提交 1ce368ff 编写于 作者: T Tilman Schmidt 提交者: David S. Miller

isdn/gigaset: encode HLC and BC together

Adapt to buggy device firmware which accepts setting HLC only in the
same command line as BC, by encoding HLC and BC in a single command
if both are specified, and rejecting HLC without BC.

Impact: bugfix
Signed-off-by: NTilman Schmidt <tilman@imap.cc>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 23b36778
......@@ -1166,7 +1166,7 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
char **commands;
char *s;
u8 *pp;
int i, l;
int i, l, lbc, lhlc;
u16 info;
/* decode message */
......@@ -1293,42 +1293,59 @@ static void do_connect_req(struct gigaset_capi_ctr *iif,
goto error;
}
/* check/encode parameter: BC */
if (cmsg->BC && cmsg->BC[0]) {
/* explicit BC overrides CIP */
l = 2*cmsg->BC[0] + 7;
/*
* check/encode parameters: BC & HLC
* must be encoded together as device doesn't accept HLC separately
* explicit parameters override values derived from CIP
*/
/* determine lengths */
if (cmsg->BC && cmsg->BC[0]) /* BC specified explicitly */
lbc = 2*cmsg->BC[0];
else if (cip2bchlc[cmsg->CIPValue].bc) /* BC derived from CIP */
lbc = strlen(cip2bchlc[cmsg->CIPValue].bc);
else /* no BC */
lbc = 0;
if (cmsg->HLC && cmsg->HLC[0]) /* HLC specified explicitly */
lhlc = 2*cmsg->HLC[0];
else if (cip2bchlc[cmsg->CIPValue].hlc) /* HLC derived from CIP */
lhlc = strlen(cip2bchlc[cmsg->CIPValue].hlc);
else /* no HLC */
lhlc = 0;
if (lbc) {
/* have BC: allocate and assemble command string */
l = lbc + 7; /* "^SBC=" + value + "\r" + null byte */
if (lhlc)
l += lhlc + 7; /* ";^SHLC=" + value */
commands[AT_BC] = kmalloc(l, GFP_KERNEL);
if (!commands[AT_BC])
goto oom;
strcpy(commands[AT_BC], "^SBC=");
decode_ie(cmsg->BC, commands[AT_BC]+5);
if (cmsg->BC && cmsg->BC[0]) /* BC specified explicitly */
decode_ie(cmsg->BC, commands[AT_BC] + 5);
else /* BC derived from CIP */
strcpy(commands[AT_BC] + 5,
cip2bchlc[cmsg->CIPValue].bc);
if (lhlc) {
strcpy(commands[AT_BC] + lbc + 5, ";^SHLC=");
if (cmsg->HLC && cmsg->HLC[0])
/* HLC specified explicitly */
decode_ie(cmsg->HLC,
commands[AT_BC] + lbc + 12);
else /* HLC derived from CIP */
strcpy(commands[AT_BC] + lbc + 12,
cip2bchlc[cmsg->CIPValue].hlc);
}
strcpy(commands[AT_BC] + l - 2, "\r");
} else if (cip2bchlc[cmsg->CIPValue].bc) {
l = strlen(cip2bchlc[cmsg->CIPValue].bc) + 7;
commands[AT_BC] = kmalloc(l, GFP_KERNEL);
if (!commands[AT_BC])
goto oom;
snprintf(commands[AT_BC], l, "^SBC=%s\r",
cip2bchlc[cmsg->CIPValue].bc);
}
/* check/encode parameter: HLC */
if (cmsg->HLC && cmsg->HLC[0]) {
/* explicit HLC overrides CIP */
l = 2*cmsg->HLC[0] + 7;
commands[AT_HLC] = kmalloc(l, GFP_KERNEL);
if (!commands[AT_HLC])
goto oom;
strcpy(commands[AT_HLC], "^SHLC=");
decode_ie(cmsg->HLC, commands[AT_HLC]+5);
strcpy(commands[AT_HLC] + l - 2, "\r");
} else if (cip2bchlc[cmsg->CIPValue].hlc) {
l = strlen(cip2bchlc[cmsg->CIPValue].hlc) + 7;
commands[AT_HLC] = kmalloc(l, GFP_KERNEL);
if (!commands[AT_HLC])
goto oom;
snprintf(commands[AT_HLC], l, "^SHLC=%s\r",
cip2bchlc[cmsg->CIPValue].hlc);
} else {
/* no BC */
if (lhlc) {
dev_notice(cs->dev, "%s: cannot set HLC without BC\n",
"CONNECT_REQ");
info = CapiIllMessageParmCoding; /* ? */
goto error;
}
}
/* check/encode parameter: B Protocol */
......
......@@ -282,9 +282,7 @@ struct reply_t gigaset_tab_cid[] =
/* dial */
{EV_DIAL, -1, -1, -1, -1, -1, {ACT_DIAL} },
{RSP_INIT, 0, 0, SEQ_DIAL, 601, 5, {ACT_CMD+AT_BC} },
{RSP_OK, 601, 601, -1, 602, 5, {ACT_CMD+AT_HLC} },
{RSP_NULL, 602, 602, -1, 603, 5, {ACT_CMD+AT_PROTO} },
{RSP_OK, 602, 602, -1, 603, 5, {ACT_CMD+AT_PROTO} },
{RSP_OK, 601, 601, -1, 603, 5, {ACT_CMD+AT_PROTO} },
{RSP_OK, 603, 603, -1, 604, 5, {ACT_CMD+AT_TYPE} },
{RSP_OK, 604, 604, -1, 605, 5, {ACT_CMD+AT_MSN} },
{RSP_NULL, 605, 605, -1, 606, 5, {ACT_CMD+AT_CLIP} },
......
......@@ -186,10 +186,9 @@ void gigaset_dbg_buffer(enum debuglevel level, const unsigned char *msg,
#define AT_BC 3
#define AT_PROTO 4
#define AT_TYPE 5
#define AT_HLC 6
#define AT_CLIP 7
#define AT_CLIP 6
/* total number */
#define AT_NUM 8
#define AT_NUM 7
/* variables in struct at_state_t */
#define VAR_ZSAU 0
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册