提交 279f438e 编写于 作者: P Paul Durrant 提交者: David S. Miller

xen-netback: Don't destroy the netdev until the vif is shut down

Without this patch, if a frontend cycles through states Closing
and Closed (which Windows frontends need to do) then the netdev
will be destroyed and requires re-invocation of hotplug scripts
to restore state before the frontend can move to Connected. Thus
when udev is not in use the backend gets stuck in InitWait.

With this patch, the netdev is left alone whilst the backend is
still online and is only de-registered and freed just prior to
destroying the vif (which is also nicely symmetrical with the
netdev allocation and registration being done during probe) so
no re-invocation of hotplug scripts is required.
Signed-off-by: NPaul Durrant <paul.durrant@citrix.com>
Cc: David Vrabel <david.vrabel@citrix.com>
Cc: Wei Liu <wei.liu2@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Acked-by: NWei Liu <wei.liu2@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 bd784a14
......@@ -184,6 +184,7 @@ int xenvif_connect(struct xenvif *vif, unsigned long tx_ring_ref,
unsigned long rx_ring_ref, unsigned int tx_evtchn,
unsigned int rx_evtchn);
void xenvif_disconnect(struct xenvif *vif);
void xenvif_free(struct xenvif *vif);
int xenvif_xenbus_init(void);
void xenvif_xenbus_fini(void);
......
......@@ -353,6 +353,9 @@ struct xenvif *xenvif_alloc(struct device *parent, domid_t domid,
}
netdev_dbg(dev, "Successfully created xenvif\n");
__module_get(THIS_MODULE);
return vif;
}
......@@ -366,8 +369,6 @@ int xenvif_connect(struct xenvif *vif, unsigned long tx_ring_ref,
if (vif->tx_irq)
return 0;
__module_get(THIS_MODULE);
err = xenvif_map_frontend_rings(vif, tx_ring_ref, rx_ring_ref);
if (err < 0)
goto err;
......@@ -452,12 +453,6 @@ void xenvif_carrier_off(struct xenvif *vif)
void xenvif_disconnect(struct xenvif *vif)
{
/* Disconnect funtion might get called by generic framework
* even before vif connects, so we need to check if we really
* need to do a module_put.
*/
int need_module_put = 0;
if (netif_carrier_ok(vif->dev))
xenvif_carrier_off(vif);
......@@ -468,23 +463,22 @@ void xenvif_disconnect(struct xenvif *vif)
unbind_from_irqhandler(vif->tx_irq, vif);
unbind_from_irqhandler(vif->rx_irq, vif);
}
/* vif->irq is valid, we had a module_get in
* xenvif_connect.
*/
need_module_put = 1;
vif->tx_irq = 0;
}
if (vif->task)
kthread_stop(vif->task);
xenvif_unmap_frontend_rings(vif);
}
void xenvif_free(struct xenvif *vif)
{
netif_napi_del(&vif->napi);
unregister_netdev(vif->dev);
xenvif_unmap_frontend_rings(vif);
free_netdev(vif->dev);
if (need_module_put)
module_put(THIS_MODULE);
module_put(THIS_MODULE);
}
......@@ -42,7 +42,7 @@ static int netback_remove(struct xenbus_device *dev)
if (be->vif) {
kobject_uevent(&dev->dev.kobj, KOBJ_OFFLINE);
xenbus_rm(XBT_NIL, dev->nodename, "hotplug-status");
xenvif_disconnect(be->vif);
xenvif_free(be->vif);
be->vif = NULL;
}
kfree(be);
......@@ -213,9 +213,18 @@ static void disconnect_backend(struct xenbus_device *dev)
{
struct backend_info *be = dev_get_drvdata(&dev->dev);
if (be->vif)
xenvif_disconnect(be->vif);
}
static void destroy_backend(struct xenbus_device *dev)
{
struct backend_info *be = dev_get_drvdata(&dev->dev);
if (be->vif) {
kobject_uevent(&dev->dev.kobj, KOBJ_OFFLINE);
xenbus_rm(XBT_NIL, dev->nodename, "hotplug-status");
xenvif_disconnect(be->vif);
xenvif_free(be->vif);
be->vif = NULL;
}
}
......@@ -246,14 +255,11 @@ static void frontend_changed(struct xenbus_device *dev,
case XenbusStateConnected:
if (dev->state == XenbusStateConnected)
break;
backend_create_xenvif(be);
if (be->vif)
connect(be);
break;
case XenbusStateClosing:
if (be->vif)
kobject_uevent(&dev->dev.kobj, KOBJ_OFFLINE);
disconnect_backend(dev);
xenbus_switch_state(dev, XenbusStateClosing);
break;
......@@ -262,6 +268,7 @@ static void frontend_changed(struct xenbus_device *dev,
xenbus_switch_state(dev, XenbusStateClosed);
if (xenbus_dev_is_online(dev))
break;
destroy_backend(dev);
/* fall through if not online */
case XenbusStateUnknown:
device_unregister(&dev->dev);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册