tty: serial: xuartps: Wait for rx and tx reset done status

After issuing the reset, driver is not checking the rx and tx reset
done status. So, modified driver to wait for the reset done status.
Signed-off-by: NNava kishore Manne <navam@xilinx.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/tty/serial/xilinx_uartps.c

@@ -694,6 +694,10 @@ static void cdns_uart_set_termios(struct uart_port *port,
 	ctrl_reg |= CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST;
 	writel(ctrl_reg, port->membase + CDNS_UART_CR);
 
+	while (readl(port->membase + CDNS_UART_CR) &
+		(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
+		cpu_relax();
+
 	/*
 	 * Clear the RX disable and TX disable bits and then set the TX enable
 	 * bit and RX enable bit to enable the transmitter and receiver.
@@ -797,6 +801,10 @@ static int cdns_uart_startup(struct uart_port *port)
 	writel(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST,
 			port->membase + CDNS_UART_CR);
 
+	while (readl(port->membase + CDNS_UART_CR) &
+		(CDNS_UART_CR_TXRST | CDNS_UART_CR_RXRST))
+		cpu_relax();
+
 	/*
 	 * Clear the RX disable bit and then set the RX enable bit to enable
 	 * the receiver.