提交 360a0cab 编写于 作者: R Rob Herring

ARM: move all dtb targets out of Makefile.boot

In preparation to support multi-platform kernels, move all the dtb targets
out of the mach Makefile.boot and into the arch/arm/boot/dts/Makefile
which is closer to the sources.

DTBs are only built when CONFIG_OF is enabled and now use top level
CONFIG_ARCH_xxx instead of chip or board specific config options.
Signed-off-by: NRob Herring <rob.herring@calxeda.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Andrew Victor <linux@maxim.org.za>
Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Cc: Sascha Hauer <kernel@pengutronix.de>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Acked-by: NShawn Guo <shawn.guo@linaro.org>
Cc: Viresh Kumar <viresh.linux@gmail.com>
Cc: Shiraz Hashim <shiraz.hashim@st.com>
Cc: Rajeev Kumar <rajeev-dlh.kumar@st.com>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
上级 59bba2a9
......@@ -15,6 +15,8 @@ ifneq ($(MACHINE),)
include $(srctree)/$(MACHINE)/Makefile.boot
endif
include $(srctree)/arch/arm/boot/dts/Makefile
# Note: the following conditions must always be true:
# ZRELADDR == virt_to_phys(PAGE_OFFSET + TEXT_OFFSET)
# PARAMS_PHYS must be within 4MB of ZRELADDR
......
ifeq ($(CONFIG_OF),y)
dtb-$(CONFIG_ARCH_AT91) += aks-cdu.dtb \
at91sam9263ek.dtb \
at91sam9g20ek_2mmc.dtb \
at91sam9g20ek.dtb \
at91sam9g25ek.dtb \
at91sam9m10g45ek.dtb \
at91sam9n12ek.dtb \
ethernut5.dtb \
evk-pro3.dtb \
kizbox.dtb \
tny_a9260.dtb \
tny_a9263.dtb \
tny_a9g20.dtb \
usb_a9260.dtb \
usb_a9263.dtb \
usb_a9g20.dtb
dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos5250-smdk5250.dtb
dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \
kirkwood-dns325.dtb \
kirkwood-dreamplug.dtb \
kirkwood-goflexnet.dtb \
kirkwood-ib62x0.dtb \
kirkwood-iconnect.dtb \
kirkwood-lschlv2.dtb \
kirkwood-lsxhl.dtb \
kirkwood-ts219-6281.dtb \
kirkwood-ts219-6282.dtb
dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \
armada-xp-db.dtb
dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
imx53-ard.dtb \
imx53-evk.dtb \
imx53-qsb.dtb \
imx53-smd.dtb \
imx6q-arm2.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb
dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
imx23-olinuxino.dtb \
imx23-stmp378x_devb.dtb \
imx28-apx4devkit.dtb \
imx28-cfa10036.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
imx28-tx28.dtb
dtb-$(CONFIG_ARCH_U8500) += snowball.dtb
dtb-$(CONFIG_ARCH_SPEAR13XX) += spear1310-evb.dtb \
spear1340-evb.dtb
dtb-$(CONFIG_ARCH_SPEAR3XX)+= spear300-evb.dtb \
spear310-evb.dtb \
spear320-evb.dtb
dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-paz00.dtb \
tegra20-seaboard.dtb \
tegra20-trimslice.dtb \
tegra20-ventana.dtb \
tegra20-whistler.dtb \
tegra30-cardhu.dtb
dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \
vexpress-v2p-ca9.dtb \
vexpress-v2p-ca15-tc1.dtb \
vexpress-v2p-ca15_a7.dtb
endif
......@@ -12,27 +12,3 @@ else
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
endif
# Keep dtb files sorted alphabetically for each SoC
# sam9260
dtb-$(CONFIG_MACH_AT91SAM_DT) += aks-cdu.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += ethernut5.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += evk-pro3.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9260.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9260.dtb
# sam9263
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9263ek.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9263.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9263.dtb
# sam9g20
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g20ek_2mmc.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += kizbox.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += tny_a9g20.dtb
dtb-$(CONFIG_MACH_AT91SAM_DT) += usb_a9g20.dtb
# sam9g45
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9m10g45ek.dtb
# sam9n12
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9n12ek.dtb
# sam9x5
dtb-$(CONFIG_MACH_AT91SAM_DT) += at91sam9g25ek.dtb
zreladdr-y += 0x40008000
params_phys-y := 0x40000100
dtb-$(CONFIG_MACH_EXYNOS4_DT) += exynos4210-origen.dtb exynos4210-smdkv310.dtb
dtb-$(CONFIG_MACH_EXYNOS5_DT) += exynos5250-smdk5250.dtb
......@@ -37,10 +37,3 @@ initrd_phys-$(CONFIG_SOC_IMX53) := 0x70800000
zreladdr-$(CONFIG_SOC_IMX6Q) += 0x10008000
params_phys-$(CONFIG_SOC_IMX6Q) := 0x10000100
initrd_phys-$(CONFIG_SOC_IMX6Q) := 0x10800000
dtb-$(CONFIG_MACH_IMX51_DT) += imx51-babbage.dtb
dtb-$(CONFIG_MACH_IMX53_DT) += imx53-ard.dtb imx53-evk.dtb \
imx53-qsb.dtb imx53-smd.dtb
dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
dtb-$(CONFIG_MACH_DREAMPLUG_DT) += kirkwood-dreamplug.dtb
dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns320.dtb
dtb-$(CONFIG_MACH_DLINK_KIRKWOOD_DT) += kirkwood-dns325.dtb
dtb-$(CONFIG_MACH_ICONNECT_DT) += kirkwood-iconnect.dtb
dtb-$(CONFIG_MACH_IB62X0_DT) += kirkwood-ib62x0.dtb
dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6281.dtb
dtb-$(CONFIG_MACH_TS219_DT) += kirkwood-ts219-6282.dtb
dtb-$(CONFIG_MACH_GOFLEXNET_DT) += kirkwood-goflexnet.dtb
dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lschlv2.dtb
dtb-$(CONFIG_MACH_LSXL_DT) += kirkwood-lsxhl.dtb
zreladdr-y += 0x80008000
params_phys-y := 0x80000100
initrd_phys-y := 0x82000000
dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb
zreladdr-y := 0x00008000
dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-370-db.dtb
dtb-$(CONFIG_MACH_ARMADA_370_XP) += armada-xp-db.dtb
zreladdr-y += 0x40008000
dtb-y += imx23-evk.dtb \
imx23-olinuxino.dtb \
imx23-stmp378x_devb.dtb \
imx28-apx4devkit.dtb \
imx28-cfa10036.dtb \
imx28-evk.dtb \
imx28-m28evk.dtb \
imx28-tx28.dtb \
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
dtb-$(CONFIG_MACH_SPEAR1310) += spear1310-evb.dtb
dtb-$(CONFIG_MACH_SPEAR1340) += spear1340-evb.dtb
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
dtb-$(CONFIG_MACH_SPEAR300) += spear300-evb.dtb
dtb-$(CONFIG_MACH_SPEAR310) += spear310-evb.dtb
dtb-$(CONFIG_MACH_SPEAR320) += spear320-evb.dtb
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
dtb-$(CONFIG_BOARD_SPEAR600_DT) += spear600-evb.dtb
zreladdr-$(CONFIG_ARCH_TEGRA_2x_SOC) += 0x00008000
params_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00000100
initrd_phys-$(CONFIG_ARCH_TEGRA_2x_SOC) := 0x00800000
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-harmony.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-paz00.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-seaboard.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-trimslice.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-ventana.dtb
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += tegra20-whistler.dtb
dtb-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30-cardhu.dtb
zreladdr-y += 0x00008000
params_phys-y := 0x00000100
initrd_phys-y := 0x00800000
dtb-$(CONFIG_MACH_SNOWBALL) += snowball.dtb
......@@ -3,8 +3,3 @@
zreladdr-y += 0x60008000
params_phys-y := 0x60000100
initrd_phys-y := 0x60800000
dtb-$(CONFIG_ARCH_VEXPRESS_DT) += vexpress-v2p-ca5s.dtb \
vexpress-v2p-ca9.dtb \
vexpress-v2p-ca15-tc1.dtb \
vexpress-v2p-ca15_a7.dtb
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册