提交 24025e4e 编写于 作者: M Mallikarjuna R Chilakala 提交者: Jeff Garzik

e1000: implementation of the multi-queue feature

Signed-off-by: NMallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com>
Signed-off-by: NGanesh Venkatesan <ganesh.venkatesan@intel.com>
Signed-off-by: NJohn Ronciak <john.ronciak@intel.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>
上级 581d708e
......@@ -195,6 +195,11 @@ static int e1000_resume(struct pci_dev *pdev);
static void e1000_netpoll (struct net_device *netdev);
#endif
#ifdef CONFIG_E1000_MQ
/* for multiple Rx queues */
void e1000_rx_schedule(void *data);
#endif
/* Exported from other modules */
extern void e1000_check_options(struct e1000_adapter *adapter);
......@@ -368,6 +373,9 @@ e1000_down(struct e1000_adapter *adapter)
struct net_device *netdev = adapter->netdev;
e1000_irq_disable(adapter);
#ifdef CONFIG_E1000_MQ
while (atomic_read(&adapter->rx_sched_call_data.count) != 0);
#endif
free_irq(adapter->pdev->irq, netdev);
#ifdef CONFIG_PCI_MSI
if(adapter->hw.mac_type > e1000_82547_rev_2 &&
......@@ -810,9 +818,19 @@ e1000_remove(struct pci_dev *pdev)
if(!e1000_check_phy_reset_block(&adapter->hw))
e1000_phy_hw_reset(&adapter->hw);
kfree(adapter->tx_ring);
kfree(adapter->rx_ring);
#ifdef CONFIG_E1000_NAPI
kfree(adapter->polling_netdev);
#endif
iounmap(adapter->hw.hw_addr);
pci_release_regions(pdev);
#ifdef CONFIG_E1000_MQ
free_percpu(adapter->cpu_netdev);
free_percpu(adapter->cpu_tx_ring);
#endif
free_netdev(netdev);
pci_disable_device(pdev);
......@@ -893,7 +911,21 @@ e1000_sw_init(struct e1000_adapter *adapter)
hw->master_slave = E1000_MASTER_SLAVE;
}
#ifdef CONFIG_E1000_MQ
/* Number of supported queues */
switch (hw->mac_type) {
case e1000_82571:
case e1000_82572:
adapter->num_queues = 2;
break;
default:
adapter->num_queues = 1;
break;
}
adapter->num_queues = min(adapter->num_queues, num_online_cpus());
#else
adapter->num_queues = 1;
#endif
if (e1000_alloc_queues(adapter)) {
DPRINTK(PROBE, ERR, "Unable to allocate memory for queues\n");
......@@ -909,6 +941,11 @@ e1000_sw_init(struct e1000_adapter *adapter)
set_bit(__LINK_STATE_START, &adapter->polling_netdev[i].state);
}
#endif
#ifdef CONFIG_E1000_MQ
e1000_setup_queue_mapping(adapter);
#endif
atomic_set(&adapter->irq_sem, 1);
spin_lock_init(&adapter->stats_lock);
......@@ -957,6 +994,39 @@ e1000_alloc_queues(struct e1000_adapter *adapter)
return E1000_SUCCESS;
}
#ifdef CONFIG_E1000_MQ
static void __devinit
e1000_setup_queue_mapping(struct e1000_adapter *adapter)
{
int i, cpu;
adapter->rx_sched_call_data.func = e1000_rx_schedule;
adapter->rx_sched_call_data.info = adapter->netdev;
cpus_clear(adapter->rx_sched_call_data.cpumask);
adapter->cpu_netdev = alloc_percpu(struct net_device *);
adapter->cpu_tx_ring = alloc_percpu(struct e1000_tx_ring *);
lock_cpu_hotplug();
i = 0;
for_each_online_cpu(cpu) {
*per_cpu_ptr(adapter->cpu_tx_ring, cpu) = &adapter->tx_ring[i % adapter->num_queues];
/* This is incomplete because we'd like to assign separate
* physical cpus to these netdev polling structures and
* avoid saturating a subset of cpus.
*/
if (i < adapter->num_queues) {
*per_cpu_ptr(adapter->cpu_netdev, cpu) = &adapter->polling_netdev[i];
adapter->cpu_for_queue[i] = cpu;
} else
*per_cpu_ptr(adapter->cpu_netdev, cpu) = NULL;
i++;
}
unlock_cpu_hotplug();
}
#endif
/**
* e1000_open - Called when a network interface is made active
* @netdev: network interface device structure
......@@ -1178,8 +1248,21 @@ e1000_configure_tx(struct e1000_adapter *adapter)
/* Setup the HW Tx Head and Tail descriptor pointers */
E1000_WRITE_REG(&adapter->hw, TDH, 0);
E1000_WRITE_REG(&adapter->hw, TDT, 0);
switch (adapter->num_queues) {
case 2:
tdba = adapter->tx_ring[1].dma;
tdlen = adapter->tx_ring[1].count *
sizeof(struct e1000_tx_desc);
E1000_WRITE_REG(hw, TDBAL1, (tdba & 0x00000000ffffffffULL));
E1000_WRITE_REG(hw, TDBAH1, (tdba >> 32));
E1000_WRITE_REG(hw, TDLEN1, tdlen);
E1000_WRITE_REG(hw, TDH1, 0);
E1000_WRITE_REG(hw, TDT1, 0);
adapter->tx_ring[1].tdh = E1000_TDH1;
adapter->tx_ring[1].tdt = E1000_TDT1;
/* Fall Through */
case 1:
default:
tdba = adapter->tx_ring[0].dma;
tdlen = adapter->tx_ring[0].count *
sizeof(struct e1000_tx_desc);
......@@ -1190,6 +1273,8 @@ e1000_configure_tx(struct e1000_adapter *adapter)
E1000_WRITE_REG(hw, TDT, 0);
adapter->tx_ring[0].tdh = E1000_TDH;
adapter->tx_ring[0].tdt = E1000_TDT;
break;
}
/* Set the default values for the Tx Inter Packet Gap timer */
......@@ -1222,7 +1307,7 @@ e1000_configure_tx(struct e1000_adapter *adapter)
tctl = E1000_READ_REG(hw, TCTL);
tctl &= ~E1000_TCTL_CT;
tctl |= E1000_TCTL_EN | E1000_TCTL_PSP |
tctl |= E1000_TCTL_EN | E1000_TCTL_PSP | E1000_TCTL_RTLC |
(E1000_COLLISION_THRESHOLD << E1000_CT_SHIFT);
E1000_WRITE_REG(hw, TCTL, tctl);
......@@ -1518,6 +1603,21 @@ e1000_configure_rx(struct e1000_adapter *adapter)
/* Setup the HW Rx Head and Tail Descriptor Pointers and
* the Base and Length of the Rx Descriptor Ring */
switch (adapter->num_queues) {
#ifdef CONFIG_E1000_MQ
case 2:
rdba = adapter->rx_ring[1].dma;
E1000_WRITE_REG(hw, RDBAL1, (rdba & 0x00000000ffffffffULL));
E1000_WRITE_REG(hw, RDBAH1, (rdba >> 32));
E1000_WRITE_REG(hw, RDLEN1, rdlen);
E1000_WRITE_REG(hw, RDH1, 0);
E1000_WRITE_REG(hw, RDT1, 0);
adapter->rx_ring[1].rdh = E1000_RDH1;
adapter->rx_ring[1].rdt = E1000_RDT1;
/* Fall Through */
#endif
case 1:
default:
rdba = adapter->rx_ring[0].dma;
E1000_WRITE_REG(hw, RDBAL, (rdba & 0x00000000ffffffffULL));
E1000_WRITE_REG(hw, RDBAH, (rdba >> 32));
......@@ -1527,6 +1627,47 @@ e1000_configure_rx(struct e1000_adapter *adapter)
adapter->rx_ring[0].rdh = E1000_RDH;
adapter->rx_ring[0].rdt = E1000_RDT;
break;
}
#ifdef CONFIG_E1000_MQ
if (adapter->num_queues > 1) {
uint32_t random[10];
get_random_bytes(&random[0], 40);
if (hw->mac_type <= e1000_82572) {
E1000_WRITE_REG(hw, RSSIR, 0);
E1000_WRITE_REG(hw, RSSIM, 0);
}
switch (adapter->num_queues) {
case 2:
default:
reta = 0x00800080;
mrqc = E1000_MRQC_ENABLE_RSS_2Q;
break;
}
/* Fill out redirection table */
for (i = 0; i < 32; i++)
E1000_WRITE_REG_ARRAY(hw, RETA, i, reta);
/* Fill out hash function seeds */
for (i = 0; i < 10; i++)
E1000_WRITE_REG_ARRAY(hw, RSSRK, i, random[i]);
mrqc |= (E1000_MRQC_RSS_FIELD_IPV4 |
E1000_MRQC_RSS_FIELD_IPV4_TCP);
E1000_WRITE_REG(hw, MRQC, mrqc);
}
/* Multiqueue and packet checksumming are mutually exclusive. */
if (hw->mac_type >= e1000_82571) {
rxcsum = E1000_READ_REG(hw, RXCSUM);
rxcsum |= E1000_RXCSUM_PCSD;
E1000_WRITE_REG(hw, RXCSUM, rxcsum);
}
#else
/* Enable 82543 Receive Checksum Offload for TCP and UDP */
if (hw->mac_type >= e1000_82543) {
......@@ -1546,6 +1687,7 @@ e1000_configure_rx(struct e1000_adapter *adapter)
}
E1000_WRITE_REG(hw, RXCSUM, rxcsum);
}
#endif /* CONFIG_E1000_MQ */
if (hw->mac_type == e1000_82573)
E1000_WRITE_REG(hw, ERT, 0x0100);
......@@ -2488,7 +2630,12 @@ e1000_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
unsigned int f;
len -= skb->data_len;
#ifdef CONFIG_E1000_MQ
tx_ring = *per_cpu_ptr(adapter->cpu_tx_ring, smp_processor_id());
#else
tx_ring = adapter->tx_ring;
#endif
if (unlikely(skb->len <= 0)) {
dev_kfree_skb_any(skb);
return NETDEV_TX_OK;
......@@ -2879,6 +3026,29 @@ e1000_update_stats(struct e1000_adapter *adapter)
spin_unlock_irqrestore(&adapter->stats_lock, flags);
}
#ifdef CONFIG_E1000_MQ
void
e1000_rx_schedule(void *data)
{
struct net_device *poll_dev, *netdev = data;
struct e1000_adapter *adapter = netdev->priv;
int this_cpu = get_cpu();
poll_dev = *per_cpu_ptr(adapter->cpu_netdev, this_cpu);
if (poll_dev == NULL) {
put_cpu();
return;
}
if (likely(netif_rx_schedule_prep(poll_dev)))
__netif_rx_schedule(poll_dev);
else
e1000_irq_enable(adapter);
put_cpu();
}
#endif
/**
* e1000_intr - Interrupt Handler
* @irq: interrupt number
......@@ -2907,12 +3077,27 @@ e1000_intr(int irq, void *data, struct pt_regs *regs)
atomic_inc(&adapter->irq_sem);
E1000_WRITE_REG(hw, IMC, ~0);
E1000_WRITE_FLUSH(hw);
#ifdef CONFIG_E1000_MQ
if (atomic_read(&adapter->rx_sched_call_data.count) == 0) {
cpu_set(adapter->cpu_for_queue[0],
adapter->rx_sched_call_data.cpumask);
for (i = 1; i < adapter->num_queues; i++) {
cpu_set(adapter->cpu_for_queue[i],
adapter->rx_sched_call_data.cpumask);
atomic_inc(&adapter->irq_sem);
}
atomic_set(&adapter->rx_sched_call_data.count, i);
smp_call_async_mask(&adapter->rx_sched_call_data);
} else {
printk("call_data.count == %u\n", atomic_read(&adapter->rx_sched_call_data.count));
}
#else
if (likely(netif_rx_schedule_prep(&adapter->polling_netdev[0])))
__netif_rx_schedule(&adapter->polling_netdev[0]);
else
e1000_irq_enable(adapter);
#endif
#else
/* Writing IMC and IMS is needed for 82547.
Due to Hub Link bus being occupied, an interrupt
de-assertion message is not able to be sent.
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册