提交 35398ee3 编写于 作者: L Linus Torvalds

Merge tag 'regulator-fix-v4.7-rc2' of...

Merge tag 'regulator-fix-v4.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Some driver specific fixes for the regulator subsystem:

   - Some of the changes to the core that were merged in the last merge
     window exposed the fact that the qcom-smd driver hadn't implemented
     the voltage enumeration interfaces like it should.  Since it's a
     simple driver specific fix to implement them do that.

   - Fix the ramp delay configuration for tps51632"

* tag 'regulator-fix-v4.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom_smd: add list_voltage callback
  regulator: qcom_smd: add regulator ops for pm8941 lnldo
  regulator: qcom_smd: add list_voltage callback
  regulator: tps51632: Fix setting ramp delay
......@@ -140,6 +140,19 @@ static const struct regulator_ops rpm_smps_ldo_ops = {
.enable = rpm_reg_enable,
.disable = rpm_reg_disable,
.is_enabled = rpm_reg_is_enabled,
.list_voltage = regulator_list_voltage_linear_range,
.get_voltage = rpm_reg_get_voltage,
.set_voltage = rpm_reg_set_voltage,
.set_load = rpm_reg_set_load,
};
static const struct regulator_ops rpm_smps_ldo_ops_fixed = {
.enable = rpm_reg_enable,
.disable = rpm_reg_disable,
.is_enabled = rpm_reg_is_enabled,
.list_voltage = regulator_list_voltage_linear_range,
.get_voltage = rpm_reg_get_voltage,
.set_voltage = rpm_reg_set_voltage,
......@@ -247,7 +260,7 @@ static const struct regulator_desc pm8941_nldo = {
static const struct regulator_desc pm8941_lnldo = {
.fixed_uV = 1740000,
.n_voltages = 1,
.ops = &rpm_smps_ldo_ops,
.ops = &rpm_smps_ldo_ops_fixed,
};
static const struct regulator_desc pm8941_switch = {
......
......@@ -94,11 +94,14 @@ static int tps51632_dcdc_set_ramp_delay(struct regulator_dev *rdev,
int ramp_delay)
{
struct tps51632_chip *tps = rdev_get_drvdata(rdev);
int bit = ramp_delay/6000;
int bit;
int ret;
if (bit)
bit--;
if (ramp_delay == 0)
bit = 0;
else
bit = DIV_ROUND_UP(ramp_delay, 6000) - 1;
ret = regmap_write(tps->regmap, TPS51632_SLEW_REGS, BIT(bit));
if (ret < 0)
dev_err(tps->dev, "SLEW reg write failed, err %d\n", ret);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册