提交 099b40b7 编写于 作者: R Ron Rindjunsky 提交者: John W. Linville

iwlwifi: expanding HW parameters control

This patch adds several parameters to priv.hw_params, for better control
over HW capabilities variants
Signed-off-by: NRon Rindjunsky <ron.rindjunsky@intel.com>
Signed-off-by: NTomas Winkler <tomas.winkler@intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
上级 073d3f5f
......@@ -134,10 +134,8 @@
#define RTC_DATA_LOWER_BOUND (0x800000)
#define IWL49_RTC_DATA_UPPER_BOUND (0x80A000)
#define IWL49_RTC_INST_SIZE \
(IWL49_RTC_INST_UPPER_BOUND - RTC_INST_LOWER_BOUND)
#define IWL49_RTC_DATA_SIZE \
(IWL49_RTC_DATA_UPPER_BOUND - RTC_DATA_LOWER_BOUND)
#define IWL49_RTC_INST_SIZE (IWL49_RTC_INST_UPPER_BOUND - RTC_INST_LOWER_BOUND)
#define IWL49_RTC_DATA_SIZE (IWL49_RTC_DATA_UPPER_BOUND - RTC_DATA_LOWER_BOUND)
#define IWL_MAX_INST_SIZE IWL49_RTC_INST_SIZE
#define IWL_MAX_DATA_SIZE IWL49_RTC_DATA_SIZE
......
......@@ -999,7 +999,8 @@ void iwl4965_rf_kill_ct_config(struct iwl_priv *priv)
temp_th = CELSIUS_TO_KELVIN(TM_CT_KILL_THRESHOLD);
crit_temperature = ((temp_th * (R3-R1))/CT_LIMIT_CONST) + R2;
cmd.critical_temperature_R = cpu_to_le32(crit_temperature);
cmd.critical_temperature_R =
cpu_to_le32(priv->hw_params.ct_kill_threshold);
ret = iwl_send_cmd_pdu(priv, REPLY_CT_KILL_CONFIG_CMD,
sizeof(cmd), &cmd);
if (ret)
......@@ -1340,6 +1341,7 @@ int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
}
priv->hw_params.max_txq_num = priv->cfg->mod_params->num_of_queues;
priv->hw_params.sw_crypto = priv->cfg->mod_params->sw_crypto;
priv->hw_params.tx_cmd_len = sizeof(struct iwl4965_tx_cmd);
priv->hw_params.max_rxq_size = RX_QUEUE_SIZE;
priv->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
......@@ -1351,10 +1353,17 @@ int iwl4965_hw_set_hw_params(struct iwl_priv *priv)
priv->hw_params.max_stations = IWL4965_STATION_COUNT;
priv->hw_params.bcast_sta_id = IWL4965_BROADCAST_ID;
priv->hw_params.max_data_size = IWL49_RTC_DATA_SIZE;
priv->hw_params.max_inst_size = IWL49_RTC_INST_SIZE;
priv->hw_params.max_bsm_size = BSM_SRAM_SIZE;
priv->hw_params.fat_channel = BIT(IEEE80211_BAND_5GHZ);
priv->hw_params.tx_chains_num = 2;
priv->hw_params.rx_chains_num = 2;
priv->hw_params.valid_tx_ant = (IWL_ANTENNA_MAIN | IWL_ANTENNA_AUX);
priv->hw_params.valid_rx_ant = (IWL_ANTENNA_MAIN | IWL_ANTENNA_AUX);
priv->hw_params.ct_kill_threshold = CELSIUS_TO_KELVIN(CT_KILL_THRESHOLD);
#ifdef CONFIG_IWL4965_RUN_TIME_CALIB
priv->hw_params.sens = &iwl4965_sensitivity;
#endif
......@@ -3064,7 +3073,7 @@ static void iwl4965_handle_data_packet(struct iwl_priv *priv, int is_data,
hdr = (struct ieee80211_hdr *)rxb->skb->data;
/* in case of HW accelerated crypto and bad decryption, drop */
if (!priv->cfg->mod_params->sw_crypto &&
if (!priv->hw_params.sw_crypto &&
iwl4965_set_decrypted_flag(priv, hdr, ampdu_status, stats))
return;
......@@ -3122,7 +3131,7 @@ void iwl4965_init_ht_hw_capab(struct iwl_priv *priv,
ht_info->ht_supported = 1;
if (band == IEEE80211_BAND_5GHZ) {
if (priv->hw_params.fat_channel & BIT(band)) {
ht_info->cap |= (u16)IEEE80211_HT_CAP_SUP_WIDTH;
ht_info->cap |= (u16)IEEE80211_HT_CAP_SGI_40;
ht_info->supp_mcs_set[4] = 0x01;
......
......@@ -55,6 +55,8 @@ extern struct iwl_cfg iwl4965_agn_cfg;
* This number will also appear in << 8 position of 1st dword of uCode file */
#define IWL4965_UCODE_API "-1"
/* CT-KILL constants */
#define CT_KILL_THRESHOLD 110 /* in Celsius */
/* Default noise level to report when noise measurement is not available.
* This may be because we're:
......@@ -570,16 +572,25 @@ struct iwl_sensitivity_ranges {
u16 auto_corr_min_cck_mrc;
};
#define IWL_FAT_CHANNEL_52 BIT(IEEE80211_BAND_5GHZ)
/**
* struct iwl_hw_params
* @max_txq_num: Max # Tx queues supported
* @tx_cmd_len: Size of Tx command (but not including frame itself)
* @tx_ant_num: Number of TX antennas
* @tx/rx_chains_num: Number of TX/RX chains
* @valid_tx/rx_ant: usable antennas
* @max_rxq_size: Max # Rx frames in Rx queue (must be power-of-2)
* @rx_buffer_size:
* @max_rxq_log: Log-base-2 of max_rxq_size
* @rx_buf_size: Rx buffer size
* @max_stations:
* @bcast_sta_id:
* @fat_channel: is 40MHz width possible in band 2.4
* BIT(IEEE80211_BAND_5GHZ) BIT(IEEE80211_BAND_5GHZ)
* @sw_crypto: 0 for hw, 1 for sw
* @max_xxx_size: for ucode uses
* @ct_kill_threshold: temperature threshold
* @struct iwl_sensitivity_ranges: range of sensitivity values
*/
struct iwl_hw_params {
......@@ -595,13 +606,19 @@ struct iwl_hw_params {
u32 max_pkt_size;
u8 max_stations;
u8 bcast_sta_id;
u8 fat_channel;
u8 sw_crypto;
u32 max_inst_size;
u32 max_data_size;
u32 max_bsm_size;
u32 ct_kill_threshold; /* value in hw-dependent units */
#ifdef CONFIG_IWLWIFI_RUN_TIME_CALIB
const struct iwl_sensitivity_ranges *sens;
#endif
};
#define HT_SHORT_GI_20MHZ_ONLY (1 << 0)
#define HT_SHORT_GI_40MHZ_ONLY (1 << 1)
#define HT_SHORT_GI_20MHZ_ONLY (1 << 0)
#define HT_SHORT_GI_40MHZ_ONLY (1 << 1)
#define IWL_RX_HDR(x) ((struct iwl4965_rx_frame_hdr *)(\
......
......@@ -828,7 +828,7 @@ static int iwl4965_commit_rxon(struct iwl_priv *priv)
le16_to_cpu(priv->staging_rxon.channel),
print_mac(mac, priv->staging_rxon.bssid_addr));
iwl4965_set_rxon_hwcrypto(priv, !priv->cfg->mod_params->sw_crypto);
iwl4965_set_rxon_hwcrypto(priv, !priv->hw_params.sw_crypto);
/* Apply the new configuration */
rc = iwl_send_cmd_pdu(priv, REPLY_RXON,
sizeof(struct iwl4965_rxon_cmd), &priv->staging_rxon);
......@@ -4855,34 +4855,34 @@ static int iwl4965_read_ucode(struct iwl_priv *priv)
}
/* Verify that uCode images will fit in card's SRAM */
if (inst_size > IWL_MAX_INST_SIZE) {
if (inst_size > priv->hw_params.max_inst_size) {
IWL_DEBUG_INFO("uCode instr len %d too large to fit in\n",
inst_size);
ret = -EINVAL;
goto err_release;
}
if (data_size > IWL_MAX_DATA_SIZE) {
if (data_size > priv->hw_params.max_data_size) {
IWL_DEBUG_INFO("uCode data len %d too large to fit in\n",
data_size);
ret = -EINVAL;
goto err_release;
}
if (init_size > IWL_MAX_INST_SIZE) {
if (init_size > priv->hw_params.max_inst_size) {
IWL_DEBUG_INFO
("uCode init instr len %d too large to fit in\n",
init_size);
ret = -EINVAL;
goto err_release;
}
if (init_data_size > IWL_MAX_DATA_SIZE) {
if (init_data_size > priv->hw_params.max_data_size) {
IWL_DEBUG_INFO
("uCode init data len %d too large to fit in\n",
init_data_size);
ret = -EINVAL;
goto err_release;
}
if (boot_size > IWL_MAX_BSM_SIZE) {
if (boot_size > priv->hw_params.max_bsm_size) {
IWL_DEBUG_INFO
("uCode boot instr len %d too large to fit in\n",
boot_size);
......@@ -6606,7 +6606,7 @@ static int iwl4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
IWL_DEBUG_MAC80211("enter\n");
if (priv->cfg->mod_params->sw_crypto) {
if (priv->hw_params.sw_crypto) {
IWL_DEBUG_MAC80211("leave - hwcrypto disabled\n");
return -EOPNOTSUPP;
}
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册