提交 357d5946 编写于 作者: P Paul Mundt

sh: Tidy up dependencies for SH-2 build.

SH-2 can presently get in to some pretty bogus states, so
we tidy up the dependencies a bit and get it all building
again.

This gets us a bit closer to a functional allyesconfig
and allmodconfig, though there are still a few things to
fix up.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
上级 54039591
......@@ -55,8 +55,21 @@ config GENERIC_TIME
config GENERIC_CLOCKEVENTS
def_bool n
config SYS_SUPPORTS_PM
bool
config SYS_SUPPORTS_APM_EMULATION
bool
select SYS_SUPPORTS_PM
config SYS_SUPPORTS_SMP
bool
config SYS_SUPPORTS_NUMA
bool
config SYS_SUPPORTS_PCI
bool
config ARCH_MAY_HAVE_PC_FDC
bool
......@@ -102,7 +115,7 @@ endchoice
config SH_FPU
bool "FPU support"
depends on !CPU_SH3
depends on CPU_SH4
default y
help
Selecting this option will enable support for SH processors that
......@@ -236,6 +249,7 @@ config SH_7751_SOLUTION_ENGINE
config SH_7780_SOLUTION_ENGINE
bool "SolutionEngine7780"
select SOLUTION_ENGINE
select SYS_SUPPORTS_PCI
depends on CPU_SUBTYPE_SH7780
help
Select 7780 SolutionEngine if configuring for a Renesas SH7780
......@@ -275,20 +289,16 @@ config SH_7751_SYSTEMH
config SH_HP6XX
bool "HP6XX"
select SYS_SUPPORTS_APM_EMULATION
select HD6446X_SERIES
depends on CPU_SUBTYPE_SH7709
help
Select HP6XX if configuring for a HP jornada HP6xx.
More information (hardware only) at
<http://www.hp.com/jornada/>.
config SH_SATURN
bool "Saturn"
depends on CPU_SUBTYPE_SH7604
help
Select Saturn if configuring for a SEGA Saturn.
config SH_DREAMCAST
bool "Dreamcast"
select SYS_SUPPORTS_PCI
depends on CPU_SUBTYPE_SH7091
help
Select Dreamcast if configuring for a SEGA Dreamcast.
......@@ -307,6 +317,7 @@ config SH_MPC1211
config SH_SH03
bool "Interface CTP/PCI-SH03"
depends on CPU_SUBTYPE_SH7751 && BROKEN
select SYS_SUPPORTS_PCI
help
CTP/PCI-SH03 is a CPU module computer that is produced
by Interface Corporation.
......@@ -315,6 +326,7 @@ config SH_SH03
config SH_SECUREEDGE5410
bool "SecureEdge5410"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
help
Select SecureEdge5410 if configuring for a SnapGear SH board.
This includes both the OEM SecureEdge products as well as the
......@@ -337,6 +349,7 @@ config SH_7710VOIPGW
config SH_RTS7751R2D
bool "RTS7751R2D"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
help
Select RTS7751R2D if configuring for a Renesas Technology
Sales SH-Graphics board.
......@@ -344,6 +357,7 @@ config SH_RTS7751R2D
config SH_HIGHLANDER
bool "Highlander"
depends on CPU_SUBTYPE_SH7780 || CPU_SUBTYPE_SH7785
select SYS_SUPPORTS_PCI
config SH_EDOSK7705
bool "EDOSK7705"
......@@ -359,12 +373,14 @@ config SH_SH4202_MICRODEV
config SH_LANDISK
bool "LANDISK"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
help
I-O DATA DEVICE, INC. "LANDISK Series" support.
config SH_TITAN
bool "TITAN"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
help
Select Titan if you are configuring for a Nimble Microsystems
NetEngine NP51R.
......@@ -378,6 +394,7 @@ config SH_SHMIN
config SH_LBOX_RE2
bool "L-BOX RE2"
depends on CPU_SUBTYPE_SH7751R
select SYS_SUPPORTS_PCI
help
Select L-BOX RE2 if configuring for the NTT COMWARE L-BOX RE2.
......@@ -481,8 +498,10 @@ config SH_PCLK_FREQ
config SH_CLK_MD
int "CPU Mode Pin Setting"
default 0
depends on CPU_SUBTYPE_SH7619 || CPU_SUBTYPE_SH7206
default 6 if CPU_SUBTYPE_SH7206
default 5 if CPU_SUBTYPE_SH7619
default 0
help
MD2 - MD0 pin setting.
......@@ -554,6 +573,7 @@ config CRASH_DUMP
config SMP
bool "Symmetric multi-processing support"
depends on SYS_SUPPORTS_SMP
---help---
This enables support for systems with more than one CPU. If you have
a system with only one CPU, like most personal computers, say N. If
......@@ -617,6 +637,7 @@ config BOOT_LINK_OFFSET
config UBC_WAKEUP
bool "Wakeup UBC on startup"
depends on CPU_SH4
help
Selecting this option will wakeup the User Break Controller (UBC) on
startup. Although the UBC is left in an awake state when the processor
......@@ -645,8 +666,8 @@ menu "Bus options"
# we're not using PCMCIA, so we make it dependent on
# PCMCIA outright. -- PFM.
config ISA
bool
default y if PCMCIA
def_bool y
depends on PCMCIA && HD6446X_SERIES
help
Find out whether you have ISA slots on your motherboard. ISA is the
name of a bus system, i.e. the way the CPU talks to the other stuff
......@@ -701,7 +722,7 @@ source "fs/Kconfig.binfmt"
endmenu
menu "Power management options (EXPERIMENTAL)"
depends on EXPERIMENTAL
depends on EXPERIMENTAL && SYS_SUPPORTS_PM
source kernel/power/Kconfig
......
......@@ -86,6 +86,7 @@ config SH_KGDB
bool "Include KGDB kernel debugger"
select FRAME_POINTER
select DEBUG_INFO
depends on CPU_SH3 || CPU_SH4
help
Include in-kernel hooks for kgdb, the Linux kernel source level
debugger. See <http://kgdb.sourceforge.net/> for more information.
......
......@@ -13,10 +13,8 @@ config VOYAGERGX
are additional GPIO bits that can be used to interface to
external as well.
# A board must have defined HD6446X_SERIES in order to see these
config HD6446X_SERIES
bool "HD6446x support"
default n
bool
choice
prompt "HD6446x options"
......@@ -25,7 +23,6 @@ choice
config HD64461
bool "Hitachi HD64461 companion chip support"
depends on CPU_SUBTYPE_SH7709
---help---
The Hitachi HD64461 provides an interface for
the SH7709 CPU, supporting a LCD controller,
......@@ -40,7 +37,6 @@ config HD64461
config HD64465
bool "Hitachi HD64465 companion chip support"
depends on CPU_SUBTYPE_SH7750
---help---
The Hitachi HD64465 provides an interface for
the SH7750 CPU, supporting a LCD controller,
......
config PCI
bool "PCI support"
depends on SYS_SUPPORTS_PCI
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
......
......@@ -21,8 +21,7 @@
#include <asm/cacheflush.h>
#include <asm/cache.h>
#include <asm/io.h>
extern void detect_cpu_and_cache_system(void);
#include <asm/ubc.h>
/*
* Generic wrapper for command line arguments to disable on-chip
......@@ -152,15 +151,6 @@ static void __init cache_init(void)
flags |= CCR_CACHE_CB;
#endif
#ifdef CONFIG_SH_OCRAM
/* Turn on OCRAM -- halve the OC */
flags |= CCR_CACHE_ORA;
current_cpu_data.dcache.sets >>= 1;
current_cpu_data.dcache.way_size = current_cpu_data.dcache.sets *
current_cpu_data.dcache.linesz;
#endif
ctrl_outl(flags, CCR);
back_to_P1();
}
......@@ -269,7 +259,6 @@ asmlinkage void __init sh_cpu_init(void)
}
#endif
#ifdef CONFIG_UBC_WAKEUP
/*
* Some brain-damaged loaders decided it would be a good idea to put
* the UBC to sleep. This causes some issues when it comes to things
......@@ -277,7 +266,5 @@ asmlinkage void __init sh_cpu_init(void)
* we wake it up and hope that all is well.
*/
ubc_wakeup();
#endif
speculative_execution_init();
}
......@@ -9,9 +9,8 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#include <linux/init.h>
#include <linux/smp.h>
#include <asm/processor.h>
#include <asm/cache.h>
......
......@@ -320,9 +320,7 @@ static void ubc_set_tracing(int asid, unsigned long pc)
ctrl_outl(pc, UBC_BARA);
#ifdef CONFIG_MMU
/* We don't have any ASID settings for the SH-2! */
if (current_cpu_data.type != CPU_SH7604)
ctrl_outb(asid, UBC_BASRA);
ctrl_outb(asid, UBC_BASRA);
#endif
ctrl_outl(0, UBC_BAMRA);
......
......@@ -48,6 +48,7 @@ choice
config CPU_SUBTYPE_SH7619
bool "Support SH7619 processor"
select CPU_SH2
select CPU_HAS_IPR_IRQ
# SH-2A Processor Support
......@@ -208,6 +209,7 @@ config CPU_SUBTYPE_SH7722
select CPU_SHX2
select CPU_HAS_IPR_IRQ
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
endchoice
......@@ -292,7 +294,7 @@ config VSYSCALL
config NUMA
bool "Non Uniform Memory Access (NUMA) Support"
depends on MMU && SPARSEMEM && EXPERIMENTAL
depends on MMU && SYS_SUPPORTS_NUMA && EXPERIMENTAL
default n
help
Some SH systems have many various memories scattered around
......@@ -308,6 +310,7 @@ config NODES_SHIFT
config ARCH_FLATMEM_ENABLE
def_bool y
depends on !NUMA
config ARCH_SPARSEMEM_ENABLE
def_bool y
......@@ -419,15 +422,4 @@ config SH_WRITETHROUGH
If unsure, say N.
config SH_OCRAM
bool "Operand Cache RAM (OCRAM) support"
help
Selecting this option will automatically tear down the number of
sets in the dcache by half, which in turn exposes a memory range.
The addresses for the OC RAM base will vary according to the
processor version. Consult vendor documentation for specifics.
If unsure, say N.
endmenu
......@@ -300,6 +300,7 @@ int remove_memory(u64 start, u64 size)
}
EXPORT_SYMBOL_GPL(remove_memory);
#ifdef CONFIG_NUMA
int memory_add_physaddr_to_nid(u64 addr)
{
/* Node 0 for now.. */
......@@ -307,3 +308,4 @@ int memory_add_physaddr_to_nid(u64 addr)
}
EXPORT_SYMBOL_GPL(memory_add_physaddr_to_nid);
#endif
#endif
......@@ -9,6 +9,7 @@
#define __ASM_SH_CACHE_H
#ifdef __KERNEL__
#include <linux/init.h>
#include <asm/cpu/cache.h>
#define SH_CACHE_VALID 1
......@@ -48,6 +49,9 @@ struct cache_info {
unsigned long flags;
};
int __init detect_cpu_and_cache_system(void);
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* __ASM_SH_CACHE_H */
......@@ -184,7 +184,7 @@
#define HD64461_NIRR 0x15000
#define HD64461_NIMR 0x15002
#define HD64461_IRQBASE OFFCHIP_IRQ_BASE
#define HD64461_IRQBASE 64
#define HD64461_IRQ_NUM 16
#define HD64461_IRQ_UART (HD64461_IRQBASE+5)
......
......@@ -228,11 +228,7 @@ static __inline__ void grab_fpu(struct pt_regs *regs)
regs->sr &= ~SR_FD;
}
#ifdef CONFIG_CPU_SH4
extern void save_fpu(struct task_struct *__tsk, struct pt_regs *regs);
#else
#define save_fpu(tsk) do { } while (0)
#endif
#define unlazy_fpu(tsk, regs) do { \
if (test_tsk_thread_flag(tsk, TIF_USEDFPU)) { \
......
......@@ -126,7 +126,7 @@ static inline void sched_cacheflush(void)
#define smp_read_barrier_depends() do { } while(0)
#endif
#define set_mb(var, value) do { xchg(&var, value); } while (0)
#define set_mb(var, value) do { (void)xchg(&var, value); } while (0)
/*
* Jump to P2 area.
......
......@@ -51,9 +51,14 @@
#define BRCR_UBDE (1 << 0)
#ifndef __ASSEMBLY__
/* arch/sh/kernel/ubc.S */
extern void ubc_wakeup(void);
/* arch/sh/kernel/cpu/ubc.S */
extern void ubc_sleep(void);
#ifdef CONFIG_UBC_WAKEUP
extern void ubc_wakeup(void);
#else
#define ubc_wakeup() do { } while (0)
#endif
#endif
#endif /* __KERNEL__ */
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册