提交 2ef444f1 编写于 作者: C Chao Peng 提交者: Paolo Bonzini

KVM: x86: Add Intel PT context switch for each vcpu

Load/Store Intel Processor Trace register in context switch.
MSR IA32_RTIT_CTL is loaded/stored automatically from VMCS.
In Host-Guest mode, we need load/resore PT MSRs only when PT
is enabled in guest.
Signed-off-by: NChao Peng <chao.p.peng@linux.intel.com>
Signed-off-by: NLuwei Kang <luwei.kang@intel.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
上级 86f5201d
......@@ -936,6 +936,69 @@ static unsigned long segment_base(u16 selector)
}
#endif
static inline void pt_load_msr(struct pt_ctx *ctx, u32 addr_range)
{
u32 i;
wrmsrl(MSR_IA32_RTIT_STATUS, ctx->status);
wrmsrl(MSR_IA32_RTIT_OUTPUT_BASE, ctx->output_base);
wrmsrl(MSR_IA32_RTIT_OUTPUT_MASK, ctx->output_mask);
wrmsrl(MSR_IA32_RTIT_CR3_MATCH, ctx->cr3_match);
for (i = 0; i < addr_range; i++) {
wrmsrl(MSR_IA32_RTIT_ADDR0_A + i * 2, ctx->addr_a[i]);
wrmsrl(MSR_IA32_RTIT_ADDR0_B + i * 2, ctx->addr_b[i]);
}
}
static inline void pt_save_msr(struct pt_ctx *ctx, u32 addr_range)
{
u32 i;
rdmsrl(MSR_IA32_RTIT_STATUS, ctx->status);
rdmsrl(MSR_IA32_RTIT_OUTPUT_BASE, ctx->output_base);
rdmsrl(MSR_IA32_RTIT_OUTPUT_MASK, ctx->output_mask);
rdmsrl(MSR_IA32_RTIT_CR3_MATCH, ctx->cr3_match);
for (i = 0; i < addr_range; i++) {
rdmsrl(MSR_IA32_RTIT_ADDR0_A + i * 2, ctx->addr_a[i]);
rdmsrl(MSR_IA32_RTIT_ADDR0_B + i * 2, ctx->addr_b[i]);
}
}
static void pt_guest_enter(struct vcpu_vmx *vmx)
{
if (pt_mode == PT_MODE_SYSTEM)
return;
/* Save host state before VM entry */
rdmsrl(MSR_IA32_RTIT_CTL, vmx->pt_desc.host.ctl);
/*
* Set guest state of MSR_IA32_RTIT_CTL MSR (PT will be disabled
* on VM entry when it has been disabled in guest before).
*/
vmcs_write64(GUEST_IA32_RTIT_CTL, vmx->pt_desc.guest.ctl);
if (vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) {
wrmsrl(MSR_IA32_RTIT_CTL, 0);
pt_save_msr(&vmx->pt_desc.host, vmx->pt_desc.addr_range);
pt_load_msr(&vmx->pt_desc.guest, vmx->pt_desc.addr_range);
}
}
static void pt_guest_exit(struct vcpu_vmx *vmx)
{
if (pt_mode == PT_MODE_SYSTEM)
return;
if (vmx->pt_desc.guest.ctl & RTIT_CTL_TRACEEN) {
pt_save_msr(&vmx->pt_desc.guest, vmx->pt_desc.addr_range);
pt_load_msr(&vmx->pt_desc.host, vmx->pt_desc.addr_range);
}
/* Reload host state (IA32_RTIT_CTL will be cleared on VM exit). */
wrmsrl(MSR_IA32_RTIT_CTL, vmx->pt_desc.host.ctl);
}
void vmx_prepare_switch_to_guest(struct kvm_vcpu *vcpu)
{
struct vcpu_vmx *vmx = to_vmx(vcpu);
......@@ -3814,6 +3877,13 @@ static void vmx_vcpu_setup(struct vcpu_vmx *vmx)
if (cpu_has_vmx_encls_vmexit())
vmcs_write64(ENCLS_EXITING_BITMAP, -1ull);
if (pt_mode == PT_MODE_HOST_GUEST) {
memset(&vmx->pt_desc, 0, sizeof(vmx->pt_desc));
/* Bit[6~0] are forced to 1, writes are ignored. */
vmx->pt_desc.guest.output_mask = 0x7F;
vmcs_write64(GUEST_IA32_RTIT_CTL, 0);
}
}
static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
......@@ -6115,6 +6185,8 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
vcpu->arch.pkru != vmx->host_pkru)
__write_pkru(vcpu->arch.pkru);
pt_guest_enter(vmx);
atomic_switch_perf_msrs(vmx);
vmx_update_hv_timer(vcpu);
......@@ -6314,6 +6386,8 @@ static void __noclone vmx_vcpu_run(struct kvm_vcpu *vcpu)
| (1 << VCPU_EXREG_CR3));
vcpu->arch.regs_dirty = 0;
pt_guest_exit(vmx);
/*
* eager fpu is enabled if PKEY is supported and CR4 is switched
* back on host, so it is safe to read guest PKRU from current
......
......@@ -66,6 +66,25 @@ struct pi_desc {
u32 rsvd[6];
} __aligned(64);
#define RTIT_ADDR_RANGE 4
struct pt_ctx {
u64 ctl;
u64 status;
u64 output_base;
u64 output_mask;
u64 cr3_match;
u64 addr_a[RTIT_ADDR_RANGE];
u64 addr_b[RTIT_ADDR_RANGE];
};
struct pt_desc {
u64 ctl_bitmask;
u32 addr_range;
u32 caps[PT_CPUID_REGS_NUM * PT_CPUID_LEAVES];
struct pt_ctx host;
struct pt_ctx guest;
};
/*
* The nested_vmx structure is part of vcpu_vmx, and holds information we need
......@@ -249,6 +268,8 @@ struct vcpu_vmx {
u64 msr_ia32_feature_control;
u64 msr_ia32_feature_control_valid_bits;
u64 ept_pointer;
struct pt_desc pt_desc;
};
enum ept_pointers_status {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册