提交 22cbc938 编写于 作者: T Thomas Gleixner

m32r: Convert opsput pld irq chip

Convert the irq chips to the new functions and use proper flow
handlers. handle_level_irq is appropriate.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Cc: Paul Mundt <lethal@linux-sh.org>
上级 883c0ccd
......@@ -107,44 +107,33 @@ static void enable_opsput_pld_irq(unsigned int irq)
outw(data, port);
}
static void mask_and_ack_opsput_pld(unsigned int irq)
static void mask_opsput_pld(struct irq_data *data)
{
disable_opsput_pld_irq(irq);
// mask_and_ack_opsput(M32R_IRQ_INT1);
disable_opsput_pld_irq(data->irq);
}
static void end_opsput_pld_irq(unsigned int irq)
static void unmask_opsput_pld(struct irq_data *data)
{
enable_opsput_pld_irq(irq);
enable_opsput_pld_irq(data->irq);
enable_opsput_irq(M32R_IRQ_INT1);
}
static unsigned int startup_opsput_pld_irq(unsigned int irq)
{
enable_opsput_pld_irq(irq);
return (0);
}
static void shutdown_opsput_pld_irq(unsigned int irq)
static void shutdown_opsput_pld(struct irq_data *data)
{
unsigned long port;
unsigned int pldirq;
pldirq = irq2pldirq(irq);
// shutdown_opsput_irq(M32R_IRQ_INT1);
pldirq = irq2pldirq(data->irq);
port = pldirq2port(pldirq);
outw(PLD_ICUCR_ILEVEL7, port);
}
static struct irq_chip opsput_pld_irq_type =
{
.name = "OPSPUT-PLD-IRQ",
.startup = startup_opsput_pld_irq,
.shutdown = shutdown_opsput_pld_irq,
.enable = enable_opsput_pld_irq,
.disable = disable_opsput_pld_irq,
.ack = mask_and_ack_opsput_pld,
.end = end_opsput_pld_irq
.name = "OPSPUT-PLD-IRQ",
.irq_shutdown = shutdown_opsput_pld,
.irq_mask = mask_opsput_pld,
.irq_unmask = unmask_opsput_pld,
};
/*
......@@ -332,28 +321,33 @@ void __init init_IRQ(void)
#ifdef CONFIG_SERIAL_M32R_PLDSIO
/* INT#1: SIO0 Receive on PLD */
set_irq_chip(PLD_IRQ_SIO0_RCV, &opsput_pld_irq_type);
set_irq_chip_and_handler(PLD_IRQ_SIO0_RCV, &opsput_pld_irq_type,
handle_level_irq);
pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_RCV)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03;
disable_opsput_pld_irq(PLD_IRQ_SIO0_RCV);
/* INT#1: SIO0 Send on PLD */
set_irq_chip(PLD_IRQ_SIO0_SND, &opsput_pld_irq_type);
set_irq_chip_and_handler(PLD_IRQ_SIO0_SND, &opsput_pld_irq_type,
handle_level_irq);
pld_icu_data[irq2pldirq(PLD_IRQ_SIO0_SND)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD03;
disable_opsput_pld_irq(PLD_IRQ_SIO0_SND);
#endif /* CONFIG_SERIAL_M32R_PLDSIO */
/* INT#1: CFC IREQ on PLD */
set_irq_chip(PLD_IRQ_CFIREQ, &opsput_pld_irq_type);
set_irq_chip_and_handler(PLD_IRQ_CFIREQ, &opsput_pld_irq_type,
handle_level_irq);
pld_icu_data[irq2pldirq(PLD_IRQ_CFIREQ)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD01; /* 'L' level sense */
disable_opsput_pld_irq(PLD_IRQ_CFIREQ);
/* INT#1: CFC Insert on PLD */
set_irq_chip(PLD_IRQ_CFC_INSERT, &opsput_pld_irq_type);
set_irq_chip_and_handler(PLD_IRQ_CFC_INSERT, &opsput_pld_irq_type,
handle_level_irq);
pld_icu_data[irq2pldirq(PLD_IRQ_CFC_INSERT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD00; /* 'L' edge sense */
disable_opsput_pld_irq(PLD_IRQ_CFC_INSERT);
/* INT#1: CFC Eject on PLD */
set_irq_chip(PLD_IRQ_CFC_EJECT, &opsput_pld_irq_type);
set_irq_chip_and_handler(PLD_IRQ_CFC_EJECT, &opsput_pld_irq_type,
handle_level_irq);
pld_icu_data[irq2pldirq(PLD_IRQ_CFC_EJECT)].icucr = PLD_ICUCR_IEN|PLD_ICUCR_ISMOD02; /* 'H' edge sense */
disable_opsput_pld_irq(PLD_IRQ_CFC_EJECT);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册