提交 073bb189 编写于 作者: S Saeed Mahameed 提交者: David S. Miller

net/mlx5: Introducing E-Switch and l2 table

E-Switch is the software entity that represents and manages ConnectX4
inter-HCA ethernet l2 switching.

E-Switch has its own Virtual Ports, each Vport/vNIC/VF can be
connected to the device through a vport of an e-switch.

Each e-switch is managed by one vNIC identified by
HCA_CAP.vport_group_manager (usually it is the PF/vport[0]),
and its main responsibility is to forward each packet to the
right vport.

e-Switch needs to manage its own l2-table and FDB tables.

L2 table is a flow table that is managed by FW, it is needed for
Multi-host (Multi PF) configuration for inter HCA switching between
PFs.

FDB table is a flow table that is totally managed by e-Switch driver,
its main responsibility is to switch packets between e-Swtich internal
vports and uplink vport that belong to the same.

This patch introduces only e-Swtich l2 table management, FDB managemnt
will come later when ethernet SRIOV/VFs will be enabled.

preperation for ethernet sriov and l2 table management.
Signed-off-by: NSaeed Mahameed <saeedm@mellanox.com>
Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
上级 aad9e6e4
......@@ -3,6 +3,6 @@ obj-$(CONFIG_MLX5_CORE) += mlx5_core.o
mlx5_core-y := main.o cmd.o debugfs.o fw.o eq.o uar.o pagealloc.o \
health.o mcg.o cq.o srq.o alloc.o qp.o port.o mr.o pd.o \
mad.o transobj.o vport.o sriov.o
mlx5_core-$(CONFIG_MLX5_CORE_EN) += wq.o flow_table.o \
mlx5_core-$(CONFIG_MLX5_CORE_EN) += wq.o flow_table.o eswitch.o \
en_main.o en_flow_table.o en_ethtool.o en_tx.o en_rx.o \
en_txrx.o
......@@ -35,6 +35,9 @@
#include <linux/mlx5/driver.h>
#include <linux/mlx5/cmd.h>
#include "mlx5_core.h"
#ifdef CONFIG_MLX5_CORE_EN
#include "eswitch.h"
#endif
enum {
MLX5_EQE_SIZE = sizeof(struct mlx5_eqe),
......@@ -287,6 +290,11 @@ static int mlx5_eq_int(struct mlx5_core_dev *dev, struct mlx5_eq *eq)
break;
#endif
#ifdef CONFIG_MLX5_CORE_EN
case MLX5_EVENT_TYPE_NIC_VPORT_CHANGE:
mlx5_eswitch_vport_event(dev->priv.eswitch, eqe);
break;
#endif
default:
mlx5_core_warn(dev, "Unhandled event 0x%x on EQ 0x%x\n",
eqe->type, eq->eqn);
......@@ -459,6 +467,11 @@ int mlx5_start_eqs(struct mlx5_core_dev *dev)
if (MLX5_CAP_GEN(dev, pg))
async_event_mask |= (1ull << MLX5_EVENT_TYPE_PAGE_FAULT);
if (MLX5_CAP_GEN(dev, port_type) == MLX5_CAP_PORT_TYPE_ETH &&
MLX5_CAP_GEN(dev, vport_group_manager) &&
mlx5_core_is_pf(dev))
async_event_mask |= (1ull << MLX5_EVENT_TYPE_NIC_VPORT_CHANGE);
err = mlx5_create_map_eq(dev, &table->cmd_eq, MLX5_EQ_VEC_CMD,
MLX5_NUM_CMD_EQE, 1ull << MLX5_EVENT_TYPE_CMD,
"mlx5_cmd_eq", &dev->priv.uuari.uars[0]);
......
/*
* Copyright (c) 2015, Mellanox Technologies. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include <linux/etherdevice.h>
#include <linux/mlx5/driver.h>
#include <linux/mlx5/mlx5_ifc.h>
#include <linux/mlx5/vport.h>
#include "mlx5_core.h"
#include "eswitch.h"
#define MLX5_DEBUG_ESWITCH_MASK BIT(3)
#define esw_info(dev, format, ...) \
pr_info("(%s): E-Switch: " format, (dev)->priv.name, ##__VA_ARGS__)
#define esw_warn(dev, format, ...) \
pr_warn("(%s): E-Switch: " format, (dev)->priv.name, ##__VA_ARGS__)
#define esw_debug(dev, format, ...) \
mlx5_core_dbg_mask(dev, MLX5_DEBUG_ESWITCH_MASK, format, ##__VA_ARGS__)
enum {
MLX5_ACTION_NONE = 0,
MLX5_ACTION_ADD = 1,
MLX5_ACTION_DEL = 2,
};
/* HW UC L2 table hash node */
struct mlx5_uc_l2addr {
struct l2addr_node node;
u8 action;
u32 table_index;
u32 vport;
};
/* Vport UC L2 table hash node */
struct mlx5_vport_addr {
struct l2addr_node node;
u8 action;
};
enum {
UC_ADDR_CHANGE = BIT(0),
MC_ADDR_CHANGE = BIT(1),
};
static int arm_vport_context_events_cmd(struct mlx5_core_dev *dev, int vport,
u32 events_mask)
{
int in[MLX5_ST_SZ_DW(modify_nic_vport_context_in)];
int out[MLX5_ST_SZ_DW(modify_nic_vport_context_out)];
void *nic_vport_ctx;
int err;
memset(out, 0, sizeof(out));
memset(in, 0, sizeof(in));
MLX5_SET(modify_nic_vport_context_in, in,
opcode, MLX5_CMD_OP_MODIFY_NIC_VPORT_CONTEXT);
MLX5_SET(modify_nic_vport_context_in, in, field_select.change_event, 1);
MLX5_SET(modify_nic_vport_context_in, in, vport_number, vport);
if (vport)
MLX5_SET(modify_nic_vport_context_in, in, other_vport, 1);
nic_vport_ctx = MLX5_ADDR_OF(modify_nic_vport_context_in,
in, nic_vport_context);
MLX5_SET(nic_vport_context, nic_vport_ctx, arm_change_event, 1);
if (events_mask & UC_ADDR_CHANGE)
MLX5_SET(nic_vport_context, nic_vport_ctx,
event_on_uc_address_change, 1);
if (events_mask & MC_ADDR_CHANGE)
MLX5_SET(nic_vport_context, nic_vport_ctx,
event_on_mc_address_change, 1);
err = mlx5_cmd_exec(dev, in, sizeof(in), out, sizeof(out));
if (err)
goto ex;
err = mlx5_cmd_status_to_err_v2(out);
if (err)
goto ex;
return 0;
ex:
return err;
}
/* HW L2 Table (MPFS) management */
static int set_l2_table_entry_cmd(struct mlx5_core_dev *dev, u32 index,
u8 *mac, u8 vlan_valid, u16 vlan)
{
u32 in[MLX5_ST_SZ_DW(set_l2_table_entry_in)];
u32 out[MLX5_ST_SZ_DW(set_l2_table_entry_out)];
u8 *in_mac_addr;
memset(in, 0, sizeof(in));
memset(out, 0, sizeof(out));
MLX5_SET(set_l2_table_entry_in, in, opcode,
MLX5_CMD_OP_SET_L2_TABLE_ENTRY);
MLX5_SET(set_l2_table_entry_in, in, table_index, index);
MLX5_SET(set_l2_table_entry_in, in, vlan_valid, vlan_valid);
MLX5_SET(set_l2_table_entry_in, in, vlan, vlan);
in_mac_addr = MLX5_ADDR_OF(set_l2_table_entry_in, in, mac_address);
ether_addr_copy(&in_mac_addr[2], mac);
return mlx5_cmd_exec_check_status(dev, in, sizeof(in),
out, sizeof(out));
}
static int del_l2_table_entry_cmd(struct mlx5_core_dev *dev, u32 index)
{
u32 in[MLX5_ST_SZ_DW(delete_l2_table_entry_in)];
u32 out[MLX5_ST_SZ_DW(delete_l2_table_entry_out)];
memset(in, 0, sizeof(in));
memset(out, 0, sizeof(out));
MLX5_SET(delete_l2_table_entry_in, in, opcode,
MLX5_CMD_OP_DELETE_L2_TABLE_ENTRY);
MLX5_SET(delete_l2_table_entry_in, in, table_index, index);
return mlx5_cmd_exec_check_status(dev, in, sizeof(in),
out, sizeof(out));
}
static int alloc_l2_table_index(struct mlx5_l2_table *l2_table, u32 *ix)
{
int err = 0;
*ix = find_first_zero_bit(l2_table->bitmap, l2_table->size);
if (*ix >= l2_table->size)
err = -ENOSPC;
else
__set_bit(*ix, l2_table->bitmap);
return err;
}
static void free_l2_table_index(struct mlx5_l2_table *l2_table, u32 ix)
{
__clear_bit(ix, l2_table->bitmap);
}
static int set_l2_table_entry(struct mlx5_core_dev *dev, u8 *mac,
u8 vlan_valid, u16 vlan,
u32 *index)
{
struct mlx5_l2_table *l2_table = &dev->priv.eswitch->l2_table;
int err;
err = alloc_l2_table_index(l2_table, index);
if (err)
return err;
err = set_l2_table_entry_cmd(dev, *index, mac, vlan_valid, vlan);
if (err)
free_l2_table_index(l2_table, *index);
return err;
}
static void del_l2_table_entry(struct mlx5_core_dev *dev, u32 index)
{
struct mlx5_l2_table *l2_table = &dev->priv.eswitch->l2_table;
del_l2_table_entry_cmd(dev, index);
free_l2_table_index(l2_table, index);
}
/* SW E-Switch L2 Table management */
static int l2_table_addr_add(struct mlx5_eswitch *esw,
u8 mac[ETH_ALEN], u32 vport)
{
struct hlist_head *hash;
struct mlx5_uc_l2addr *addr;
int err;
hash = esw->l2_table.l2_hash;
addr = l2addr_hash_find(hash, mac, struct mlx5_uc_l2addr);
if (addr) {
esw_warn(esw->dev,
"Failed to set L2 mac(%pM) for vport(%d), mac is already in use by vport(%d)\n",
mac, vport, addr->vport);
return -EEXIST;
}
addr = l2addr_hash_add(hash, mac, struct mlx5_uc_l2addr,
GFP_KERNEL);
if (!addr)
return -ENOMEM;
addr->vport = vport;
addr->action = MLX5_ACTION_NONE;
err = set_l2_table_entry(esw->dev, mac, 0, 0, &addr->table_index);
if (err)
l2addr_hash_del(addr);
else
esw_debug(esw->dev, "\tADDED L2 MAC: vport[%d] %pM index:%d\n",
vport, addr->node.addr, addr->table_index);
return err;
}
static int l2_table_addr_del(struct mlx5_eswitch *esw,
u8 mac[ETH_ALEN], u32 vport)
{
struct hlist_head *hash;
struct mlx5_uc_l2addr *addr;
hash = esw->l2_table.l2_hash;
addr = l2addr_hash_find(hash, mac, struct mlx5_uc_l2addr);
if (!addr || addr->vport != vport) {
esw_warn(esw->dev, "MAC(%pM) doesn't belong to vport (%d)\n",
mac, vport);
return -EINVAL;
}
esw_debug(esw->dev, "\tDELETE L2 MAC: vport[%d] %pM index:%d\n",
vport, addr->node.addr, addr->table_index);
del_l2_table_entry(esw->dev, addr->table_index);
l2addr_hash_del(addr);
return 0;
}
/* E-Switch vport uc list management */
/* Apply vport uc list to HW l2 table */
static void esw_apply_vport_uc_list(struct mlx5_eswitch *esw,
u32 vport_num)
{
struct mlx5_vport *vport = &esw->vports[vport_num];
struct mlx5_vport_addr *addr;
struct l2addr_node *node;
struct hlist_head *hash;
struct hlist_node *tmp;
int hi;
hash = vport->uc_list;
for_each_l2hash_node(node, tmp, hash, hi) {
addr = container_of(node, struct mlx5_vport_addr, node);
switch (addr->action) {
case MLX5_ACTION_ADD:
l2_table_addr_add(esw, addr->node.addr, vport_num);
addr->action = MLX5_ACTION_NONE;
break;
case MLX5_ACTION_DEL:
l2_table_addr_del(esw, addr->node.addr, vport_num);
l2addr_hash_del(addr);
break;
}
}
}
/* Sync vport uc list from vport context */
static void esw_update_vport_uc_list(struct mlx5_eswitch *esw,
u32 vport_num)
{
struct mlx5_vport *vport = &esw->vports[vport_num];
struct mlx5_vport_addr *addr;
struct l2addr_node *node;
u8 (*mac_list)[ETH_ALEN];
struct hlist_head *hash;
struct hlist_node *tmp;
int size;
int err;
int hi;
int i;
size = MLX5_MAX_UC_PER_VPORT(esw->dev);
mac_list = kcalloc(size, ETH_ALEN, GFP_KERNEL);
if (!mac_list)
return;
hash = vport->uc_list;
for_each_l2hash_node(node, tmp, hash, hi) {
addr = container_of(node, struct mlx5_vport_addr, node);
addr->action = MLX5_ACTION_DEL;
}
err = mlx5_query_nic_vport_mac_list(esw->dev, vport_num,
MLX5_NVPRT_LIST_TYPE_UC,
mac_list, &size);
if (err)
return;
esw_debug(esw->dev, "vport[%d] context update UC list size (%d)\n",
vport_num, size);
for (i = 0; i < size; i++) {
if (!is_valid_ether_addr(mac_list[i]))
continue;
addr = l2addr_hash_find(hash, mac_list[i],
struct mlx5_vport_addr);
if (addr) {
addr->action = MLX5_ACTION_NONE;
continue;
}
addr = l2addr_hash_add(hash, mac_list[i],
struct mlx5_vport_addr,
GFP_KERNEL);
if (!addr) {
esw_warn(esw->dev,
"Failed to add MAC(%pM) to vport[%d] DB\n",
mac_list[i], vport_num);
continue;
}
addr->action = MLX5_ACTION_ADD;
}
kfree(mac_list);
}
static void esw_vport_change_handler(struct work_struct *work)
{
struct mlx5_vport *vport =
container_of(work, struct mlx5_vport, vport_change_handler);
struct mlx5_core_dev *dev = vport->dev;
u8 mac[ETH_ALEN];
mlx5_query_nic_vport_mac_address(dev, vport->vport, mac);
if (!is_valid_ether_addr(mac))
goto out;
esw_update_vport_uc_list(dev->priv.eswitch, vport->vport);
esw_apply_vport_uc_list(dev->priv.eswitch, vport->vport);
out:
if (vport->enabled)
arm_vport_context_events_cmd(dev, vport->vport,
UC_ADDR_CHANGE);
}
static void esw_enable_vport(struct mlx5_eswitch *esw, int vport_num)
{
struct mlx5_vport *vport = &esw->vports[vport_num];
unsigned long flags;
spin_lock_irqsave(&vport->lock, flags);
vport->enabled = true;
spin_unlock_irqrestore(&vport->lock, flags);
arm_vport_context_events_cmd(esw->dev, vport_num, UC_ADDR_CHANGE);
}
static void esw_disable_vport(struct mlx5_eswitch *esw, int vport_num)
{
struct mlx5_vport *vport = &esw->vports[vport_num];
unsigned long flags;
if (!vport->enabled)
return;
/* Mark this vport as disabled to discard new events */
spin_lock_irqsave(&vport->lock, flags);
vport->enabled = false;
spin_unlock_irqrestore(&vport->lock, flags);
/* Wait for current already scheduled events to complete */
flush_workqueue(esw->work_queue);
/* Disable events from this vport */
arm_vport_context_events_cmd(esw->dev, vport->vport, 0);
}
/* Public E-Switch API */
int mlx5_eswitch_init(struct mlx5_core_dev *dev)
{
int l2_table_size = 1 << MLX5_CAP_GEN(dev, log_max_l2_table);
int total_vports = 1 + pci_sriov_get_totalvfs(dev->pdev);
struct mlx5_eswitch *esw;
int vport_num;
int err;
if (!MLX5_CAP_GEN(dev, vport_group_manager) ||
MLX5_CAP_GEN(dev, port_type) != MLX5_CAP_PORT_TYPE_ETH)
return 0;
esw_info(dev,
"Total vports %d, l2 table size(%d), per vport: max uc(%d) max mc(%d)\n",
total_vports, l2_table_size,
MLX5_MAX_UC_PER_VPORT(dev),
MLX5_MAX_MC_PER_VPORT(dev));
esw = kzalloc(sizeof(*esw), GFP_KERNEL);
if (!esw)
return -ENOMEM;
esw->dev = dev;
esw->l2_table.bitmap = kcalloc(BITS_TO_LONGS(l2_table_size),
sizeof(uintptr_t), GFP_KERNEL);
if (!esw->l2_table.bitmap) {
err = -ENOMEM;
goto abort;
}
esw->l2_table.size = l2_table_size;
esw->work_queue = create_singlethread_workqueue("mlx5_esw_wq");
if (!esw->work_queue) {
err = -ENOMEM;
goto abort;
}
esw->vports = kcalloc(total_vports, sizeof(struct mlx5_vport),
GFP_KERNEL);
if (!esw->vports) {
err = -ENOMEM;
goto abort;
}
esw->total_vports = total_vports;
for (vport_num = 0; vport_num < total_vports; vport_num++) {
struct mlx5_vport *vport = &esw->vports[vport_num];
vport->vport = vport_num;
vport->dev = dev;
INIT_WORK(&vport->vport_change_handler,
esw_vport_change_handler);
spin_lock_init(&vport->lock);
}
dev->priv.eswitch = esw;
esw_enable_vport(esw, 0);
/* VF Vports will be enabled when SRIOV is enabled */
return 0;
abort:
if (esw->work_queue)
destroy_workqueue(esw->work_queue);
kfree(esw->l2_table.bitmap);
kfree(esw->vports);
kfree(esw);
return err;
}
void mlx5_eswitch_cleanup(struct mlx5_eswitch *esw)
{
if (!esw || !MLX5_CAP_GEN(esw->dev, vport_group_manager) ||
MLX5_CAP_GEN(esw->dev, port_type) != MLX5_CAP_PORT_TYPE_ETH)
return;
esw_info(esw->dev, "cleanup\n");
esw_disable_vport(esw, 0);
esw->dev->priv.eswitch = NULL;
destroy_workqueue(esw->work_queue);
kfree(esw->l2_table.bitmap);
kfree(esw->vports);
kfree(esw);
}
void mlx5_eswitch_vport_event(struct mlx5_eswitch *esw, struct mlx5_eqe *eqe)
{
struct mlx5_eqe_vport_change *vc_eqe = &eqe->data.vport_change;
u16 vport_num = be16_to_cpu(vc_eqe->vport_num);
struct mlx5_vport *vport;
if (!esw) {
pr_warn("MLX5 E-Switch: vport %d got an event while eswitch is not initialized\n",
vport_num);
return;
}
vport = &esw->vports[vport_num];
spin_lock(&vport->lock);
if (vport->enabled)
queue_work(esw->work_queue, &vport->vport_change_handler);
spin_unlock(&vport->lock);
}
/*
* Copyright (c) 2015, Mellanox Technologies, Ltd. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#ifndef __MLX5_ESWITCH_H__
#define __MLX5_ESWITCH_H__
#include <linux/mlx5/device.h>
#define MLX5_MAX_UC_PER_VPORT(dev) \
(1 << MLX5_CAP_GEN(dev, log_max_current_uc_list))
#define MLX5_MAX_MC_PER_VPORT(dev) \
(1 << MLX5_CAP_GEN(dev, log_max_current_mc_list))
#define MLX5_L2_ADDR_HASH_SIZE (BIT(BITS_PER_BYTE))
#define MLX5_L2_ADDR_HASH(addr) (addr[5])
/* L2 -mac address based- hash helpers */
struct l2addr_node {
struct hlist_node hlist;
u8 addr[ETH_ALEN];
};
#define for_each_l2hash_node(hn, tmp, hash, i) \
for (i = 0; i < MLX5_L2_ADDR_HASH_SIZE; i++) \
hlist_for_each_entry_safe(hn, tmp, &hash[i], hlist)
#define l2addr_hash_find(hash, mac, type) ({ \
int ix = MLX5_L2_ADDR_HASH(mac); \
bool found = false; \
type *ptr = NULL; \
\
hlist_for_each_entry(ptr, &hash[ix], node.hlist) \
if (ether_addr_equal(ptr->node.addr, mac)) {\
found = true; \
break; \
} \
if (!found) \
ptr = NULL; \
ptr; \
})
#define l2addr_hash_add(hash, mac, type, gfp) ({ \
int ix = MLX5_L2_ADDR_HASH(mac); \
type *ptr = NULL; \
\
ptr = kzalloc(sizeof(type), gfp); \
if (ptr) { \
ether_addr_copy(ptr->node.addr, mac); \
hlist_add_head(&ptr->node.hlist, &hash[ix]);\
} \
ptr; \
})
#define l2addr_hash_del(ptr) ({ \
hlist_del(&ptr->node.hlist); \
kfree(ptr); \
})
struct mlx5_vport {
struct mlx5_core_dev *dev;
int vport;
struct hlist_head uc_list[MLX5_L2_ADDR_HASH_SIZE];
struct work_struct vport_change_handler;
/* This spinlock protects access to vport data, between
* "esw_vport_disable" and ongoing interrupt "mlx5_eswitch_vport_event"
* once vport marked as disabled new interrupts are discarded.
*/
spinlock_t lock; /* vport events sync */
bool enabled;
};
struct mlx5_l2_table {
struct hlist_head l2_hash[MLX5_L2_ADDR_HASH_SIZE];
u32 size;
unsigned long *bitmap;
};
struct mlx5_eswitch {
struct mlx5_core_dev *dev;
struct mlx5_l2_table l2_table;
struct workqueue_struct *work_queue;
struct mlx5_vport *vports;
int total_vports;
};
/* E-Switch API */
int mlx5_eswitch_init(struct mlx5_core_dev *dev);
void mlx5_eswitch_cleanup(struct mlx5_eswitch *esw);
void mlx5_eswitch_vport_event(struct mlx5_eswitch *esw, struct mlx5_eqe *eqe);
#endif /* __MLX5_ESWITCH_H__ */
......@@ -49,6 +49,9 @@
#include <linux/delay.h>
#include <linux/mlx5/mlx5_ifc.h>
#include "mlx5_core.h"
#ifdef CONFIG_MLX5_CORE_EN
#include "eswitch.h"
#endif
MODULE_AUTHOR("Eli Cohen <eli@mellanox.com>");
MODULE_DESCRIPTION("Mellanox Connect-IB, ConnectX-4 core driver");
......@@ -1052,6 +1055,14 @@ static int mlx5_load_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv)
mlx5_init_srq_table(dev);
mlx5_init_mr_table(dev);
#ifdef CONFIG_MLX5_CORE_EN
err = mlx5_eswitch_init(dev);
if (err) {
dev_err(&pdev->dev, "eswitch init failed %d\n", err);
goto err_reg_dev;
}
#endif
err = mlx5_sriov_init(dev);
if (err) {
dev_err(&pdev->dev, "sriov init failed %d\n", err);
......@@ -1078,6 +1089,9 @@ static int mlx5_load_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv)
if (mlx5_sriov_cleanup(dev))
dev_err(&dev->pdev->dev, "sriov cleanup failed\n");
#ifdef CONFIG_MLX5_CORE_EN
mlx5_eswitch_cleanup(dev->priv.eswitch);
#endif
err_reg_dev:
mlx5_cleanup_mr_table(dev);
mlx5_cleanup_srq_table(dev);
......@@ -1147,6 +1161,10 @@ static int mlx5_unload_one(struct mlx5_core_dev *dev, struct mlx5_priv *priv)
goto out;
}
mlx5_unregister_device(dev);
#ifdef CONFIG_MLX5_CORE_EN
mlx5_eswitch_cleanup(dev->priv.eswitch);
#endif
mlx5_cleanup_mr_table(dev);
mlx5_cleanup_srq_table(dev);
mlx5_cleanup_qp_table(dev);
......
......@@ -251,6 +251,7 @@ enum mlx5_event {
MLX5_EVENT_TYPE_PAGE_REQUEST = 0xb,
MLX5_EVENT_TYPE_PAGE_FAULT = 0xc,
MLX5_EVENT_TYPE_NIC_VPORT_CHANGE = 0xd,
};
enum {
......@@ -520,6 +521,12 @@ struct mlx5_eqe_page_fault {
__be32 flags_qpn;
} __packed;
struct mlx5_eqe_vport_change {
u8 rsvd0[2];
__be16 vport_num;
__be32 rsvd1[6];
} __packed;
union ev_data {
__be32 raw[7];
struct mlx5_eqe_cmd cmd;
......@@ -532,6 +539,7 @@ union ev_data {
struct mlx5_eqe_stall_vl stall_vl;
struct mlx5_eqe_page_req req_pages;
struct mlx5_eqe_page_fault page_fault;
struct mlx5_eqe_vport_change vport_change;
} __packed;
struct mlx5_eqe {
......
......@@ -441,6 +441,8 @@ struct mlx5_irq_info {
char name[MLX5_MAX_IRQ_NAME];
};
struct mlx5_eswitch;
struct mlx5_priv {
char name[MLX5_MAX_NAME_LEN];
struct mlx5_eq_table eq_table;
......@@ -496,6 +498,8 @@ struct mlx5_priv {
struct list_head dev_list;
struct list_head ctx_list;
spinlock_t ctx_lock;
struct mlx5_eswitch *eswitch;
struct mlx5_core_sriov sriov;
unsigned long pci_dev_data;
};
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册