usb/isp1760: Move isp1760_run within file (prepare for next patch)

Like the previous patch, this patch has been split from the next one
for clarity.
Signed-off-by: NArvid Brodin <arvid.brodin@enea.com>
Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

drivers/usb/host/isp1760-hcd.c

@@ -514,74 +514,6 @@ static int isp1760_hc_setup(struct usb_hcd *hcd)
 	return priv_init(hcd);
 }
 
-static int isp1760_run(struct usb_hcd *hcd)
-{
-	int retval;
-	u32 temp;
-	u32 command;
-	u32 chipid;
-
-	hcd->uses_new_polling = 1;
-
-	hcd->state = HC_STATE_RUNNING;
-
-	/* Set PTD interrupt AND & OR maps */
-	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0);
-	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0);
-	reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0);
-	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff);
-	/* step 23 passed */
-
-	temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
-	reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN);
-
-	command = reg_read32(hcd->regs, HC_USBCMD);
-	command &= ~(CMD_LRESET|CMD_RESET);
-	command |= CMD_RUN;
-	reg_write32(hcd->regs, HC_USBCMD, command);
-
-	retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000);
-	if (retval)
-		return retval;
-
-	/*
-	 * XXX
-	 * Spec says to write FLAG_CF as last config action, priv code grabs
-	 * the semaphore while doing so.
-	 */
-	down_write(&ehci_cf_port_reset_rwsem);
-	reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF);
-
-	retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000);
-	up_write(&ehci_cf_port_reset_rwsem);
-	if (retval)
-		return retval;
-
-	chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG);
-	dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n",
-					chipid & 0xffff, chipid >> 16);
-
-	/* PTD Register Init Part 2, Step 28 */
-
-	/* Setup registers controlling PTD checking */
-	reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000);
-	reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000);
-	reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001);
-	reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff);
-	reg_write32(hcd->regs, HC_BUFFER_STATUS_REG,
-						ATL_BUF_FILL | INT_BUF_FILL);
-
-	/* GRR this is run-once init(), being done every time the HC starts.
-	 * So long as they're part of class devices, we can't do it init()
-	 * since the class device isn't created that early.
-	 */
-	return 0;
-}
-
 static u32 base_to_chip(u32 base)
 {
 	return ((base - 0x400) >> 3);
@@ -1326,6 +1258,74 @@ static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
 	return irqret;
 }
 
+static int isp1760_run(struct usb_hcd *hcd)
+{
+	int retval;
+	u32 temp;
+	u32 command;
+	u32 chipid;
+
+	hcd->uses_new_polling = 1;
+
+	hcd->state = HC_STATE_RUNNING;
+
+	/* Set PTD interrupt AND & OR maps */
+	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0);
+	reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0);
+	reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0);
+	reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff);
+	/* step 23 passed */
+
+	temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL);
+	reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN);
+
+	command = reg_read32(hcd->regs, HC_USBCMD);
+	command &= ~(CMD_LRESET|CMD_RESET);
+	command |= CMD_RUN;
+	reg_write32(hcd->regs, HC_USBCMD, command);
+
+	retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000);
+	if (retval)
+		return retval;
+
+	/*
+	 * XXX
+	 * Spec says to write FLAG_CF as last config action, priv code grabs
+	 * the semaphore while doing so.
+	 */
+	down_write(&ehci_cf_port_reset_rwsem);
+	reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF);
+
+	retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000);
+	up_write(&ehci_cf_port_reset_rwsem);
+	if (retval)
+		return retval;
+
+	chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG);
+	dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n",
+					chipid & 0xffff, chipid >> 16);
+
+	/* PTD Register Init Part 2, Step 28 */
+
+	/* Setup registers controlling PTD checking */
+	reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000);
+	reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000);
+	reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001);
+	reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff);
+	reg_write32(hcd->regs, HC_BUFFER_STATUS_REG,
+						ATL_BUF_FILL | INT_BUF_FILL);
+
+	/* GRR this is run-once init(), being done every time the HC starts.
+	 * So long as they're part of class devices, we can't do it init()
+	 * since the class device isn't created that early.
+	 */
+	return 0;
+}
+
 static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len)
 {
 	qtd->data_buffer = databuffer;