提交 18cb652a 编写于 作者: A Alexander Duyck 提交者: Jeff Kirsher

ixgbe: Clean-up page reuse code

This patch cleans up the page reuse code getting it into a state where all
the workarounds needed are in place as well as cleaning up a few minor
oversights such as using __free_pages instead of put_page to drop a locally
allocated page.

It also cleans up how we clear the descriptor status bits.  Previously they
were zeroed as a part of clearing the hdr_addr.  However the hdr_addr is a
64 bit field and 64 bit writes can be a bit more expensive on on 32 bit
systems.  Since we are no longer using the header split feature the upper
32 bits of the address no longer need to be cleared.  As a result we can
just clear the status bits and leave the length and VLAN fields as-is which
should provide more information in debugging.

Cc: Don Skidmore <donald.c.skidmore@intel.com>
Signed-off-by: NAlexander Duyck <alexander.h.duyck@redhat.com>
Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
上级 d8febb77
......@@ -1436,20 +1436,17 @@ static bool ixgbe_alloc_mapped_page(struct ixgbe_ring *rx_ring,
struct ixgbe_rx_buffer *bi)
{
struct page *page = bi->page;
dma_addr_t dma = bi->dma;
dma_addr_t dma;
/* since we are recycling buffers we should seldom need to alloc */
if (likely(dma))
if (likely(page))
return true;
/* alloc new page for storage */
if (likely(!page)) {
page = dev_alloc_pages(ixgbe_rx_pg_order(rx_ring));
if (unlikely(!page)) {
rx_ring->rx_stats.alloc_rx_page_failed++;
return false;
}
bi->page = page;
page = dev_alloc_pages(ixgbe_rx_pg_order(rx_ring));
if (unlikely(!page)) {
rx_ring->rx_stats.alloc_rx_page_failed++;
return false;
}
/* map page for use */
......@@ -1462,13 +1459,13 @@ static bool ixgbe_alloc_mapped_page(struct ixgbe_ring *rx_ring,
*/
if (dma_mapping_error(rx_ring->dev, dma)) {
__free_pages(page, ixgbe_rx_pg_order(rx_ring));
bi->page = NULL;
rx_ring->rx_stats.alloc_rx_page_failed++;
return false;
}
bi->dma = dma;
bi->page = page;
bi->page_offset = 0;
return true;
......@@ -1512,8 +1509,8 @@ void ixgbe_alloc_rx_buffers(struct ixgbe_ring *rx_ring, u16 cleaned_count)
i -= rx_ring->count;
}
/* clear the hdr_addr for the next_to_use descriptor */
rx_desc->read.hdr_addr = 0;
/* clear the status bits for the next_to_use descriptor */
rx_desc->wb.upper.status_error = 0;
cleaned_count--;
} while (cleaned_count);
......@@ -1798,9 +1795,7 @@ static void ixgbe_reuse_rx_page(struct ixgbe_ring *rx_ring,
rx_ring->next_to_alloc = (nta < rx_ring->count) ? nta : 0;
/* transfer page from old buffer to new buffer */
new_buff->page = old_buff->page;
new_buff->dma = old_buff->dma;
new_buff->page_offset = old_buff->page_offset;
*new_buff = *old_buff;
/* sync the buffer for use by the device */
dma_sync_single_range_for_device(rx_ring->dev, new_buff->dma,
......@@ -1809,6 +1804,11 @@ static void ixgbe_reuse_rx_page(struct ixgbe_ring *rx_ring,
DMA_FROM_DEVICE);
}
static inline bool ixgbe_page_is_reserved(struct page *page)
{
return (page_to_nid(page) != numa_mem_id()) || page->pfmemalloc;
}
/**
* ixgbe_add_rx_frag - Add contents of Rx buffer to sk_buff
* @rx_ring: rx descriptor ring to transact packets on
......@@ -1844,12 +1844,12 @@ static bool ixgbe_add_rx_frag(struct ixgbe_ring *rx_ring,
memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
/* we can reuse buffer as-is, just make sure it is local */
if (likely(page_to_nid(page) == numa_node_id()))
/* page is not reserved, we can reuse buffer as-is */
if (likely(!ixgbe_page_is_reserved(page)))
return true;
/* this page cannot be reused so discard it */
put_page(page);
__free_pages(page, ixgbe_rx_pg_order(rx_ring));
return false;
}
......@@ -1857,7 +1857,7 @@ static bool ixgbe_add_rx_frag(struct ixgbe_ring *rx_ring,
rx_buffer->page_offset, size, truesize);
/* avoid re-using remote pages */
if (unlikely(page_to_nid(page) != numa_node_id()))
if (unlikely(ixgbe_page_is_reserved(page)))
return false;
#if (PAGE_SIZE < 8192)
......@@ -1867,22 +1867,19 @@ static bool ixgbe_add_rx_frag(struct ixgbe_ring *rx_ring,
/* flip page offset to other buffer */
rx_buffer->page_offset ^= truesize;
/* Even if we own the page, we are not allowed to use atomic_set()
* This would break get_page_unless_zero() users.
*/
atomic_inc(&page->_count);
#else
/* move offset up to the next cache line */
rx_buffer->page_offset += truesize;
if (rx_buffer->page_offset > last_offset)
return false;
/* bump ref count on page before it is given to the stack */
get_page(page);
#endif
/* Even if we own the page, we are not allowed to use atomic_set()
* This would break get_page_unless_zero() users.
*/
atomic_inc(&page->_count);
return true;
}
......@@ -1945,6 +1942,8 @@ static struct sk_buff *ixgbe_fetch_rx_buffer(struct ixgbe_ring *rx_ring,
rx_buffer->page_offset,
ixgbe_rx_bufsz(rx_ring),
DMA_FROM_DEVICE);
rx_buffer->skb = NULL;
}
/* pull page into skb */
......@@ -1962,8 +1961,6 @@ static struct sk_buff *ixgbe_fetch_rx_buffer(struct ixgbe_ring *rx_ring,
}
/* clear contents of buffer_info */
rx_buffer->skb = NULL;
rx_buffer->dma = 0;
rx_buffer->page = NULL;
return skb;
......@@ -4344,29 +4341,26 @@ static void ixgbe_clean_rx_ring(struct ixgbe_ring *rx_ring)
/* Free all the Rx ring sk_buffs */
for (i = 0; i < rx_ring->count; i++) {
struct ixgbe_rx_buffer *rx_buffer;
struct ixgbe_rx_buffer *rx_buffer = &rx_ring->rx_buffer_info[i];
rx_buffer = &rx_ring->rx_buffer_info[i];
if (rx_buffer->skb) {
struct sk_buff *skb = rx_buffer->skb;
if (IXGBE_CB(skb)->page_released) {
if (IXGBE_CB(skb)->page_released)
dma_unmap_page(dev,
IXGBE_CB(skb)->dma,
ixgbe_rx_bufsz(rx_ring),
DMA_FROM_DEVICE);
IXGBE_CB(skb)->page_released = false;
}
dev_kfree_skb(skb);
rx_buffer->skb = NULL;
}
if (rx_buffer->dma)
dma_unmap_page(dev, rx_buffer->dma,
ixgbe_rx_pg_size(rx_ring),
DMA_FROM_DEVICE);
rx_buffer->dma = 0;
if (rx_buffer->page)
__free_pages(rx_buffer->page,
ixgbe_rx_pg_order(rx_ring));
if (!rx_buffer->page)
continue;
dma_unmap_page(dev, rx_buffer->dma,
ixgbe_rx_pg_size(rx_ring), DMA_FROM_DEVICE);
__free_pages(rx_buffer->page, ixgbe_rx_pg_order(rx_ring));
rx_buffer->page = NULL;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册