提交 140b7552 编写于 作者: P Patrice Vilchez 提交者: David S. Miller

net/macb: Add support for Gigabit Ethernet mode

Add Gigabit Ethernet mode to GEM cadence IP and enable RGMII connection.
Signed-off-by: NPatrice Vilchez <patrice.vilchez@atmel.com>
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: NJoachim Eastwood <manabian@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 65f8f9a1
......@@ -152,13 +152,17 @@ static void macb_handle_link_change(struct net_device *dev)
reg = macb_readl(bp, NCFGR);
reg &= ~(MACB_BIT(SPD) | MACB_BIT(FD));
if (macb_is_gem(bp))
reg &= ~GEM_BIT(GBE);
if (phydev->duplex)
reg |= MACB_BIT(FD);
if (phydev->speed == SPEED_100)
reg |= MACB_BIT(SPD);
if (phydev->speed == SPEED_1000)
reg |= GEM_BIT(GBE);
macb_writel(bp, NCFGR, reg);
macb_or_gem_writel(bp, NCFGR, reg);
bp->speed = phydev->speed;
bp->duplex = phydev->duplex;
......@@ -216,7 +220,10 @@ static int macb_mii_probe(struct net_device *dev)
}
/* mask with MAC supported features */
phydev->supported &= PHY_BASIC_FEATURES;
if (macb_is_gem(bp))
phydev->supported &= PHY_GBIT_FEATURES;
else
phydev->supported &= PHY_BASIC_FEATURES;
phydev->advertising = phydev->supported;
......@@ -1388,7 +1395,9 @@ static int __init macb_probe(struct platform_device *pdev)
bp->phy_interface = err;
}
if (bp->phy_interface == PHY_INTERFACE_MODE_RMII)
if (bp->phy_interface == PHY_INTERFACE_MODE_RGMII)
macb_or_gem_writel(bp, USRIO, GEM_BIT(RGMII));
else if (bp->phy_interface == PHY_INTERFACE_MODE_RMII)
#if defined(CONFIG_ARCH_AT91)
macb_or_gem_writel(bp, USRIO, (MACB_BIT(RMII) |
MACB_BIT(CLKEN)));
......
......@@ -149,6 +149,8 @@
#define MACB_IRXFCS_SIZE 1
/* GEM specific NCFGR bitfields. */
#define GEM_GBE_OFFSET 10
#define GEM_GBE_SIZE 1
#define GEM_CLK_OFFSET 18
#define GEM_CLK_SIZE 3
#define GEM_DBW_OFFSET 21
......@@ -252,6 +254,8 @@
/* Bitfields in USRIO (AT91) */
#define MACB_RMII_OFFSET 0
#define MACB_RMII_SIZE 1
#define GEM_RGMII_OFFSET 0 /* GEM gigabit mode */
#define GEM_RGMII_SIZE 1
#define MACB_CLKEN_OFFSET 1
#define MACB_CLKEN_SIZE 1
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册