提交 34411b68 编写于 作者: T Thanneeru Srinivasulu 提交者: David S. Miller

net: thunderx: Incorporate pass2 silicon CPI index configuration changes

Add support for ThunderX pass2 CPI and MPI configuration changes.
MPI_ALG is not enabled i.e MCAM parsing is disabled.
Signed-off-by: NThanneeru Srinivasulu <tsrinivasulu@caviumnetworks.com>
Signed-off-by: NSunil Goutham <sgoutham@cavium.com>
Signed-off-by: NDavid Daney <david.daney@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 88ed2377
......@@ -43,6 +43,7 @@ struct nicpf {
u8 duplex[MAX_LMAC];
u32 speed[MAX_LMAC];
u16 cpi_base[MAX_NUM_VFS_SUPPORTED];
u16 rssi_base[MAX_NUM_VFS_SUPPORTED];
u16 rss_ind_tbl_size;
bool mbx_lock[MAX_NUM_VFS_SUPPORTED];
......@@ -396,8 +397,18 @@ static void nic_config_cpi(struct nicpf *nic, struct cpi_cfg_msg *cfg)
padd = cpi % 8; /* 3 bits CS out of 6bits DSCP */
/* Leave RSS_SIZE as '0' to disable RSS */
nic_reg_write(nic, NIC_PF_CPI_0_2047_CFG | (cpi << 3),
(vnic << 24) | (padd << 16) | (rssi_base + rssi));
if (pass1_silicon(nic)) {
nic_reg_write(nic, NIC_PF_CPI_0_2047_CFG | (cpi << 3),
(vnic << 24) | (padd << 16) |
(rssi_base + rssi));
} else {
/* Set MPI_ALG to '0' to disable MCAM parsing */
nic_reg_write(nic, NIC_PF_CPI_0_2047_CFG | (cpi << 3),
(padd << 16));
/* MPI index is same as CPI if MPI_ALG is not enabled */
nic_reg_write(nic, NIC_PF_MPI_0_2047_CFG | (cpi << 3),
(vnic << 24) | (rssi_base + rssi));
}
if ((rssi + 1) >= cfg->rq_cnt)
continue;
......@@ -410,6 +421,7 @@ static void nic_config_cpi(struct nicpf *nic, struct cpi_cfg_msg *cfg)
rssi = ((cpi - cpi_base) & 0x38) >> 3;
}
nic->cpi_base[cfg->vf_id] = cpi_base;
nic->rssi_base[cfg->vf_id] = rssi_base;
}
/* Responsds to VF with its RSS indirection table size */
......@@ -435,10 +447,9 @@ static void nic_config_rss(struct nicpf *nic, struct rss_cfg_msg *cfg)
{
u8 qset, idx = 0;
u64 cpi_cfg, cpi_base, rssi_base, rssi;
u64 idx_addr;
cpi_base = nic->cpi_base[cfg->vf_id];
cpi_cfg = nic_reg_read(nic, NIC_PF_CPI_0_2047_CFG | (cpi_base << 3));
rssi_base = (cpi_cfg & 0x0FFF) + cfg->tbl_offset;
rssi_base = nic->rssi_base[cfg->vf_id] + cfg->tbl_offset;
rssi = rssi_base;
qset = cfg->vf_id;
......@@ -455,9 +466,15 @@ static void nic_config_rss(struct nicpf *nic, struct rss_cfg_msg *cfg)
idx++;
}
cpi_base = nic->cpi_base[cfg->vf_id];
if (pass1_silicon(nic))
idx_addr = NIC_PF_CPI_0_2047_CFG;
else
idx_addr = NIC_PF_MPI_0_2047_CFG;
cpi_cfg = nic_reg_read(nic, idx_addr | (cpi_base << 3));
cpi_cfg &= ~(0xFULL << 20);
cpi_cfg |= (cfg->hash_bits << 20);
nic_reg_write(nic, NIC_PF_CPI_0_2047_CFG | (cpi_base << 3), cpi_cfg);
nic_reg_write(nic, idx_addr | (cpi_base << 3), cpi_cfg);
}
/* 4 level transmit side scheduler configutation
......
......@@ -85,7 +85,11 @@
#define NIC_PF_ECC3_DBE_INT_W1S (0x2708)
#define NIC_PF_ECC3_DBE_ENA_W1C (0x2710)
#define NIC_PF_ECC3_DBE_ENA_W1S (0x2718)
#define NIC_PF_MCAM_0_191_ENA (0x100000)
#define NIC_PF_MCAM_0_191_M_0_5_DATA (0x110000)
#define NIC_PF_MCAM_CTRL (0x120000)
#define NIC_PF_CPI_0_2047_CFG (0x200000)
#define NIC_PF_MPI_0_2047_CFG (0x210000)
#define NIC_PF_RSSI_0_4097_RQ (0x220000)
#define NIC_PF_LMAC_0_7_CFG (0x240000)
#define NIC_PF_LMAC_0_7_SW_XOFF (0x242000)
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册