提交 374c65d6 编写于 作者: A Alexander Duyck 提交者: Jeff Kirsher

ixgbe: Add mailbox API version negotiation support to ixgbe PF

This change allows us to add a mailbox versioning API.  This will allow us
to determine the features supported by the VFs from the PF.  For example we
will be implementing a version 1.1 API for the VF that will indicate that
it can support us enabling Jumbo frames as the VF will support buffer
chaining.
Signed-off-by: NAlexander Duyck <alexander.h.duyck@intel.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Tested-by: NRobert Garrett <RobertX.Garrett@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 58a02bee
......@@ -135,6 +135,7 @@ struct vf_data_storage {
u16 tx_rate;
u16 vlan_count;
u8 spoofchk_enabled;
unsigned int vf_api;
};
struct vf_macvlans {
......
......@@ -62,12 +62,29 @@
/* bits 23:16 are used for exra info for certain messages */
#define IXGBE_VT_MSGINFO_MASK (0xFF << IXGBE_VT_MSGINFO_SHIFT)
/* definitions to support mailbox API version negotiation */
/*
* Each element denotes a version of the API; existing numbers may not
* change; any additions must go at the end
*/
enum ixgbe_pfvf_api_rev {
ixgbe_mbox_api_10, /* API version 1.0, linux/freebsd VF driver */
ixgbe_mbox_api_20, /* API version 2.0, solaris Phase1 VF driver */
/* This value should always be last */
ixgbe_mbox_api_unknown, /* indicates that API version is not known */
};
/* mailbox API, legacy requests */
#define IXGBE_VF_RESET 0x01 /* VF requests reset */
#define IXGBE_VF_SET_MAC_ADDR 0x02 /* VF requests PF to set MAC addr */
#define IXGBE_VF_SET_MULTICAST 0x03 /* VF requests PF to set MC addr */
#define IXGBE_VF_SET_VLAN 0x04 /* VF requests PF to set VLAN */
#define IXGBE_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
#define IXGBE_VF_SET_MACVLAN 0x06 /* VF requests PF for unicast filter */
/* mailbox API, version 1.0 VF requests */
#define IXGBE_VF_SET_LPE 0x05 /* VF requests PF to set VMOLR.LPE */
#define IXGBE_VF_SET_MACVLAN 0x06 /* VF requests PF for unicast filter */
#define IXGBE_VF_API_NEGOTIATE 0x08 /* negotiate API version */
/* length of permanent address message returned from PF */
#define IXGBE_VF_PERMADDR_MSG_LEN 4
......
......@@ -469,6 +469,9 @@ static inline void ixgbe_vf_reset_event(struct ixgbe_adapter *adapter, u32 vf)
ixgbe_set_rx_mode(adapter->netdev);
hw->mac.ops.clear_rar(hw, rar_entry);
/* reset VF api back to unknown */
adapter->vfinfo[vf].vf_api = ixgbe_mbox_api_10;
}
static int ixgbe_set_vf_mac(struct ixgbe_adapter *adapter,
......@@ -717,6 +720,24 @@ static int ixgbe_set_vf_macvlan_msg(struct ixgbe_adapter *adapter,
return err;
}
static int ixgbe_negotiate_vf_api(struct ixgbe_adapter *adapter,
u32 *msgbuf, u32 vf)
{
int api = msgbuf[1];
switch (api) {
case ixgbe_mbox_api_10:
adapter->vfinfo[vf].vf_api = api;
return 0;
default:
break;
}
e_info(drv, "VF %d requested invalid api version %u\n", vf, api);
return -1;
}
static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
{
u32 mbx_size = IXGBE_VFMAILBOX_SIZE;
......@@ -738,14 +759,13 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
/* flush the ack before we write any messages back */
IXGBE_WRITE_FLUSH(hw);
if (msgbuf[0] == IXGBE_VF_RESET)
return ixgbe_vf_reset_msg(adapter, vf);
/*
* until the vf completes a virtual function reset it should not be
* allowed to start any configuration.
*/
if (msgbuf[0] == IXGBE_VF_RESET)
return ixgbe_vf_reset_msg(adapter, vf);
if (!adapter->vfinfo[vf].clear_to_send) {
msgbuf[0] |= IXGBE_VT_MSGTYPE_NACK;
ixgbe_write_mbx(hw, msgbuf, 1, vf);
......@@ -768,6 +788,9 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
case IXGBE_VF_SET_MACVLAN:
retval = ixgbe_set_vf_macvlan_msg(adapter, msgbuf, vf);
break;
case IXGBE_VF_API_NEGOTIATE:
retval = ixgbe_negotiate_vf_api(adapter, msgbuf, vf);
break;
default:
e_err(drv, "Unhandled Msg %8.8x\n", msgbuf[0]);
retval = IXGBE_ERR_MBX;
......@@ -782,7 +805,7 @@ static int ixgbe_rcv_msg_from_vf(struct ixgbe_adapter *adapter, u32 vf)
msgbuf[0] |= IXGBE_VT_MSGTYPE_CTS;
ixgbe_write_mbx(hw, msgbuf, 1, vf);
ixgbe_write_mbx(hw, msgbuf, mbx_size, vf);
return retval;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册