提交 331a5ad2 编写于 作者: R Randy Dunlap 提交者: Bartlomiej Zolnierkiewicz

ide: move ide.txt to Documentation/ide/

Cleanup some of Documentation directory:
Move Documentation/ide.txt to the ide/ sub-directory.
Fix trailing whitespace while there.
Signed-off-by: NRandy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>
上级 0c6025d4
......@@ -3,11 +3,11 @@
==============================================================================
The hdparm utility can be used to control various IDE features on a
running system. It is packaged separately. Please Look for it on popular
linux FTP sites.
*** IMPORTANT NOTICES: BUGGY IDE CHIPSETS CAN CORRUPT DATA!!
......@@ -51,7 +51,7 @@ Common pitfalls:
================================================================================
This is the multiple IDE interface driver, as evolved from hd.c.
This is the multiple IDE interface driver, as evolved from hd.c.
It supports up to 9 IDE interfaces per default, on one or more IRQs (usually
14 & 15). There can be up to two drives per interface, as per the ATA-6 spec.
......@@ -215,17 +215,17 @@ Summary of ide driver parameters for kernel command line
--------------------------------------------------------
"hdx=" is recognized for all "x" from "a" to "h", such as "hdc".
"idex=" is recognized for all "x" from "0" to "3", such as "ide1".
"hdx=noprobe" : drive may be present, but do not probe for it
"hdx=none" : drive is NOT present, ignore cmos and do not probe
"hdx=nowerr" : ignore the WRERR_STAT bit on this drive
"hdx=cdrom" : drive is present, and is a cdrom drive
"hdx=cyl,head,sect" : disk drive is present, with specified geometry
"hdx=remap" : remap access of sector 0 to sector 1 (for EZDrive)
......@@ -261,7 +261,7 @@ Summary of ide driver parameters for kernel command line
"idex=base" : probe for an interface at the addr specified,
where "base" is usually 0x1f0 or 0x170
and "ctl" is assumed to be "base"+0x206
"idex=base,ctl" : specify both base and ctl
"idex=base,ctl,irq" : specify base, ctl, and irq number
......@@ -272,7 +272,7 @@ Summary of ide driver parameters for kernel command line
to take effect.
"idex=four" : four drives on idex and ide(x^1) share same ports
"idex=reset" : reset interface after probe
"idex=ata66" : informs the interface that it has an 80c cable
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册