Merge tag 'staging-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for issues that have been
  reported in 5.10-rc1:

   - octeon driver fixes

   - wfx driver fixes

   - memory leak fix in vchiq driver

   - fieldbus driver bugfix

   - comedi driver bugfix

  All of these have been in linux-next with no reported issues"

* tag 'staging-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: fieldbus: anybuss: jump to correct label in an error path
  staging: wfx: fix test on return value of gpiod_get_value()
  staging: wfx: fix use of uninitialized pointer
  staging: mmal-vchiq: Fix memory leak for vchiq_instance
  staging: comedi: cb_pcidas: Allow 2-channel commands for AO subdevice
  staging: octeon: Drop on uncorrectable alignment or FCS error
  staging: octeon: repair "fixed-link" support

drivers/staging/comedi/drivers/cb_pcidas.c

@@ -1342,6 +1342,7 @@ static int cb_pcidas_auto_attach(struct comedi_device *dev,
 		if (dev->irq && board->has_ao_fifo) {
 			dev->write_subdev = s;
 			s->subdev_flags	|= SDF_CMD_WRITE;
+			s->len_chanlist	= s->n_chan;
 			s->do_cmdtest	= cb_pcidas_ao_cmdtest;
 			s->do_cmd	= cb_pcidas_ao_cmd;
 			s->cancel	= cb_pcidas_ao_cancel;

drivers/staging/fieldbus/anybuss/arcx-anybus.c

@@ -293,7 +293,7 @@ static int controller_probe(struct platform_device *pdev)
 	regulator = devm_regulator_register(dev, &can_power_desc, &config);
 	if (IS_ERR(regulator)) {
 		err = PTR_ERR(regulator);
-		goto out_reset;
+		goto out_ida;
 	}
 	/* make controller info visible to userspace */
 	cd->class_dev = kzalloc(sizeof(*cd->class_dev), GFP_KERNEL);

drivers/staging/octeon/ethernet-mdio.c

@@ -147,12 +147,6 @@ int cvm_oct_phy_setup_device(struct net_device *dev)
 
 	phy_node = of_parse_phandle(priv->of_node, "phy-handle", 0);
 	if (!phy_node && of_phy_is_fixed_link(priv->of_node)) {
-		int rc;
-
-		rc = of_phy_register_fixed_link(priv->of_node);
-		if (rc)
-			return rc;
-
 		phy_node = of_node_get(priv->of_node);
 	}
 	if (!phy_node)

drivers/staging/octeon/ethernet-rx.c

@@ -69,15 +69,17 @@ static inline int cvm_oct_check_rcv_error(struct cvmx_wqe *work)
 	else
 		port = work->word1.cn38xx.ipprt;
 
-	if ((work->word2.snoip.err_code == 10) && (work->word1.len <= 64)) {
+	if ((work->word2.snoip.err_code == 10) && (work->word1.len <= 64))
 		/*
 		 * Ignore length errors on min size packets. Some
 		 * equipment incorrectly pads packets to 64+4FCS
 		 * instead of 60+4FCS.  Note these packets still get
 		 * counted as frame errors.
 		 */
-	} else if (work->word2.snoip.err_code == 5 ||
-		   work->word2.snoip.err_code == 7) {
+		return 0;
+
+	if (work->word2.snoip.err_code == 5 ||
+	    work->word2.snoip.err_code == 7) {
 		/*
 		 * We received a packet with either an alignment error
 		 * or a FCS error. This may be signalling that we are
@@ -108,7 +110,10 @@ static inline int cvm_oct_check_rcv_error(struct cvmx_wqe *work)
 				/* Port received 0xd5 preamble */
 				work->packet_ptr.s.addr += i + 1;
 				work->word1.len -= i + 5;
-			} else if ((*ptr & 0xf) == 0xd) {
+				return 0;
+			}
+
+			if ((*ptr & 0xf) == 0xd) {
 				/* Port received 0xd preamble */
 				work->packet_ptr.s.addr += i;
 				work->word1.len -= i + 4;
@@ -118,21 +123,20 @@ static inline int cvm_oct_check_rcv_error(struct cvmx_wqe *work)
 					    ((*(ptr + 1) & 0xf) << 4);
 					ptr++;
 				}
-			} else {
-				printk_ratelimited("Port %d unknown preamble, packet dropped\n",
-						   port);
-				cvm_oct_free_work(work);
-				return 1;
+				return 0;
 			}
+
+			printk_ratelimited("Port %d unknown preamble, packet dropped\n",
+					   port);
+			cvm_oct_free_work(work);
+			return 1;
 		}
-	} else {
-		printk_ratelimited("Port %d receive error code %d, packet dropped\n",
-				   port, work->word2.snoip.err_code);
-		cvm_oct_free_work(work);
-		return 1;
 	}
 
-	return 0;
+	printk_ratelimited("Port %d receive error code %d, packet dropped\n",
+			   port, work->word2.snoip.err_code);
+	cvm_oct_free_work(work);
+	return 1;
 }
 
 static void copy_segments_to_skb(struct cvmx_wqe *work, struct sk_buff *skb)

drivers/staging/octeon/ethernet.c

@@ -13,6 +13,7 @@
 #include <linux/phy.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
+#include <linux/of_mdio.h>
 #include <linux/of_net.h>
 #include <linux/if_ether.h>
 #include <linux/if_vlan.h>
@@ -892,6 +893,14 @@ static int cvm_oct_probe(struct platform_device *pdev)
 				break;
 			}
 
+			if (priv->of_node && of_phy_is_fixed_link(priv->of_node)) {
+				if (of_phy_register_fixed_link(priv->of_node)) {
+					netdev_err(dev, "Failed to register fixed link for interface %d, port %d\n",
+						   interface, priv->port);
+					dev->netdev_ops = NULL;
+				}
+			}
+
 			if (!dev->netdev_ops) {
 				free_netdev(dev);
 			} else if (register_netdev(dev) < 0) {

drivers/staging/vc04_services/vchiq-mmal/mmal-vchiq.c

@@ -179,6 +179,9 @@ struct vchiq_mmal_instance {
 
 	/* ordered workqueue to process all bulk operations */
 	struct workqueue_struct *bulk_wq;
+
+	/* handle for a vchiq instance */
+	struct vchiq_instance *vchiq_instance;
 };
 
 static struct mmal_msg_context *
@@ -1840,6 +1843,7 @@ int vchiq_mmal_finalise(struct vchiq_mmal_instance *instance)
 
 	mutex_unlock(&instance->vchiq_mutex);
 
+	vchiq_shutdown(instance->vchiq_instance);
 	flush_workqueue(instance->bulk_wq);
 	destroy_workqueue(instance->bulk_wq);
 
@@ -1856,6 +1860,7 @@ EXPORT_SYMBOL_GPL(vchiq_mmal_finalise);
 int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance)
 {
 	int status;
+	int err = -ENODEV;
 	struct vchiq_mmal_instance *instance;
 	static struct vchiq_instance *vchiq_instance;
 	struct vchiq_service_params_kernel params = {
@@ -1890,17 +1895,21 @@ int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance)
 	status = vchiq_connect(vchiq_instance);
 	if (status) {
 		pr_err("Failed to connect VCHI instance (status=%d)\n", status);
-		return -EIO;
+		err = -EIO;
+		goto err_shutdown_vchiq;
 	}
 
 	instance = kzalloc(sizeof(*instance), GFP_KERNEL);
 
-	if (!instance)
-		return -ENOMEM;
+	if (!instance) {
+		err = -ENOMEM;
+		goto err_shutdown_vchiq;
+	}
 
 	mutex_init(&instance->vchiq_mutex);
 
 	instance->bulk_scratch = vmalloc(PAGE_SIZE);
+	instance->vchiq_instance = vchiq_instance;
 
 	mutex_init(&instance->context_map_lock);
 	idr_init_base(&instance->context_map, 1);
@@ -1932,7 +1941,9 @@ int vchiq_mmal_init(struct vchiq_mmal_instance **out_instance)
 err_free:
 	vfree(instance->bulk_scratch);
 	kfree(instance);
-	return -ENODEV;
+err_shutdown_vchiq:
+	vchiq_shutdown(vchiq_instance);
+	return err;
 }
 EXPORT_SYMBOL_GPL(vchiq_mmal_init);
 

drivers/staging/wfx/bh.c

@@ -21,7 +21,7 @@ static void device_wakeup(struct wfx_dev *wdev)
 
 	if (!wdev->pdata.gpio_wakeup)
 		return;
-	if (gpiod_get_value_cansleep(wdev->pdata.gpio_wakeup) >= 0)
+	if (gpiod_get_value_cansleep(wdev->pdata.gpio_wakeup) > 0)
 		return;
 
 	if (wfx_api_older_than(wdev, 1, 4)) {

drivers/staging/wfx/data_tx.c

@@ -31,13 +31,13 @@ static int wfx_get_hw_rate(struct wfx_dev *wdev,
 		}
 		return rate->idx + 14;
 	}
+	// WFx only support 2GHz, else band information should be retrieved
+	// from ieee80211_tx_info
+	band = wdev->hw->wiphy->bands[NL80211_BAND_2GHZ];
 	if (rate->idx >= band->n_bitrates) {
 		WARN(1, "wrong rate->idx value: %d", rate->idx);
 		return -1;
 	}
-	// WFx only support 2GHz, else band information should be retrieved
-	// from ieee80211_tx_info
-	band = wdev->hw->wiphy->bands[NL80211_BAND_2GHZ];
 	return band->bitrates[rate->idx].hw_value;
 }