Skip to content

C
clone-Linux

gsplhtlxg / clone-Linux

通知 2
Star 0
Fork 1
C
clone-Linux

体验新版 GitCode，发现更多精彩内容 >>

提交 02a99ed6 编写于 作者: L Linus Torvalds
浏览文件
操作

Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze 

* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (55 commits)
  microblaze: Don't use access_ok for unaligned
  microblaze: remove unused flat_stack_align() definition
  microblaze: Fix problem with early_printk in startup
  microblaze_mmu_v2: Makefiles
  microblaze_mmu_v2: Kconfig update
  microblaze_mmu_v2: stat.h MMU update
  microblaze_mmu_v2: Elf update
  microblaze_mmu_v2: Update dma.h for MMU
  microblaze_mmu_v2: Update cacheflush.h
  microblaze_mmu_v2: Update signal returning address
  microblaze_mmu_v2: Traps MMU update
  microblaze_mmu_v2: Enable fork syscall for MMU and add fork as vfork for noMMU
  microblaze_mmu_v2: Update linker script for MMU
  microblaze_mmu_v2: Add MMU related exceptions handling
  microblaze_mmu_v2: uaccess MMU update
  microblaze_mmu_v2: Update exception handling - MMU exception
  microblaze_mmu_v2: entry.S, entry.h
  microblaze_mmu_v2: Add CURRENT_TASK for entry.S
  microblaze_mmu_v2: MMU asm offset update
  microblaze_mmu_v2: Update tlb.h and tlbflush.h
  ...
上级 2b10dc45 3447ef29
展开全部 隐藏空白更改
内联 并排
Showing with 6130 addition and 559 deletion
arch/microblaze/Kconfig
浏览文件 @ 02a99ed6
......@@ -6,6 +6,7 @@ mainmenu "Linux/Microblaze Kernel Configuration"
config MICROBLAZE
def_bool y
select HAVE_LMB
select ARCH_WANT_OPTIONAL_GPIOLIB
config SWAP
def_bool n
......@@ -49,13 +50,14 @@ config GENERIC_CLOCKEVENTS
config GENERIC_HARDIRQS_NO__DO_IRQ
def_bool y
config GENERIC_GPIO
def_bool y
config PCI
depends on !MMU
def_bool n
config NO_DMA
depends on !MMU
def_bool n
def_bool y
source "init/Kconfig"
......@@ -72,7 +74,8 @@ source "kernel/Kconfig.preempt"
source "kernel/Kconfig.hz"
config MMU
def_bool n
bool "MMU support"
default n
config NO_MMU
bool
......@@ -105,9 +108,6 @@ config CMDLINE_FORCE
config OF
def_bool y
config OF_DEVICE
def_bool y
config PROC_DEVICETREE
bool "Support for device tree in /proc"
depends on PROC_FS
......@@ -118,6 +118,113 @@ config PROC_DEVICETREE
endmenu
menu "Advanced setup"
config ADVANCED_OPTIONS
bool "Prompt for advanced kernel configuration options"
depends on MMU
help
This option will enable prompting for a variety of advanced kernel
configuration options. These options can cause the kernel to not
work if they are set incorrectly, but can be used to optimize certain
aspects of kernel memory management.
Unless you know what you are doing, say N here.
comment "Default settings for advanced configuration options are used"
depends on !ADVANCED_OPTIONS
config HIGHMEM_START_BOOL
bool "Set high memory pool address"
depends on ADVANCED_OPTIONS && HIGHMEM
help
This option allows you to set the base address of the kernel virtual
area used to map high memory pages. This can be useful in
optimizing the layout of kernel virtual memory.
Say N here unless you know what you are doing.
config HIGHMEM_START
hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
depends on MMU
default "0xfe000000"
config LOWMEM_SIZE_BOOL
bool "Set maximum low memory"
depends on ADVANCED_OPTIONS
help
This option allows you to set the maximum amount of memory which
will be used as "low memory", that is, memory which the kernel can
access directly, without having to set up a kernel virtual mapping.
This can be useful in optimizing the layout of kernel virtual
memory.
Say N here unless you know what you are doing.
config LOWMEM_SIZE
hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
depends on MMU
default "0x30000000"
config KERNEL_START_BOOL
bool "Set custom kernel base address"
depends on ADVANCED_OPTIONS
help
This option allows you to set the kernel virtual address at which
the kernel will map low memory (the kernel image will be linked at
this address). This can be useful in optimizing the virtual memory
layout of the system.
Say N here unless you know what you are doing.
config KERNEL_START
hex "Virtual address of kernel base" if KERNEL_START_BOOL
default "0xc0000000" if MMU
default KERNEL_BASE_ADDR if !MMU
config TASK_SIZE_BOOL
bool "Set custom user task size"
depends on ADVANCED_OPTIONS
help
This option allows you to set the amount of virtual address space
allocated to user tasks. This can be useful in optimizing the
virtual memory layout of the system.
Say N here unless you know what you are doing.
config TASK_SIZE
hex "Size of user task space" if TASK_SIZE_BOOL
depends on MMU
default "0x80000000"
config CONSISTENT_START_BOOL
bool "Set custom consistent memory pool address"
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
This option allows you to set the base virtual address
of the the consistent memory pool. This pool of virtual
memory is used to make consistent memory allocations.
config CONSISTENT_START
hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
depends on MMU
default "0xff100000" if NOT_COHERENT_CACHE
config CONSISTENT_SIZE_BOOL
bool "Set custom consistent memory pool size"
depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
help
This option allows you to set the size of the the
consistent memory pool. This pool of virtual memory
is used to make consistent memory allocations.
config CONSISTENT_SIZE
hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
depends on MMU
default "0x00200000" if NOT_COHERENT_CACHE
endmenu
source "mm/Kconfig"
menu "Exectuable file formats"
......
arch/microblaze/Makefile
浏览文件 @ 02a99ed6
ifeq ($(CONFIG_MMU),y)
UTS_SYSNAME = -DUTS_SYSNAME=\"Linux\"
else
UTS_SYSNAME = -DUTS_SYSNAME=\"uClinux\"
endif
# What CPU vesion are we building for, and crack it open
# as major.minor.rev
......@@ -36,6 +40,8 @@ CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
# r31 holds current when in kernel mode
CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
LDFLAGS :=
LDFLAGS_vmlinux :=
LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name)
......
arch/microblaze/boot/Makefile
浏览文件 @ 02a99ed6
......@@ -7,6 +7,8 @@ targets := linux.bin linux.bin.gz
OBJCOPYFLAGS_linux.bin := -O binary
$(obj)/linux.bin: vmlinux FORCE
[ -n $(CONFIG_INITRAMFS_SOURCE) ] && [ ! -e $(CONFIG_INITRAMFS_SOURCE) ] && \
touch $(CONFIG_INITRAMFS_SOURCE) || echo "No CPIO image"
$(call if_changed,objcopy)
@echo 'Kernel: $@ is ready' ' (#'`cat .version`')'
......
arch/microblaze/configs/mmu_defconfig 0 → 100644
浏览文件 @ 02a99ed6
#
# Automatically generated make config: don't edit
# Linux kernel version: 2.6.30-rc6
# Fri May 22 10:02:33 2009
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U32 is not set
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_GENERIC_TIME=y
# CONFIG_GENERIC_TIME_VSYSCALL is not set
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_GPIO=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
# General setup
#
CONFIG_EXPERIMENTAL=y
CONFIG_BROKEN_ON_SMP=y
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_POSIX_MQUEUE is not set
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
#
# RCU Subsystem
#
CONFIG_CLASSIC_RCU=y
# CONFIG_TREE_RCU is not set
# CONFIG_PREEMPT_RCU is not set
# CONFIG_TREE_RCU_TRACE is not set
# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
CONFIG_INITRAMFS_ROOT_UID=0
CONFIG_INITRAMFS_ROOT_GID=0
CONFIG_RD_GZIP=y
# CONFIG_RD_BZIP2 is not set
# CONFIG_RD_LZMA is not set
CONFIG_INITRAMFS_COMPRESSION_NONE=y
# CONFIG_INITRAMFS_COMPRESSION_GZIP is not set
# CONFIG_INITRAMFS_COMPRESSION_BZIP2 is not set
# CONFIG_INITRAMFS_COMPRESSION_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
# CONFIG_EPOLL is not set
# CONFIG_SIGNALFD is not set
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
# CONFIG_SHMEM is not set
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
#
CONFIG_IOSCHED_NOOP=y
CONFIG_IOSCHED_AS=y
CONFIG_IOSCHED_DEADLINE=y
CONFIG_IOSCHED_CFQ=y
# CONFIG_DEFAULT_AS is not set
# CONFIG_DEFAULT_DEADLINE is not set
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_FREEZER is not set
#
# Platform options
#
CONFIG_PLATFORM_GENERIC=y
CONFIG_OPT_LIB_FUNCTION=y
CONFIG_OPT_LIB_ASM=y
CONFIG_ALLOW_EDIT_AUTO=y
#
# Automatic platform settings from Kconfig.auto
#
#
# Definitions for MICROBLAZE0
#
CONFIG_KERNEL_BASE_ADDR=0x90000000
CONFIG_XILINX_MICROBLAZE0_FAMILY="virtex5"
CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
CONFIG_XILINX_MICROBLAZE0_USE_DIV=1
CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=2
CONFIG_XILINX_MICROBLAZE0_USE_FPU=2
CONFIG_XILINX_MICROBLAZE0_HW_VER="7.10.d"
#
# Processor type and features
#
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_HZ_100=y
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
# CONFIG_HZ_1000 is not set
CONFIG_HZ=100
# CONFIG_SCHED_HRTICK is not set
CONFIG_MMU=y
#
# Boot options
#
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyUL0,115200"
CONFIG_CMDLINE_FORCE=y
CONFIG_OF=y
CONFIG_PROC_DEVICETREE=y
#
# Advanced setup
#
# CONFIG_ADVANCED_OPTIONS is not set
#
# Default settings for advanced configuration options are used
#
CONFIG_HIGHMEM_START=0xfe000000
CONFIG_LOWMEM_SIZE=0x30000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_TASK_SIZE=0x80000000
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
#
# Exectuable file formats
#
CONFIG_BINFMT_ELF=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_NET=y
#
# Networking options
#
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
CONFIG_XFRM=y
# CONFIG_XFRM_USER is not set
# CONFIG_XFRM_SUB_POLICY is not set
# CONFIG_XFRM_MIGRATE is not set
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
# CONFIG_IP_MULTICAST is not set
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
# CONFIG_IP_PNP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
# CONFIG_INET_ESP is not set
# CONFIG_INET_IPCOMP is not set
# CONFIG_INET_XFRM_TUNNEL is not set
# CONFIG_INET_TUNNEL is not set
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
# CONFIG_INET_LRO is not set
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
CONFIG_TCP_CONG_CUBIC=y
CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TCP_MD5SIG is not set
# CONFIG_IPV6 is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
# CONFIG_X25 is not set
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
#
# Device Drivers
#
#
# Generic Driver Options
#
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
# CONFIG_CONNECTOR is not set
# CONFIG_MTD is not set
CONFIG_OF_DEVICE=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_COW_COMMON is not set
# CONFIG_BLK_DEV_LOOP is not set
# CONFIG_BLK_DEV_NBD is not set
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=16
CONFIG_BLK_DEV_RAM_SIZE=8192
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_XILINX_SYSACE is not set
CONFIG_MISC_DEVICES=y
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
#
# EEPROM support
#
# CONFIG_EEPROM_93CX6 is not set
#
# SCSI device support
#
# CONFIG_RAID_ATTRS is not set
# CONFIG_SCSI is not set
# CONFIG_SCSI_DMA is not set
# CONFIG_SCSI_NETLINK is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
# CONFIG_EQUALIZER is not set
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
CONFIG_NETDEV_10000=y
#
# Wireless LAN
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
#
# CONFIG_WAN is not set
# CONFIG_PPP is not set
# CONFIG_SLIP is not set
# CONFIG_NETCONSOLE is not set
# CONFIG_NETPOLL is not set
# CONFIG_NET_POLL_CONTROLLER is not set
# CONFIG_ISDN is not set
# CONFIG_PHONE is not set
#
# Input device support
#
# CONFIG_INPUT is not set
#
# Hardware I/O ports
#
# CONFIG_SERIO is not set
# CONFIG_GAMEPORT is not set
#
# Character devices
#
# CONFIG_VT is not set
CONFIG_DEVKMEM=y
# CONFIG_SERIAL_NONSTANDARD is not set
#
# Serial drivers
#
# CONFIG_SERIAL_8250 is not set
#
# Non-8250 serial port support
#
CONFIG_SERIAL_UARTLITE=y
CONFIG_SERIAL_UARTLITE_CONSOLE=y
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
CONFIG_UNIX98_PTYS=y
# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_XILINX_HWICAP is not set
# CONFIG_R3964 is not set
# CONFIG_RAW_DRIVER is not set
# CONFIG_TCG_TPM is not set
# CONFIG_I2C is not set
# CONFIG_SPI is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_REGULATOR is not set
#
# Multimedia devices
#
#
# Multimedia core support
#
# CONFIG_VIDEO_DEV is not set
# CONFIG_DVB_CORE is not set
# CONFIG_VIDEO_MEDIA is not set
#
# Multimedia drivers
#
# CONFIG_DAB is not set
#
# Graphics support
#
# CONFIG_VGASTATE is not set
# CONFIG_VIDEO_OUTPUT_CONTROL is not set
# CONFIG_FB is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
# CONFIG_SOUND is not set
# CONFIG_USB_SUPPORT is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
#
# File systems
#
CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
# CONFIG_EXT3_FS is not set
# CONFIG_EXT4_FS is not set
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
# CONFIG_DNOTIFY is not set
# CONFIG_INOTIFY is not set
# CONFIG_QUOTA is not set
# CONFIG_AUTOFS_FS is not set
# CONFIG_AUTOFS4_FS is not set
# CONFIG_FUSE_FS is not set
#
# Caches
#
# CONFIG_FSCACHE is not set
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
# CONFIG_UDF_FS is not set
#
# DOS/FAT/NT Filesystems
#
# CONFIG_MSDOS_FS is not set
# CONFIG_VFAT_FS is not set
# CONFIG_NTFS_FS is not set
#
# Pseudo filesystems
#
CONFIG_PROC_FS=y
# CONFIG_PROC_KCORE is not set
CONFIG_PROC_SYSCTL=y
CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
# CONFIG_HFSPLUS_FS is not set
# CONFIG_BEFS_FS is not set
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_CIFS=y
CONFIG_CIFS_STATS=y
CONFIG_CIFS_STATS2=y
# CONFIG_CIFS_WEAK_PW_HASH is not set
# CONFIG_CIFS_XATTR is not set
# CONFIG_CIFS_DEBUG2 is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
# CONFIG_AFS_FS is not set
#
# Partition Types
#
CONFIG_PARTITION_ADVANCED=y
# CONFIG_ACORN_PARTITION is not set
# CONFIG_OSF_PARTITION is not set
# CONFIG_AMIGA_PARTITION is not set
# CONFIG_ATARI_PARTITION is not set
# CONFIG_MAC_PARTITION is not set
CONFIG_MSDOS_PARTITION=y
# CONFIG_BSD_DISKLABEL is not set
# CONFIG_MINIX_SUBPARTITION is not set
# CONFIG_SOLARIS_X86_PARTITION is not set
# CONFIG_UNIXWARE_DISKLABEL is not set
# CONFIG_LDM_PARTITION is not set
# CONFIG_SGI_PARTITION is not set
# CONFIG_ULTRIX_PARTITION is not set
# CONFIG_SUN_PARTITION is not set
# CONFIG_KARMA_PARTITION is not set
# CONFIG_EFI_PARTITION is not set
# CONFIG_SYSV68_PARTITION is not set
CONFIG_NLS=y
CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_CODEPAGE_437 is not set
# CONFIG_NLS_CODEPAGE_737 is not set
# CONFIG_NLS_CODEPAGE_775 is not set
# CONFIG_NLS_CODEPAGE_850 is not set
# CONFIG_NLS_CODEPAGE_852 is not set
# CONFIG_NLS_CODEPAGE_855 is not set
# CONFIG_NLS_CODEPAGE_857 is not set
# CONFIG_NLS_CODEPAGE_860 is not set
# CONFIG_NLS_CODEPAGE_861 is not set
# CONFIG_NLS_CODEPAGE_862 is not set
# CONFIG_NLS_CODEPAGE_863 is not set
# CONFIG_NLS_CODEPAGE_864 is not set
# CONFIG_NLS_CODEPAGE_865 is not set
# CONFIG_NLS_CODEPAGE_866 is not set
# CONFIG_NLS_CODEPAGE_869 is not set
# CONFIG_NLS_CODEPAGE_936 is not set
# CONFIG_NLS_CODEPAGE_950 is not set
# CONFIG_NLS_CODEPAGE_932 is not set
# CONFIG_NLS_CODEPAGE_949 is not set
# CONFIG_NLS_CODEPAGE_874 is not set
# CONFIG_NLS_ISO8859_8 is not set
# CONFIG_NLS_CODEPAGE_1250 is not set
# CONFIG_NLS_CODEPAGE_1251 is not set
# CONFIG_NLS_ASCII is not set
# CONFIG_NLS_ISO8859_1 is not set
# CONFIG_NLS_ISO8859_2 is not set
# CONFIG_NLS_ISO8859_3 is not set
# CONFIG_NLS_ISO8859_4 is not set
# CONFIG_NLS_ISO8859_5 is not set
# CONFIG_NLS_ISO8859_6 is not set
# CONFIG_NLS_ISO8859_7 is not set
# CONFIG_NLS_ISO8859_9 is not set
# CONFIG_NLS_ISO8859_13 is not set
# CONFIG_NLS_ISO8859_14 is not set
# CONFIG_NLS_ISO8859_15 is not set
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
#
# Kernel hacking
#
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_OBJECTS is not set
CONFIG_DEBUG_SLAB=y
# CONFIG_DEBUG_SLAB_LEAK is not set
CONFIG_DEBUG_SPINLOCK=y
# CONFIG_DEBUG_MUTEXES is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_PAGE_POISONING is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_HEART_BEAT=y
CONFIG_DEBUG_BOOTMEM=y
#
# Security options
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
#
# Authenticated Encryption with Associated Data
#
# CONFIG_CRYPTO_CCM is not set
# CONFIG_CRYPTO_GCM is not set
# CONFIG_CRYPTO_SEQIV is not set
#
# Block modes
#
# CONFIG_CRYPTO_CBC is not set
# CONFIG_CRYPTO_CTR is not set
# CONFIG_CRYPTO_CTS is not set
# CONFIG_CRYPTO_ECB is not set
# CONFIG_CRYPTO_LRW is not set
# CONFIG_CRYPTO_PCBC is not set
# CONFIG_CRYPTO_XTS is not set
#
# Hash modes
#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
#
# Digest
#
# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
# CONFIG_CRYPTO_RMD128 is not set
# CONFIG_CRYPTO_RMD160 is not set
# CONFIG_CRYPTO_RMD256 is not set
# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
# CONFIG_CRYPTO_TGR192 is not set
# CONFIG_CRYPTO_WP512 is not set
#
# Ciphers
#
# CONFIG_CRYPTO_AES is not set
# CONFIG_CRYPTO_ANUBIS is not set
# CONFIG_CRYPTO_ARC4 is not set
# CONFIG_CRYPTO_BLOWFISH is not set
# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
# CONFIG_CRYPTO_DES is not set
# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
# CONFIG_CRYPTO_SALSA20 is not set
# CONFIG_CRYPTO_SEED is not set
# CONFIG_CRYPTO_SERPENT is not set
# CONFIG_CRYPTO_TEA is not set
# CONFIG_CRYPTO_TWOFISH is not set
#
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# Random Number Generation
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
CONFIG_NLATTR=y
arch/microblaze/include/asm/Kbuild
浏览文件 @ 02a99ed6
include include/asm-generic/Kbuild.asm
header-y += auxvec.h
header-y += errno.h
header-y += fcntl.h
header-y += ioctl.h
header-y += ioctls.h
header-y += ipcbuf.h
header-y += linkage.h
header-y += msgbuf.h
header-y += poll.h
header-y += resource.h
header-y += sembuf.h
header-y += shmbuf.h
header-y += sigcontext.h
header-y += siginfo.h
header-y += socket.h
header-y += sockios.h
header-y += statfs.h
header-y += stat.h
header-y += termbits.h
header-y += ucontext.h
unifdef-y += cputable.h
unifdef-y += elf.h
unifdef-y += termios.h
header-y += elf.h
arch/microblaze/include/asm/cacheflush.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2007 PetaLogix
* Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2007-2009 PetaLogix
* Copyright (C) 2007 John Williams <john.williams@petalogix.com>
* based on v850 version which was
* Copyright (C) 2001,02,03 NEC Electronics Corporation
......@@ -43,6 +44,23 @@
#define flush_icache_range(start, len) __invalidate_icache_range(start, len)
#define flush_icache_page(vma, pg) do { } while (0)
#ifndef CONFIG_MMU
# define flush_icache_user_range(start, len) do { } while (0)
#else
# define flush_icache_user_range(vma, pg, adr, len) __invalidate_icache_all()
# define flush_page_to_ram(page) do { } while (0)
# define flush_icache() __invalidate_icache_all()
# define flush_cache_sigtramp(vaddr) \
__invalidate_icache_range(vaddr, vaddr + 8)
# define flush_dcache_mmap_lock(mapping) do { } while (0)
# define flush_dcache_mmap_unlock(mapping) do { } while (0)
# define flush_cache_dup_mm(mm) do { } while (0)
#endif
#define flush_cache_vmap(start, end) do { } while (0)
#define flush_cache_vunmap(start, end) do { } while (0)
......
arch/microblaze/include/asm/checksum.h
浏览文件 @ 02a99ed6
......@@ -51,7 +51,8 @@ extern __wsum csum_partial(const void *buff, int len, __wsum sum);
* here even more important to align src and dst on a 32-bit (or even
* better 64-bit) boundary
*/
extern __wsum csum_partial_copy(const char *src, char *dst, int len, int sum);
extern __wsum csum_partial_copy(const void *src, void *dst, int len,
__wsum sum);
/*
* the same as csum_partial_copy, but copies from user space.
......@@ -59,8 +60,8 @@ extern __wsum csum_partial_copy(const char *src, char *dst, int len, int sum);
* here even more important to align src and dst on a 32-bit (or even
* better 64-bit) boundary
*/
extern __wsum csum_partial_copy_from_user(const char *src, char *dst,
int len, int sum, int *csum_err);
extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
int len, __wsum sum, int *csum_err);
#define csum_partial_copy_nocheck(src, dst, len, sum) \
csum_partial_copy((src), (dst), (len), (sum))
......@@ -75,11 +76,12 @@ extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
/*
* Fold a partial checksum
*/
static inline __sum16 csum_fold(unsigned int sum)
static inline __sum16 csum_fold(__wsum csum)
{
u32 sum = (__force u32)csum;
sum = (sum & 0xffff) + (sum >> 16);
sum = (sum & 0xffff) + (sum >> 16);
return ~sum;
return (__force __sum16)~sum;
}
static inline __sum16
......@@ -93,6 +95,6 @@ csum_tcpudp_magic(__be32 saddr, __be32 daddr, unsigned short len,
* this routine is used for miscellaneous IP-like checksums, mainly
* in icmp.c
*/
extern __sum16 ip_compute_csum(const unsigned char *buff, int len);
extern __sum16 ip_compute_csum(const void *buff, int len);
#endif /* _ASM_MICROBLAZE_CHECKSUM_H */
arch/microblaze/include/asm/current.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
......@@ -9,6 +11,12 @@
#ifndef _ASM_MICROBLAZE_CURRENT_H
#define _ASM_MICROBLAZE_CURRENT_H
/*
* Register used to hold the current task pointer while in the kernel.
* Any `call clobbered' register without a special meaning should be OK,
* but check asm/microblaze/kernel/entry.S to be sure.
*/
#define CURRENT_TASK r31
# ifndef __ASSEMBLY__
/*
* Dedicate r31 to keeping the current task pointer
......
arch/microblaze/include/asm/dma-mapping.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#ifndef _ASM_MICROBLAZE_DMA_MAPPING_H
#define _ASM_MICROBLAZE_DMA_MAPPING_H
#include <asm/cacheflush.h>
#include <linux/io.h>
#include <linux/bug.h>
struct scatterlist;
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
/* FIXME */
static inline int
dma_supported(struct device *dev, u64 mask)
{
return 1;
}
static inline dma_addr_t
dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size,
enum dma_data_direction direction)
{
BUG();
return 0;
}
static inline void
dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
enum dma_data_direction direction)
{
BUG();
}
static inline int
dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction direction)
{
BUG();
return 0;
}
static inline void
dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
enum dma_data_direction direction)
{
BUG();
}
static inline void
dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle, size_t size,
enum dma_data_direction direction)
{
BUG();
}
static inline void
dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
size_t size, enum dma_data_direction direction)
{
BUG();
}
static inline void
dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
enum dma_data_direction direction)
{
BUG();
}
static inline void
dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg, int nelems,
enum dma_data_direction direction)
{
BUG();
}
static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
{
return 0;
}
static inline void *dma_alloc_coherent(struct device *dev, size_t size,
dma_addr_t *dma_handle, int flag)
{
return NULL; /* consistent_alloc(flag, size, dma_handle); */
}
static inline void dma_free_coherent(struct device *dev, size_t size,
void *vaddr, dma_addr_t dma_handle)
{
BUG();
}
static inline dma_addr_t
dma_map_single(struct device *dev, void *ptr, size_t size,
enum dma_data_direction direction)
{
BUG_ON(direction == DMA_NONE);
return virt_to_bus(ptr);
}
static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
size_t size,
enum dma_data_direction direction)
{
switch (direction) {
case DMA_FROM_DEVICE:
flush_dcache_range((unsigned)dma_addr,
(unsigned)dma_addr + size);
/* Fall through */
case DMA_TO_DEVICE:
break;
default:
BUG();
}
}
#endif /* _ASM_MICROBLAZE_DMA_MAPPING_H */
#include <asm-generic/dma-mapping-broken.h>
arch/microblaze/include/asm/dma.h
浏览文件 @ 02a99ed6
......@@ -9,8 +9,13 @@
#ifndef _ASM_MICROBLAZE_DMA_H
#define _ASM_MICROBLAZE_DMA_H
#ifndef CONFIG_MMU
/* we don't have dma address limit. define it as zero to be
* unlimited. */
#define MAX_DMA_ADDRESS (0)
#else
/* Virtual address corresponding to last available physical memory address. */
#define MAX_DMA_ADDRESS (CONFIG_KERNEL_START + memory_size - 1)
#endif
#endif /* _ASM_MICROBLAZE_DMA_H */
arch/microblaze/include/asm/elf.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
......@@ -27,4 +29,95 @@
*/
#define ELF_CLASS ELFCLASS32
#ifndef __uClinux__
/*
* ELF register definitions..
*/
#include <asm/ptrace.h>
#include <asm/byteorder.h>
#ifndef ELF_GREG_T
#define ELF_GREG_T
typedef unsigned long elf_greg_t;
#endif
#ifndef ELF_NGREG
#define ELF_NGREG (sizeof(struct pt_regs) / sizeof(elf_greg_t))
#endif
#ifndef ELF_GREGSET_T
#define ELF_GREGSET_T
typedef elf_greg_t elf_gregset_t[ELF_NGREG];
#endif
#ifndef ELF_FPREGSET_T
#define ELF_FPREGSET_T
/* TBD */
#define ELF_NFPREG 33 /* includes fsr */
typedef unsigned long elf_fpreg_t;
typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
/* typedef struct user_fpu_struct elf_fpregset_t; */
#endif
/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
* use of this is to invoke "./ld.so someprog" to test out a new version of
* the loader. We need to make sure that it is out of the way of the program
* that it will "exec", and that there is sufficient room for the brk.
*/
#define ELF_ET_DYN_BASE (0x08000000)
#ifdef __LITTLE_ENDIAN__
#define ELF_DATA ELFDATA2LSB
#else
#define ELF_DATA ELFDATA2MSB
#endif
#define USE_ELF_CORE_DUMP
#define ELF_EXEC_PAGESIZE 4096
#define ELF_CORE_COPY_REGS(_dest, _regs) \
memcpy((char *) &_dest, (char *) _regs, \
sizeof(struct pt_regs));
/* This yields a mask that user programs can use to figure out what
* instruction set this CPU supports. This could be done in user space,
* but it's not easy, and we've already done it here.
*/
#define ELF_HWCAP (0)
/* This yields a string that ld.so will use to load implementation
* specific libraries for optimization. This is more specific in
* intent than poking at uname or /proc/cpuinfo.
* For the moment, we have only optimizations for the Intel generations,
* but that could change...
*/
#define ELF_PLATFORM (NULL)
/* Added _f parameter. Is this definition correct: TBD */
#define ELF_PLAT_INIT(_r, _f) \
do { \
_r->r1 = _r->r1 = _r->r2 = _r->r3 = \
_r->r4 = _r->r5 = _r->r6 = _r->r7 = \
_r->r8 = _r->r9 = _r->r10 = _r->r11 = \
_r->r12 = _r->r13 = _r->r14 = _r->r15 = \
_r->r16 = _r->r17 = _r->r18 = _r->r19 = \
_r->r20 = _r->r21 = _r->r22 = _r->r23 = \
_r->r24 = _r->r25 = _r->r26 = _r->r27 = \
_r->r28 = _r->r29 = _r->r30 = _r->r31 = \
0; \
} while (0)
#ifdef __KERNEL__
#define SET_PERSONALITY(ex) set_personality(PER_LINUX_32BIT)
#endif
#endif /* __uClinux__ */
#endif /* _ASM_MICROBLAZE_ELF_H */
arch/microblaze/include/asm/entry.h
浏览文件 @ 02a99ed6
/*
* Definitions used by low-level trap handlers
*
* Copyright (C) 2008 Michal Simek
* Copyright (C) 2007 - 2008 PetaLogix
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2007-2009 PetaLogix
* Copyright (C) 2007 John Williams <john.williams@petalogix.com>
*
* This file is subject to the terms and conditions of the GNU General
......@@ -31,7 +31,40 @@ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
# endif /* __ASSEMBLY__ */
#ifndef CONFIG_MMU
/* noMMU hasn't any space for args */
# define STATE_SAVE_ARG_SPACE (0)
#else /* CONFIG_MMU */
/* If true, system calls save and restore all registers (except result
* registers, of course). If false, then `call clobbered' registers
* will not be preserved, on the theory that system calls are basically
* function calls anyway, and the caller should be able to deal with it.
* This is a security risk, of course, as `internal' values may leak out
* after a system call, but that certainly doesn't matter very much for
* a processor with no MMU protection! For a protected-mode kernel, it
* would be faster to just zero those registers before returning.
*
* I can not rely on the glibc implementation. If you turn it off make
* sure that r11/r12 is saved in user-space. --KAA
*
* These are special variables using by the kernel trap/interrupt code
* to save registers in, at a time when there are no spare registers we
* can use to do so, and we can't depend on the value of the stack
* pointer. This means that they must be within a signed 16-bit
* displacement of 0x00000000.
*/
/* A `state save frame' is a struct pt_regs preceded by some extra space
* suitable for a function call stack frame. */
/* Amount of room on the stack reserved for arguments and to satisfy the
* C calling conventions, in addition to the space used by the struct
* pt_regs that actually holds saved values. */
#define STATE_SAVE_ARG_SPACE (6*4) /* Up to six arguments */
#endif /* CONFIG_MMU */
#endif /* _ASM_MICROBLAZE_ENTRY_H */
arch/microblaze/include/asm/exceptions.h
浏览文件 @ 02a99ed6
/*
* Preliminary support for HW exception handing for Microblaze
*
* Copyright (C) 2008 Michal Simek
* Copyright (C) 2008 PetaLogix
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2005 John Williams <jwilliams@itee.uq.edu.au>
*
* This file is subject to the terms and conditions of the GNU General
......@@ -64,21 +64,13 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
void die(const char *str, struct pt_regs *fp, long err);
void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
#if defined(CONFIG_XMON)
extern void xmon(struct pt_regs *regs);
extern int xmon_bpt(struct pt_regs *regs);
extern int xmon_sstep(struct pt_regs *regs);
extern int xmon_iabr_match(struct pt_regs *regs);
extern int xmon_dabr_match(struct pt_regs *regs);
extern void (*xmon_fault_handler)(struct pt_regs *regs);
#ifdef CONFIG_MMU
void __bug(const char *file, int line, void *data);
int bad_trap(int trap_num, struct pt_regs *regs);
int debug_trap(struct pt_regs *regs);
#endif /* CONFIG_MMU */
void (*debugger)(struct pt_regs *regs) = xmon;
int (*debugger_bpt)(struct pt_regs *regs) = xmon_bpt;
int (*debugger_sstep)(struct pt_regs *regs) = xmon_sstep;
int (*debugger_iabr_match)(struct pt_regs *regs) = xmon_iabr_match;
int (*debugger_dabr_match)(struct pt_regs *regs) = xmon_dabr_match;
void (*debugger_fault_handler)(struct pt_regs *regs);
#elif defined(CONFIG_KGDB)
#if defined(CONFIG_KGDB)
void (*debugger)(struct pt_regs *regs);
int (*debugger_bpt)(struct pt_regs *regs);
int (*debugger_sstep)(struct pt_regs *regs);
......
arch/microblaze/include/asm/flat.h
浏览文件 @ 02a99ed6
......@@ -13,7 +13,6 @@
#include <asm/unaligned.h>
#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
......
arch/microblaze/include/asm/gpio.h
浏览文件 @ 02a99ed6
......@@ -11,8 +11,8 @@
* (at your option) any later version.
*/
#ifndef __ASM_POWERPC_GPIO_H
#define __ASM_POWERPC_GPIO_H
#ifndef _ASM_MICROBLAZE_GPIO_H
#define _ASM_MICROBLAZE_GPIO_H
#include <linux/errno.h>
#include <asm-generic/gpio.h>
......@@ -53,4 +53,4 @@ static inline int irq_to_gpio(unsigned int irq)
#endif /* CONFIG_GPIOLIB */
#endif /* __ASM_POWERPC_GPIO_H */
#endif /* _ASM_MICROBLAZE_GPIO_H */
arch/microblaze/include/asm/io.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2007-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
......@@ -12,6 +14,9 @@
#include <asm/byteorder.h>
#include <asm/page.h>
#include <linux/types.h>
#include <asm/byteorder.h>
#include <linux/mm.h> /* Get struct page {...} */
#define IO_SPACE_LIMIT (0xFFFFFFFF)
......@@ -112,6 +117,30 @@ static inline void writel(unsigned int v, volatile void __iomem *addr)
#define memcpy_fromio(a, b, c) memcpy((a), (void *)(b), (c))
#define memcpy_toio(a, b, c) memcpy((void *)(a), (b), (c))
#ifdef CONFIG_MMU
#define mm_ptov(addr) ((void *)__phys_to_virt(addr))
#define mm_vtop(addr) ((unsigned long)__virt_to_phys(addr))
#define phys_to_virt(addr) ((void *)__phys_to_virt(addr))
#define virt_to_phys(addr) ((unsigned long)__virt_to_phys(addr))
#define virt_to_bus(addr) ((unsigned long)__virt_to_phys(addr))
#define __page_address(page) \
(PAGE_OFFSET + (((page) - mem_map) << PAGE_SHIFT))
#define page_to_phys(page) virt_to_phys((void *)__page_address(page))
#define page_to_bus(page) (page_to_phys(page))
#define bus_to_virt(addr) (phys_to_virt(addr))
extern void iounmap(void *addr);
/*extern void *__ioremap(phys_addr_t address, unsigned long size,
unsigned long flags);*/
extern void __iomem *ioremap(phys_addr_t address, unsigned long size);
#define ioremap_writethrough(addr, size) ioremap((addr), (size))
#define ioremap_nocache(addr, size) ioremap((addr), (size))
#define ioremap_fullcache(addr, size) ioremap((addr), (size))
#else /* CONFIG_MMU */
/**
* virt_to_phys - map virtual addresses to physical
* @address: address to remap
......@@ -160,6 +189,8 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size,
#define iounmap(addr) ((void)0)
#define ioremap_nocache(physaddr, size) ioremap(physaddr, size)
#endif /* CONFIG_MMU */
/*
* Convert a physical pointer to a virtual kernel pointer for /dev/mem
* access
......
arch/microblaze/include/asm/mmu.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
......@@ -9,11 +11,109 @@
#ifndef _ASM_MICROBLAZE_MMU_H
#define _ASM_MICROBLAZE_MMU_H
#ifndef __ASSEMBLY__
# ifndef CONFIG_MMU
# ifndef __ASSEMBLY__
typedef struct {
struct vm_list_struct *vmlist;
unsigned long end_brk;
} mm_context_t;
#endif /* __ASSEMBLY__ */
# endif /* __ASSEMBLY__ */
# else /* CONFIG_MMU */
# ifdef __KERNEL__
# ifndef __ASSEMBLY__
/* Default "unsigned long" context */
typedef unsigned long mm_context_t;
/* Hardware Page Table Entry */
typedef struct _PTE {
unsigned long v:1; /* Entry is valid */
unsigned long vsid:24; /* Virtual segment identifier */
unsigned long h:1; /* Hash algorithm indicator */
unsigned long api:6; /* Abbreviated page index */
unsigned long rpn:20; /* Real (physical) page number */
unsigned long :3; /* Unused */
unsigned long r:1; /* Referenced */
unsigned long c:1; /* Changed */
unsigned long w:1; /* Write-thru cache mode */
unsigned long i:1; /* Cache inhibited */
unsigned long m:1; /* Memory coherence */
unsigned long g:1; /* Guarded */
unsigned long :1; /* Unused */
unsigned long pp:2; /* Page protection */
} PTE;
/* Values for PP (assumes Ks=0, Kp=1) */
# define PP_RWXX 0 /* Supervisor read/write, User none */
# define PP_RWRX 1 /* Supervisor read/write, User read */
# define PP_RWRW 2 /* Supervisor read/write, User read/write */
# define PP_RXRX 3 /* Supervisor read, User read */
/* Segment Register */
typedef struct _SEGREG {
unsigned long t:1; /* Normal or I/O type */
unsigned long ks:1; /* Supervisor 'key' (normally 0) */
unsigned long kp:1; /* User 'key' (normally 1) */
unsigned long n:1; /* No-execute */
unsigned long :4; /* Unused */
unsigned long vsid:24; /* Virtual Segment Identifier */
} SEGREG;
extern void _tlbie(unsigned long va); /* invalidate a TLB entry */
extern void _tlbia(void); /* invalidate all TLB entries */
# endif /* __ASSEMBLY__ */
/*
* The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
* instruction and data sides share a unified, 64-entry, semi-associative
* TLB which is maintained totally under software control. In addition, the
* instruction side has a hardware-managed, 2,4, or 8-entry, fully-associative
* TLB which serves as a first level to the shared TLB. These two TLBs are
* known as the UTLB and ITLB, respectively.
*/
# define MICROBLAZE_TLB_SIZE 64
/*
* TLB entries are defined by a "high" tag portion and a "low" data
* portion. The data portion is 32-bits.
*
* TLB entries are managed entirely under software control by reading,
* writing, and searching using the MTS and MFS instructions.
*/
# define TLB_LO 1
# define TLB_HI 0
# define TLB_DATA TLB_LO
# define TLB_TAG TLB_HI
/* Tag portion */
# define TLB_EPN_MASK 0xFFFFFC00 /* Effective Page Number */
# define TLB_PAGESZ_MASK 0x00000380
# define TLB_PAGESZ(x) (((x) & 0x7) << 7)
# define PAGESZ_1K 0
# define PAGESZ_4K 1
# define PAGESZ_16K 2
# define PAGESZ_64K 3
# define PAGESZ_256K 4
# define PAGESZ_1M 5
# define PAGESZ_4M 6
# define PAGESZ_16M 7
# define TLB_VALID 0x00000040 /* Entry is valid */
/* Data portion */
# define TLB_RPN_MASK 0xFFFFFC00 /* Real Page Number */
# define TLB_PERM_MASK 0x00000300
# define TLB_EX 0x00000200 /* Instruction execution allowed */
# define TLB_WR 0x00000100 /* Writes permitted */
# define TLB_ZSEL_MASK 0x000000F0
# define TLB_ZSEL(x) (((x) & 0xF) << 4)
# define TLB_ATTR_MASK 0x0000000F
# define TLB_W 0x00000008 /* Caching is write-through */
# define TLB_I 0x00000004 /* Caching is inhibited */
# define TLB_M 0x00000002 /* Memory is coherent */
# define TLB_G 0x00000001 /* Memory is guarded from prefetch */
# endif /* __KERNEL__ */
# endif /* CONFIG_MMU */
#endif /* _ASM_MICROBLAZE_MMU_H */
arch/microblaze/include/asm/mmu_context.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
#define _ASM_MICROBLAZE_MMU_CONTEXT_H
# define init_new_context(tsk, mm) ({ 0; })
# define enter_lazy_tlb(mm, tsk) do {} while (0)
# define change_mm_context(old, ctx, _pml4) do {} while (0)
# define destroy_context(mm) do {} while (0)
# define deactivate_mm(tsk, mm) do {} while (0)
# define switch_mm(prev, next, tsk) do {} while (0)
# define activate_mm(prev, next) do {} while (0)
#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
#ifdef CONFIG_MMU
# include "mmu_context_mm.h"
#else
# include "mmu_context_no.h"
#endif
arch/microblaze/include/asm/mmu_context_mm.h 0 → 100644
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
#define _ASM_MICROBLAZE_MMU_CONTEXT_H
#include <asm/atomic.h>
#include <asm/bitops.h>
#include <asm/mmu.h>
#include <asm-generic/mm_hooks.h>
# ifdef __KERNEL__
/*
* This function defines the mapping from contexts to VSIDs (virtual
* segment IDs). We use a skew on both the context and the high 4 bits
* of the 32-bit virtual address (the "effective segment ID") in order
* to spread out the entries in the MMU hash table.
*/
# define CTX_TO_VSID(ctx, va) (((ctx) * (897 * 16) + ((va) >> 28) * 0x111) \
& 0xffffff)
/*
MicroBlaze has 256 contexts, so we can just rotate through these
as a way of "switching" contexts. If the TID of the TLB is zero,
the PID/TID comparison is disabled, so we can use a TID of zero
to represent all kernel pages as shared among all contexts.
*/
static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
{
}
# define NO_CONTEXT 256
# define LAST_CONTEXT 255
# define FIRST_CONTEXT 1
/*
* Set the current MMU context.
* This is done byloading up the segment registers for the user part of the
* address space.
*
* Since the PGD is immediately available, it is much faster to simply
* pass this along as a second parameter, which is required for 8xx and
* can be used for debugging on all processors (if you happen to have
* an Abatron).
*/
extern void set_context(mm_context_t context, pgd_t *pgd);
/*
* Bitmap of contexts in use.
* The size of this bitmap is LAST_CONTEXT + 1 bits.
*/
extern unsigned long context_map[];
/*
* This caches the next context number that we expect to be free.
* Its use is an optimization only, we can't rely on this context
* number to be free, but it usually will be.
*/
extern mm_context_t next_mmu_context;
/*
* Since we don't have sufficient contexts to give one to every task
* that could be in the system, we need to be able to steal contexts.
* These variables support that.
*/
extern atomic_t nr_free_contexts;
extern struct mm_struct *context_mm[LAST_CONTEXT+1];
extern void steal_context(void);
/*
* Get a new mmu context for the address space described by `mm'.
*/
static inline void get_mmu_context(struct mm_struct *mm)
{
mm_context_t ctx;
if (mm->context != NO_CONTEXT)
return;
while (atomic_dec_if_positive(&nr_free_contexts) < 0)
steal_context();
ctx = next_mmu_context;
while (test_and_set_bit(ctx, context_map)) {
ctx = find_next_zero_bit(context_map, LAST_CONTEXT+1, ctx);
if (ctx > LAST_CONTEXT)
ctx = 0;
}
next_mmu_context = (ctx + 1) & LAST_CONTEXT;
mm->context = ctx;
context_mm[ctx] = mm;
}
/*
* Set up the context for a new address space.
*/
# define init_new_context(tsk, mm) (((mm)->context = NO_CONTEXT), 0)
/*
* We're finished using the context for an address space.
*/
static inline void destroy_context(struct mm_struct *mm)
{
if (mm->context != NO_CONTEXT) {
clear_bit(mm->context, context_map);
mm->context = NO_CONTEXT;
atomic_inc(&nr_free_contexts);
}
}
static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
struct task_struct *tsk)
{
tsk->thread.pgdir = next->pgd;
get_mmu_context(next);
set_context(next->context, next->pgd);
}
/*
* After we have set current->mm to a new value, this activates
* the context for the new mm so we see the new mappings.
*/
static inline void activate_mm(struct mm_struct *active_mm,
struct mm_struct *mm)
{
current->thread.pgdir = mm->pgd;
get_mmu_context(mm);
set_context(mm->context, mm->pgd);
}
extern void mmu_context_init(void);
# endif /* __KERNEL__ */
#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
arch/microblaze/include/asm/mmu_context_no.h 0 → 100644
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
#ifndef _ASM_MICROBLAZE_MMU_CONTEXT_H
#define _ASM_MICROBLAZE_MMU_CONTEXT_H
# define init_new_context(tsk, mm) ({ 0; })
# define enter_lazy_tlb(mm, tsk) do {} while (0)
# define change_mm_context(old, ctx, _pml4) do {} while (0)
# define destroy_context(mm) do {} while (0)
# define deactivate_mm(tsk, mm) do {} while (0)
# define switch_mm(prev, next, tsk) do {} while (0)
# define activate_mm(prev, next) do {} while (0)
#endif /* _ASM_MICROBLAZE_MMU_CONTEXT_H */
arch/microblaze/include/asm/page.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2008 Michal Simek
* Copyright (C) 2008 PetaLogix
* VM ops
*
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
* Changes for MMU support:
* Copyright (C) 2007 Xilinx, Inc. All rights reserved.
......@@ -15,14 +17,15 @@
#include <linux/pfn.h>
#include <asm/setup.h>
#include <linux/const.h>
#ifdef __KERNEL__
/* PAGE_SHIFT determines the page size */
#define PAGE_SHIFT (12)
#define PAGE_SIZE (1UL << PAGE_SHIFT)
#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
#define PAGE_MASK (~(PAGE_SIZE-1))
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
#define PAGE_UP(addr) (((addr)+((PAGE_SIZE)-1))&(~((PAGE_SIZE)-1)))
......@@ -35,6 +38,7 @@
/* align addr on a size boundary - adjust address up if needed */
#define _ALIGN(addr, size) _ALIGN_UP(addr, size)
#ifndef CONFIG_MMU
/*
* PAGE_OFFSET -- the first address of the first page of memory. When not
* using MMU this corresponds to the first free page in physical memory (aligned
......@@ -43,15 +47,44 @@
extern unsigned int __page_offset;
#define PAGE_OFFSET __page_offset
#define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
#define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
#define free_user_page(page, addr) free_page(addr)
#else /* CONFIG_MMU */
#define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE)
/*
* PAGE_OFFSET -- the first address of the first page of memory. With MMU
* it is set to the kernel start address (aligned on a page boundary).
*
* CONFIG_KERNEL_START is defined in arch/microblaze/config.in and used
* in arch/microblaze/Makefile.
*/
#define PAGE_OFFSET CONFIG_KERNEL_START
/*
* MAP_NR -- given an address, calculate the index of the page struct which
* points to the address's page.
*/
#define MAP_NR(addr) (((unsigned long)(addr) - PAGE_OFFSET) >> PAGE_SHIFT)
#define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE)
#define copy_user_page(vto, vfrom, vaddr, topg) \
/*
* The basic type of a PTE - 32 bit physical addressing.
*/
typedef unsigned long pte_basic_t;
#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */
#define PTE_FMT "%.8lx"
#endif /* CONFIG_MMU */
# ifndef CONFIG_MMU
# define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
# define get_user_page(vaddr) __get_free_page(GFP_KERNEL)
# define free_user_page(page, addr) free_page(addr)
# else /* CONFIG_MMU */
extern void copy_page(void *to, void *from);
# endif /* CONFIG_MMU */
# define clear_page(pgaddr) memset((pgaddr), 0, PAGE_SIZE)
# define clear_user_page(pgaddr, vaddr, page) memset((pgaddr), 0, PAGE_SIZE)
# define copy_user_page(vto, vfrom, vaddr, topg) \
memcpy((vto), (vfrom), PAGE_SIZE)
/*
......@@ -60,21 +93,32 @@ extern unsigned int __page_offset;
typedef struct page *pgtable_t;
typedef struct { unsigned long pte; } pte_t;
typedef struct { unsigned long pgprot; } pgprot_t;
/* FIXME this can depend on linux kernel version */
# ifdef CONFIG_MMU
typedef struct { unsigned long pmd; } pmd_t;
typedef struct { unsigned long pgd; } pgd_t;
# else /* CONFIG_MMU */
typedef struct { unsigned long ste[64]; } pmd_t;
typedef struct { pmd_t pue[1]; } pud_t;
typedef struct { pud_t pge[1]; } pgd_t;
# endif /* CONFIG_MMU */
# define pte_val(x) ((x).pte)
# define pgprot_val(x) ((x).pgprot)
#define pte_val(x) ((x).pte)
#define pgprot_val(x) ((x).pgprot)
#define pmd_val(x) ((x).ste[0])
#define pud_val(x) ((x).pue[0])
#define pgd_val(x) ((x).pge[0])
# ifdef CONFIG_MMU
# define pmd_val(x) ((x).pmd)
# define pgd_val(x) ((x).pgd)
# else /* CONFIG_MMU */
# define pmd_val(x) ((x).ste[0])
# define pud_val(x) ((x).pue[0])
# define pgd_val(x) ((x).pge[0])
# endif /* CONFIG_MMU */
#define __pte(x) ((pte_t) { (x) })
#define __pmd(x) ((pmd_t) { (x) })
#define __pgd(x) ((pgd_t) { (x) })
#define __pgprot(x) ((pgprot_t) { (x) })
# define __pte(x) ((pte_t) { (x) })
# define __pmd(x) ((pmd_t) { (x) })
# define __pgd(x) ((pgd_t) { (x) })
# define __pgprot(x) ((pgprot_t) { (x) })
/**
* Conversions for virtual address, physical address, pfn, and struct
......@@ -94,44 +138,80 @@ extern unsigned long max_low_pfn;
extern unsigned long min_low_pfn;
extern unsigned long max_pfn;
#define __pa(vaddr) ((unsigned long) (vaddr))
#define __va(paddr) ((void *) (paddr))
extern unsigned long memory_start;
extern unsigned long memory_end;
extern unsigned long memory_size;
#define phys_to_pfn(phys) (PFN_DOWN(phys))
#define pfn_to_phys(pfn) (PFN_PHYS(pfn))
extern int page_is_ram(unsigned long pfn);
#define virt_to_pfn(vaddr) (phys_to_pfn((__pa(vaddr))))
#define pfn_to_virt(pfn) __va(pfn_to_phys((pfn)))
# define phys_to_pfn(phys) (PFN_DOWN(phys))
# define pfn_to_phys(pfn) (PFN_PHYS(pfn))
#define virt_to_page(vaddr) (pfn_to_page(virt_to_pfn(vaddr)))
#define page_to_virt(page) (pfn_to_virt(page_to_pfn(page)))
# define virt_to_pfn(vaddr) (phys_to_pfn((__pa(vaddr))))
# define pfn_to_virt(pfn) __va(pfn_to_phys((pfn)))
#define page_to_phys(page) (pfn_to_phys(page_to_pfn(page)))
#define page_to_bus(page) (page_to_phys(page))
#define phys_to_page(paddr) (pfn_to_page(phys_to_pfn(paddr)))
# ifdef CONFIG_MMU
# define virt_to_page(kaddr) (mem_map + MAP_NR(kaddr))
# else /* CONFIG_MMU */
# define virt_to_page(vaddr) (pfn_to_page(virt_to_pfn(vaddr)))
# define page_to_virt(page) (pfn_to_virt(page_to_pfn(page)))
# define page_to_phys(page) (pfn_to_phys(page_to_pfn(page)))
# define page_to_bus(page) (page_to_phys(page))
# define phys_to_page(paddr) (pfn_to_page(phys_to_pfn(paddr)))
# endif /* CONFIG_MMU */
extern unsigned int memory_start;
extern unsigned int memory_end;
extern unsigned int memory_size;
# ifndef CONFIG_MMU
# define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) <= max_mapnr)
# define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT)
# else /* CONFIG_MMU */
# define ARCH_PFN_OFFSET (memory_start >> PAGE_SHIFT)
# define pfn_valid(pfn) ((pfn) < (max_mapnr + ARCH_PFN_OFFSET))
# define VALID_PAGE(page) ((page - mem_map) < max_mapnr)
# endif /* CONFIG_MMU */
#define pfn_valid(pfn) ((pfn) >= min_low_pfn && (pfn) < max_mapnr)
# endif /* __ASSEMBLY__ */
#define ARCH_PFN_OFFSET (PAGE_OFFSET >> PAGE_SHIFT)
#define virt_addr_valid(vaddr) (pfn_valid(virt_to_pfn(vaddr)))
#else
#define tophys(rd, rs) (addik rd, rs, 0)
#define tovirt(rd, rs) (addik rd, rs, 0)
#endif /* __ASSEMBLY__ */
#define virt_addr_valid(vaddr) (pfn_valid(virt_to_pfn(vaddr)))
# ifndef CONFIG_MMU
# define __pa(vaddr) ((unsigned long) (vaddr))
# define __va(paddr) ((void *) (paddr))
# else /* CONFIG_MMU */
# define __pa(x) __virt_to_phys((unsigned long)(x))
# define __va(x) ((void *)__phys_to_virt((unsigned long)(x)))
# endif /* CONFIG_MMU */
/* Convert between virtual and physical address for MMU. */
/* Handle MicroBlaze processor with virtual memory. */
/* Convert between virtual and physical address for MMU. */
/* Handle MicroBlaze processor with virtual memory. */
#ifndef CONFIG_MMU
#define __virt_to_phys(addr) addr
#define __phys_to_virt(addr) addr
#define tophys(rd, rs) addik rd, rs, 0
#define tovirt(rd, rs) addik rd, rs, 0
#else
#define __virt_to_phys(addr) \
((addr) + CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
#define __phys_to_virt(addr) \
((addr) + CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
#define tophys(rd, rs) \
addik rd, rs, (CONFIG_KERNEL_BASE_ADDR - CONFIG_KERNEL_START)
#define tovirt(rd, rs) \
addik rd, rs, (CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
#endif /* CONFIG_MMU */
#define TOPHYS(addr) __virt_to_phys(addr)
#ifdef CONFIG_MMU
#ifdef CONFIG_CONTIGUOUS_PAGE_ALLOC
#define WANT_PAGE_VIRTUAL 1 /* page alloc 2 relies on this */
#endif
#define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
#endif /* CONFIG_MMU */
#endif /* __KERNEL__ */
#include <asm-generic/memory_model.h>
......
arch/microblaze/include/asm/pgalloc.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
......@@ -9,6 +11,195 @@
#ifndef _ASM_MICROBLAZE_PGALLOC_H
#define _ASM_MICROBLAZE_PGALLOC_H
#ifdef CONFIG_MMU
#include <linux/kernel.h> /* For min/max macros */
#include <linux/highmem.h>
#include <asm/setup.h>
#include <asm/io.h>
#include <asm/page.h>
#include <asm/cache.h>
#define PGDIR_ORDER 0
/*
* This is handled very differently on MicroBlaze since out page tables
* are all 0's and I want to be able to use these zero'd pages elsewhere
* as well - it gives us quite a speedup.
* -- Cort
*/
extern struct pgtable_cache_struct {
unsigned long *pgd_cache;
unsigned long *pte_cache;
unsigned long pgtable_cache_sz;
} quicklists;
#define pgd_quicklist (quicklists.pgd_cache)
#define pmd_quicklist ((unsigned long *)0)
#define pte_quicklist (quicklists.pte_cache)
#define pgtable_cache_size (quicklists.pgtable_cache_sz)
extern unsigned long *zero_cache; /* head linked list of pre-zero'd pages */
extern atomic_t zero_sz; /* # currently pre-zero'd pages */
extern atomic_t zeropage_hits; /* # zero'd pages request that we've done */
extern atomic_t zeropage_calls; /* # zero'd pages request that've been made */
extern atomic_t zerototal; /* # pages zero'd over time */
#define zero_quicklist (zero_cache)
#define zero_cache_sz (zero_sz)
#define zero_cache_calls (zeropage_calls)
#define zero_cache_hits (zeropage_hits)
#define zero_cache_total (zerototal)
/*
* return a pre-zero'd page from the list,
* return NULL if none available -- Cort
*/
extern unsigned long get_zero_page_fast(void);
extern void __bad_pte(pmd_t *pmd);
extern inline pgd_t *get_pgd_slow(void)
{
pgd_t *ret;
ret = (pgd_t *)__get_free_pages(GFP_KERNEL, PGDIR_ORDER);
if (ret != NULL)
clear_page(ret);
return ret;
}
extern inline pgd_t *get_pgd_fast(void)
{
unsigned long *ret;
ret = pgd_quicklist;
if (ret != NULL) {
pgd_quicklist = (unsigned long *)(*ret);
ret[0] = 0;
pgtable_cache_size--;
} else
ret = (unsigned long *)get_pgd_slow();
return (pgd_t *)ret;
}
extern inline void free_pgd_fast(pgd_t *pgd)
{
*(unsigned long **)pgd = pgd_quicklist;
pgd_quicklist = (unsigned long *) pgd;
pgtable_cache_size++;
}
extern inline void free_pgd_slow(pgd_t *pgd)
{
free_page((unsigned long)pgd);
}
#define pgd_free(mm, pgd) free_pgd_fast(pgd)
#define pgd_alloc(mm) get_pgd_fast()
#define pmd_pgtable(pmd) pmd_page(pmd)
/*
* We don't have any real pmd's, and this code never triggers because
* the pgd will always be present..
*/
#define pmd_alloc_one_fast(mm, address) ({ BUG(); ((pmd_t *)1); })
#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); })
/* FIXME two definition - look below */
#define pmd_free(mm, x) do { } while (0)
#define pgd_populate(mm, pmd, pte) BUG()
static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
unsigned long address)
{
pte_t *pte;
extern int mem_init_done;
extern void *early_get_page(void);
if (mem_init_done) {
pte = (pte_t *)__get_free_page(GFP_KERNEL |
__GFP_REPEAT | __GFP_ZERO);
} else {
pte = (pte_t *)early_get_page();
if (pte)
clear_page(pte);
}
return pte;
}
static inline struct page *pte_alloc_one(struct mm_struct *mm,
unsigned long address)
{
struct page *ptepage;
#ifdef CONFIG_HIGHPTE
int flags = GFP_KERNEL | __GFP_HIGHMEM | __GFP_REPEAT;
#else
int flags = GFP_KERNEL | __GFP_REPEAT;
#endif
ptepage = alloc_pages(flags, 0);
if (ptepage)
clear_highpage(ptepage);
return ptepage;
}
static inline pte_t *pte_alloc_one_fast(struct mm_struct *mm,
unsigned long address)
{
unsigned long *ret;
ret = pte_quicklist;
if (ret != NULL) {
pte_quicklist = (unsigned long *)(*ret);
ret[0] = 0;
pgtable_cache_size--;
}
return (pte_t *)ret;
}
extern inline void pte_free_fast(pte_t *pte)
{
*(unsigned long **)pte = pte_quicklist;
pte_quicklist = (unsigned long *) pte;
pgtable_cache_size++;
}
extern inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
{
free_page((unsigned long)pte);
}
extern inline void pte_free_slow(struct page *ptepage)
{
__free_page(ptepage);
}
extern inline void pte_free(struct mm_struct *mm, struct page *ptepage)
{
__free_page(ptepage);
}
#define __pte_free_tlb(tlb, pte) pte_free((tlb)->mm, (pte))
#define pmd_populate(mm, pmd, pte) (pmd_val(*(pmd)) = page_address(pte))
#define pmd_populate_kernel(mm, pmd, pte) \
(pmd_val(*(pmd)) = (unsigned long) (pte))
/*
* We don't have any real pmd's, and this code never triggers because
* the pgd will always be present..
*/
#define pmd_alloc_one(mm, address) ({ BUG(); ((pmd_t *)2); })
/*#define pmd_free(mm, x) do { } while (0)*/
#define __pmd_free_tlb(tlb, x) do { } while (0)
#define pgd_populate(mm, pmd, pte) BUG()
extern int do_check_pgt_cache(int, int);
#endif /* CONFIG_MMU */
#define check_pgt_cache() do {} while (0)
#endif /* _ASM_MICROBLAZE_PGALLOC_H */
arch/microblaze/include/asm/pgtable.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
......@@ -14,6 +16,8 @@
#define io_remap_pfn_range(vma, vaddr, pfn, size, prot) \
remap_pfn_range(vma, vaddr, pfn, size, prot)
#ifndef CONFIG_MMU
#define pgd_present(pgd) (1) /* pages are always present on non MMU */
#define pgd_none(pgd) (0)
#define pgd_bad(pgd) (0)
......@@ -27,6 +31,8 @@
#define PAGE_READONLY __pgprot(0) /* these mean nothing to non MMU */
#define PAGE_KERNEL __pgprot(0) /* these mean nothing to non MMU */
#define pgprot_noncached(x) (x)
#define __swp_type(x) (0)
#define __swp_offset(x) (0)
#define __swp_entry(typ, off) ((swp_entry_t) { ((typ) | ((off) << 7)) })
......@@ -45,6 +51,538 @@ static inline int pte_file(pte_t pte) { return 0; }
#define arch_enter_lazy_cpu_mode() do {} while (0)
#else /* CONFIG_MMU */
#include <asm-generic/4level-fixup.h>
#ifdef __KERNEL__
#ifndef __ASSEMBLY__
#include <linux/sched.h>
#include <linux/threads.h>
#include <asm/processor.h> /* For TASK_SIZE */
#include <asm/mmu.h>
#include <asm/page.h>
#define FIRST_USER_ADDRESS 0
extern unsigned long va_to_phys(unsigned long address);
extern pte_t *va_to_pte(unsigned long address);
extern unsigned long ioremap_bot, ioremap_base;
/*
* The following only work if pte_present() is true.
* Undefined behaviour if not..
*/
static inline int pte_special(pte_t pte) { return 0; }
static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
/* Start and end of the vmalloc area. */
/* Make sure to map the vmalloc area above the pinned kernel memory area
of 32Mb. */
#define VMALLOC_START (CONFIG_KERNEL_START + \
max(32 * 1024 * 1024UL, memory_size))
#define VMALLOC_END ioremap_bot
#define VMALLOC_VMADDR(x) ((unsigned long)(x))
#endif /* __ASSEMBLY__ */
/*
* The MicroBlaze MMU is identical to the PPC-40x MMU, and uses a hash
* table containing PTEs, together with a set of 16 segment registers, to
* define the virtual to physical address mapping.
*
* We use the hash table as an extended TLB, i.e. a cache of currently
* active mappings. We maintain a two-level page table tree, much
* like that used by the i386, for the sake of the Linux memory
* management code. Low-level assembler code in hashtable.S
* (procedure hash_page) is responsible for extracting ptes from the
* tree and putting them into the hash table when necessary, and
* updating the accessed and modified bits in the page table tree.
*/
/*
* The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
* instruction and data sides share a unified, 64-entry, semi-associative
* TLB which is maintained totally under software control. In addition, the
* instruction side has a hardware-managed, 2,4, or 8-entry, fully-associative
* TLB which serves as a first level to the shared TLB. These two TLBs are
* known as the UTLB and ITLB, respectively (see "mmu.h" for definitions).
*/
/*
* The normal case is that PTEs are 32-bits and we have a 1-page
* 1024-entry pgdir pointing to 1-page 1024-entry PTE pages. -- paulus
*
*/
/* PMD_SHIFT determines the size of the area mapped by the PTE pages */
#define PMD_SHIFT (PAGE_SHIFT + PTE_SHIFT)
#define PMD_SIZE (1UL << PMD_SHIFT)
#define PMD_MASK (~(PMD_SIZE-1))
/* PGDIR_SHIFT determines what a top-level page table entry can map */
#define PGDIR_SHIFT PMD_SHIFT
#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE-1))
/*
* entries per page directory level: our page-table tree is two-level, so
* we don't really have any PMD directory.
*/
#define PTRS_PER_PTE (1 << PTE_SHIFT)
#define PTRS_PER_PMD 1
#define PTRS_PER_PGD (1 << (32 - PGDIR_SHIFT))
#define USER_PTRS_PER_PGD (TASK_SIZE / PGDIR_SIZE)
#define FIRST_USER_PGD_NR 0
#define USER_PGD_PTRS (PAGE_OFFSET >> PGDIR_SHIFT)
#define KERNEL_PGD_PTRS (PTRS_PER_PGD-USER_PGD_PTRS)
#define pte_ERROR(e) \
printk(KERN_ERR "%s:%d: bad pte "PTE_FMT".\n", \
__FILE__, __LINE__, pte_val(e))
#define pmd_ERROR(e) \
printk(KERN_ERR "%s:%d: bad pmd %08lx.\n", \
__FILE__, __LINE__, pmd_val(e))
#define pgd_ERROR(e) \
printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
__FILE__, __LINE__, pgd_val(e))
/*
* Bits in a linux-style PTE. These match the bits in the
* (hardware-defined) PTE as closely as possible.
*/
/* There are several potential gotchas here. The hardware TLBLO
* field looks like this:
*
* 0 1 2 3 4 ... 18 19 20 21 22 23 24 25 26 27 28 29 30 31
* RPN..................... 0 0 EX WR ZSEL....... W I M G
*
* Where possible we make the Linux PTE bits match up with this
*
* - bits 20 and 21 must be cleared, because we use 4k pages (4xx can
* support down to 1k pages), this is done in the TLBMiss exception
* handler.
* - We use only zones 0 (for kernel pages) and 1 (for user pages)
* of the 16 available. Bit 24-26 of the TLB are cleared in the TLB
* miss handler. Bit 27 is PAGE_USER, thus selecting the correct
* zone.
* - PRESENT *must* be in the bottom two bits because swap cache
* entries use the top 30 bits. Because 4xx doesn't support SMP
* anyway, M is irrelevant so we borrow it for PAGE_PRESENT. Bit 30
* is cleared in the TLB miss handler before the TLB entry is loaded.
* - All other bits of the PTE are loaded into TLBLO without
* * modification, leaving us only the bits 20, 21, 24, 25, 26, 30 for
* software PTE bits. We actually use use bits 21, 24, 25, and
* 30 respectively for the software bits: ACCESSED, DIRTY, RW, and
* PRESENT.
*/
/* Definitions for MicroBlaze. */
#define _PAGE_GUARDED 0x001 /* G: page is guarded from prefetch */
#define _PAGE_PRESENT 0x002 /* software: PTE contains a translation */
#define _PAGE_NO_CACHE 0x004 /* I: caching is inhibited */
#define _PAGE_WRITETHRU 0x008 /* W: caching is write-through */
#define _PAGE_USER 0x010 /* matches one of the zone permission bits */
#define _PAGE_RW 0x040 /* software: Writes permitted */
#define _PAGE_DIRTY 0x080 /* software: dirty page */
#define _PAGE_HWWRITE 0x100 /* hardware: Dirty & RW, set in exception */
#define _PAGE_HWEXEC 0x200 /* hardware: EX permission */
#define _PAGE_ACCESSED 0x400 /* software: R: page referenced */
#define _PMD_PRESENT PAGE_MASK
/*
* Some bits are unused...
*/
#ifndef _PAGE_HASHPTE
#define _PAGE_HASHPTE 0
#endif
#ifndef _PTE_NONE_MASK
#define _PTE_NONE_MASK 0
#endif
#ifndef _PAGE_SHARED
#define _PAGE_SHARED 0
#endif
#ifndef _PAGE_HWWRITE
#define _PAGE_HWWRITE 0
#endif
#ifndef _PAGE_HWEXEC
#define _PAGE_HWEXEC 0
#endif
#ifndef _PAGE_EXEC
#define _PAGE_EXEC 0
#endif
#define _PAGE_CHG_MASK (PAGE_MASK | _PAGE_ACCESSED | _PAGE_DIRTY)
/*
* Note: the _PAGE_COHERENT bit automatically gets set in the hardware
* PTE if CONFIG_SMP is defined (hash_page does this); there is no need
* to have it in the Linux PTE, and in fact the bit could be reused for
* another purpose. -- paulus.
*/
#define _PAGE_BASE (_PAGE_PRESENT | _PAGE_ACCESSED)
#define _PAGE_WRENABLE (_PAGE_RW | _PAGE_DIRTY | _PAGE_HWWRITE)
#define _PAGE_KERNEL \
(_PAGE_BASE | _PAGE_WRENABLE | _PAGE_SHARED | _PAGE_HWEXEC)
#define _PAGE_IO (_PAGE_KERNEL | _PAGE_NO_CACHE | _PAGE_GUARDED)
#define PAGE_NONE __pgprot(_PAGE_BASE)
#define PAGE_READONLY __pgprot(_PAGE_BASE | _PAGE_USER)
#define PAGE_READONLY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
#define PAGE_SHARED __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW)
#define PAGE_SHARED_X \
__pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_RW | _PAGE_EXEC)
#define PAGE_COPY __pgprot(_PAGE_BASE | _PAGE_USER)
#define PAGE_COPY_X __pgprot(_PAGE_BASE | _PAGE_USER | _PAGE_EXEC)
#define PAGE_KERNEL __pgprot(_PAGE_KERNEL)
#define PAGE_KERNEL_RO __pgprot(_PAGE_BASE | _PAGE_SHARED)
#define PAGE_KERNEL_CI __pgprot(_PAGE_IO)
/*
* We consider execute permission the same as read.
* Also, write permissions imply read permissions.
*/
#define __P000 PAGE_NONE
#define __P001 PAGE_READONLY_X
#define __P010 PAGE_COPY
#define __P011 PAGE_COPY_X
#define __P100 PAGE_READONLY
#define __P101 PAGE_READONLY_X
#define __P110 PAGE_COPY
#define __P111 PAGE_COPY_X
#define __S000 PAGE_NONE
#define __S001 PAGE_READONLY_X
#define __S010 PAGE_SHARED
#define __S011 PAGE_SHARED_X
#define __S100 PAGE_READONLY
#define __S101 PAGE_READONLY_X
#define __S110 PAGE_SHARED
#define __S111 PAGE_SHARED_X
#ifndef __ASSEMBLY__
/*
* ZERO_PAGE is a global shared page that is always zero: used
* for zero-mapped memory areas etc..
*/
extern unsigned long empty_zero_page[1024];
#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
#endif /* __ASSEMBLY__ */
#define pte_none(pte) ((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
#define pte_present(pte) (pte_val(pte) & _PAGE_PRESENT)
#define pte_clear(mm, addr, ptep) \
do { set_pte_at((mm), (addr), (ptep), __pte(0)); } while (0)
#define pmd_none(pmd) (!pmd_val(pmd))
#define pmd_bad(pmd) ((pmd_val(pmd) & _PMD_PRESENT) == 0)
#define pmd_present(pmd) ((pmd_val(pmd) & _PMD_PRESENT) != 0)
#define pmd_clear(pmdp) do { pmd_val(*(pmdp)) = 0; } while (0)
#define pte_page(x) (mem_map + (unsigned long) \
((pte_val(x) - memory_start) >> PAGE_SHIFT))
#define PFN_SHIFT_OFFSET (PAGE_SHIFT)
#define pte_pfn(x) (pte_val(x) >> PFN_SHIFT_OFFSET)
#define pfn_pte(pfn, prot) \
__pte(((pte_basic_t)(pfn) << PFN_SHIFT_OFFSET) | pgprot_val(prot))
#ifndef __ASSEMBLY__
/*
* The "pgd_xxx()" functions here are trivial for a folded two-level
* setup: the pgd is never bad, and a pmd always exists (as it's folded
* into the pgd entry)
*/
static inline int pgd_none(pgd_t pgd) { return 0; }
static inline int pgd_bad(pgd_t pgd) { return 0; }
static inline int pgd_present(pgd_t pgd) { return 1; }
#define pgd_clear(xp) do { } while (0)
#define pgd_page(pgd) \
((unsigned long) __va(pgd_val(pgd) & PAGE_MASK))
/*
* The following only work if pte_present() is true.
* Undefined behaviour if not..
*/
static inline int pte_read(pte_t pte) { return pte_val(pte) & _PAGE_USER; }
static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
static inline int pte_exec(pte_t pte) { return pte_val(pte) & _PAGE_EXEC; }
static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
/* FIXME */
static inline int pte_file(pte_t pte) { return 0; }
static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
static inline void pte_cache(pte_t pte) { pte_val(pte) &= ~_PAGE_NO_CACHE; }
static inline pte_t pte_rdprotect(pte_t pte) \
{ pte_val(pte) &= ~_PAGE_USER; return pte; }
static inline pte_t pte_wrprotect(pte_t pte) \
{ pte_val(pte) &= ~(_PAGE_RW | _PAGE_HWWRITE); return pte; }
static inline pte_t pte_exprotect(pte_t pte) \
{ pte_val(pte) &= ~_PAGE_EXEC; return pte; }
static inline pte_t pte_mkclean(pte_t pte) \
{ pte_val(pte) &= ~(_PAGE_DIRTY | _PAGE_HWWRITE); return pte; }
static inline pte_t pte_mkold(pte_t pte) \
{ pte_val(pte) &= ~_PAGE_ACCESSED; return pte; }
static inline pte_t pte_mkread(pte_t pte) \
{ pte_val(pte) |= _PAGE_USER; return pte; }
static inline pte_t pte_mkexec(pte_t pte) \
{ pte_val(pte) |= _PAGE_USER | _PAGE_EXEC; return pte; }
static inline pte_t pte_mkwrite(pte_t pte) \
{ pte_val(pte) |= _PAGE_RW; return pte; }
static inline pte_t pte_mkdirty(pte_t pte) \
{ pte_val(pte) |= _PAGE_DIRTY; return pte; }
static inline pte_t pte_mkyoung(pte_t pte) \
{ pte_val(pte) |= _PAGE_ACCESSED; return pte; }
/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
*/
static inline pte_t mk_pte_phys(phys_addr_t physpage, pgprot_t pgprot)
{
pte_t pte;
pte_val(pte) = physpage | pgprot_val(pgprot);
return pte;
}
#define mk_pte(page, pgprot) \
({ \
pte_t pte; \
pte_val(pte) = (((page - mem_map) << PAGE_SHIFT) + memory_start) | \
pgprot_val(pgprot); \
pte; \
})
static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
{
pte_val(pte) = (pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot);
return pte;
}
/*
* Atomic PTE updates.
*
* pte_update clears and sets bit atomically, and returns
* the old pte value.
* The ((unsigned long)(p+1) - 4) hack is to get to the least-significant
* 32 bits of the PTE regardless of whether PTEs are 32 or 64 bits.
*/
static inline unsigned long pte_update(pte_t *p, unsigned long clr,
unsigned long set)
{
unsigned long old, tmp, msr;
__asm__ __volatile__("\
msrclr %2, 0x2\n\
nop\n\
lw %0, %4, r0\n\
andn %1, %0, %5\n\
or %1, %1, %6\n\
sw %1, %4, r0\n\
mts rmsr, %2\n\
nop"
: "=&r" (old), "=&r" (tmp), "=&r" (msr), "=m" (*p)
: "r" ((unsigned long)(p+1) - 4), "r" (clr), "r" (set), "m" (*p)
: "cc");
return old;
}
/*
* set_pte stores a linux PTE into the linux page table.
*/
static inline void set_pte(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pte)
{
*ptep = pte;
}
static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
pte_t *ptep, pte_t pte)
{
*ptep = pte;
}
static inline int ptep_test_and_clear_young(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
return (pte_update(ptep, _PAGE_ACCESSED, 0) & _PAGE_ACCESSED) != 0;
}
static inline int ptep_test_and_clear_dirty(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
return (pte_update(ptep, \
(_PAGE_DIRTY | _PAGE_HWWRITE), 0) & _PAGE_DIRTY) != 0;
}
static inline pte_t ptep_get_and_clear(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
return __pte(pte_update(ptep, ~_PAGE_HASHPTE, 0));
}
/*static inline void ptep_set_wrprotect(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
pte_update(ptep, (_PAGE_RW | _PAGE_HWWRITE), 0);
}*/
static inline void ptep_mkdirty(struct mm_struct *mm,
unsigned long addr, pte_t *ptep)
{
pte_update(ptep, 0, _PAGE_DIRTY);
}
/*#define pte_same(A,B) (((pte_val(A) ^ pte_val(B)) & ~_PAGE_HASHPTE) == 0)*/
/* Convert pmd entry to page */
/* our pmd entry is an effective address of pte table*/
/* returns effective address of the pmd entry*/
#define pmd_page_kernel(pmd) ((unsigned long) (pmd_val(pmd) & PAGE_MASK))
/* returns struct *page of the pmd entry*/
#define pmd_page(pmd) (pfn_to_page(__pa(pmd_val(pmd)) >> PAGE_SHIFT))
/* to find an entry in a kernel page-table-directory */
#define pgd_offset_k(address) pgd_offset(&init_mm, address)
/* to find an entry in a page-table-directory */
#define pgd_index(address) ((address) >> PGDIR_SHIFT)
#define pgd_offset(mm, address) ((mm)->pgd + pgd_index(address))
/* Find an entry in the second-level page table.. */
static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
{
return (pmd_t *) dir;
}
/* Find an entry in the third-level page table.. */
#define pte_index(address) \
(((address) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1))
#define pte_offset_kernel(dir, addr) \
((pte_t *) pmd_page_kernel(*(dir)) + pte_index(addr))
#define pte_offset_map(dir, addr) \
((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE0) + pte_index(addr))
#define pte_offset_map_nested(dir, addr) \
((pte_t *) kmap_atomic(pmd_page(*(dir)), KM_PTE1) + pte_index(addr))
#define pte_unmap(pte) kunmap_atomic(pte, KM_PTE0)
#define pte_unmap_nested(pte) kunmap_atomic(pte, KM_PTE1)
/* Encode and decode a nonlinear file mapping entry */
#define PTE_FILE_MAX_BITS 29
#define pte_to_pgoff(pte) (pte_val(pte) >> 3)
#define pgoff_to_pte(off) ((pte_t) { ((off) << 3) })
extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
/*
* When flushing the tlb entry for a page, we also need to flush the hash
* table entry. flush_hash_page is assembler (for speed) in hashtable.S.
*/
extern int flush_hash_page(unsigned context, unsigned long va, pte_t *ptep);
/* Add an HPTE to the hash table */
extern void add_hash_page(unsigned context, unsigned long va, pte_t *ptep);
/*
* Encode and decode a swap entry.
* Note that the bits we use in a PTE for representing a swap entry
* must not include the _PAGE_PRESENT bit, or the _PAGE_HASHPTE bit
* (if used). -- paulus
*/
#define __swp_type(entry) ((entry).val & 0x3f)
#define __swp_offset(entry) ((entry).val >> 6)
#define __swp_entry(type, offset) \
((swp_entry_t) { (type) | ((offset) << 6) })
#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) >> 2 })
#define __swp_entry_to_pte(x) ((pte_t) { (x).val << 2 })
/* CONFIG_APUS */
/* For virtual address to physical address conversion */
extern void cache_clear(__u32 addr, int length);
extern void cache_push(__u32 addr, int length);
extern int mm_end_of_chunk(unsigned long addr, int len);
extern unsigned long iopa(unsigned long addr);
/* extern unsigned long mm_ptov(unsigned long addr) \
__attribute__ ((const)); TBD */
/* Values for nocacheflag and cmode */
/* These are not used by the APUS kernel_map, but prevents
* compilation errors.
*/
#define IOMAP_FULL_CACHING 0
#define IOMAP_NOCACHE_SER 1
#define IOMAP_NOCACHE_NONSER 2
#define IOMAP_NO_COPYBACK 3
/*
* Map some physical address range into the kernel address space.
*/
extern unsigned long kernel_map(unsigned long paddr, unsigned long size,
int nocacheflag, unsigned long *memavailp);
/*
* Set cache mode of (kernel space) address range.
*/
extern void kernel_set_cachemode(unsigned long address, unsigned long size,
unsigned int cmode);
/* Needs to be defined here and not in linux/mm.h, as it is arch dependent */
#define kern_addr_valid(addr) (1)
#define io_remap_page_range remap_page_range
/*
* No page table caches to initialise
*/
#define pgtable_cache_init() do { } while (0)
void do_page_fault(struct pt_regs *regs, unsigned long address,
unsigned long error_code);
void __init io_block_mapping(unsigned long virt, phys_addr_t phys,
unsigned int size, int flags);
void __init adjust_total_lowmem(void);
void mapin_ram(void);
int map_page(unsigned long va, phys_addr_t pa, int flags);
extern int mem_init_done;
extern unsigned long ioremap_base;
extern unsigned long ioremap_bot;
asmlinkage void __init mmu_init(void);
void __init *early_get_page(void);
void *consistent_alloc(int gfp, size_t size, dma_addr_t *dma_handle);
void consistent_free(void *vaddr);
void consistent_sync(void *vaddr, size_t size, int direction);
void consistent_sync_page(struct page *page, unsigned long offset,
size_t size, int direction);
#endif /* __ASSEMBLY__ */
#endif /* __KERNEL__ */
#endif /* CONFIG_MMU */
#ifndef __ASSEMBLY__
#include <asm-generic/pgtable.h>
......
arch/microblaze/include/asm/posix_types.h
浏览文件 @ 02a99ed6
......@@ -16,7 +16,7 @@
*/
typedef unsigned long __kernel_ino_t;
typedef unsigned int __kernel_mode_t;
typedef unsigned short __kernel_mode_t;
typedef unsigned int __kernel_nlink_t;
typedef long __kernel_off_t;
typedef int __kernel_pid_t;
......
arch/microblaze/include/asm/processor.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2008 Michal Simek
* Copyright (C) 2008 PetaLogix
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
......@@ -26,14 +26,15 @@ extern const struct seq_operations cpuinfo_op;
# define cpu_sleep() do {} while (0)
# define prepare_to_copy(tsk) do {} while (0)
# endif /* __ASSEMBLY__ */
#define task_pt_regs(tsk) \
(((struct pt_regs *)(THREAD_SIZE + task_stack_page(tsk))) - 1)
/* Do necessary setup to start up a newly executed thread. */
void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp);
# endif /* __ASSEMBLY__ */
# ifndef CONFIG_MMU
/*
* User space process size: memory size
*
......@@ -85,4 +86,90 @@ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
# define KSTK_EIP(tsk) (0)
# define KSTK_ESP(tsk) (0)
# else /* CONFIG_MMU */
/*
* This is used to define STACK_TOP, and with MMU it must be below
* kernel base to select the correct PGD when handling MMU exceptions.
*/
# define TASK_SIZE (CONFIG_KERNEL_START)
/*
* This decides where the kernel will search for a free chunk of vm
* space during mmap's.
*/
# define TASK_UNMAPPED_BASE (TASK_SIZE / 8 * 3)
# define THREAD_KSP 0
# ifndef __ASSEMBLY__
/*
* Default implementation of macro that returns current
* instruction pointer ("program counter").
*/
# define current_text_addr() ({ __label__ _l; _l: &&_l; })
/* If you change this, you must change the associated assembly-languages
* constants defined below, THREAD_*.
*/
struct thread_struct {
/* kernel stack pointer (must be first field in structure) */
unsigned long ksp;
unsigned long ksp_limit; /* if ksp <= ksp_limit stack overflow */
void *pgdir; /* root of page-table tree */
struct pt_regs *regs; /* Pointer to saved register state */
};
# define INIT_THREAD { \
.ksp = sizeof init_stack + (unsigned long)init_stack, \
.pgdir = swapper_pg_dir, \
}
/* Do necessary setup to start up a newly executed thread. */
void start_thread(struct pt_regs *regs,
unsigned long pc, unsigned long usp);
/* Free all resources held by a thread. */
extern inline void release_thread(struct task_struct *dead_task)
{
}
extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags);
/* Free current thread data structures etc. */
static inline void exit_thread(void)
{
}
/* Return saved (kernel) PC of a blocked thread. */
# define thread_saved_pc(tsk) \
((tsk)->thread.regs ? (tsk)->thread.regs->r15 : 0)
unsigned long get_wchan(struct task_struct *p);
/* The size allocated for kernel stacks. This _must_ be a power of two! */
# define KERNEL_STACK_SIZE 0x2000
/* Return some info about the user process TASK. */
# define task_tos(task) ((unsigned long)(task) + KERNEL_STACK_SIZE)
# define task_regs(task) ((struct pt_regs *)task_tos(task) - 1)
# define task_pt_regs_plus_args(tsk) \
(((void *)task_pt_regs(tsk)) - STATE_SAVE_ARG_SPACE)
# define task_sp(task) (task_regs(task)->r1)
# define task_pc(task) (task_regs(task)->pc)
/* Grotty old names for some. */
# define KSTK_EIP(task) (task_pc(task))
# define KSTK_ESP(task) (task_sp(task))
/* FIXME */
# define deactivate_mm(tsk, mm) do { } while (0)
# define STACK_TOP TASK_SIZE
# define STACK_TOP_MAX STACK_TOP
# endif /* __ASSEMBLY__ */
# endif /* CONFIG_MMU */
#endif /* _ASM_MICROBLAZE_PROCESSOR_H */
arch/microblaze/include/asm/ptrace.h
浏览文件 @ 02a99ed6
......@@ -10,7 +10,6 @@
#define _ASM_MICROBLAZE_PTRACE_H
#ifndef __ASSEMBLY__
#include <linux/types.h>
typedef unsigned long microblaze_reg_t;
......
arch/microblaze/include/asm/registers.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2008 Michal Simek
* Copyright (C) 2008 PetaLogix
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
......@@ -30,4 +30,21 @@
#define FSR_UF (1<<1) /* Underflow */
#define FSR_DO (1<<0) /* Denormalized operand error */
# ifdef CONFIG_MMU
/* Machine State Register (MSR) Fields */
# define MSR_UM (1<<11) /* User Mode */
# define MSR_UMS (1<<12) /* User Mode Save */
# define MSR_VM (1<<13) /* Virtual Mode */
# define MSR_VMS (1<<14) /* Virtual Mode Save */
# define MSR_KERNEL (MSR_EE | MSR_VM)
/* # define MSR_USER (MSR_KERNEL | MSR_UM | MSR_IE) */
# define MSR_KERNEL_VMS (MSR_EE | MSR_VMS)
/* # define MSR_USER_VMS (MSR_KERNEL_VMS | MSR_UMS | MSR_IE) */
/* Exception State Register (ESR) Fields */
# define ESR_DIZ (1<<11) /* Zone Protection */
# define ESR_S (1<<10) /* Store instruction */
# endif /* CONFIG_MMU */
#endif /* _ASM_MICROBLAZE_REGISTERS_H */
arch/microblaze/include/asm/sections.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
......@@ -14,6 +16,7 @@
# ifndef __ASSEMBLY__
extern char _ssbss[], _esbss[];
extern unsigned long __ivt_start[], __ivt_end[];
extern char _etext[], _stext[];
# ifdef CONFIG_MTD_UCLINUX
extern char *_ebss;
......
arch/microblaze/include/asm/segment.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2008 Michal Simek
* Copyright (C) 2008 PetaLogix
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
......@@ -11,7 +11,7 @@
#ifndef _ASM_MICROBLAZE_SEGMENT_H
#define _ASM_MICROBLAZE_SEGMENT_H
#ifndef __ASSEMBLY__
# ifndef __ASSEMBLY__
typedef struct {
unsigned long seg;
......@@ -29,15 +29,21 @@ typedef struct {
*
* For non-MMU arch like Microblaze, KERNEL_DS and USER_DS is equal.
*/
# define KERNEL_DS ((mm_segment_t){0})
# define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
# ifndef CONFIG_MMU
# define KERNEL_DS MAKE_MM_SEG(0)
# define USER_DS KERNEL_DS
# else
# define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
# define USER_DS MAKE_MM_SEG(TASK_SIZE - 1)
# endif
# define get_ds() (KERNEL_DS)
# define get_fs() (current_thread_info()->addr_limit)
# define set_fs(x) \
do { current_thread_info()->addr_limit = (x); } while (0)
# define set_fs(val) (current_thread_info()->addr_limit = (val))
# define segment_eq(a, b) ((a).seg == (b).seg)
# define segment_eq(a, b) ((a).seg == (b).seg)
# endif /* __ASSEMBLY__ */
#endif /* _ASM_MICROBLAZE_SEGMENT_H */
arch/microblaze/include/asm/setup.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2007-2008 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2007-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
......@@ -18,7 +19,6 @@
extern unsigned int boot_cpuid; /* move to smp.h */
extern char cmd_line[COMMAND_LINE_SIZE];
# endif/* __KERNEL__ */
void early_printk(const char *fmt, ...);
......@@ -30,6 +30,11 @@ void setup_heartbeat(void);
unsigned long long sched_clock(void);
# ifdef CONFIG_MMU
extern void mmu_reset(void);
extern void early_console_reg_tlb_alloc(unsigned int addr);
# endif /* CONFIG_MMU */
void time_init(void);
void init_IRQ(void);
void machine_early_init(const char *cmdline, unsigned int ram,
......@@ -40,5 +45,6 @@ void machine_shutdown(void);
void machine_halt(void);
void machine_power_off(void);
# endif/* __KERNEL__ */
# endif /* __ASSEMBLY__ */
#endif /* _ASM_MICROBLAZE_SETUP_H */
arch/microblaze/include/asm/stat.h
浏览文件 @ 02a99ed6
......@@ -16,58 +16,53 @@
#include <linux/posix_types.h>
#define STAT_HAVE_NSEC 1
struct stat {
unsigned int st_dev;
unsigned long st_dev;
unsigned long st_ino;
unsigned int st_mode;
unsigned int st_nlink;
unsigned int st_uid;
unsigned int st_gid;
unsigned int st_rdev;
unsigned long st_size;
unsigned long st_blksize;
unsigned long st_blocks;
unsigned long st_atime;
unsigned long __unused1; /* unsigned long st_atime_nsec */
unsigned long st_mtime;
unsigned long __unused2; /* unsigned long st_mtime_nsec */
unsigned long st_ctime;
unsigned long __unused3; /* unsigned long st_ctime_nsec */
unsigned long st_rdev;
unsigned long __pad1;
long st_size;
int st_blksize;
int __pad2;
long st_blocks;
int st_atime;
unsigned int st_atime_nsec;
int st_mtime;
unsigned int st_mtime_nsec;
int st_ctime;
unsigned int st_ctime_nsec;
unsigned long __unused4;
unsigned long __unused5;
};
struct stat64 {
unsigned long long st_dev;
unsigned long __unused1;
unsigned long long st_ino;
unsigned int st_mode;
unsigned int st_nlink;
unsigned int st_uid;
unsigned int st_gid;
unsigned long long st_rdev;
unsigned long __unused3;
long long st_size;
unsigned long st_blksize;
unsigned long st_blocks; /* No. of 512-byte blocks allocated */
unsigned long __unused4; /* future possible st_blocks high bits */
unsigned long st_atime;
unsigned long st_atime_nsec;
unsigned long st_mtime;
unsigned long st_mtime_nsec;
unsigned long st_ctime;
unsigned long st_ctime_nsec;
unsigned long __unused8;
unsigned long long st_dev; /* Device. */
unsigned long long st_ino; /* File serial number. */
unsigned int st_mode; /* File mode. */
unsigned int st_nlink; /* Link count. */
unsigned int st_uid; /* User ID of the file's owner. */
unsigned int st_gid; /* Group ID of the file's group. */
unsigned long long st_rdev; /* Device number, if device. */
unsigned long long __pad1;
long long st_size; /* Size of file, in bytes. */
int st_blksize; /* Optimal block size for I/O. */
int __pad2;
long long st_blocks; /* Number 512-byte blocks allocated. */
int st_atime; /* Time of last access. */
unsigned int st_atime_nsec;
int st_mtime; /* Time of last modification. */
unsigned int st_mtime_nsec;
int st_ctime; /* Time of last status change. */
unsigned int st_ctime_nsec;
unsigned int __unused4;
unsigned int __unused5;
};
#endif /* _ASM_MICROBLAZE_STAT_H */
arch/microblaze/include/asm/string.h
浏览文件 @ 02a99ed6
......@@ -9,7 +9,7 @@
#ifndef _ASM_MICROBLAZE_STRING_H
#define _ASM_MICROBLAZE_STRING_H
#ifndef __KERNEL__
#ifdef __KERNEL__
#define __HAVE_ARCH_MEMSET
#define __HAVE_ARCH_MEMCPY
......
arch/microblaze/include/asm/syscalls.h
浏览文件 @ 02a99ed6
......@@ -34,6 +34,9 @@ asmlinkage int sys_rt_sigsuspend(sigset_t __user *unewset, size_t sigsetsize,
asmlinkage int sys_sigaction(int sig, const struct old_sigaction *act,
struct old_sigaction *oact);
asmlinkage long sys_rt_sigaction(int sig, const struct sigaction __user *act,
struct sigaction __user *oact, size_t sigsetsize);
asmlinkage int sys_sigaltstack(const stack_t __user *uss, stack_t __user *uoss,
struct pt_regs *regs);
......
arch/microblaze/include/asm/thread_info.h
浏览文件 @ 02a99ed6
......@@ -122,6 +122,8 @@ static inline struct thread_info *current_thread_info(void)
#define TIF_SINGLESTEP 4
#define TIF_IRET 5 /* return with iret */
#define TIF_MEMDIE 6
#define TIF_SYSCALL_AUDIT 9 /* syscall auditing active */
#define TIF_SECCOMP 10 /* secure computing */
#define TIF_FREEZE 14 /* Freezing for suspend */
/* FIXME change in entry.S */
......@@ -138,10 +140,17 @@ static inline struct thread_info *current_thread_info(void)
#define _TIF_IRET (1<<TIF_IRET)
#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG)
#define _TIF_FREEZE (1<<TIF_FREEZE)
#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
#define _TIF_SECCOMP (1 << TIF_SECCOMP)
#define _TIF_KERNEL_TRACE (1 << TIF_KERNEL_TRACE)
/* work to do in syscall trace */
#define _TIF_WORK_SYSCALL_MASK (_TIF_SYSCALL_TRACE | _TIF_SINGLESTEP | \
_TIF_SYSCALL_AUDIT | _TIF_SECCOMP)
/* work to do on interrupt/exception return */
#define _TIF_WORK_MASK 0x0000FFFE
/* work to do on any return to u-space */
#define _TIF_ALLWORK_MASK 0x0000FFFF
......@@ -154,6 +163,17 @@ static inline struct thread_info *current_thread_info(void)
*/
/* FPU was used by this task this quantum (SMP) */
#define TS_USEDFPU 0x0001
#define TS_RESTORE_SIGMASK 0x0002
#ifndef __ASSEMBLY__
#define HAVE_SET_RESTORE_SIGMASK 1
static inline void set_restore_sigmask(void)
{
struct thread_info *ti = current_thread_info();
ti->status |= TS_RESTORE_SIGMASK;
set_bit(TIF_SIGPENDING, (unsigned long *)&ti->flags);
}
#endif
#endif /* __KERNEL__ */
#endif /* _ASM_MICROBLAZE_THREAD_INFO_H */
arch/microblaze/include/asm/tlb.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
......@@ -13,4 +15,10 @@
#include <asm-generic/tlb.h>
#ifdef CONFIG_MMU
#define tlb_start_vma(tlb, vma) do { } while (0)
#define tlb_end_vma(tlb, vma) do { } while (0)
#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
#endif
#endif /* _ASM_MICROBLAZE_TLB_H */
arch/microblaze/include/asm/tlbflush.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
......@@ -9,6 +11,50 @@
#ifndef _ASM_MICROBLAZE_TLBFLUSH_H
#define _ASM_MICROBLAZE_TLBFLUSH_H
#ifdef CONFIG_MMU
#include <linux/sched.h>
#include <linux/threads.h>
#include <asm/processor.h> /* For TASK_SIZE */
#include <asm/mmu.h>
#include <asm/page.h>
#include <asm/pgalloc.h>
extern void _tlbie(unsigned long address);
extern void _tlbia(void);
#define __tlbia() _tlbia()
static inline void local_flush_tlb_all(void)
{ __tlbia(); }
static inline void local_flush_tlb_mm(struct mm_struct *mm)
{ __tlbia(); }
static inline void local_flush_tlb_page(struct vm_area_struct *vma,
unsigned long vmaddr)
{ _tlbie(vmaddr); }
static inline void local_flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{ __tlbia(); }
#define flush_tlb_kernel_range(start, end) do { } while (0)
#define update_mmu_cache(vma, addr, pte) do { } while (0)
#define flush_tlb_all local_flush_tlb_all
#define flush_tlb_mm local_flush_tlb_mm
#define flush_tlb_page local_flush_tlb_page
#define flush_tlb_range local_flush_tlb_range
/*
* This is called in munmap when we have freed up some page-table
* pages. We don't need to do anything here, there's nothing special
* about our page-table pages. -- paulus
*/
static inline void flush_tlb_pgtables(struct mm_struct *mm,
unsigned long start, unsigned long end) { }
#else /* CONFIG_MMU */
#define flush_tlb() BUG()
#define flush_tlb_all() BUG()
#define flush_tlb_mm(mm) BUG()
......@@ -17,4 +63,6 @@
#define flush_tlb_pgtables(mm, start, end) BUG()
#define flush_tlb_kernel_range(start, end) BUG()
#endif /* CONFIG_MMU */
#endif /* _ASM_MICROBLAZE_TLBFLUSH_H */
arch/microblaze/include/asm/uaccess.h
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2008-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
* This file is subject to the terms and conditions of the GNU General Public
......@@ -26,6 +28,10 @@
#define VERIFY_READ 0
#define VERIFY_WRITE 1
#define __clear_user(addr, n) (memset((void *)(addr), 0, (n)), 0)
#ifndef CONFIG_MMU
extern int ___range_ok(unsigned long addr, unsigned long size);
#define __range_ok(addr, size) \
......@@ -34,68 +40,68 @@ extern int ___range_ok(unsigned long addr, unsigned long size);
#define access_ok(type, addr, size) (__range_ok((addr), (size)) == 0)
#define __access_ok(add, size) (__range_ok((addr), (size)) == 0)
extern inline int bad_user_access_length(void)
{
return 0;
}
/* Undefined function to trigger linker error */
extern int bad_user_access_length(void);
/* FIXME this is function for optimalization -> memcpy */
#define __get_user(var, ptr) \
({ \
int __gu_err = 0; \
switch (sizeof(*(ptr))) { \
case 1: \
case 2: \
case 4: \
(var) = *(ptr); \
break; \
case 8: \
memcpy((void *) &(var), (ptr), 8); \
break; \
default: \
(var) = 0; \
__gu_err = __get_user_bad(); \
break; \
} \
__gu_err; \
})
#define __get_user(var, ptr) \
({ \
int __gu_err = 0; \
switch (sizeof(*(ptr))) { \
case 1: \
case 2: \
case 4: \
(var) = *(ptr); \
break; \
case 8: \
memcpy((void *) &(var), (ptr), 8); \
break; \
default: \
(var) = 0; \
__gu_err = __get_user_bad(); \
break; \
} \
__gu_err; \
})
#define __get_user_bad() (bad_user_access_length(), (-EFAULT))
/* FIXME is not there defined __pu_val */
#define __put_user(var, ptr) \
({ \
int __pu_err = 0; \
switch (sizeof(*(ptr))) { \
case 1: \
case 2: \
case 4: \
*(ptr) = (var); \
break; \
case 8: { \
typeof(*(ptr)) __pu_val = var; \
memcpy(ptr, &__pu_val, sizeof(__pu_val));\
} \
break; \
default: \
__pu_err = __put_user_bad(); \
break; \
} \
__pu_err; \
})
({ \
int __pu_err = 0; \
switch (sizeof(*(ptr))) { \
case 1: \
case 2: \
case 4: \
*(ptr) = (var); \
break; \
case 8: { \
typeof(*(ptr)) __pu_val = (var); \
memcpy(ptr, &__pu_val, sizeof(__pu_val)); \
} \
break; \
default: \
__pu_err = __put_user_bad(); \
break; \
} \
__pu_err; \
})
#define __put_user_bad() (bad_user_access_length(), (-EFAULT))
#define put_user(x, ptr) __put_user(x, ptr)
#define get_user(x, ptr) __get_user(x, ptr)
#define put_user(x, ptr) __put_user((x), (ptr))
#define get_user(x, ptr) __get_user((x), (ptr))
#define copy_to_user(to, from, n) (memcpy(to, from, n), 0)
#define copy_from_user(to, from, n) (memcpy(to, from, n), 0)
#define copy_to_user(to, from, n) (memcpy((to), (from), (n)), 0)
#define copy_from_user(to, from, n) (memcpy((to), (from), (n)), 0)
#define __copy_to_user(to, from, n) (copy_to_user(to, from, n))
#define __copy_from_user(to, from, n) (copy_from_user(to, from, n))
#define __copy_to_user_inatomic(to, from, n) (__copy_to_user(to, from, n))
#define __copy_from_user_inatomic(to, from, n) (__copy_from_user(to, from, n))
#define __clear_user(addr, n) (memset((void *)addr, 0, n), 0)
#define __copy_to_user(to, from, n) (copy_to_user((to), (from), (n)))
#define __copy_from_user(to, from, n) (copy_from_user((to), (from), (n)))
#define __copy_to_user_inatomic(to, from, n) \
(__copy_to_user((to), (from), (n)))
#define __copy_from_user_inatomic(to, from, n) \
(__copy_from_user((to), (from), (n)))
static inline unsigned long clear_user(void *addr, unsigned long size)
{
......@@ -104,13 +110,200 @@ static inline unsigned long clear_user(void *addr, unsigned long size)
return size;
}
/* Returns 0 if exception not found and fixup otherwise. */
/* Returns 0 if exception not found and fixup otherwise. */
extern unsigned long search_exception_table(unsigned long);
extern long strncpy_from_user(char *dst, const char *src, long count);
extern long strnlen_user(const char *src, long count);
#else /* CONFIG_MMU */
/*
* Address is valid if:
* - "addr", "addr + size" and "size" are all below the limit
*/
#define access_ok(type, addr, size) \
(get_fs().seg > (((unsigned long)(addr)) | \
(size) | ((unsigned long)(addr) + (size))))
/* || printk("access_ok failed for %s at 0x%08lx (size %d), seg 0x%08x\n",
type?"WRITE":"READ",addr,size,get_fs().seg)) */
/*
* All the __XXX versions macros/functions below do not perform
* access checking. It is assumed that the necessary checks have been
* already performed before the finction (macro) is called.
*/
#define get_user(x, ptr) \
({ \
access_ok(VERIFY_READ, (ptr), sizeof(*(ptr))) \
? __get_user((x), (ptr)) : -EFAULT; \
})
#define put_user(x, ptr) \
({ \
access_ok(VERIFY_WRITE, (ptr), sizeof(*(ptr))) \
? __put_user((x), (ptr)) : -EFAULT; \
})
#define __get_user(x, ptr) \
({ \
unsigned long __gu_val; \
/*unsigned long __gu_ptr = (unsigned long)(ptr);*/ \
long __gu_err; \
switch (sizeof(*(ptr))) { \
case 1: \
__get_user_asm("lbu", (ptr), __gu_val, __gu_err); \
break; \
case 2: \
__get_user_asm("lhu", (ptr), __gu_val, __gu_err); \
break; \
case 4: \
__get_user_asm("lw", (ptr), __gu_val, __gu_err); \
break; \
default: \
__gu_val = 0; __gu_err = -EINVAL; \
} \
x = (__typeof__(*(ptr))) __gu_val; \
__gu_err; \
})
#define __get_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \
({ \
__asm__ __volatile__ ( \
"1:" insn " %1, %2, r0; \
addk %0, r0, r0; \
2: \
.section .fixup,\"ax\"; \
3: brid 2b; \
addik %0, r0, %3; \
.previous; \
.section __ex_table,\"a\"; \
.word 1b,3b; \
.previous;" \
: "=r"(__gu_err), "=r"(__gu_val) \
: "r"(__gu_ptr), "i"(-EFAULT) \
); \
})
#define __put_user(x, ptr) \
({ \
__typeof__(*(ptr)) __gu_val = x; \
long __gu_err = 0; \
switch (sizeof(__gu_val)) { \
case 1: \
__put_user_asm("sb", (ptr), __gu_val, __gu_err); \
break; \
case 2: \
__put_user_asm("sh", (ptr), __gu_val, __gu_err); \
break; \
case 4: \
__put_user_asm("sw", (ptr), __gu_val, __gu_err); \
break; \
case 8: \
__put_user_asm_8((ptr), __gu_val, __gu_err); \
break; \
default: \
__gu_err = -EINVAL; \
} \
__gu_err; \
})
#define __put_user_asm_8(__gu_ptr, __gu_val, __gu_err) \
({ \
__asm__ __volatile__ (" lwi %0, %1, 0; \
1: swi %0, %2, 0; \
lwi %0, %1, 4; \
2: swi %0, %2, 4; \
addk %0,r0,r0; \
3: \
.section .fixup,\"ax\"; \
4: brid 3b; \
addik %0, r0, %3; \
.previous; \
.section __ex_table,\"a\"; \
.word 1b,4b,2b,4b; \
.previous;" \
: "=&r"(__gu_err) \
: "r"(&__gu_val), \
"r"(__gu_ptr), "i"(-EFAULT) \
); \
})
#define __put_user_asm(insn, __gu_ptr, __gu_val, __gu_err) \
({ \
__asm__ __volatile__ ( \
"1:" insn " %1, %2, r0; \
addk %0, r0, r0; \
2: \
.section .fixup,\"ax\"; \
3: brid 2b; \
addik %0, r0, %3; \
.previous; \
.section __ex_table,\"a\"; \
.word 1b,3b; \
.previous;" \
: "=r"(__gu_err) \
: "r"(__gu_val), "r"(__gu_ptr), "i"(-EFAULT) \
); \
})
/*
* Return: number of not copied bytes, i.e. 0 if OK or non-zero if fail.
*/
static inline int clear_user(char *to, int size)
{
if (size && access_ok(VERIFY_WRITE, to, size)) {
__asm__ __volatile__ (" \
1: \
sb r0, %2, r0; \
addik %0, %0, -1; \
bneid %0, 1b; \
addik %2, %2, 1; \
2: \
.section __ex_table,\"a\"; \
.word 1b,2b; \
.section .text;" \
: "=r"(size) \
: "0"(size), "r"(to)
);
}
return size;
}
extern unsigned long __copy_tofrom_user(void __user *to,
const void __user *from, unsigned long size);
#define copy_to_user(to, from, n) \
(access_ok(VERIFY_WRITE, (to), (n)) ? \
__copy_tofrom_user((void __user *)(to), \
(__force const void __user *)(from), (n)) \
: -EFAULT)
#define __copy_to_user(to, from, n) copy_to_user((to), (from), (n))
#define __copy_to_user_inatomic(to, from, n) copy_to_user((to), (from), (n))
#define copy_from_user(to, from, n) \
(access_ok(VERIFY_READ, (from), (n)) ? \
__copy_tofrom_user((__force void __user *)(to), \
(void __user *)(from), (n)) \
: -EFAULT)
#define __copy_from_user(to, from, n) copy_from_user((to), (from), (n))
#define __copy_from_user_inatomic(to, from, n) \
copy_from_user((to), (from), (n))
extern int __strncpy_user(char *to, const char __user *from, int len);
extern int __strnlen_user(const char __user *sstr, int len);
#define strncpy_from_user(to, from, len) \
(access_ok(VERIFY_READ, from, 1) ? \
__strncpy_user(to, from, len) : -EFAULT)
#define strnlen_user(str, len) \
(access_ok(VERIFY_READ, str, 1) ? __strnlen_user(str, len) : 0)
extern long strncpy_from_user(char *dst, const char __user *src, long count);
extern long strnlen_user(const char __user *src, long count);
extern long __strncpy_from_user(char *dst, const char __user *src, long count);
#endif /* CONFIG_MMU */
/*
* The exception table consists of pairs of addresses: the first is the
......
arch/microblaze/include/asm/unaligned.h
浏览文件 @ 02a99ed6
......@@ -12,7 +12,8 @@
# ifdef __KERNEL__
# include <linux/unaligned/access_ok.h>
# include <linux/unaligned/be_struct.h>
# include <linux/unaligned/le_byteshift.h>
# include <linux/unaligned/generic.h>
# define get_unaligned __get_unaligned_be
......
arch/microblaze/kernel/Makefile
浏览文件 @ 02a99ed6
......@@ -15,5 +15,6 @@ obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
obj-$(CONFIG_SELFMOD) += selfmod.o
obj-$(CONFIG_HEART_BEAT) += heartbeat.o
obj-$(CONFIG_MODULES) += microblaze_ksyms.o module.o
obj-$(CONFIG_MMU) += misc.o
obj-y += entry$(MMUEXT).o
arch/microblaze/kernel/asm-offsets.c
浏览文件 @ 02a99ed6
/*
* Copyright (C) 2007-2009 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2007-2009 PetaLogix
* Copyright (C) 2006 Atmark Techno, Inc.
*
......@@ -68,16 +69,26 @@ int main(int argc, char *argv[])
/* struct task_struct */
DEFINE(TS_THREAD_INFO, offsetof(struct task_struct, stack));
#ifdef CONFIG_MMU
DEFINE(TASK_STATE, offsetof(struct task_struct, state));
DEFINE(TASK_FLAGS, offsetof(struct task_struct, flags));
DEFINE(TASK_PTRACE, offsetof(struct task_struct, ptrace));
DEFINE(TASK_BLOCKED, offsetof(struct task_struct, blocked));
DEFINE(TASK_MM, offsetof(struct task_struct, mm));
DEFINE(TASK_ACTIVE_MM, offsetof(struct task_struct, active_mm));
DEFINE(TASK_PID, offsetof(struct task_struct, pid));
DEFINE(TASK_THREAD, offsetof(struct task_struct, thread));
DEFINE(THREAD_KSP, offsetof(struct thread_struct, ksp));
BLANK();
DEFINE(PGDIR, offsetof(struct thread_struct, pgdir));
BLANK();
#endif
/* struct thread_info */
DEFINE(TI_TASK, offsetof(struct thread_info, task));
DEFINE(TI_EXEC_DOMAIN, offsetof(struct thread_info, exec_domain));
DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
DEFINE(TI_STATUS, offsetof(struct thread_info, status));
DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
DEFINE(TI_ADDR_LIMIT, offsetof(struct thread_info, addr_limit));
DEFINE(TI_RESTART_BLOCK, offsetof(struct thread_info, restart_block));
DEFINE(TI_CPU_CONTEXT, offsetof(struct thread_info, cpu_context));
BLANK();
......
arch/microblaze/kernel/early_printk.c
浏览文件 @ 02a99ed6
......@@ -87,6 +87,9 @@ int __init setup_early_printk(char *opt)
base_addr = early_uartlite_console();
if (base_addr) {
early_console_initialized = 1;
#ifdef CONFIG_MMU
early_console_reg_tlb_alloc(base_addr);
#endif
early_printk("early_printk_console is enabled at 0x%08x\n",
base_addr);
......
arch/microblaze/kernel/entry-nommu.S
浏览文件 @ 02a99ed6
......@@ -10,7 +10,7 @@
#include <linux/linkage.h>
#include <asm/thread_info.h>
#include <asm/errno.h>
#include <linux/errno.h>
#include <asm/entry.h>
#include <asm/asm-offsets.h>
#include <asm/registers.h>
......
arch/microblaze/kernel/entry.S 0 → 100644
浏览文件 @ 02a99ed6
此差异已折叠。
arch/microblaze/kernel/exceptions.c
浏览文件 @ 02a99ed6
......@@ -21,9 +21,9 @@
#include <asm/exceptions.h>
#include <asm/entry.h> /* For KM CPU var */
#include <asm/uaccess.h>
#include <asm/errno.h>
#include <asm/ptrace.h>
#include <linux/uaccess.h>
#include <linux/errno.h>
#include <linux/ptrace.h>
#include <asm/current.h>
#define MICROBLAZE_ILL_OPCODE_EXCEPTION 0x02
......@@ -31,7 +31,7 @@
#define MICROBLAZE_DBUS_EXCEPTION 0x04
#define MICROBLAZE_DIV_ZERO_EXCEPTION 0x05
#define MICROBLAZE_FPU_EXCEPTION 0x06
#define MICROBLAZE_PRIVILEG_EXCEPTION 0x07
#define MICROBLAZE_PRIVILEGED_EXCEPTION 0x07
static DEFINE_SPINLOCK(die_lock);
......@@ -66,6 +66,11 @@ void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr)
asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
int fsr, int addr)
{
#ifdef CONFIG_MMU
int code;
addr = regs->pc;
#endif
#if 0
printk(KERN_WARNING "Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n",
type, user_mode(regs) ? "user" : "kernel", fsr,
......@@ -74,7 +79,13 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
switch (type & 0x1F) {
case MICROBLAZE_ILL_OPCODE_EXCEPTION:
_exception(SIGILL, regs, ILL_ILLOPC, addr);
if (user_mode(regs)) {
printk(KERN_WARNING "Illegal opcode exception in user mode.\n");
_exception(SIGILL, regs, ILL_ILLOPC, addr);
return;
}
printk(KERN_WARNING "Illegal opcode exception in kernel mode.\n");
die("opcode exception", regs, SIGBUS);
break;
case MICROBLAZE_IBUS_EXCEPTION:
if (user_mode(regs)) {
......@@ -95,11 +106,16 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
die("bus exception", regs, SIGBUS);
break;
case MICROBLAZE_DIV_ZERO_EXCEPTION:
printk(KERN_WARNING "Divide by zero exception\n");
_exception(SIGILL, regs, ILL_ILLOPC, addr);
if (user_mode(regs)) {
printk(KERN_WARNING "Divide by zero exception in user mode\n");
_exception(SIGILL, regs, ILL_ILLOPC, addr);
return;
}
printk(KERN_WARNING "Divide by zero exception in kernel mode.\n");
die("Divide by exception", regs, SIGBUS);
break;
case MICROBLAZE_FPU_EXCEPTION:
printk(KERN_WARNING "FPU exception\n");
/* IEEE FP exception */
/* I removed fsr variable and use code var for storing fsr */
if (fsr & FSR_IO)
......@@ -115,7 +131,20 @@ asmlinkage void full_exception(struct pt_regs *regs, unsigned int type,
_exception(SIGFPE, regs, fsr, addr);
break;
#ifdef CONFIG_MMU
case MICROBLAZE_PRIVILEGED_EXCEPTION:
printk(KERN_WARNING "Privileged exception\n");
/* "brk r0,r0" - used as debug breakpoint */
if (get_user(code, (unsigned long *)regs->pc) == 0
&& code == 0x980c0000) {
_exception(SIGTRAP, regs, TRAP_BRKPT, addr);
} else {
_exception(SIGILL, regs, ILL_PRVOPC, addr);
}
break;
#endif
default:
/* FIXME what to do in unexpected exception */
printk(KERN_WARNING "Unexpected exception %02x "
"PC=%08x in %s mode\n", type, (unsigned int) addr,
kernel_mode(regs) ? "kernel" : "user");
......
arch/microblaze/kernel/head.S
浏览文件 @ 02a99ed6
此差异已折叠。
arch/microblaze/kernel/microblaze_ksyms.c
浏览文件 @ 02a99ed6
......@@ -45,3 +45,5 @@ extern void __udivsi3(void);
EXPORT_SYMBOL(__udivsi3);
extern void __umodsi3(void);
EXPORT_SYMBOL(__umodsi3);
extern char *_ebss;
EXPORT_SYMBOL_GPL(_ebss);
arch/microblaze/kernel/misc.S 0 → 100644
浏览文件 @ 02a99ed6
此差异已折叠。
arch/microblaze/kernel/process.c
浏览文件 @ 02a99ed6
......@@ -126,9 +126,54 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
else
childregs->r1 = ((unsigned long) ti) + THREAD_SIZE;
#ifndef CONFIG_MMU
memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
ti->cpu_context.r1 = (unsigned long)childregs;
ti->cpu_context.msr = (unsigned long)childregs->msr;
#else
/* if creating a kernel thread then update the current reg (we don't
* want to use the parent's value when restoring by POP_STATE) */
if (kernel_mode(regs))
/* save new current on stack to use POP_STATE */
childregs->CURRENT_TASK = (unsigned long)p;
/* if returning to user then use the parent's value of this register */
/* if we're creating a new kernel thread then just zeroing all
* the registers. That's OK for a brand new thread.*/
/* Pls. note that some of them will be restored in POP_STATE */
if (kernel_mode(regs))
memset(&ti->cpu_context, 0, sizeof(struct cpu_context));
/* if this thread is created for fork/vfork/clone, then we want to
* restore all the parent's context */
/* in addition to the registers which will be restored by POP_STATE */
else {
ti->cpu_context = *(struct cpu_context *)regs;
childregs->msr |= MSR_UMS;
}
/* FIXME STATE_SAVE_PT_OFFSET; */
ti->cpu_context.r1 = (unsigned long)childregs - STATE_SAVE_ARG_SPACE;
/* we should consider the fact that childregs is a copy of the parent
* regs which were saved immediately after entering the kernel state
* before enabling VM. This MSR will be restored in switch_to and
* RETURN() and we want to have the right machine state there
* specifically this state must have INTs disabled before and enabled
* after performing rtbd
* compose the right MSR for RETURN(). It will work for switch_to also
* excepting for VM and UMS
* don't touch UMS , CARRY and cache bits
* right now MSR is a copy of parent one */
childregs->msr |= MSR_BIP;
childregs->msr &= ~MSR_EIP;
childregs->msr |= MSR_IE;
childregs->msr &= ~MSR_VM;
childregs->msr |= MSR_VMS;
childregs->msr |= MSR_EE; /* exceptions will be enabled*/
ti->cpu_context.msr = (childregs->msr|MSR_VM);
ti->cpu_context.msr &= ~MSR_UMS; /* switch_to to kernel mode */
#endif
ti->cpu_context.r15 = (unsigned long)ret_from_fork - 8;
if (clone_flags & CLONE_SETTLS)
......@@ -137,6 +182,7 @@ int copy_thread(unsigned long clone_flags, unsigned long usp,
return 0;
}
#ifndef CONFIG_MMU
/*
* Return saved PC of a blocked thread.
*/
......@@ -151,6 +197,7 @@ unsigned long thread_saved_pc(struct task_struct *tsk)
else
return ctx->r14;
}
#endif
static void kernel_thread_helper(int (*fn)(void *), void *arg)
{
......@@ -173,6 +220,7 @@ int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags)
return do_fork(flags | CLONE_VM | CLONE_UNTRACED, 0,
&regs, 0, NULL, NULL);
}
EXPORT_SYMBOL_GPL(kernel_thread);
unsigned long get_wchan(struct task_struct *p)
{
......@@ -188,3 +236,14 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp)
regs->r1 = usp;
regs->pt_mode = 0;
}
#ifdef CONFIG_MMU
#include <linux/elfcore.h>
/*
* Set up a thread for executing a new program
*/
int dump_fpu(struct pt_regs *regs, elf_fpregset_t *fpregs)
{
return 0; /* MicroBlaze has no separate FPU registers */
}
#endif /* CONFIG_MMU */
arch/microblaze/kernel/prom.c
浏览文件 @ 02a99ed6
......@@ -509,12 +509,13 @@ static void __init early_init_dt_check_for_initrd(unsigned long node)
prop = of_get_flat_dt_prop(node, "linux,initrd-start", &l);
if (prop) {
initrd_start = (unsigned long)__va(of_read_ulong(prop, l/4));
initrd_start = (unsigned long)
__va((u32)of_read_ulong(prop, l/4));
prop = of_get_flat_dt_prop(node, "linux,initrd-end", &l);
if (prop) {
initrd_end = (unsigned long)
__va(of_read_ulong(prop, l/4));
__va((u32)of_read_ulong(prop, 1/4));
initrd_below_start_ok = 1;
} else {
initrd_start = 0;
......@@ -563,7 +564,9 @@ static int __init early_init_dt_scan_chosen(unsigned long node,
strlcpy(cmd_line, p, min((int)l, COMMAND_LINE_SIZE));
#ifdef CONFIG_CMDLINE
#ifndef CONFIG_CMDLINE_FORCE
if (p == NULL || l == 0 || (l == 1 && (*p) == 0))
#endif
strlcpy(cmd_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
#endif /* CONFIG_CMDLINE */
......
arch/microblaze/kernel/setup.c
浏览文件 @ 02a99ed6
此差异已折叠。
arch/microblaze/kernel/signal.c
浏览文件 @ 02a99ed6
此差异已折叠。
arch/microblaze/kernel/traps.c
浏览文件 @ 02a99ed6
此差异已折叠。
arch/microblaze/lib/Makefile
浏览文件 @ 02a99ed6
此差异已折叠。
arch/microblaze/lib/checksum.c
浏览文件 @ 02a99ed6
此差异已折叠。
arch/microblaze/lib/memcpy.c
浏览文件 @ 02a99ed6
此差异已折叠。
arch/microblaze/lib/uaccess_old.S 0 → 100644
浏览文件 @ 02a99ed6
此差异已折叠。
arch/microblaze/mm/Makefile
浏览文件 @ 02a99ed6
......@@ -3,3 +3,5 @@
#
obj-y := init.o
obj-$(CONFIG_MMU) += pgtable.o mmu_context.o fault.o
arch/microblaze/mm/fault.c 0 → 100644
浏览文件 @ 02a99ed6
此差异已折叠。
arch/microblaze/mm/init.c
浏览文件 @ 02a99ed6
此差异已折叠。
arch/microblaze/mm/mmu_context.c 0 → 100644
浏览文件 @ 02a99ed6
此差异已折叠。
arch/microblaze/mm/pgtable.c 0 → 100644
浏览文件 @ 02a99ed6
此差异已折叠。
drivers/block/Kconfig
浏览文件 @ 02a99ed6
此差异已折叠。
drivers/char/Kconfig
浏览文件 @ 02a99ed6
此差异已折叠。
drivers/gpio/Kconfig
浏览文件 @ 02a99ed6
此差异已折叠。
drivers/input/serio/Kconfig
浏览文件 @ 02a99ed6
此差异已折叠。
drivers/of/Kconfig
浏览文件 @ 02a99ed6
此差异已折叠。
drivers/spi/Kconfig
浏览文件 @ 02a99ed6
此差异已折叠。
drivers/usb/Kconfig
浏览文件 @ 02a99ed6
此差异已折叠。
drivers/video/Kconfig
浏览文件 @ 02a99ed6
此差异已折叠。
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或