提交 1e40bcfa 编写于 作者: L Luis R. Rodriguez 提交者: John W. Linville

ath9k: distinguish between device initialization and ath_softc init

We re-label the device driver initialization routines from the
ath_softc, the "Software Carrier" fillers. This should make it
clearer what each of these do.
Signed-off-by: NLuis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 f637cfd6
......@@ -119,7 +119,7 @@ static int ath_ahb_probe(struct platform_device *pdev)
sc->bus_ops = &ath_ahb_bus_ops;
sc->irq = irq;
ret = ath_attach(AR5416_AR9100_DEVID, sc);
ret = ath_init_device(AR5416_AR9100_DEVID, sc);
if (ret != 0) {
dev_err(&pdev->dev, "failed to attach device, err=%d\n", ret);
ret = -ENODEV;
......
......@@ -642,7 +642,7 @@ extern struct ieee80211_ops ath9k_ops;
irqreturn_t ath_isr(int irq, void *dev);
void ath_cleanup(struct ath_softc *sc);
int ath_attach(u16 devid, struct ath_softc *sc);
int ath_init_device(u16 devid, struct ath_softc *sc);
void ath_detach(struct ath_softc *sc);
const char *ath_mac_bb_name(u32 mac_bb_version);
const char *ath_rf_name(u16 rf_version);
......
......@@ -1292,7 +1292,13 @@ static int ath9k_reg_notifier(struct wiphy *wiphy,
return ath_reg_notifier_apply(wiphy, request, reg);
}
static int ath_init(u16 devid, struct ath_softc *sc)
/*
* Initialize and fill ath_softc, ath_sofct is the
* "Software Carrier" struct. Historically it has existed
* to allow the separation between hardware specific
* variables (now in ath_hw) and driver specific variables.
*/
static int ath_init_softc(u16 devid, struct ath_softc *sc)
{
struct ath_hw *ah = NULL;
int r = 0, i;
......@@ -1558,7 +1564,8 @@ void ath_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
&sc->sbands[IEEE80211_BAND_5GHZ];
}
int ath_attach(u16 devid, struct ath_softc *sc)
/* Device driver core initialization */
int ath_init_device(u16 devid, struct ath_softc *sc)
{
struct ieee80211_hw *hw = sc->hw;
int error = 0, i;
......@@ -1566,7 +1573,7 @@ int ath_attach(u16 devid, struct ath_softc *sc)
DPRINTF(sc, ATH_DBG_CONFIG, "Attach ATH hw\n");
error = ath_init(devid, sc);
error = ath_init_softc(devid, sc);
if (error != 0)
return error;
......
......@@ -178,7 +178,7 @@ static int ath_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
sc->mem = mem;
sc->bus_ops = &ath_pci_bus_ops;
if (ath_attach(id->device, sc) != 0) {
if (ath_init_device(id->device, sc) != 0) {
ret = -ENODEV;
goto bad3;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册