提交 06da0351 编写于 作者: L Linus Torvalds

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc

Pull sparc update from David S. Miller:
 "This just removes some sparc headers that were never, ever, used."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc: remove two unused headers
#ifndef _SPARC64_CMT_H
#define _SPARC64_CMT_H
/* cmt.h: Chip Multi-Threading register definitions
*
* Copyright (C) 2004 David S. Miller (davem@redhat.com)
*/
/* ASI_CORE_ID - private */
#define LP_ID 0x0000000000000010UL
#define LP_ID_MAX 0x00000000003f0000UL
#define LP_ID_ID 0x000000000000003fUL
/* ASI_INTR_ID - private */
#define LP_INTR_ID 0x0000000000000000UL
#define LP_INTR_ID_ID 0x00000000000003ffUL
/* ASI_CESR_ID - private */
#define CESR_ID 0x0000000000000040UL
#define CESR_ID_ID 0x00000000000000ffUL
/* ASI_CORE_AVAILABLE - shared */
#define LP_AVAIL 0x0000000000000000UL
#define LP_AVAIL_1 0x0000000000000002UL
#define LP_AVAIL_0 0x0000000000000001UL
/* ASI_CORE_ENABLE_STATUS - shared */
#define LP_ENAB_STAT 0x0000000000000010UL
#define LP_ENAB_STAT_1 0x0000000000000002UL
#define LP_ENAB_STAT_0 0x0000000000000001UL
/* ASI_CORE_ENABLE - shared */
#define LP_ENAB 0x0000000000000020UL
#define LP_ENAB_1 0x0000000000000002UL
#define LP_ENAB_0 0x0000000000000001UL
/* ASI_CORE_RUNNING - shared */
#define LP_RUNNING_RW 0x0000000000000050UL
#define LP_RUNNING_W1S 0x0000000000000060UL
#define LP_RUNNING_W1C 0x0000000000000068UL
#define LP_RUNNING_1 0x0000000000000002UL
#define LP_RUNNING_0 0x0000000000000001UL
/* ASI_CORE_RUNNING_STAT - shared */
#define LP_RUN_STAT 0x0000000000000058UL
#define LP_RUN_STAT_1 0x0000000000000002UL
#define LP_RUN_STAT_0 0x0000000000000001UL
/* ASI_XIR_STEERING - shared */
#define LP_XIR_STEER 0x0000000000000030UL
#define LP_XIR_STEER_1 0x0000000000000002UL
#define LP_XIR_STEER_0 0x0000000000000001UL
/* ASI_CMT_ERROR_STEERING - shared */
#define CMT_ER_STEER 0x0000000000000040UL
#define CMT_ER_STEER_1 0x0000000000000002UL
#define CMT_ER_STEER_0 0x0000000000000001UL
#endif /* _SPARC64_CMT_H */
/*
* mpmbox.h: Interface and defines for the OpenProm mailbox
* facilities for MP machines under Linux.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
*/
#ifndef _SPARC_MPMBOX_H
#define _SPARC_MPMBOX_H
/* The prom allocates, for each CPU on the machine an unsigned
* byte in physical ram. You probe the device tree prom nodes
* for these values. The purpose of this byte is to be able to
* pass messages from one cpu to another.
*/
/* These are the main message types we have to look for in our
* Cpu mailboxes, based upon these values we decide what course
* of action to take.
*/
/* The CPU is executing code in the kernel. */
#define MAILBOX_ISRUNNING 0xf0
/* Another CPU called romvec->pv_exit(), you should call
* prom_stopcpu() when you see this in your mailbox.
*/
#define MAILBOX_EXIT 0xfb
/* Another CPU called romvec->pv_enter(), you should call
* prom_cpuidle() when this is seen.
*/
#define MAILBOX_GOSPIN 0xfc
/* Another CPU has hit a breakpoint either into kadb or the prom
* itself. Just like MAILBOX_GOSPIN, you should call prom_cpuidle()
* at this point.
*/
#define MAILBOX_BPT_SPIN 0xfd
/* Oh geese, some other nitwit got a damn watchdog reset. The party's
* over so go call prom_stopcpu().
*/
#define MAILBOX_WDOG_STOP 0xfe
#ifndef __ASSEMBLY__
/* Handy macro's to determine a cpu's state. */
/* Is the cpu still in Power On Self Test? */
#define MBOX_POST_P(letter) ((letter) >= 0x00 && (letter) <= 0x7f)
/* Is the cpu at the 'ok' prompt of the PROM? */
#define MBOX_PROMPROMPT_P(letter) ((letter) >= 0x80 && (letter) <= 0x8f)
/* Is the cpu spinning in the PROM? */
#define MBOX_PROMSPIN_P(letter) ((letter) >= 0x90 && (letter) <= 0xef)
/* Sanity check... This is junk mail, throw it out. */
#define MBOX_BOGON_P(letter) ((letter) >= 0xf1 && (letter) <= 0xfa)
/* Is the cpu actively running an application/kernel-code? */
#define MBOX_RUNNING_P(letter) ((letter) == MAILBOX_ISRUNNING)
#endif /* !(__ASSEMBLY__) */
#endif /* !(_SPARC_MPMBOX_H) */
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册