
config RT2500USB
tristate "Ralink rt2500 usb support"
tristate "Ralink rt2500 (USB) support"
depends on USB
select RT2X00_LIB_USB
---help---
This is an experimental driver for the Ralink rt2500 wireless chip.
This adds support for rt2500 wireless chipset family.
Supported chips: RT2571 & RT2572.
When compiled as a module, this driver will be called "rt2500usb.ko".
config RT2500USB_LEDS
bool "RT2500 leds support"
bool "Ralink rt2500 leds support"
depends on RT2500USB
select LEDS_CLASS
select RT2X00_LIB_LEDS
......@@ -140,18 +148,19 @@ config RT2500USB_LEDS
This adds support for led triggers provided my mac80211.
config RT73USB
tristate "Ralink rt73 usb support"
tristate "Ralink rt2501/rt73 (USB) support"
depends on USB
select RT2X00_LIB_USB
select RT2X00_LIB_FIRMWARE
select CRC_ITU_T
---help---
This is an experimental driver for the Ralink rt73 wireless chip.
This adds support for rt2501 wireless chipset family.
Supported chips: RT2571W, RT2573 & RT2671.
When compiled as a module, this driver will be called "rt73usb.ko".
config RT73USB_LEDS
bool "RT73 leds support"
bool "Ralink rt2501/rt73 leds support"
depends on RT73USB
select LEDS_CLASS
select RT2X00_LIB_LEDS
......@@ -164,7 +173,7 @@ config RT2X00_LIB_DEBUGFS
---help---
Enable creation of debugfs files for the rt2x00 drivers.
These debugfs files support both reading and writing of the
most important register types of the rt2x00 devices.
most important register types of the rt2x00 hardware.
config RT2X00_DEBUG
bool "Ralink debug output"
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册