提交 238ccbb0 编写于 作者: L Linus Torvalds

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (22 commits)
  Input: ALPS - add interleaved protocol support (Dell E6x00 series)
  Input: keyboard - don't override beep with a bell
  Input: altera_ps2 - fix test of unsigned in altera_ps2_probe()
  Input: add mc13783 touchscreen driver
  Input: ep93xx_keypad - update driver to new core support
  Input: wacom - separate pen from express keys on Graphire
  Input: wacom - add defines for data packet report IDs
  Input: wacom - add support for new LCD tablets
  Input: wacom - add defines for packet lengths of various devices
  Input: wacom - ensure the device is initialized properly upon resume
  Input: at32psif - do not sleep in atomic context
  Input: i8042 - add Gigabyte M1022M to the noloop list
  Input: i8042 - allow installing platform filters for incoming data
  Input: i8042 - fix locking in interrupt routine
  Input: ALPS - do not set REL_X/REL_Y capabilities on the touchpad
  Input: document use of input_event() function
  Input: sa1111ps2 - annotate probe() and remove() methods
  Input: ambakmi - annotate probe() and remove() methods
  Input: gscps2 - fix probe() and remove() annotations
  Input: altera_ps2 - add annotations to probe and remove methods
  ...
......@@ -5,9 +5,6 @@
#ifndef __ASM_ARCH_EP93XX_KEYPAD_H
#define __ASM_ARCH_EP93XX_KEYPAD_H
#define MAX_MATRIX_KEY_ROWS (8)
#define MAX_MATRIX_KEY_COLS (8)
/* flags for the ep93xx_keypad driver */
#define EP93XX_KEYPAD_DISABLE_3_KEY (1<<0) /* disable 3-key reset */
#define EP93XX_KEYPAD_DIAG_MODE (1<<1) /* diagnostic mode */
......@@ -18,8 +15,6 @@
/**
* struct ep93xx_keypad_platform_data - platform specific device structure
* @matrix_key_rows: number of rows in the keypad matrix
* @matrix_key_cols: number of columns in the keypad matrix
* @matrix_key_map: array of keycodes defining the keypad matrix
* @matrix_key_map_size: ARRAY_SIZE(matrix_key_map)
* @debounce: debounce start count; terminal count is 0xff
......@@ -27,8 +22,6 @@
* @flags: see above
*/
struct ep93xx_keypad_platform_data {
unsigned int matrix_key_rows;
unsigned int matrix_key_cols;
unsigned int *matrix_key_map;
int matrix_key_map_size;
unsigned int debounce;
......@@ -36,7 +29,7 @@ struct ep93xx_keypad_platform_data {
unsigned int flags;
};
/* macro for creating the matrix_key_map table */
#define KEY(row, col, val) (((row) << 28) | ((col) << 24) | (val))
#define EP93XX_MATRIX_ROWS (8)
#define EP93XX_MATRIX_COLS (8)
#endif /* __ASM_ARCH_EP93XX_KEYPAD_H */
......@@ -233,7 +233,8 @@ int setkeycode(unsigned int scancode, unsigned int keycode)
}
/*
* Making beeps and bells.
* Making beeps and bells. Note that we prefer beeps to bells, but when
* shutting the sound off we do both.
*/
static int kd_sound_helper(struct input_handle *handle, void *data)
......@@ -242,9 +243,12 @@ static int kd_sound_helper(struct input_handle *handle, void *data)
struct input_dev *dev = handle->dev;
if (test_bit(EV_SND, dev->evbit)) {
if (test_bit(SND_TONE, dev->sndbit))
if (test_bit(SND_TONE, dev->sndbit)) {
input_inject_event(handle, EV_SND, SND_TONE, *hz);
if (test_bit(SND_BELL, handle->dev->sndbit))
if (*hz)
return 0;
}
if (test_bit(SND_BELL, dev->sndbit))
input_inject_event(handle, EV_SND, SND_BELL, *hz ? 1 : 0);
}
......
......@@ -296,9 +296,15 @@ static void input_handle_event(struct input_dev *dev,
* @value: value of the event
*
* This function should be used by drivers implementing various input
* devices. See also input_inject_event().
* devices to report input events. See also input_inject_event().
*
* NOTE: input_event() may be safely used right after input device was
* allocated with input_allocate_device(), even before it is registered
* with input_register_device(), but the event will not reach any of the
* input handlers. Such early invocation of input_event() may be used
* to 'seed' initial state of a switch or initial position of absolute
* axis, etc.
*/
void input_event(struct input_dev *dev,
unsigned int type, unsigned int code, int value)
{
......
......@@ -22,11 +22,11 @@
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/input.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/input/matrix_keypad.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
#include <mach/ep93xx_keypad.h>
/*
......@@ -60,38 +60,37 @@
#define KEY_REG_KEY1_MASK (0x0000003f)
#define KEY_REG_KEY1_SHIFT (0)
#define keypad_readl(off) __raw_readl(keypad->mmio_base + (off))
#define keypad_writel(v, off) __raw_writel((v), keypad->mmio_base + (off))
#define MAX_MATRIX_KEY_NUM (MAX_MATRIX_KEY_ROWS * MAX_MATRIX_KEY_COLS)
#define EP93XX_MATRIX_SIZE (EP93XX_MATRIX_ROWS * EP93XX_MATRIX_COLS)
struct ep93xx_keypad {
struct ep93xx_keypad_platform_data *pdata;
struct clk *clk;
struct input_dev *input_dev;
struct clk *clk;
void __iomem *mmio_base;
int irq;
int enabled;
unsigned int matrix_keycodes[EP93XX_MATRIX_SIZE];
int key1;
int key2;
unsigned int matrix_keycodes[MAX_MATRIX_KEY_NUM];
int irq;
bool enabled;
};
static void ep93xx_keypad_build_keycode(struct ep93xx_keypad *keypad)
{
struct ep93xx_keypad_platform_data *pdata = keypad->pdata;
struct input_dev *input_dev = keypad->input_dev;
unsigned int *key;
int i;
for (i = 0; i < pdata->matrix_key_map_size; i++) {
unsigned int key = pdata->matrix_key_map[i];
int row = (key >> 28) & 0xf;
int col = (key >> 24) & 0xf;
int code = key & 0xffffff;
key = &pdata->matrix_key_map[0];
for (i = 0; i < pdata->matrix_key_map_size; i++, key++) {
int row = KEY_ROW(*key);
int col = KEY_COL(*key);
int code = KEY_VAL(*key);
keypad->matrix_keycodes[(row << 3) + col] = code;
__set_bit(code, input_dev->keybit);
......@@ -102,9 +101,11 @@ static irqreturn_t ep93xx_keypad_irq_handler(int irq, void *dev_id)
{
struct ep93xx_keypad *keypad = dev_id;
struct input_dev *input_dev = keypad->input_dev;
unsigned int status = keypad_readl(KEY_REG);
unsigned int status;
int keycode, key1, key2;
status = __raw_readl(keypad->mmio_base + KEY_REG);
keycode = (status & KEY_REG_KEY1_MASK) >> KEY_REG_KEY1_SHIFT;
key1 = keypad->matrix_keycodes[keycode];
......@@ -152,7 +153,10 @@ static void ep93xx_keypad_config(struct ep93xx_keypad *keypad)
struct ep93xx_keypad_platform_data *pdata = keypad->pdata;
unsigned int val = 0;
clk_set_rate(keypad->clk, pdata->flags & EP93XX_KEYPAD_KDIV);
if (pdata->flags & EP93XX_KEYPAD_KDIV)
clk_set_rate(keypad->clk, EP93XX_KEYTCHCLK_DIV4);
else
clk_set_rate(keypad->clk, EP93XX_KEYTCHCLK_DIV16);
if (pdata->flags & EP93XX_KEYPAD_DISABLE_3_KEY)
val |= KEY_INIT_DIS3KY;
......@@ -167,7 +171,7 @@ static void ep93xx_keypad_config(struct ep93xx_keypad *keypad)
val |= ((pdata->prescale << KEY_INIT_PRSCL_SHIFT) & KEY_INIT_PRSCL_MASK);
keypad_writel(val, KEY_INIT);
__raw_writel(val, keypad->mmio_base + KEY_INIT);
}
static int ep93xx_keypad_open(struct input_dev *pdev)
......@@ -177,7 +181,7 @@ static int ep93xx_keypad_open(struct input_dev *pdev)
if (!keypad->enabled) {
ep93xx_keypad_config(keypad);
clk_enable(keypad->clk);
keypad->enabled = 1;
keypad->enabled = true;
}
return 0;
......@@ -189,7 +193,7 @@ static void ep93xx_keypad_close(struct input_dev *pdev)
if (keypad->enabled) {
clk_disable(keypad->clk);
keypad->enabled = 0;
keypad->enabled = false;
}
}
......@@ -211,7 +215,7 @@ static int ep93xx_keypad_suspend(struct platform_device *pdev,
if (keypad->enabled) {
clk_disable(keypad->clk);
keypad->enabled = 0;
keypad->enabled = false;
}
mutex_unlock(&input_dev->mutex);
......@@ -236,7 +240,7 @@ static int ep93xx_keypad_resume(struct platform_device *pdev)
if (!keypad->enabled) {
ep93xx_keypad_config(keypad);
clk_enable(keypad->clk);
keypad->enabled = 1;
keypad->enabled = true;
}
}
......@@ -252,88 +256,56 @@ static int ep93xx_keypad_resume(struct platform_device *pdev)
static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
{
struct ep93xx_keypad *keypad;
struct ep93xx_keypad_platform_data *pdata = pdev->dev.platform_data;
struct input_dev *input_dev;
struct resource *res;
int irq, err, i, gpio;
if (!pdata ||
!pdata->matrix_key_rows ||
pdata->matrix_key_rows > MAX_MATRIX_KEY_ROWS ||
!pdata->matrix_key_cols ||
pdata->matrix_key_cols > MAX_MATRIX_KEY_COLS) {
dev_err(&pdev->dev, "invalid or missing platform data\n");
return -EINVAL;
}
int err;
keypad = kzalloc(sizeof(struct ep93xx_keypad), GFP_KERNEL);
if (!keypad) {
dev_err(&pdev->dev, "failed to allocate driver data\n");
if (!keypad)
return -ENOMEM;
}
keypad->pdata = pdata;
keypad->pdata = pdev->dev.platform_data;
if (!keypad->pdata) {
err = -EINVAL;
goto failed_free;
}
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
dev_err(&pdev->dev, "failed to get keypad irq\n");
keypad->irq = platform_get_irq(pdev, 0);
if (!keypad->irq) {
err = -ENXIO;
goto failed_free;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
dev_err(&pdev->dev, "failed to get I/O memory\n");
err = -ENXIO;
goto failed_free;
}
res = request_mem_region(res->start, resource_size(res), pdev->name);
if (!res) {
dev_err(&pdev->dev, "failed to request I/O memory\n");
err = -EBUSY;
goto failed_free;
}
keypad->mmio_base = ioremap(res->start, resource_size(res));
if (keypad->mmio_base == NULL) {
dev_err(&pdev->dev, "failed to remap I/O memory\n");
err = -ENXIO;
goto failed_free_mem;
}
/* Request the needed GPIO's */
gpio = EP93XX_GPIO_LINE_ROW0;
for (i = 0; i < keypad->pdata->matrix_key_rows; i++, gpio++) {
err = gpio_request(gpio, pdev->name);
if (err) {
dev_err(&pdev->dev, "failed to request gpio-%d\n",
gpio);
goto failed_free_rows;
}
}
gpio = EP93XX_GPIO_LINE_COL0;
for (i = 0; i < keypad->pdata->matrix_key_cols; i++, gpio++) {
err = gpio_request(gpio, pdev->name);
if (err) {
dev_err(&pdev->dev, "failed to request gpio-%d\n",
gpio);
goto failed_free_cols;
}
}
err = ep93xx_keypad_acquire_gpio(pdev);
if (err)
goto failed_free_io;
keypad->clk = clk_get(&pdev->dev, "key_clk");
keypad->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(keypad->clk)) {
dev_err(&pdev->dev, "failed to get keypad clock\n");
err = PTR_ERR(keypad->clk);
goto failed_free_io;
goto failed_free_gpio;
}
/* Create and register the input driver */
input_dev = input_allocate_device();
if (!input_dev) {
dev_err(&pdev->dev, "failed to allocate input device\n");
err = -ENOMEM;
goto failed_put_clk;
}
......@@ -358,44 +330,29 @@ static int __devinit ep93xx_keypad_probe(struct platform_device *pdev)
ep93xx_keypad_build_keycode(keypad);
platform_set_drvdata(pdev, keypad);
err = request_irq(irq, ep93xx_keypad_irq_handler, IRQF_DISABLED,
pdev->name, keypad);
if (err) {
dev_err(&pdev->dev, "failed to request IRQ\n");
err = request_irq(keypad->irq, ep93xx_keypad_irq_handler,
IRQF_DISABLED, pdev->name, keypad);
if (err)
goto failed_free_dev;
}
keypad->irq = irq;
/* Register the input device */
err = input_register_device(input_dev);
if (err) {
dev_err(&pdev->dev, "failed to register input device\n");
if (err)
goto failed_free_irq;
}
device_init_wakeup(&pdev->dev, 1);
return 0;
failed_free_irq:
free_irq(irq, pdev);
free_irq(keypad->irq, pdev);
platform_set_drvdata(pdev, NULL);
failed_free_dev:
input_free_device(input_dev);
failed_put_clk:
clk_put(keypad->clk);
failed_free_gpio:
ep93xx_keypad_release_gpio(pdev);
failed_free_io:
i = keypad->pdata->matrix_key_cols - 1;
gpio = EP93XX_GPIO_LINE_COL0 + i;
failed_free_cols:
for ( ; i >= 0; i--, gpio--)
gpio_free(gpio);
i = keypad->pdata->matrix_key_rows - 1;
gpio = EP93XX_GPIO_LINE_ROW0 + i;
failed_free_rows:
for ( ; i >= 0; i--, gpio--)
gpio_free(gpio);
iounmap(keypad->mmio_base);
failed_free_mem:
release_mem_region(res->start, resource_size(res));
......@@ -408,7 +365,6 @@ static int __devexit ep93xx_keypad_remove(struct platform_device *pdev)
{
struct ep93xx_keypad *keypad = platform_get_drvdata(pdev);
struct resource *res;
int i, gpio;
free_irq(keypad->irq, pdev);
......@@ -420,15 +376,7 @@ static int __devexit ep93xx_keypad_remove(struct platform_device *pdev)
input_unregister_device(keypad->input_dev);
i = keypad->pdata->matrix_key_cols - 1;
gpio = EP93XX_GPIO_LINE_COL0 + i;
for ( ; i >= 0; i--, gpio--)
gpio_free(gpio);
i = keypad->pdata->matrix_key_rows - 1;
gpio = EP93XX_GPIO_LINE_ROW0 + i;
for ( ; i >= 0; i--, gpio--)
gpio_free(gpio);
ep93xx_keypad_release_gpio(pdev);
iounmap(keypad->mmio_base);
......
......@@ -5,6 +5,7 @@
* Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
* Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
* Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
* Copyright (c) 2009 Sebastian Kapfer <sebastian_kapfer@gmx.net>
*
* ALPS detection, tap switching and status querying info is taken from
* tpconfig utility (by C. Scott Ananian and Bruce Kall).
......@@ -28,7 +29,6 @@
#define dbg(format, arg...) do {} while (0)
#endif
#define ALPS_OLDPROTO 0x01 /* old style input */
#define ALPS_DUALPOINT 0x02 /* touchpad has trackstick */
#define ALPS_PASS 0x04 /* device has a pass-through port */
......@@ -37,7 +37,8 @@
#define ALPS_FW_BK_1 0x10 /* front & back buttons present */
#define ALPS_FW_BK_2 0x20 /* front & back buttons present */
#define ALPS_FOUR_BUTTONS 0x40 /* 4 direction button present */
#define ALPS_PS2_INTERLEAVED 0x80 /* 3-byte PS/2 packet interleaved with
6-byte ALPS packet */
static const struct alps_model_info alps_model_data[] = {
{ { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
......@@ -58,7 +59,9 @@ static const struct alps_model_info alps_model_data[] = {
{ { 0x20, 0x02, 0x0e }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */
{ { 0x22, 0x02, 0x0a }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
{ { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude E6500 */
/* Dell Latitude E5500, E6400, E6500, Precision M4400 */
{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS }, /* Dell Vostro 1400 */
};
......@@ -69,20 +72,88 @@ static const struct alps_model_info alps_model_data[] = {
*/
/*
* ALPS abolute Mode - new format
* PS/2 packet format
*
* byte 0: 0 0 YSGN XSGN 1 M R L
* byte 1: X7 X6 X5 X4 X3 X2 X1 X0
* byte 2: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
*
* Note that the device never signals overflow condition.
*
* ALPS absolute Mode - new format
*
* byte 0: 1 ? ? ? 1 ? ? ?
* byte 1: 0 x6 x5 x4 x3 x2 x1 x0
* byte 2: 0 x10 x9 x8 x7 ? fin ges
* byte 2: 0 x10 x9 x8 x7 ? fin ges
* byte 3: 0 y9 y8 y7 1 M R L
* byte 4: 0 y6 y5 y4 y3 y2 y1 y0
* byte 5: 0 z6 z5 z4 z3 z2 z1 z0
*
* Dualpoint device -- interleaved packet format
*
* byte 0: 1 1 0 0 1 1 1 1
* byte 1: 0 x6 x5 x4 x3 x2 x1 x0
* byte 2: 0 x10 x9 x8 x7 0 fin ges
* byte 3: 0 0 YSGN XSGN 1 1 1 1
* byte 4: X7 X6 X5 X4 X3 X2 X1 X0
* byte 5: Y7 Y6 Y5 Y4 Y3 Y2 Y1 Y0
* byte 6: 0 y9 y8 y7 1 m r l
* byte 7: 0 y6 y5 y4 y3 y2 y1 y0
* byte 8: 0 z6 z5 z4 z3 z2 z1 z0
*
* CAPITALS = stick, miniscules = touchpad
*
* ?'s can have different meanings on different models,
* such as wheel rotation, extra buttons, stick buttons
* on a dualpoint, etc.
*/
static bool alps_is_valid_first_byte(const struct alps_model_info *model,
unsigned char data)
{
return (data & model->mask0) == model->byte0;
}
static void alps_report_buttons(struct psmouse *psmouse,
struct input_dev *dev1, struct input_dev *dev2,
int left, int right, int middle)
{
struct alps_data *priv = psmouse->private;
const struct alps_model_info *model = priv->i;
if (model->flags & ALPS_PS2_INTERLEAVED) {
struct input_dev *dev;
/*
* If shared button has already been reported on the
* other device (dev2) then this event should be also
* sent through that device.
*/
dev = test_bit(BTN_LEFT, dev2->key) ? dev2 : dev1;
input_report_key(dev, BTN_LEFT, left);
dev = test_bit(BTN_RIGHT, dev2->key) ? dev2 : dev1;
input_report_key(dev, BTN_RIGHT, right);
dev = test_bit(BTN_MIDDLE, dev2->key) ? dev2 : dev1;
input_report_key(dev, BTN_MIDDLE, middle);
/*
* Sync the _other_ device now, we'll do the first
* device later once we report the rest of the events.
*/
input_sync(dev2);
} else {
/*
* For devices with non-interleaved packets we know what
* device buttons belong to so we can simply report them.
*/
input_report_key(dev1, BTN_LEFT, left);
input_report_key(dev1, BTN_RIGHT, right);
input_report_key(dev1, BTN_MIDDLE, middle);
}
}
static void alps_process_packet(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
......@@ -93,18 +164,6 @@ static void alps_process_packet(struct psmouse *psmouse)
int x, y, z, ges, fin, left, right, middle;
int back = 0, forward = 0;
if ((packet[0] & 0xc8) == 0x08) { /* 3-byte PS/2 packet */
input_report_key(dev2, BTN_LEFT, packet[0] & 1);
input_report_key(dev2, BTN_RIGHT, packet[0] & 2);
input_report_key(dev2, BTN_MIDDLE, packet[0] & 4);
input_report_rel(dev2, REL_X,
packet[1] ? packet[1] - ((packet[0] << 4) & 0x100) : 0);
input_report_rel(dev2, REL_Y,
packet[2] ? ((packet[0] << 3) & 0x100) - packet[2] : 0);
input_sync(dev2);
return;
}
if (model->flags & ALPS_OLDPROTO) {
left = packet[2] & 0x10;
right = packet[2] & 0x08;
......@@ -140,18 +199,13 @@ static void alps_process_packet(struct psmouse *psmouse)
input_report_rel(dev2, REL_X, (x > 383 ? (x - 768) : x));
input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y));
input_report_key(dev2, BTN_LEFT, left);
input_report_key(dev2, BTN_RIGHT, right);
input_report_key(dev2, BTN_MIDDLE, middle);
alps_report_buttons(psmouse, dev2, dev, left, right, middle);
input_sync(dev);
input_sync(dev2);
return;
}
input_report_key(dev, BTN_LEFT, left);
input_report_key(dev, BTN_RIGHT, right);
input_report_key(dev, BTN_MIDDLE, middle);
alps_report_buttons(psmouse, dev, dev2, left, right, middle);
/* Convert hardware tap to a reasonable Z value */
if (ges && !fin)
......@@ -202,25 +256,168 @@ static void alps_process_packet(struct psmouse *psmouse)
input_sync(dev);
}
static void alps_report_bare_ps2_packet(struct psmouse *psmouse,
unsigned char packet[],
bool report_buttons)
{
struct alps_data *priv = psmouse->private;
struct input_dev *dev2 = priv->dev2;
if (report_buttons)
alps_report_buttons(psmouse, dev2, psmouse->dev,
packet[0] & 1, packet[0] & 2, packet[0] & 4);
input_report_rel(dev2, REL_X,
packet[1] ? packet[1] - ((packet[0] << 4) & 0x100) : 0);
input_report_rel(dev2, REL_Y,
packet[2] ? ((packet[0] << 3) & 0x100) - packet[2] : 0);
input_sync(dev2);
}
static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
if (psmouse->pktcnt < 6)
return PSMOUSE_GOOD_DATA;
if (psmouse->pktcnt == 6) {
/*
* Start a timer to flush the packet if it ends up last
* 6-byte packet in the stream. Timer needs to fire
* psmouse core times out itself. 20 ms should be enough
* to decide if we are getting more data or not.
*/
mod_timer(&priv->timer, jiffies + msecs_to_jiffies(20));
return PSMOUSE_GOOD_DATA;
}
del_timer(&priv->timer);
if (psmouse->packet[6] & 0x80) {
/*
* Highest bit is set - that means we either had
* complete ALPS packet and this is start of the
* next packet or we got garbage.
*/
if (((psmouse->packet[3] |
psmouse->packet[4] |
psmouse->packet[5]) & 0x80) ||
(!alps_is_valid_first_byte(priv->i, psmouse->packet[6]))) {
dbg("refusing packet %x %x %x %x "
"(suspected interleaved ps/2)\n",
psmouse->packet[3], psmouse->packet[4],
psmouse->packet[5], psmouse->packet[6]);
return PSMOUSE_BAD_DATA;
}
alps_process_packet(psmouse);
/* Continue with the next packet */
psmouse->packet[0] = psmouse->packet[6];
psmouse->pktcnt = 1;
} else {
/*
* High bit is 0 - that means that we indeed got a PS/2
* packet in the middle of ALPS packet.
*
* There is also possibility that we got 6-byte ALPS
* packet followed by 3-byte packet from trackpoint. We
* can not distinguish between these 2 scenarios but
* becase the latter is unlikely to happen in course of
* normal operation (user would need to press all
* buttons on the pad and start moving trackpoint
* without touching the pad surface) we assume former.
* Even if we are wrong the wost thing that would happen
* the cursor would jump but we should not get protocol
* desynchronization.
*/
alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3],
false);
/*
* Continue with the standard ALPS protocol handling,
* but make sure we won't process it as an interleaved
* packet again, which may happen if all buttons are
* pressed. To avoid this let's reset the 4th bit which
* is normally 1.
*/
psmouse->packet[3] = psmouse->packet[6] & 0xf7;
psmouse->pktcnt = 4;
}
return PSMOUSE_GOOD_DATA;
}
static void alps_flush_packet(unsigned long data)
{
struct psmouse *psmouse = (struct psmouse *)data;
serio_pause_rx(psmouse->ps2dev.serio);
if (psmouse->pktcnt == 6) {
/*
* We did not any more data in reasonable amount of time.
* Validate the last 3 bytes and process as a standard
* ALPS packet.
*/
if ((psmouse->packet[3] |
psmouse->packet[4] |
psmouse->packet[5]) & 0x80) {
dbg("refusing packet %x %x %x "
"(suspected interleaved ps/2)\n",
psmouse->packet[3], psmouse->packet[4],
psmouse->packet[5]);
} else {
alps_process_packet(psmouse);
}
psmouse->pktcnt = 0;
}
serio_continue_rx(psmouse->ps2dev.serio);
}
static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
{
struct alps_data *priv = psmouse->private;
const struct alps_model_info *model = priv->i;
if ((psmouse->packet[0] & 0xc8) == 0x08) { /* PS/2 packet */
if (psmouse->pktcnt == 3) {
alps_process_packet(psmouse);
alps_report_bare_ps2_packet(psmouse, psmouse->packet,
true);
return PSMOUSE_FULL_PACKET;
}
return PSMOUSE_GOOD_DATA;
}
if ((psmouse->packet[0] & priv->i->mask0) != priv->i->byte0)
/* Check for PS/2 packet stuffed in the middle of ALPS packet. */
if ((model->flags & ALPS_PS2_INTERLEAVED) &&
psmouse->pktcnt >= 4 && (psmouse->packet[3] & 0x0f) == 0x0f) {
return alps_handle_interleaved_ps2(psmouse);
}
if (!alps_is_valid_first_byte(model, psmouse->packet[0])) {
dbg("refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n",
psmouse->packet[0], model->mask0, model->byte0);
return PSMOUSE_BAD_DATA;
}
/* Bytes 2 - 6 should have 0 in the highest bit */
if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 &&
(psmouse->packet[psmouse->pktcnt - 1] & 0x80))
(psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
dbg("refusing packet[%i] = %x\n",
psmouse->pktcnt - 1, psmouse->packet[psmouse->pktcnt - 1]);
return PSMOUSE_BAD_DATA;
}
if (psmouse->pktcnt == 6) {
alps_process_packet(psmouse);
......@@ -459,6 +656,7 @@ static void alps_disconnect(struct psmouse *psmouse)
struct alps_data *priv = psmouse->private;
psmouse_reset(psmouse);
del_timer_sync(&priv->timer);
input_unregister_device(priv->dev2);
kfree(priv);
}
......@@ -476,6 +674,8 @@ int alps_init(struct psmouse *psmouse)
goto init_fail;
priv->dev2 = dev2;
setup_timer(&priv->timer, alps_flush_packet, (unsigned long)psmouse);
psmouse->private = priv;
model = alps_get_model(psmouse, &version);
......@@ -487,6 +687,17 @@ int alps_init(struct psmouse *psmouse)
if (alps_hw_init(psmouse))
goto init_fail;
/*
* Undo part of setup done for us by psmouse core since touchpad
* is not a relative device.
*/
__clear_bit(EV_REL, dev1->evbit);
__clear_bit(REL_X, dev1->relbit);
__clear_bit(REL_Y, dev1->relbit);
/*
* Now set up our capabilities.
*/
dev1->evbit[BIT_WORD(EV_KEY)] |= BIT_MASK(EV_KEY);
dev1->keybit[BIT_WORD(BTN_TOUCH)] |= BIT_MASK(BTN_TOUCH);
dev1->keybit[BIT_WORD(BTN_TOOL_FINGER)] |= BIT_MASK(BTN_TOOL_FINGER);
......
......@@ -23,6 +23,7 @@ struct alps_data {
char phys[32]; /* Phys */
const struct alps_model_info *i;/* Info */
int prev_fin; /* Finger bit from previous packet */
struct timer_list timer;
};
#ifdef CONFIG_MOUSE_PS2_ALPS
......
......@@ -79,11 +79,11 @@ static void altera_ps2_close(struct serio *io)
/*
* Add one device to this driver.
*/
static int altera_ps2_probe(struct platform_device *pdev)
static int __devinit altera_ps2_probe(struct platform_device *pdev)
{
struct ps2if *ps2if;
struct serio *serio;
int error;
int error, irq;
ps2if = kzalloc(sizeof(struct ps2if), GFP_KERNEL);
serio = kzalloc(sizeof(struct serio), GFP_KERNEL);
......@@ -108,11 +108,13 @@ static int altera_ps2_probe(struct platform_device *pdev)
goto err_free_mem;
}
ps2if->irq = platform_get_irq(pdev, 0);
if (ps2if->irq < 0) {
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
error = -ENXIO;
goto err_free_mem;
}
ps2if->irq = irq;
if (!request_mem_region(ps2if->iomem_res->start,
resource_size(ps2if->iomem_res), pdev->name)) {
......@@ -155,7 +157,7 @@ static int altera_ps2_probe(struct platform_device *pdev)
/*
* Remove one device from this driver.
*/
static int altera_ps2_remove(struct platform_device *pdev)
static int __devexit altera_ps2_remove(struct platform_device *pdev)
{
struct ps2if *ps2if = platform_get_drvdata(pdev);
......@@ -175,9 +177,10 @@ static int altera_ps2_remove(struct platform_device *pdev)
*/
static struct platform_driver altera_ps2_driver = {
.probe = altera_ps2_probe,
.remove = altera_ps2_remove,
.remove = __devexit_p(altera_ps2_remove),
.driver = {
.name = DRV_NAME,
.owner = THIS_MODULE,
},
};
......
......@@ -107,7 +107,7 @@ static void amba_kmi_close(struct serio *io)
clk_disable(kmi->clk);
}
static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id)
static int __devinit amba_kmi_probe(struct amba_device *dev, struct amba_id *id)
{
struct amba_kmi_port *kmi;
struct serio *io;
......@@ -134,7 +134,7 @@ static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id)
io->port_data = kmi;
io->dev.parent = &dev->dev;
kmi->io = io;
kmi->io = io;
kmi->base = ioremap(dev->res.start, resource_size(&dev->res));
if (!kmi->base) {
ret = -ENOMEM;
......@@ -162,7 +162,7 @@ static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id)
return ret;
}
static int amba_kmi_remove(struct amba_device *dev)
static int __devexit amba_kmi_remove(struct amba_device *dev)
{
struct amba_kmi_port *kmi = amba_get_drvdata(dev);
......@@ -197,10 +197,11 @@ static struct amba_id amba_kmi_idtable[] = {
static struct amba_driver ambakmi_driver = {
.drv = {
.name = "kmi-pl050",
.owner = THIS_MODULE,
},
.id_table = amba_kmi_idtable,
.probe = amba_kmi_probe,
.remove = amba_kmi_remove,
.remove = __devexit_p(amba_kmi_remove),
.resume = amba_kmi_resume,
};
......
......@@ -137,7 +137,7 @@ static int psif_write(struct serio *io, unsigned char val)
spin_lock_irqsave(&psif->lock, flags);
while (!(psif_readl(psif, SR) & PSIF_BIT(TXEMPTY)) && timeout--)
msleep(10);
udelay(50);
if (timeout >= 0) {
psif_writel(psif, THR, val);
......@@ -352,6 +352,7 @@ static struct platform_driver psif_driver = {
.remove = __exit_p(psif_remove),
.driver = {
.name = "atmel_psif",
.owner = THIS_MODULE,
},
.suspend = psif_suspend,
.resume = psif_resume,
......
......@@ -6,7 +6,7 @@
* Copyright (c) 2002 Thibaut Varene <varenet@parisc-linux.org>
*
* Pieces of code based on linux-2.4's hp_mouse.c & hp_keyb.c
* Copyright (c) 1999 Alex deVries <alex@onefishtwo.ca>
* Copyright (c) 1999 Alex deVries <alex@onefishtwo.ca>
* Copyright (c) 1999-2000 Philipp Rumpf <prumpf@tux.org>
* Copyright (c) 2000 Xavier Debacker <debackex@esiee.fr>
* Copyright (c) 2000-2001 Thomas Marteau <marteaut@esiee.fr>
......@@ -326,7 +326,7 @@ static void gscps2_close(struct serio *port)
* @return: success/error report
*/
static int __init gscps2_probe(struct parisc_device *dev)
static int __devinit gscps2_probe(struct parisc_device *dev)
{
struct gscps2port *ps2port;
struct serio *serio;
......@@ -443,7 +443,7 @@ static struct parisc_driver parisc_ps2_driver = {
.name = "gsc_ps2",
.id_table = gscps2_device_tbl,
.probe = gscps2_probe,
.remove = gscps2_remove,
.remove = __devexit_p(gscps2_remove),
};
static int __init gscps2_init(void)
......
......@@ -993,10 +993,8 @@ int hil_mlc_unregister(hil_mlc *mlc)
static int __init hil_mlc_init(void)
{
init_timer(&hil_mlcs_kicker);
hil_mlcs_kicker.expires = jiffies + HZ;
hil_mlcs_kicker.function = &hil_mlcs_timer;
add_timer(&hil_mlcs_kicker);
setup_timer(&hil_mlcs_kicker, &hil_mlcs_timer, 0);
mod_timer(&hil_mlcs_kicker, jiffies + HZ);
tasklet_enable(&hil_mlcs_tasklet);
......@@ -1005,7 +1003,7 @@ static int __init hil_mlc_init(void)
static void __exit hil_mlc_exit(void)
{
del_timer(&hil_mlcs_kicker);
del_timer_sync(&hil_mlcs_kicker);
tasklet_disable(&hil_mlcs_tasklet);
tasklet_kill(&hil_mlcs_tasklet);
......
......@@ -157,6 +157,14 @@ static const struct dmi_system_id __initconst i8042_dmi_noloop_table[] = {
DMI_MATCH(DMI_PRODUCT_VERSION, "01"),
},
},
{
/* Gigabyte M1022M netbook */
.matches = {
DMI_MATCH(DMI_BOARD_VENDOR, "Gigabyte Technology Co.,Ltd."),
DMI_MATCH(DMI_BOARD_NAME, "M1022E"),
DMI_MATCH(DMI_BOARD_VERSION, "1.02"),
},
},
{
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
......
......@@ -126,6 +126,8 @@ static unsigned char i8042_suppress_kbd_ack;
static struct platform_device *i8042_platform_device;
static irqreturn_t i8042_interrupt(int irq, void *dev_id);
static bool (*i8042_platform_filter)(unsigned char data, unsigned char str,
struct serio *serio);
void i8042_lock_chip(void)
{
......@@ -139,6 +141,48 @@ void i8042_unlock_chip(void)
}
EXPORT_SYMBOL(i8042_unlock_chip);
int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
struct serio *serio))
{
unsigned long flags;
int ret = 0;
spin_lock_irqsave(&i8042_lock, flags);
if (i8042_platform_filter) {
ret = -EBUSY;
goto out;
}
i8042_platform_filter = filter;
out:
spin_unlock_irqrestore(&i8042_lock, flags);
return ret;
}
EXPORT_SYMBOL(i8042_install_filter);
int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
struct serio *port))
{
unsigned long flags;
int ret = 0;
spin_lock_irqsave(&i8042_lock, flags);
if (i8042_platform_filter != filter) {
ret = -EINVAL;
goto out;
}
i8042_platform_filter = NULL;
out:
spin_unlock_irqrestore(&i8042_lock, flags);
return ret;
}
EXPORT_SYMBOL(i8042_remove_filter);
/*
* The i8042_wait_read() and i8042_wait_write functions wait for the i8042 to
* be ready for reading values from it / writing values to it.
......@@ -368,6 +412,31 @@ static void i8042_stop(struct serio *serio)
port->serio = NULL;
}
/*
* i8042_filter() filters out unwanted bytes from the input data stream.
* It is called from i8042_interrupt and thus is running with interrupts
* off and i8042_lock held.
*/
static bool i8042_filter(unsigned char data, unsigned char str,
struct serio *serio)
{
if (unlikely(i8042_suppress_kbd_ack)) {
if ((~str & I8042_STR_AUXDATA) &&
(data == 0xfa || data == 0xfe)) {
i8042_suppress_kbd_ack--;
dbg("Extra keyboard ACK - filtered out\n");
return true;
}
}
if (i8042_platform_filter && i8042_platform_filter(data, str, serio)) {
dbg("Filtered out by platfrom filter\n");
return true;
}
return false;
}
/*
* i8042_interrupt() is the most important function in this driver -
* it handles the interrupts from the i8042, and sends incoming bytes
......@@ -377,13 +446,16 @@ static void i8042_stop(struct serio *serio)
static irqreturn_t i8042_interrupt(int irq, void *dev_id)
{
struct i8042_port *port;
struct serio *serio;
unsigned long flags;
unsigned char str, data;
unsigned int dfl;
unsigned int port_no;
bool filtered;
int ret = 1;
spin_lock_irqsave(&i8042_lock, flags);
str = i8042_read_status();
if (unlikely(~str & I8042_STR_OBF)) {
spin_unlock_irqrestore(&i8042_lock, flags);
......@@ -391,8 +463,8 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
ret = 0;
goto out;
}
data = i8042_read_data();
spin_unlock_irqrestore(&i8042_lock, flags);
if (i8042_mux_present && (str & I8042_STR_AUXDATA)) {
static unsigned long last_transmit;
......@@ -441,21 +513,19 @@ static irqreturn_t i8042_interrupt(int irq, void *dev_id)
}
port = &i8042_ports[port_no];
serio = port->exists ? port->serio : NULL;
dbg("%02x <- i8042 (interrupt, %d, %d%s%s)",
data, port_no, irq,
dfl & SERIO_PARITY ? ", bad parity" : "",
dfl & SERIO_TIMEOUT ? ", timeout" : "");
if (unlikely(i8042_suppress_kbd_ack))
if (port_no == I8042_KBD_PORT_NO &&
(data == 0xfa || data == 0xfe)) {
i8042_suppress_kbd_ack--;
goto out;
}
filtered = i8042_filter(data, str, serio);
spin_unlock_irqrestore(&i8042_lock, flags);
if (likely(port->exists))
serio_interrupt(port->serio, data, dfl);
if (likely(port->exists && !filtered))
serio_interrupt(serio, data, dfl);
out:
return IRQ_RETVAL(ret);
......
......@@ -180,8 +180,8 @@ static void __devinit ps2_clear_input(struct ps2if *ps2if)
}
}
static inline unsigned int
ps2_test_one(struct ps2if *ps2if, unsigned int mask)
static unsigned int __devinit ps2_test_one(struct ps2if *ps2if,
unsigned int mask)
{
unsigned int val;
......@@ -197,7 +197,7 @@ ps2_test_one(struct ps2if *ps2if, unsigned int mask)
* Test the keyboard interface. We basically check to make sure that
* we can drive each line to the keyboard independently of each other.
*/
static int __init ps2_test(struct ps2if *ps2if)
static int __devinit ps2_test(struct ps2if *ps2if)
{
unsigned int stat;
int ret = 0;
......@@ -312,7 +312,7 @@ static int __devinit ps2_probe(struct sa1111_dev *dev)
/*
* Remove one device from this driver.
*/
static int ps2_remove(struct sa1111_dev *dev)
static int __devexit ps2_remove(struct sa1111_dev *dev)
{
struct ps2if *ps2if = sa1111_get_drvdata(dev);
......@@ -335,7 +335,7 @@ static struct sa1111_driver ps2_driver = {
},
.devid = SA1111_DEVID_PS2,
.probe = ps2_probe,
.remove = ps2_remove,
.remove = __devexit_p(ps2_remove),
};
static int __init ps2_init(void)
......
/*
* drivers/input/tablet/wacom.h
*
* USB Wacom Graphire and Wacom Intuos tablet support
* USB Wacom tablet support
*
* Copyright (c) 2000-2004 Vojtech Pavlik <vojtech@ucw.cz>
* Copyright (c) 2000 Andreas Bach Aaen <abach@stofanet.dk>
......@@ -69,6 +69,9 @@
* v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
* v1.50 (pc) - Fixed a TabletPC touch bug in 2.6.28
* v1.51 (pc) - Added support for Intuos4
* v1.52 (pc) - Query Wacom data upon system resume
* - add defines for features->type
* - add new devices (0x9F, 0xE2, and 0XE3)
*/
/*
......@@ -89,9 +92,9 @@
/*
* Version Information
*/
#define DRIVER_VERSION "v1.51"
#define DRIVER_VERSION "v1.52"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
#define DRIVER_DESC "USB Wacom tablet driver"
#define DRIVER_LICENSE "GPL"
MODULE_AUTHOR(DRIVER_AUTHOR);
......@@ -133,6 +136,8 @@ extern void input_dev_i4s(struct input_dev *input_dev, struct wacom_wac *wacom_w
extern void input_dev_i4(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern void input_dev_tpc(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern void input_dev_tpc2fg(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern void input_dev_mo(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern void input_dev_bee(struct input_dev *input_dev, struct wacom_wac *wacom_wac);
extern __u16 wacom_le16_to_cpu(unsigned char *data);
......
/*
* drivers/input/tablet/wacom_sys.c
*
* USB Wacom Graphire and Wacom Intuos tablet support - system specific code
* USB Wacom tablet support - system specific code
*/
/*
......@@ -209,6 +209,7 @@ void input_dev_g(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_dev->keybit[BIT_WORD(BTN_MOUSE)] |= BIT_MASK(BTN_LEFT) |
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
BIT_MASK(BTN_TOOL_PEN) | BIT_MASK(BTN_STYLUS) |
BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_STYLUS2);
input_set_abs_params(input_dev, ABS_DISTANCE, 0, wacom_wac->features->distance_max, 0, 0);
}
......@@ -256,6 +257,7 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_MIDDLE) |
BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER) |
BIT_MASK(BTN_TOOL_PEN) | BIT_MASK(BTN_STYLUS) |
BIT_MASK(BTN_TOOL_MOUSE) | BIT_MASK(BTN_TOOL_BRUSH) |
BIT_MASK(BTN_TOOL_PENCIL) | BIT_MASK(BTN_TOOL_AIRBRUSH) |
BIT_MASK(BTN_TOOL_LENS) | BIT_MASK(BTN_STYLUS2);
......@@ -269,7 +271,8 @@ void input_dev_i(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
void input_dev_pl(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_STYLUS2);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) |
BIT_MASK(BTN_STYLUS) | BIT_MASK(BTN_STYLUS2);
}
void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
......@@ -277,12 +280,32 @@ void input_dev_pt(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_RUBBER);
}
void input_dev_tpc(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
if (wacom_wac->features->device_type == BTN_TOOL_DOUBLETAP ||
wacom_wac->features->device_type == BTN_TOOL_TRIPLETAP) {
input_set_abs_params(input_dev, ABS_RX, 0, wacom_wac->features->x_phy, 0, 0);
input_set_abs_params(input_dev, ABS_RY, 0, wacom_wac->features->y_phy, 0, 0);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP);
}
}
void input_dev_tpc2fg(struct input_dev *input_dev, struct wacom_wac *wacom_wac)
{
if (wacom_wac->features->device_type == BTN_TOOL_TRIPLETAP) {
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_TRIPLETAP);
input_dev->evbit[0] |= BIT_MASK(EV_MSC);
input_dev->mscbit[0] |= BIT_MASK(MSC_SERIAL);
}
}
static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hid_desc,
struct wacom_wac *wacom_wac)
struct wacom_features *features)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct wacom_features *features = wacom_wac->features;
char limit = 0, result = 0;
char limit = 0;
/* result has to be defined as int for some devices */
int result = 0;
int i = 0, usage = WCM_UNDEFINED, finger = 0, pen = 0;
unsigned char *report;
......@@ -328,13 +351,24 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
case HID_USAGE_X:
if (usage == WCM_DESKTOP) {
if (finger) {
features->touch_x_max =
features->touch_y_max =
wacom_le16_to_cpu(&report[i + 3]);
features->device_type = BTN_TOOL_DOUBLETAP;
if (features->type == TABLETPC2FG) {
/* need to reset back */
features->pktlen = WACOM_PKGLEN_TPC2FG;
features->device_type = BTN_TOOL_TRIPLETAP;
}
features->x_max =
wacom_le16_to_cpu(&report[i + 3]);
features->x_phy =
wacom_le16_to_cpu(&report[i + 6]);
i += 7;
features->unit = report[i + 9];
features->unitExpo = report[i + 11];
i += 12;
} else if (pen) {
/* penabled only accepts exact bytes of data */
if (features->type == TABLETPC2FG)
features->pktlen = WACOM_PKGLEN_PENABLED;
features->device_type = BTN_TOOL_PEN;
features->x_max =
wacom_le16_to_cpu(&report[i + 3]);
i += 4;
......@@ -350,10 +384,35 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
break;
case HID_USAGE_Y:
if (usage == WCM_DESKTOP)
features->y_max =
wacom_le16_to_cpu(&report[i + 3]);
i += 4;
if (usage == WCM_DESKTOP) {
if (finger) {
features->device_type = BTN_TOOL_DOUBLETAP;
if (features->type == TABLETPC2FG) {
/* need to reset back */
features->pktlen = WACOM_PKGLEN_TPC2FG;
features->device_type = BTN_TOOL_TRIPLETAP;
features->y_max =
wacom_le16_to_cpu(&report[i + 3]);
features->y_phy =
wacom_le16_to_cpu(&report[i + 6]);
i += 7;
} else {
features->y_max =
features->x_max;
features->y_phy =
wacom_le16_to_cpu(&report[i + 3]);
i += 4;
}
} else if (pen) {
/* penabled only accepts exact bytes of data */
if (features->type == TABLETPC2FG)
features->pktlen = WACOM_PKGLEN_PENABLED;
features->device_type = BTN_TOOL_PEN;
features->y_max =
wacom_le16_to_cpu(&report[i + 3]);
i += 4;
}
}
break;
case HID_USAGE_FINGER:
......@@ -376,7 +435,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
break;
case HID_COLLECTION:
/* reset UsagePage ans Finger */
/* reset UsagePage and Finger */
finger = usage = 0;
break;
}
......@@ -388,43 +447,92 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
return result;
}
static int wacom_query_tablet_data(struct usb_interface *intf)
static int wacom_query_tablet_data(struct usb_interface *intf, struct wacom_features *features)
{
unsigned char *rep_data;
int limit = 0;
int error;
int limit = 0, report_id = 2;
int error = -ENOMEM;
rep_data = kmalloc(2, GFP_KERNEL);
if (!rep_data)
return -ENOMEM;
do {
rep_data[0] = 2;
rep_data[1] = 2;
error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
2, rep_data, 2);
if (error >= 0)
error = usb_get_report(intf,
WAC_HID_FEATURE_REPORT, 2,
rep_data, 2);
} while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
return error;
/* ask to report tablet data if it is 2FGT or not a Tablet PC */
if (features->device_type == BTN_TOOL_TRIPLETAP) {
do {
rep_data[0] = 3;
rep_data[1] = 4;
report_id = 3;
error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
report_id, rep_data, 2);
if (error >= 0)
error = usb_get_report(intf,
WAC_HID_FEATURE_REPORT, report_id,
rep_data, 3);
} while ((error < 0 || rep_data[1] != 4) && limit++ < 5);
} else if (features->type != TABLETPC && features->type != TABLETPC2FG) {
do {
rep_data[0] = 2;
rep_data[1] = 2;
error = usb_set_report(intf, WAC_HID_FEATURE_REPORT,
report_id, rep_data, 2);
if (error >= 0)
error = usb_get_report(intf,
WAC_HID_FEATURE_REPORT, report_id,
rep_data, 2);
} while ((error < 0 || rep_data[1] != 2) && limit++ < 5);
}
kfree(rep_data);
return error < 0 ? error : 0;
}
static int wacom_retrieve_hid_descriptor(struct usb_interface *intf,
struct wacom_features *features)
{
int error = 0;
struct usb_host_interface *interface = intf->cur_altsetting;
struct hid_descriptor *hid_desc;
/* default device to penabled */
features->device_type = BTN_TOOL_PEN;
/* only Tablet PCs need to retrieve the info */
if ((features->type != TABLETPC) && (features->type != TABLETPC2FG))
goto out;
if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
if (usb_get_extra_descriptor(&interface->endpoint[0],
HID_DEVICET_REPORT, &hid_desc)) {
printk("wacom: can not retrieve extra class descriptor\n");
error = 1;
goto out;
}
}
error = wacom_parse_hid(intf, hid_desc, features);
if (error)
goto out;
/* touch device found but size is not defined. use default */
if (features->device_type == BTN_TOOL_DOUBLETAP && !features->x_max) {
features->x_max = 1023;
features->y_max = 1023;
}
out:
return error;
}
static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *id)
{
struct usb_device *dev = interface_to_usbdev(intf);
struct usb_host_interface *interface = intf->cur_altsetting;
struct usb_endpoint_descriptor *endpoint;
struct wacom *wacom;
struct wacom_wac *wacom_wac;
struct wacom_features *features;
struct input_dev *input_dev;
int error = -ENOMEM;
struct hid_descriptor *hid_desc;
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
wacom_wac = kzalloc(sizeof(struct wacom_wac), GFP_KERNEL);
......@@ -432,7 +540,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
if (!wacom || !input_dev || !wacom_wac)
goto fail1;
wacom_wac->data = usb_buffer_alloc(dev, 10, GFP_KERNEL, &wacom->data_dma);
wacom_wac->data = usb_buffer_alloc(dev, WACOM_PKGLEN_MAX, GFP_KERNEL, &wacom->data_dma);
if (!wacom_wac->data)
goto fail1;
......@@ -448,7 +556,7 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
strlcat(wacom->phys, "/input0", sizeof(wacom->phys));
wacom_wac->features = features = get_wacom_feature(id);
BUG_ON(features->pktlen > 10);
BUG_ON(features->pktlen > WACOM_PKGLEN_MAX);
input_dev->name = wacom_wac->features->name;
wacom->wacom_wac = wacom_wac;
......@@ -463,47 +571,24 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
endpoint = &intf->cur_altsetting->endpoint[0].desc;
/* Initialize touch_x_max and touch_y_max in case it is not defined */
if (wacom_wac->features->type == TABLETPC) {
features->touch_x_max = 1023;
features->touch_y_max = 1023;
} else {
features->touch_x_max = 0;
features->touch_y_max = 0;
}
/* TabletPC need to retrieve the physical and logical maximum from report descriptor */
if (wacom_wac->features->type == TABLETPC) {
if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
if (usb_get_extra_descriptor(&interface->endpoint[0],
HID_DEVICET_REPORT, &hid_desc)) {
printk("wacom: can not retrive extra class descriptor\n");
goto fail2;
}
}
error = wacom_parse_hid(intf, hid_desc, wacom_wac);
if (error)
goto fail2;
}
/* Retrieve the physical and logical size for OEM devices */
error = wacom_retrieve_hid_descriptor(intf, features);
if (error)
goto fail2;
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_PEN) |
BIT_MASK(BTN_TOUCH) | BIT_MASK(BTN_STYLUS);
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOUCH);
input_set_abs_params(input_dev, ABS_X, 0, features->x_max, 4, 0);
input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, 4, 0);
input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, 0, 0);
if (features->type == TABLETPC) {
input_dev->keybit[BIT_WORD(BTN_DIGI)] |= BIT_MASK(BTN_TOOL_DOUBLETAP);
input_set_abs_params(input_dev, ABS_RX, 0, features->touch_x_max, 4, 0);
input_set_abs_params(input_dev, ABS_RY, 0, features->touch_y_max, 4, 0);
}
input_dev->absbit[BIT_WORD(ABS_MISC)] |= BIT_MASK(ABS_MISC);
wacom_init_input_dev(input_dev, wacom_wac);
usb_fill_int_urb(wacom->irq, dev,
usb_rcvintpipe(dev, endpoint->bEndpointAddress),
wacom_wac->data, wacom_wac->features->pktlen,
wacom_wac->data, features->pktlen,
wacom_sys_irq, wacom, endpoint->bInterval);
wacom->irq->transfer_dma = wacom->data_dma;
wacom->irq->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
......@@ -512,18 +597,14 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
if (error)
goto fail3;
/*
* Ask the tablet to report tablet data if it is not a Tablet PC.
* Note that if query fails it is not a hard failure.
*/
if (wacom_wac->features->type != TABLETPC)
wacom_query_tablet_data(intf);
/* Note that if query fails it is not a hard failure */
wacom_query_tablet_data(intf, features);
usb_set_intfdata(intf, wacom);
return 0;
fail3: usb_free_urb(wacom->irq);
fail2: usb_buffer_free(dev, 10, wacom_wac->data, wacom->data_dma);
fail2: usb_buffer_free(dev, WACOM_PKGLEN_MAX, wacom_wac->data, wacom->data_dma);
fail1: input_free_device(input_dev);
kfree(wacom);
kfree(wacom_wac);
......@@ -539,7 +620,7 @@ static void wacom_disconnect(struct usb_interface *intf)
usb_kill_urb(wacom->irq);
input_unregister_device(wacom->dev);
usb_free_urb(wacom->irq);
usb_buffer_free(interface_to_usbdev(intf), 10,
usb_buffer_free(interface_to_usbdev(intf), WACOM_PKGLEN_MAX,
wacom->wacom_wac->data, wacom->data_dma);
kfree(wacom->wacom_wac);
kfree(wacom);
......@@ -559,12 +640,16 @@ static int wacom_suspend(struct usb_interface *intf, pm_message_t message)
static int wacom_resume(struct usb_interface *intf)
{
struct wacom *wacom = usb_get_intfdata(intf);
struct wacom_features *features = wacom->wacom_wac->features;
int rv;
mutex_lock(&wacom->lock);
if (wacom->open)
if (wacom->open) {
rv = usb_submit_urb(wacom->irq, GFP_NOIO);
else
/* switch to wacom mode if needed */
if (!wacom_retrieve_hid_descriptor(intf, features))
wacom_query_tablet_data(intf, features);
} else
rv = 0;
mutex_unlock(&wacom->lock);
......
此差异已折叠。
......@@ -9,12 +9,33 @@
#ifndef WACOM_WAC_H
#define WACOM_WAC_H
/* maximum packet length for USB devices */
#define WACOM_PKGLEN_MAX 32
/* packet length for individual models */
#define WACOM_PKGLEN_PENPRTN 7
#define WACOM_PKGLEN_GRAPHIRE 8
#define WACOM_PKGLEN_BBFUN 9
#define WACOM_PKGLEN_INTUOS 10
#define WACOM_PKGLEN_PENABLED 8
#define WACOM_PKGLEN_TPC1FG 5
#define WACOM_PKGLEN_TPC2FG 14
/* device IDs */
#define STYLUS_DEVICE_ID 0x02
#define TOUCH_DEVICE_ID 0x03
#define CURSOR_DEVICE_ID 0x06
#define ERASER_DEVICE_ID 0x0A
#define PAD_DEVICE_ID 0x0F
/* wacom data packet report IDs */
#define WACOM_REPORT_PENABLED 2
#define WACOM_REPORT_INTUOSREAD 5
#define WACOM_REPORT_INTUOSWRITE 6
#define WACOM_REPORT_INTUOSPAD 12
#define WACOM_REPORT_TPC1FG 6
#define WACOM_REPORT_TPC2FG 13
enum {
PENPARTNER = 0,
GRAPHIRE,
......@@ -32,6 +53,7 @@ enum {
WACOM_BEE,
WACOM_MO,
TABLETPC,
TABLETPC2FG,
MAX_TYPE
};
......@@ -43,8 +65,11 @@ struct wacom_features {
int pressure_max;
int distance_max;
int type;
int touch_x_max;
int touch_y_max;
int device_type;
int x_phy;
int y_phy;
unsigned char unit;
unsigned char unitExpo;
};
struct wacom_wac {
......
......@@ -450,6 +450,18 @@ config TOUCHSCREEN_USB_COMPOSITE
To compile this driver as a module, choose M here: the
module will be called usbtouchscreen.
config TOUCHSCREEN_MC13783
tristate "Freescale MC13783 touchscreen input driver"
depends on MFD_MC13783
help
Say Y here if you have an Freescale MC13783 PMIC on your
board and want to use its touchscreen
If unsure, say N.
To compile this driver as a module, choose M here: the
module will be called mc13783_ts.
config TOUCHSCREEN_USB_EGALAX
default y
bool "eGalax, eTurboTouch CT-410/510/700 device support" if EMBEDDED
......
......@@ -18,6 +18,7 @@ obj-$(CONFIG_TOUCHSCREEN_EETI) += eeti_ts.o
obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o
obj-$(CONFIG_TOUCHSCREEN_FUJITSU) += fujitsu_ts.o
obj-$(CONFIG_TOUCHSCREEN_INEXIO) += inexio.o
obj-$(CONFIG_TOUCHSCREEN_MC13783) += mc13783_ts.o
obj-$(CONFIG_TOUCHSCREEN_MCS5000) += mcs5000_ts.o
obj-$(CONFIG_TOUCHSCREEN_MIGOR) += migor_ts.o
obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o
......
/*
* Driver for the Freescale Semiconductor MC13783 touchscreen.
*
* Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
* Copyright (C) 2009 Sascha Hauer, Pengutronix
*
* Initial development of this code was funded by
* Phytec Messtechnik GmbH, http://www.phytec.de/
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published by
* the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/mfd/mc13783.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/input.h>
#include <linux/sched.h>
#include <linux/init.h>
#define MC13783_TS_NAME "mc13783-ts"
#define DEFAULT_SAMPLE_TOLERANCE 300
static unsigned int sample_tolerance = DEFAULT_SAMPLE_TOLERANCE;
module_param(sample_tolerance, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(sample_tolerance,
"If the minimal and maximal value read out for one axis (out "
"of three) differ by this value (default: "
__stringify(DEFAULT_SAMPLE_TOLERANCE) ") or more, the reading "
"is supposed to be wrong and is discarded. Set to 0 to "
"disable this check.");
struct mc13783_ts_priv {
struct input_dev *idev;
struct mc13783 *mc13783;
struct delayed_work work;
struct workqueue_struct *workq;
unsigned int sample[4];
};
static irqreturn_t mc13783_ts_handler(int irq, void *data)
{
struct mc13783_ts_priv *priv = data;
mc13783_ackirq(priv->mc13783, irq);
/*
* Kick off reading coordinates. Note that if work happens already
* be queued for future execution (it rearms itself) it will not
* be rescheduled for immediate execution here. However the rearm
* delay is HZ / 50 which is acceptable.
*/
queue_delayed_work(priv->workq, &priv->work, 0);
return IRQ_HANDLED;
}
#define sort3(a0, a1, a2) ({ \
if (a0 > a1) \
swap(a0, a1); \
if (a1 > a2) \
swap(a1, a2); \
if (a0 > a1) \
swap(a0, a1); \
})
static void mc13783_ts_report_sample(struct mc13783_ts_priv *priv)
{
struct input_dev *idev = priv->idev;
int x0, x1, x2, y0, y1, y2;
int cr0, cr1;
/*
* the values are 10-bit wide only, but the two least significant
* bits are for future 12 bit use and reading yields 0
*/
x0 = priv->sample[0] & 0xfff;
x1 = priv->sample[1] & 0xfff;
x2 = priv->sample[2] & 0xfff;
y0 = priv->sample[3] & 0xfff;
y1 = (priv->sample[0] >> 12) & 0xfff;
y2 = (priv->sample[1] >> 12) & 0xfff;
cr0 = (priv->sample[2] >> 12) & 0xfff;
cr1 = (priv->sample[3] >> 12) & 0xfff;
dev_dbg(&idev->dev,
"x: (% 4d,% 4d,% 4d) y: (% 4d, % 4d,% 4d) cr: (% 4d, % 4d)\n",
x0, x1, x2, y0, y1, y2, cr0, cr1);
sort3(x0, x1, x2);
sort3(y0, y1, y2);
cr0 = (cr0 + cr1) / 2;
if (!cr0 || !sample_tolerance ||
(x2 - x0 < sample_tolerance &&
y2 - y0 < sample_tolerance)) {
/* report the median coordinate and average pressure */
if (cr0) {
input_report_abs(idev, ABS_X, x1);
input_report_abs(idev, ABS_Y, y1);
dev_dbg(&idev->dev, "report (%d, %d, %d)\n",
x1, y1, 0x1000 - cr0);
queue_delayed_work(priv->workq, &priv->work, HZ / 50);
} else
dev_dbg(&idev->dev, "report release\n");
input_report_abs(idev, ABS_PRESSURE,
cr0 ? 0x1000 - cr0 : cr0);
input_report_key(idev, BTN_TOUCH, cr0);
input_sync(idev);
} else
dev_dbg(&idev->dev, "discard event\n");
}
static void mc13783_ts_work(struct work_struct *work)
{
struct mc13783_ts_priv *priv =
container_of(work, struct mc13783_ts_priv, work.work);
unsigned int mode = MC13783_ADC_MODE_TS;
unsigned int channel = 12;
if (mc13783_adc_do_conversion(priv->mc13783,
mode, channel, priv->sample) == 0)
mc13783_ts_report_sample(priv);
}
static int mc13783_ts_open(struct input_dev *dev)
{
struct mc13783_ts_priv *priv = input_get_drvdata(dev);
int ret;
mc13783_lock(priv->mc13783);
mc13783_ackirq(priv->mc13783, MC13783_IRQ_TS);
ret = mc13783_irq_request(priv->mc13783, MC13783_IRQ_TS,
mc13783_ts_handler, MC13783_TS_NAME, priv);
if (ret)
goto out;
ret = mc13783_reg_rmw(priv->mc13783, MC13783_ADC0,
MC13783_ADC0_TSMOD_MASK, MC13783_ADC0_TSMOD0);
if (ret)
mc13783_irq_free(priv->mc13783, MC13783_IRQ_TS, priv);
out:
mc13783_unlock(priv->mc13783);
return ret;
}
static void mc13783_ts_close(struct input_dev *dev)
{
struct mc13783_ts_priv *priv = input_get_drvdata(dev);
mc13783_lock(priv->mc13783);
mc13783_reg_rmw(priv->mc13783, MC13783_ADC0,
MC13783_ADC0_TSMOD_MASK, 0);
mc13783_irq_free(priv->mc13783, MC13783_IRQ_TS, priv);
mc13783_unlock(priv->mc13783);
cancel_delayed_work_sync(&priv->work);
}
static int __init mc13783_ts_probe(struct platform_device *pdev)
{
struct mc13783_ts_priv *priv;
struct input_dev *idev;
int ret = -ENOMEM;
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
idev = input_allocate_device();
if (!priv || !idev)
goto err_free_mem;
INIT_DELAYED_WORK(&priv->work, mc13783_ts_work);
priv->mc13783 = dev_get_drvdata(pdev->dev.parent);
priv->idev = idev;
/*
* We need separate workqueue because mc13783_adc_do_conversion
* uses keventd and thus would deadlock.
*/
priv->workq = create_singlethread_workqueue("mc13783_ts");
if (!priv->workq)
goto err_free_mem;
idev->name = MC13783_TS_NAME;
idev->dev.parent = &pdev->dev;
idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
input_set_abs_params(idev, ABS_X, 0, 0xfff, 0, 0);
input_set_abs_params(idev, ABS_Y, 0, 0xfff, 0, 0);
input_set_abs_params(idev, ABS_PRESSURE, 0, 0xfff, 0, 0);
idev->open = mc13783_ts_open;
idev->close = mc13783_ts_close;
input_set_drvdata(idev, priv);
ret = input_register_device(priv->idev);
if (ret) {
dev_err(&pdev->dev,
"register input device failed with %d\n", ret);
goto err_destroy_wq;
}
platform_set_drvdata(pdev, priv);
return 0;
err_destroy_wq:
destroy_workqueue(priv->workq);
err_free_mem:
input_free_device(idev);
kfree(priv);
return ret;
}
static int __devexit mc13783_ts_remove(struct platform_device *pdev)
{
struct mc13783_ts_priv *priv = platform_get_drvdata(pdev);
platform_set_drvdata(pdev, NULL);
destroy_workqueue(priv->workq);
input_unregister_device(priv->idev);
kfree(priv);
return 0;
}
static struct platform_driver mc13783_ts_driver = {
.remove = __devexit_p(mc13783_ts_remove),
.driver = {
.owner = THIS_MODULE,
.name = MC13783_TS_NAME,
},
};
static int __init mc13783_ts_init(void)
{
return platform_driver_probe(&mc13783_ts_driver, &mc13783_ts_probe);
}
module_init(mc13783_ts_init);
static void __exit mc13783_ts_exit(void)
{
platform_driver_unregister(&mc13783_ts_driver);
}
module_exit(mc13783_ts_exit);
MODULE_DESCRIPTION("MC13783 input touchscreen driver");
MODULE_AUTHOR("Sascha Hauer <s.hauer@pengutronix.de>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:" MC13783_TS_NAME);
......@@ -39,6 +39,10 @@ void i8042_lock_chip(void);
void i8042_unlock_chip(void);
int i8042_command(unsigned char *param, int command);
bool i8042_check_port_owner(const struct serio *);
int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
struct serio *serio));
int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
struct serio *serio));
#else
......@@ -52,7 +56,7 @@ void i8042_unlock_chip(void)
int i8042_command(unsigned char *param, int command)
{
return -ENOSYS;
return -ENODEV;
}
bool i8042_check_port_owner(const struct serio *serio)
......@@ -60,6 +64,18 @@ bool i8042_check_port_owner(const struct serio *serio)
return false;
}
int i8042_install_filter(bool (*filter)(unsigned char data, unsigned char str,
struct serio *serio))
{
return -ENODEV;
}
int i8042_remove_filter(bool (*filter)(unsigned char data, unsigned char str,
struct serio *serio))
{
return -ENODEV;
}
#endif
#endif
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册