提交 277cb103 编写于 作者: L Lennert Buytenhek 提交者: Linus Torvalds

[PATCH] cs89x0: fix up after pnx0105 Kconfig symbol renaming

The Kconfig symbol for pnx0105 was recently renamed to ARCH_PNX010X.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Cc: dmitry pervushin <dpervushin@ru.mvista.com>
Cc: <dsaxena@plexity.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
上级 37610ff3
......@@ -175,7 +175,7 @@ static unsigned int cs8900_irq_map[] = {1,0,0,0};
#include <asm/irq.h>
static unsigned int netcard_portlist[] __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
#elif defined(CONFIG_ARCH_PNX0105)
#elif defined(CONFIG_ARCH_PNX010X)
#include <asm/irq.h>
#include <asm/arch/gpio.h>
#define CIRRUS_DEFAULT_BASE IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000) /* = Physical address 0x48200000 */
......@@ -351,7 +351,7 @@ writeword(unsigned long base_addr, int portno, int value)
__raw_writel((u16)value, base_addr + (portno << 1));
}
#else
#if defined(CONFIG_ARCH_PNX0501)
#if defined(CONFIG_ARCH_PNX010X)
static int
readword(unsigned long base_addr, int portno)
{
......@@ -512,7 +512,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
#endif
}
#ifdef CONFIG_ARCH_PNX0105
#ifdef CONFIG_ARCH_PNX010X
initialize_ebi();
/* Map GPIO registers for the pins connected to the CS8900a. */
......@@ -780,7 +780,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
} else {
i = lp->isa_config & INT_NO_MASK;
if (lp->chip_type == CS8900) {
#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105)
#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX010X)
i = cs8900_irq_map[0];
#else
/* Translate the IRQ using the IRQ mapping table. */
......@@ -1256,7 +1256,7 @@ net_open(struct net_device *dev)
int i;
int ret;
#if !defined(CONFIG_SH_HICOSH4) && !defined(CONFIG_ARCH_PNX0105) /* uses irq#1, so this won't work */
#if !defined(CONFIG_SH_HICOSH4) && !defined(CONFIG_ARCH_PNX010X) /* uses irq#1, so this won't work */
if (dev->irq < 2) {
/* Allow interrupts to be generated by the chip */
/* Cirrus' release had this: */
......@@ -1287,7 +1287,7 @@ net_open(struct net_device *dev)
else
#endif
{
#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105)
#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX010X)
if (((1 << dev->irq) & lp->irq_map) == 0) {
printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
dev->name, dev->irq, lp->irq_map);
......@@ -1372,7 +1372,7 @@ net_open(struct net_device *dev)
case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break;
default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2);
}
#ifdef CONFIG_ARCH_PNX0105
#ifdef CONFIG_ARCH_PNX010X
result = A_CNF_10B_T;
#endif
if (!result) {
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册