提交 11f15ed3 编写于 作者: M Michael Chan 提交者: David S. Miller

bnxt_en: Update to Firmware 1.2.2 spec.

Use new field names in API structs and stop using deprecated fields
auto_link_speed and auto_duplex in phy_cfg/phy_qcfg structs.

Update copyright year to 2016.
Signed-off-by: NMichael Chan <michael.chan@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 04c85bfb
/* Broadcom NetXtreme-C/E network driver.
*
* Copyright (c) 2014-2015 Broadcom Corporation
* Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -2763,7 +2763,7 @@ static int bnxt_hwrm_func_drv_rgtr(struct bnxt *bp)
* only checks if it is non-zero to enable async event forwarding
*/
req.async_event_fwd[0] |= cpu_to_le32(1);
req.os_type = cpu_to_le16(1);
req.os_type = cpu_to_le16(FUNC_DRV_RGTR_REQ_OS_TYPE_LINUX);
req.ver_maj = DRV_VER_MAJ;
req.ver_min = DRV_VER_MIN;
req.ver_upd = DRV_VER_UPD;
......@@ -3726,7 +3726,7 @@ int bnxt_hwrm_func_qcaps(struct bnxt *bp)
pf->fw_fid = le16_to_cpu(resp->fid);
pf->port_id = le16_to_cpu(resp->port_id);
memcpy(pf->mac_addr, resp->perm_mac_address, ETH_ALEN);
memcpy(pf->mac_addr, resp->mac_address, ETH_ALEN);
memcpy(bp->dev->dev_addr, pf->mac_addr, ETH_ALEN);
pf->max_rsscos_ctxs = le16_to_cpu(resp->max_rsscos_ctx);
pf->max_cp_rings = le16_to_cpu(resp->max_cmpl_rings);
......@@ -3751,7 +3751,7 @@ int bnxt_hwrm_func_qcaps(struct bnxt *bp)
struct bnxt_vf_info *vf = &bp->vf;
vf->fw_fid = le16_to_cpu(resp->fid);
memcpy(vf->mac_addr, resp->perm_mac_address, ETH_ALEN);
memcpy(vf->mac_addr, resp->mac_address, ETH_ALEN);
if (is_valid_ether_addr(vf->mac_addr))
/* overwrite netdev dev_adr with admin VF MAC */
memcpy(bp->dev->dev_addr, vf->mac_addr, ETH_ALEN);
......@@ -3842,6 +3842,8 @@ static int bnxt_hwrm_ver_get(struct bnxt *bp)
memcpy(&bp->ver_resp, resp, sizeof(struct hwrm_ver_get_output));
bp->hwrm_spec_code = resp->hwrm_intf_maj << 16 |
resp->hwrm_intf_min << 8 | resp->hwrm_intf_upd;
if (resp->hwrm_intf_maj < 1) {
netdev_warn(bp->dev, "HWRM interface %d.%d.%d is older than 1.0.0.\n",
resp->hwrm_intf_maj, resp->hwrm_intf_min,
......@@ -4523,7 +4525,6 @@ static int bnxt_update_link(struct bnxt *bp, bool chng_link_state)
else
link_info->link_speed = 0;
link_info->force_link_speed = le16_to_cpu(resp->force_link_speed);
link_info->auto_link_speed = le16_to_cpu(resp->auto_link_speed);
link_info->support_speeds = le16_to_cpu(resp->support_speeds);
link_info->auto_link_speeds = le16_to_cpu(resp->auto_link_speed_mask);
link_info->lp_auto_link_speeds =
......@@ -4533,8 +4534,8 @@ static int bnxt_update_link(struct bnxt *bp, bool chng_link_state)
link_info->phy_ver[1] = resp->phy_min;
link_info->phy_ver[2] = resp->phy_bld;
link_info->media_type = resp->media_type;
link_info->transceiver = resp->transceiver_type;
link_info->phy_addr = resp->phy_addr;
link_info->transceiver = resp->xcvr_pkg_type;
link_info->phy_addr = resp->eee_config_phy_addr;
/* TODO: need to add more logic to report VF link */
if (chng_link_state) {
......@@ -4581,7 +4582,7 @@ static void bnxt_hwrm_set_link_common(struct bnxt *bp,
if (autoneg & BNXT_AUTONEG_SPEED) {
req->auto_mode |=
PORT_PHY_CFG_REQ_AUTO_MODE_MASK;
PORT_PHY_CFG_REQ_AUTO_MODE_SPEED_MASK;
req->enables |= cpu_to_le32(
PORT_PHY_CFG_REQ_ENABLES_AUTO_LINK_SPEED_MASK);
......@@ -4595,9 +4596,6 @@ static void bnxt_hwrm_set_link_common(struct bnxt *bp,
req->flags |= cpu_to_le32(PORT_PHY_CFG_REQ_FLAGS_FORCE);
}
/* currently don't support half duplex */
req->auto_duplex = PORT_PHY_CFG_REQ_AUTO_DUPLEX_FULL;
req->enables |= cpu_to_le32(PORT_PHY_CFG_REQ_ENABLES_AUTO_DUPLEX);
/* tell chimp that the setting takes effect immediately */
req->flags |= cpu_to_le32(PORT_PHY_CFG_REQ_FLAGS_RESET_PHY);
}
......
/* Broadcom NetXtreme-C/E network driver.
*
* Copyright (c) 2014-2015 Broadcom Corporation
* Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -11,7 +11,7 @@
#define BNXT_H
#define DRV_MODULE_NAME "bnxt_en"
#define DRV_MODULE_VERSION "1.0.0"
#define DRV_MODULE_VERSION "1.2.0"
#define DRV_VER_MAJ 1
#define DRV_VER_MIN 0
......@@ -788,7 +788,7 @@ struct bnxt_link_info {
#define BNXT_LINK_AUTO_ALLSPDS PORT_PHY_QCFG_RESP_AUTO_MODE_ALL_SPEEDS
#define BNXT_LINK_AUTO_ONESPD PORT_PHY_QCFG_RESP_AUTO_MODE_ONE_SPEED
#define BNXT_LINK_AUTO_ONEORBELOW PORT_PHY_QCFG_RESP_AUTO_MODE_ONE_OR_BELOW
#define BNXT_LINK_AUTO_MSK PORT_PHY_QCFG_RESP_AUTO_MODE_MASK
#define BNXT_LINK_AUTO_MSK PORT_PHY_QCFG_RESP_AUTO_MODE_SPEED_MASK
#define PHY_VER_LEN 3
u8 phy_ver[PHY_VER_LEN];
u16 link_speed;
......@@ -813,7 +813,6 @@ struct bnxt_link_info {
#define BNXT_LINK_SPEED_MSK_40GB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_40GB
#define BNXT_LINK_SPEED_MSK_50GB PORT_PHY_QCFG_RESP_SUPPORT_SPEEDS_50GB
u16 lp_auto_link_speeds;
u16 auto_link_speed;
u16 force_link_speed;
u32 preemphasis;
......@@ -940,6 +939,7 @@ struct bnxt {
u32 msg_enable;
u32 hwrm_spec_code;
u16 hwrm_cmd_seq;
u32 hwrm_intr_seq_id;
void *hwrm_cmd_resp_addr;
......
/* Broadcom NetXtreme-C/E network driver.
*
* Copyright (c) 2014-2015 Broadcom Corporation
* Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -728,7 +728,7 @@ static int bnxt_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
ethtool_speed = bnxt_fw_to_ethtool_speed(link_info->link_speed);
ethtool_cmd_speed_set(cmd, ethtool_speed);
if (link_info->transceiver ==
PORT_PHY_QCFG_RESP_TRANSCEIVER_TYPE_XCVR_INTERNAL)
PORT_PHY_QCFG_RESP_XCVR_PKG_TYPE_XCVR_INTERNAL)
cmd->transceiver = XCVR_INTERNAL;
else
cmd->transceiver = XCVR_EXTERNAL;
......
/* Broadcom NetXtreme-C/E network driver.
*
* Copyright (c) 2014-2015 Broadcom Corporation
* Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......
/* Broadcom NetXtreme-C/E network driver.
*
* Copyright (c) 2014-2015 Broadcom Corporation
* Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......
/* Broadcom NetXtreme-C/E network driver.
*
* Copyright (c) 2014-2015 Broadcom Corporation
* Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......
/* Broadcom NetXtreme-C/E network driver.
*
* Copyright (c) 2014-2015 Broadcom Corporation
* Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......@@ -771,12 +771,8 @@ static int bnxt_vf_set_link(struct bnxt *bp, struct bnxt_vf_info *vf)
PORT_PHY_QCFG_RESP_LINK_NO_LINK) {
phy_qcfg_resp.link =
PORT_PHY_QCFG_RESP_LINK_LINK;
if (phy_qcfg_resp.auto_link_speed)
phy_qcfg_resp.link_speed =
phy_qcfg_resp.auto_link_speed;
else
phy_qcfg_resp.link_speed =
phy_qcfg_resp.force_link_speed;
phy_qcfg_resp.link_speed = cpu_to_le16(
PORT_PHY_QCFG_RESP_LINK_SPEED_10GB);
phy_qcfg_resp.duplex =
PORT_PHY_QCFG_RESP_DUPLEX_FULL;
phy_qcfg_resp.pause =
......@@ -859,8 +855,8 @@ void bnxt_update_vf_mac(struct bnxt *bp)
* default but the stored zero MAC will allow the VF user to change
* the random MAC address using ndo_set_mac_address() if he wants.
*/
if (!ether_addr_equal(resp->perm_mac_address, bp->vf.mac_addr))
memcpy(bp->vf.mac_addr, resp->perm_mac_address, ETH_ALEN);
if (!ether_addr_equal(resp->mac_address, bp->vf.mac_addr))
memcpy(bp->vf.mac_addr, resp->mac_address, ETH_ALEN);
/* overwrite netdev dev_addr with admin VF MAC */
if (is_valid_ether_addr(bp->vf.mac_addr))
......
/* Broadcom NetXtreme-C/E network driver.
*
* Copyright (c) 2014-2015 Broadcom Corporation
* Copyright (c) 2014-2016 Broadcom Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册