提交 062887bf 编写于 作者: G Geert Uytterhoeven 提交者: Simon Horman

ARM: shmobile: Move SoC Kconfig symbols to drivers/soc/renesas/

For consistency with arm64, where vendors have a single Kconfig symbol
in arch/arm64/Kconfig.platforms.
Signed-off-by: NGeert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: NSimon Horman <horms+renesas@verge.net.au>
上级 fa43948f
......@@ -4,31 +4,6 @@ config PM_RMOBILE
select PM
select PM_GENERIC_DOMAINS
config ARCH_RCAR_GEN1
bool
select PM
select PM_GENERIC_DOMAINS
select RENESAS_INTC_IRQPIN
select SYS_SUPPORTS_SH_TMU
config ARCH_RCAR_GEN2
bool
select HAVE_ARM_ARCH_TIMER
select PM
select PM_GENERIC_DOMAINS
select RENESAS_IRQC
select SYS_SUPPORTS_SH_CMT
config ARCH_RMOBILE
bool
select PM_RMOBILE
select SYS_SUPPORTS_SH_CMT
select SYS_SUPPORTS_SH_TMU
config ARCH_RZN1
bool
select ARM_AMBA
menuconfig ARCH_RENESAS
bool "Renesas ARM SoCs"
depends on ARCH_MULTI_V7 && MMU
......@@ -38,104 +13,3 @@ menuconfig ARCH_RENESAS
select PINCTRL
select SOC_BUS
select ZONE_DMA if ARM_LPAE
if ARCH_RENESAS
#comment "Renesas ARM SoCs System Type"
config ARCH_EMEV2
bool "Emma Mobile EV2"
select HAVE_ARM_SCU if SMP
select SYS_SUPPORTS_EM_STI
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
select PM
select PM_GENERIC_DOMAINS
select SYS_SUPPORTS_SH_MTU2
select RENESAS_OSTM
config ARCH_R7S9210
bool "RZ/A2 (R7S9210)"
select PM
select PM_GENERIC_DOMAINS
select RENESAS_OSTM
config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
select ARCH_RMOBILE
select ARM_ERRATA_798181 if SMP
select HAVE_ARM_ARCH_TIMER
select RENESAS_IRQC
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
select ARCH_RMOBILE
select RENESAS_INTC_IRQPIN
config ARCH_R8A7743
bool "RZ/G1M (R8A77430)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
config ARCH_R8A7744
bool "RZ/G1N (R8A77440)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
config ARCH_R8A7745
bool "RZ/G1E (R8A77450)"
select ARCH_RCAR_GEN2
config ARCH_R8A77470
bool "RZ/G1C (R8A77470)"
select ARCH_RCAR_GEN2
config ARCH_R8A7778
bool "R-Car M1A (R8A77781)"
select ARCH_RCAR_GEN1
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select ARCH_RCAR_GEN1
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
select I2C
config ARCH_R8A7791
bool "R-Car M2-W (R8A77910)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
select I2C
config ARCH_R8A7792
bool "R-Car V2H (R8A77920)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
config ARCH_R8A7793
bool "R-Car M2-N (R8A7793)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
select I2C
config ARCH_R8A7794
bool "R-Car E2 (R8A77940)"
select ARCH_RCAR_GEN2
config ARCH_R9A06G032
bool "RZ/N1D (R9A06G032)"
select ARCH_RZN1
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
select ARCH_RMOBILE
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select RENESAS_INTC_IRQPIN
endif
......@@ -3,18 +3,26 @@ config SOC_RENESAS
bool "Renesas SoC driver support" if COMPILE_TEST && !ARCH_RENESAS
default y if ARCH_RENESAS
select SOC_BUS
select RST_RCAR if ARCH_RCAR_GEN1 || ARCH_RCAR_GEN2
select SYSC_R8A7743 if ARCH_R8A7743 || ARCH_R8A7744
select SYSC_R8A7745 if ARCH_R8A7745
select SYSC_R8A77470 if ARCH_R8A77470
select SYSC_R8A7779 if ARCH_R8A7779
select SYSC_R8A7790 if ARCH_R8A7790
select SYSC_R8A7791 if ARCH_R8A7791 || ARCH_R8A7793
select SYSC_R8A7792 if ARCH_R8A7792
select SYSC_R8A7794 if ARCH_R8A7794
if SOC_RENESAS
config ARCH_RCAR_GEN1
bool
select PM
select PM_GENERIC_DOMAINS
select RENESAS_INTC_IRQPIN
select RST_RCAR
select SYS_SUPPORTS_SH_TMU
config ARCH_RCAR_GEN2
bool
select HAVE_ARM_ARCH_TIMER
select PM
select PM_GENERIC_DOMAINS
select RENESAS_IRQC
select RST_RCAR
select SYS_SUPPORTS_SH_CMT
config ARCH_RCAR_GEN3
bool
select PM
......@@ -24,6 +32,128 @@ config ARCH_RCAR_GEN3
select SYS_SUPPORTS_SH_CMT
select SYS_SUPPORTS_SH_TMU
config ARCH_RMOBILE
bool
select PM_RMOBILE
select SYS_SUPPORTS_SH_CMT
select SYS_SUPPORTS_SH_TMU
config ARCH_RZN1
bool
select ARM_AMBA
if ARM
#comment "Renesas ARM SoCs System Type"
config ARCH_EMEV2
bool "Emma Mobile EV2"
select HAVE_ARM_SCU if SMP
select SYS_SUPPORTS_EM_STI
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
select PM
select PM_GENERIC_DOMAINS
select SYS_SUPPORTS_SH_MTU2
select RENESAS_OSTM
config ARCH_R7S9210
bool "RZ/A2 (R7S9210)"
select PM
select PM_GENERIC_DOMAINS
select RENESAS_OSTM
config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
select ARCH_RMOBILE
select ARM_ERRATA_798181 if SMP
select HAVE_ARM_ARCH_TIMER
select RENESAS_IRQC
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
select ARCH_RMOBILE
select RENESAS_INTC_IRQPIN
config ARCH_R8A7743
bool "RZ/G1M (R8A77430)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
select SYSC_R8A7743
config ARCH_R8A7744
bool "RZ/G1N (R8A77440)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
select SYSC_R8A7743
config ARCH_R8A7745
bool "RZ/G1E (R8A77450)"
select ARCH_RCAR_GEN2
select SYSC_R8A7745
config ARCH_R8A77470
bool "RZ/G1C (R8A77470)"
select ARCH_RCAR_GEN2
select SYSC_R8A77470
config ARCH_R8A7778
bool "R-Car M1A (R8A77781)"
select ARCH_RCAR_GEN1
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
select ARCH_RCAR_GEN1
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select SYSC_R8A7779
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
select I2C
select SYSC_R8A7790
config ARCH_R8A7791
bool "R-Car M2-W (R8A77910)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
select I2C
select SYSC_R8A7791
config ARCH_R8A7792
bool "R-Car V2H (R8A77920)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
select SYSC_R8A7792
config ARCH_R8A7793
bool "R-Car M2-N (R8A7793)"
select ARCH_RCAR_GEN2
select ARM_ERRATA_798181 if SMP
select I2C
select SYSC_R8A7791
config ARCH_R8A7794
bool "R-Car E2 (R8A77940)"
select ARCH_RCAR_GEN2
select SYSC_R8A7794
config ARCH_R9A06G032
bool "RZ/N1D (R9A06G032)"
select ARCH_RZN1
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
select ARCH_RMOBILE
select HAVE_ARM_SCU if SMP
select HAVE_ARM_TWD if SMP
select RENESAS_INTC_IRQPIN
endif # ARM
if ARM64
config ARCH_R8A774A1
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册