Kconfig 61.5 KB
Newer Older
1 2
config DEFCONFIG_LIST
	string
3
	depends on !UML
4
	option defconfig_list
5
	default "/lib/modules/$(shell,uname --release)/.config"
6
	default "/etc/kernel-config"
7
	default "/boot/config-$(shell,uname --release)"
8 9
	default ARCH_DEFCONFIG
	default "arch/$(ARCH)/defconfig"
10

11 12 13 14 15 16 17 18
config CC_IS_GCC
	def_bool $(success,$(CC) --version | head -n 1 | grep -q gcc)

config GCC_VERSION
	int
	default $(shell,$(srctree)/scripts/gcc-version.sh -p $(CC) | sed 's/^0*//') if CC_IS_GCC
	default 0

19 20 21 22 23 24 25
config CC_IS_CLANG
	def_bool $(success,$(CC) --version | head -n 1 | grep -q clang)

config CLANG_VERSION
	int
	default $(shell,$(srctree)/scripts/clang-version.sh $(CC))

26 27 28 29
config CONSTRUCTORS
	bool
	depends on !UML

30 31 32
config IRQ_WORK
	bool

33 34 35
config BUILDTIME_EXTABLE_SORT
	bool

36 37 38 39 40 41 42
config THREAD_INFO_IN_TASK
	bool
	help
	  Select this to move thread_info off the stack into task_struct.  To
	  make this work, an arch will need to remove all thread_info fields
	  except flags and fix any runtime bugs.

43 44 45
	  One subtle change that will be needed is to use try_get_task_stack()
	  and put_task_stack() in save_thread_stack_tsk() and get_wchan().

46
menu "General setup"
L
Linus Torvalds 已提交
47 48 49 50 51 52 53 54 55 56 57

config BROKEN
	bool

config BROKEN_ON_SMP
	bool
	depends on BROKEN || !SMP
	default y

config INIT_ENV_ARG_LIMIT
	int
58 59
	default 32 if !UML
	default 128 if UML
L
Linus Torvalds 已提交
60
	help
61 62
	  Maximum of each of the number of arguments and environment
	  variables passed to init from the kernel command line.
L
Linus Torvalds 已提交
63

64 65
config COMPILE_TEST
	bool "Compile also drivers which will not load"
66
	depends on !UML
67 68 69 70 71 72 73 74 75 76 77 78
	default n
	help
	  Some drivers can be compiled on a different platform than they are
	  intended to be run on. Despite they cannot be loaded there (or even
	  when they load they cannot be used due to missing HW support),
	  developers still, opposing to distributors, might want to build such
	  drivers to compile-test them.

	  If you are a developer and want to build everything available, say Y
	  here. If you are a user/distributor, say N here to exclude useless
	  drivers to be distributed.

L
Linus Torvalds 已提交
79 80 81 82 83 84 85 86 87 88
config LOCALVERSION
	string "Local version - append to kernel release"
	help
	  Append an extra string to the end of your kernel version.
	  This will show up when you type uname, for example.
	  The string you set here will be appended after the contents of
	  any files with a filename matching localversion* in your
	  object and source tree, in that order.  Your total string can
	  be a maximum of 64 characters.

89 90 91
config LOCALVERSION_AUTO
	bool "Automatically append version information to the version string"
	default y
92
	depends on !COMPILE_TEST
93 94
	help
	  This will try to automatically determine if the current tree is a
95 96
	  release tree by looking for git tags that belong to the current
	  top of tree revision.
97 98

	  A string of the format -gxxxxxxxx will be added to the localversion
99
	  if a git-based tree is found.  The string generated by this will be
100
	  appended after any matching localversion* files, and after the value
101
	  set in CONFIG_LOCALVERSION.
102

103 104 105 106 107 108
	  (The actual string used here is the first eight characters produced
	  by running the command:

	    $ git rev-parse --verify HEAD

	  which is done within the script "scripts/setlocalversion".)
109

110 111 112 113 114 115 116 117 118
config HAVE_KERNEL_GZIP
	bool

config HAVE_KERNEL_BZIP2
	bool

config HAVE_KERNEL_LZMA
	bool

119 120 121
config HAVE_KERNEL_XZ
	bool

122 123 124
config HAVE_KERNEL_LZO
	bool

125 126 127
config HAVE_KERNEL_LZ4
	bool

128
choice
129 130
	prompt "Kernel compression mode"
	default KERNEL_GZIP
131
	depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_XZ || HAVE_KERNEL_LZO || HAVE_KERNEL_LZ4
132
	help
133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150
	  The linux kernel is a kind of self-extracting executable.
	  Several compression algorithms are available, which differ
	  in efficiency, compression and decompression speed.
	  Compression speed is only relevant when building a kernel.
	  Decompression speed is relevant at each boot.

	  If you have any problems with bzip2 or lzma compressed
	  kernels, mail me (Alain Knaff) <alain@knaff.lu>. (An older
	  version of this functionality (bzip2 only), for 2.4, was
	  supplied by Christian Ludwig)

	  High compression options are mostly useful for users, who
	  are low on disk space (embedded systems), but for whom ram
	  size matters less.

	  If in doubt, select 'gzip'

config KERNEL_GZIP
151 152 153
	bool "Gzip"
	depends on HAVE_KERNEL_GZIP
	help
154 155
	  The old and tried gzip compression. It provides a good balance
	  between compression ratio and decompression speed.
156 157 158

config KERNEL_BZIP2
	bool "Bzip2"
159
	depends on HAVE_KERNEL_BZIP2
160 161
	help
	  Its compression ratio and speed is intermediate.
162
	  Decompression speed is slowest among the choices.  The kernel
163 164 165
	  size is about 10% smaller with bzip2, in comparison to gzip.
	  Bzip2 uses a large amount of memory. For modern kernels you
	  will need at least 8MB RAM or more for booting.
166 167

config KERNEL_LZMA
168 169 170
	bool "LZMA"
	depends on HAVE_KERNEL_LZMA
	help
171 172 173
	  This compression algorithm's ratio is best.  Decompression speed
	  is between gzip and bzip2.  Compression is slowest.
	  The kernel size is about 33% smaller with LZMA in comparison to gzip.
174

175 176 177 178 179 180 181 182 183 184 185 186 187 188 189
config KERNEL_XZ
	bool "XZ"
	depends on HAVE_KERNEL_XZ
	help
	  XZ uses the LZMA2 algorithm and instruction set specific
	  BCJ filters which can improve compression ratio of executable
	  code. The size of the kernel is about 30% smaller with XZ in
	  comparison to gzip. On architectures for which there is a BCJ
	  filter (i386, x86_64, ARM, IA-64, PowerPC, and SPARC), XZ
	  will create a few percent smaller kernel than plain LZMA.

	  The speed is about the same as with LZMA: The decompression
	  speed of XZ is better than that of bzip2 but worse than gzip
	  and LZO. Compression is slow.

190 191 192 193
config KERNEL_LZO
	bool "LZO"
	depends on HAVE_KERNEL_LZO
	help
194
	  Its compression ratio is the poorest among the choices. The kernel
S
Stephan Sperber 已提交
195
	  size is about 10% bigger than gzip; however its speed
196 197
	  (both compression and decompression) is the fastest.

198 199 200 201 202 203 204 205 206 207 208 209
config KERNEL_LZ4
	bool "LZ4"
	depends on HAVE_KERNEL_LZ4
	help
	  LZ4 is an LZ77-type compressor with a fixed, byte-oriented encoding.
	  A preliminary version of LZ4 de/compression tool is available at
	  <https://code.google.com/p/lz4/>.

	  Its compression ratio is worse than LZO. The size of the kernel
	  is about 8% bigger than LZO. But the decompression speed is
	  faster than LZO.

210 211
endchoice

212 213 214 215 216 217 218 219 220
config DEFAULT_HOSTNAME
	string "Default hostname"
	default "(none)"
	help
	  This option determines the default system hostname before userspace
	  calls sethostname(2). The kernel traditionally uses "(none)" here,
	  but you may wish to use a different default here to make a minimal
	  system more usable with less configuration.

L
Linus Torvalds 已提交
221 222
config SWAP
	bool "Support for paging of anonymous memory (swap)"
223
	depends on MMU && BLOCK
L
Linus Torvalds 已提交
224 225 226
	default y
	help
	  This option allows you to choose whether you want to have support
227
	  for so called swap devices or swap files in your kernel that are
L
Linus Torvalds 已提交
228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245
	  used to provide more virtual memory than the actual RAM present
	  in your computer.  If unsure say Y.

config SYSVIPC
	bool "System V IPC"
	---help---
	  Inter Process Communication is a suite of library functions and
	  system calls which let processes (running programs) synchronize and
	  exchange information. It is generally considered to be a good thing,
	  and some programs won't run unless you say Y here. In particular, if
	  you want to run the DOS emulator dosemu under Linux (read the
	  DOSEMU-HOWTO, available from <http://www.tldp.org/docs.html#howto>),
	  you'll need to say Y here.

	  You can find documentation about IPC with "info ipc" and also in
	  section 6.4 of the Linux Programmer's Guide, available from
	  <http://www.tldp.org/guides.html>.

246 247 248 249 250 251
config SYSVIPC_SYSCTL
	bool
	depends on SYSVIPC
	depends on SYSCTL
	default y

L
Linus Torvalds 已提交
252 253
config POSIX_MQUEUE
	bool "POSIX Message Queues"
254
	depends on NET
L
Linus Torvalds 已提交
255 256 257 258 259
	---help---
	  POSIX variant of message queues is a part of IPC. In POSIX message
	  queues every message has a priority which decides about succession
	  of receiving it by a process. If you want to compile and run
	  programs written e.g. for Solaris with use of its POSIX message
260
	  queues (functions mq_*) say Y here.
L
Linus Torvalds 已提交
261 262 263 264 265 266 267

	  POSIX message queues are visible as a filesystem called 'mqueue'
	  and can be mounted somewhere if you want to do filesystem
	  operations on message queues.

	  If unsure, say Y.

268 269 270 271 272 273
config POSIX_MQUEUE_SYSCTL
	bool
	depends on POSIX_MQUEUE
	depends on SYSCTL
	default y

274 275 276 277 278 279 280
config CROSS_MEMORY_ATTACH
	bool "Enable process_vm_readv/writev syscalls"
	depends on MMU
	default y
	help
	  Enabling this option adds the system calls process_vm_readv and
	  process_vm_writev which allow a process with the correct privileges
281
	  to directly read from or write to another process' address space.
282 283
	  See the man page for more details.

284 285
config USELIB
	bool "uselib syscall"
286
	def_bool ALPHA || M68K || SPARC || X86_32 || IA32_EMULATION
287 288 289 290 291 292 293
	help
	  This option enables the uselib syscall, a system call used in the
	  dynamic linker from libc5 and earlier.  glibc does not use this
	  system call.  If you intend to run programs built on libc5 or
	  earlier, you may need to enable this syscall.  Current systems
	  running glibc can safely disable this.

294 295 296 297 298 299
config AUDIT
	bool "Auditing support"
	depends on NET
	help
	  Enable auditing infrastructure that can be used with another
	  kernel subsystem, such as SELinux (which requires this for
300 301
	  logging of avc messages output).  System call auditing is included
	  on architectures which support it.
302

303 304 305
config HAVE_ARCH_AUDITSYSCALL
	bool

306
config AUDITSYSCALL
307
	def_bool y
308
	depends on AUDIT && HAVE_ARCH_AUDITSYSCALL
309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324

config AUDIT_WATCH
	def_bool y
	depends on AUDITSYSCALL
	select FSNOTIFY

config AUDIT_TREE
	def_bool y
	depends on AUDITSYSCALL
	select FSNOTIFY

source "kernel/irq/Kconfig"
source "kernel/time/Kconfig"

menu "CPU/Task time and stats accounting"

325 326 327
config VIRT_CPU_ACCOUNTING
	bool

328 329 330
choice
	prompt "Cputime accounting"
	default TICK_CPU_ACCOUNTING if !PPC64
331
	default VIRT_CPU_ACCOUNTING_NATIVE if PPC64
332 333 334 335

# Kind of a stub config for the pure tick based cputime accounting
config TICK_CPU_ACCOUNTING
	bool "Simple tick based cputime accounting"
336
	depends on !S390 && !NO_HZ_FULL
337 338 339 340 341 342 343
	help
	  This is the basic tick based cputime accounting that maintains
	  statistics about user, system and idle time spent on per jiffies
	  granularity.

	  If unsure, say Y.

344
config VIRT_CPU_ACCOUNTING_NATIVE
345
	bool "Deterministic task and CPU time accounting"
346
	depends on HAVE_VIRT_CPU_ACCOUNTING && !NO_HZ_FULL
347
	select VIRT_CPU_ACCOUNTING
348 349 350 351 352 353 354 355 356
	help
	  Select this option to enable more accurate task and CPU time
	  accounting.  This is done by reading a CPU counter on each
	  kernel entry and exit and on transitions within the kernel
	  between system, softirq and hardirq state, so there is a
	  small performance impact.  In the case of s390 or IBM POWER > 5,
	  this also enables accounting of stolen time on logically-partitioned
	  systems.

357 358
config VIRT_CPU_ACCOUNTING_GEN
	bool "Full dynticks CPU time accounting"
359
	depends on HAVE_CONTEXT_TRACKING
360
	depends on HAVE_VIRT_CPU_ACCOUNTING_GEN
361 362 363 364 365 366 367 368 369 370 371 372 373 374
	select VIRT_CPU_ACCOUNTING
	select CONTEXT_TRACKING
	help
	  Select this option to enable task and CPU time accounting on full
	  dynticks systems. This accounting is implemented by watching every
	  kernel-user boundaries using the context tracking subsystem.
	  The accounting is thus performed at the expense of some significant
	  overhead.

	  For now this is only useful if you are working on the full
	  dynticks subsystem development.

	  If unsure, say N.

375 376
endchoice

377 378
config IRQ_TIME_ACCOUNTING
	bool "Fine granularity task level IRQ time accounting"
379
	depends on HAVE_IRQ_TIME_ACCOUNTING && !VIRT_CPU_ACCOUNTING_NATIVE
380 381 382 383 384 385 386 387
	help
	  Select this option to enable fine granularity task irq time
	  accounting. This is done by reading a timestamp on each
	  transitions between softirq and hardirq state, so there can be a
	  small performance impact.

	  If in doubt, say N here.

L
Linus Torvalds 已提交
388 389
config BSD_PROCESS_ACCT
	bool "BSD Process Accounting"
390
	depends on MULTIUSER
L
Linus Torvalds 已提交
391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411
	help
	  If you say Y here, a user level program will be able to instruct the
	  kernel (via a special system call) to write process accounting
	  information to a file: whenever a process exits, information about
	  that process will be appended to the file by the kernel.  The
	  information includes things such as creation time, owning user,
	  command name, memory usage, controlling terminal etc. (the complete
	  list is in the struct acct in <file:include/linux/acct.h>).  It is
	  up to the user level program to do useful things with this
	  information.  This is generally a good idea, so say Y.

config BSD_PROCESS_ACCT_V3
	bool "BSD Process Accounting version 3 file format"
	depends on BSD_PROCESS_ACCT
	default n
	help
	  If you say Y here, the process accounting information is written
	  in a new file format that also logs the process IDs of each
	  process and it's parent. Note that this file format is incompatible
	  with previous v0/v1/v2 file formats, so you will need updated tools
	  for processing it. A preliminary version of these tools is available
412
	  at <http://www.gnu.org/software/acct/>.
L
Linus Torvalds 已提交
413

414
config TASKSTATS
415
	bool "Export task/process statistics through netlink"
416
	depends on NET
417
	depends on MULTIUSER
418 419 420 421 422 423 424 425 426 427
	default n
	help
	  Export selected statistics for tasks/processes through the
	  generic netlink interface. Unlike BSD process accounting, the
	  statistics are available during the lifetime of tasks/processes as
	  responses to commands. Like BSD accounting, they are sent to user
	  space on task exit.

	  Say N if unsure.

428
config TASK_DELAY_ACCT
429
	bool "Enable per-task delay accounting"
430
	depends on TASKSTATS
431
	select SCHED_INFO
432 433 434 435 436 437 438 439
	help
	  Collect information on time spent by a task waiting for system
	  resources like cpu, synchronous block I/O completion and swapping
	  in pages. Such statistics can help in setting a task's priorities
	  relative to other tasks for cpu, io, rss limits etc.

	  Say N if unsure.

440
config TASK_XACCT
441
	bool "Enable extended accounting over taskstats"
442 443 444 445 446 447 448 449
	depends on TASKSTATS
	help
	  Collect extended task accounting data and send the data
	  to userland for processing over the taskstats interface.

	  Say N if unsure.

config TASK_IO_ACCOUNTING
450
	bool "Enable per-task storage I/O accounting"
451 452 453 454 455 456 457
	depends on TASK_XACCT
	help
	  Collect information on the number of bytes of storage I/O which this
	  task has caused.

	  Say N if unsure.

458
endmenu # "CPU/Task time and stats accounting"
T
Thomas Gleixner 已提交
459

460 461
config CPU_ISOLATION
	bool "CPU isolation"
462
	depends on SMP || COMPILE_TEST
463
	default y
464 465 466
	help
	  Make sure that CPUs running critical tasks are not disturbed by
	  any source of "noise" such as unbound workqueues, timers, kthreads...
467 468 469 470
	  Unbound jobs get offloaded to housekeeping CPUs. This is driven by
	  the "isolcpus=" boot parameter.

	  Say Y if unsure.
471

472
source "kernel/rcu/Kconfig"
M
Mike Travis 已提交
473

474 475 476 477
config BUILD_BIN2C
	bool
	default n

L
Linus Torvalds 已提交
478
config IKCONFIG
479
	tristate "Kernel .config support"
480
	select BUILD_BIN2C
L
Linus Torvalds 已提交
481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497
	---help---
	  This option enables the complete Linux kernel ".config" file
	  contents to be saved in the kernel. It provides documentation
	  of which kernel options are used in a running kernel or in an
	  on-disk kernel.  This information can be extracted from the kernel
	  image file with the script scripts/extract-ikconfig and used as
	  input to rebuild the current kernel or to build another kernel.
	  It can also be extracted from a running kernel by reading
	  /proc/config.gz if enabled (below).

config IKCONFIG_PROC
	bool "Enable access to .config through /proc/config.gz"
	depends on IKCONFIG && PROC_FS
	---help---
	  This option enables access to the kernel configuration file
	  through /proc/config.gz.

498 499
config LOG_BUF_SHIFT
	int "Kernel log buffer size (16 => 64KB, 17 => 128KB)"
500
	range 12 25
A
Adrian Bunk 已提交
501
	default 17
502
	depends on PRINTK
503
	help
504 505 506 507 508
	  Select the minimal kernel log buffer size as a power of 2.
	  The final size is affected by LOG_CPU_MAX_BUF_SHIFT config
	  parameter, see below. Any higher size also might be forced
	  by "log_buf_len" boot parameter.

A
Adrian Bunk 已提交
509
	  Examples:
510
		     17 => 128 KB
A
Adrian Bunk 已提交
511
		     16 => 64 KB
512 513
		     15 => 32 KB
		     14 => 16 KB
514 515 516
		     13 =>  8 KB
		     12 =>  4 KB

517 518
config LOG_CPU_MAX_BUF_SHIFT
	int "CPU kernel log buffer size contribution (13 => 8 KB, 17 => 128KB)"
519
	depends on SMP
520 521 522
	range 0 21
	default 12 if !BASE_SMALL
	default 0 if BASE_SMALL
523
	depends on PRINTK
524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541
	help
	  This option allows to increase the default ring buffer size
	  according to the number of CPUs. The value defines the contribution
	  of each CPU as a power of 2. The used space is typically only few
	  lines however it might be much more when problems are reported,
	  e.g. backtraces.

	  The increased size means that a new buffer has to be allocated and
	  the original static one is unused. It makes sense only on systems
	  with more CPUs. Therefore this value is used only when the sum of
	  contributions is greater than the half of the default kernel ring
	  buffer as defined by LOG_BUF_SHIFT. The default values are set
	  so that more than 64 CPUs are needed to trigger the allocation.

	  Also this option is ignored when "log_buf_len" kernel parameter is
	  used as it forces an exact (power of two) size of the ring buffer.

	  The number of possible CPUs is used for this computation ignoring
G
Geert Uytterhoeven 已提交
542 543
	  hotplugging making the computation optimal for the worst case
	  scenario while allowing a simple algorithm to be used from bootup.
544 545 546 547 548 549 550 551 552

	  Examples shift values and their meaning:
		     17 => 128 KB for each CPU
		     16 =>  64 KB for each CPU
		     15 =>  32 KB for each CPU
		     14 =>  16 KB for each CPU
		     13 =>   8 KB for each CPU
		     12 =>   4 KB for each CPU

553 554
config PRINTK_SAFE_LOG_BUF_SHIFT
	int "Temporary per-CPU printk log buffer size (12 => 4KB, 13 => 8KB)"
555 556
	range 10 21
	default 13
557
	depends on PRINTK
558
	help
559 560 561 562 563
	  Select the size of an alternate printk per-CPU buffer where messages
	  printed from usafe contexts are temporary stored. One example would
	  be NMI messages, another one - printk recursion. The messages are
	  copied to the main log buffer in a safe context to avoid a deadlock.
	  The value defines the size as a power of 2.
564

565
	  Those messages are rare and limited. The largest one is when
566 567 568 569 570 571 572 573 574 575 576
	  a backtrace is printed. It usually fits into 4KB. Select
	  8KB if you want to be on the safe side.

	  Examples:
		     17 => 128 KB for each CPU
		     16 =>  64 KB for each CPU
		     15 =>  32 KB for each CPU
		     14 =>  16 KB for each CPU
		     13 =>   8 KB for each CPU
		     12 =>   4 KB for each CPU

577 578 579 580 581 582
#
# Architectures with an unreliable sched_clock() should select this:
#
config HAVE_UNSTABLE_SCHED_CLOCK
	bool

583 584 585
config GENERIC_SCHED_CLOCK
	bool

586 587 588 589 590 591 592
#
# For architectures that want to enable the support for NUMA-affine scheduler
# balancing logic:
#
config ARCH_SUPPORTS_NUMA_BALANCING
	bool

593 594 595 596 597 598 599 600 601 602
#
# For architectures that prefer to flush all TLBs after a number of pages
# are unmapped instead of sending one IPI per page to flush. The architecture
# must provide guarantees on what happens if a clean TLB cache entry is
# written after the unmap. Details are in mm/rmap.c near the check for
# should_defer_flush. The architecture should also consider if the full flush
# and the refill costs are offset by the savings of sending fewer IPIs.
config ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
	bool

P
Peter Zijlstra 已提交
603 604 605 606 607 608
#
# For architectures that know their GCC __int128 support is sound
#
config ARCH_SUPPORTS_INT128
	bool

609 610 611 612 613 614 615 616 617 618 619 620 621 622
# For architectures that (ab)use NUMA to represent different memory regions
# all cpu-local but of different latencies, such as SuperH.
#
config ARCH_WANT_NUMA_VARIABLE_LOCALITY
	bool

config NUMA_BALANCING
	bool "Memory placement aware NUMA scheduler"
	depends on ARCH_SUPPORTS_NUMA_BALANCING
	depends on !ARCH_WANT_NUMA_VARIABLE_LOCALITY
	depends on SMP && NUMA && MIGRATION
	help
	  This option adds support for automatic NUMA aware memory/task placement.
	  The mechanism is quite primitive and is based on migrating memory when
623
	  it has references to the node the task is running on.
624 625 626

	  This system will be inactive on UMA systems.

627 628 629 630 631 632 633 634
config NUMA_BALANCING_DEFAULT_ENABLED
	bool "Automatically enable NUMA aware memory/task placement"
	default y
	depends on NUMA_BALANCING
	help
	  If set, automatic NUMA balancing will be enabled if running on a NUMA
	  machine.

L
Li Zefan 已提交
635
menuconfig CGROUPS
636
	bool "Control Group support"
T
Tejun Heo 已提交
637
	select KERNFS
638
	help
L
Li Zefan 已提交
639
	  This option adds support for grouping sets of processes together, for
640 641 642 643
	  use with process control subsystems such as Cpusets, CFS, memory
	  controls or device isolation.
	  See
		- Documentation/scheduler/sched-design-CFS.txt	(CFS)
644
		- Documentation/cgroup-v1/ (features for grouping, isolation
L
Li Zefan 已提交
645
					  and resource control)
646 647 648

	  Say N if unsure.

L
Li Zefan 已提交
649 650
if CGROUPS

651 652 653
config PAGE_COUNTER
       bool

A
Andrew Morton 已提交
654
config MEMCG
655
	bool "Memory controller"
656
	select PAGE_COUNTER
657
	select EVENTFD
658
	help
659
	  Provides control over the memory footprint of tasks in a cgroup.
660

A
Andrew Morton 已提交
661
config MEMCG_SWAP
662
	bool "Swap controller"
A
Andrew Morton 已提交
663
	depends on MEMCG && SWAP
664
	help
665 666
	  Provides control over the swap space consumed by tasks in a cgroup.

A
Andrew Morton 已提交
667
config MEMCG_SWAP_ENABLED
668
	bool "Swap controller enabled by default"
A
Andrew Morton 已提交
669
	depends on MEMCG_SWAP
670 671 672 673
	default y
	help
	  Memory Resource Controller Swap Extension comes with its price in
	  a bigger memory consumption. General purpose distribution kernels
J
Jim Cromie 已提交
674
	  which want to enable the feature but keep it disabled by default
675
	  and let the user enable it by swapaccount=1 boot command line
676 677 678
	  parameter should have this option unselected.
	  For those who want to have the feature enabled by default should
	  select this option (if, for some reason, they need to disable it
679
	  then swapaccount=0 does the trick).
680

681 682 683
config BLK_CGROUP
	bool "IO controller"
	depends on BLOCK
684
	default n
685 686 687 688
	---help---
	Generic block IO controller cgroup interface. This is the common
	cgroup interface which should be used by various IO controlling
	policies.
689

690 691 692 693
	Currently, CFQ IO scheduler uses it to recognize task groups and
	control disk bandwidth allocation (proportional time slice allocation)
	to such task groups. It is also used by bio throttling logic in
	block layer to implement upper limit in IO rates on a device.
S
Stephane Eranian 已提交
694

695 696 697 698 699 700
	This option only enables generic Block IO controller infrastructure.
	One needs to also enable actual IO controlling logic/policy. For
	enabling proportional weight division of disk bandwidth in CFQ, set
	CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
	CONFIG_BLK_DEV_THROTTLING=y.

701
	See Documentation/cgroup-v1/blkio-controller.txt for more information.
702 703 704 705 706 707 708 709 710 711 712 713 714

config DEBUG_BLK_CGROUP
	bool "IO controller debugging"
	depends on BLK_CGROUP
	default n
	---help---
	Enable some debugging help. Currently it exports additional stat
	files in a cgroup which can be useful for debugging.

config CGROUP_WRITEBACK
	bool
	depends on MEMCG && BLK_CGROUP
	default y
S
Stephane Eranian 已提交
715

D
Dhaval Giani 已提交
716
menuconfig CGROUP_SCHED
717
	bool "CPU controller"
D
Dhaval Giani 已提交
718 719 720 721 722 723 724 725 726 727 728 729
	default n
	help
	  This feature lets CPU scheduler recognize task groups and control CPU
	  bandwidth allocation to such task groups. It uses cgroups to group
	  tasks.

if CGROUP_SCHED
config FAIR_GROUP_SCHED
	bool "Group scheduling for SCHED_OTHER"
	depends on CGROUP_SCHED
	default CGROUP_SCHED

730 731 732 733 734 735 736 737 738
config CFS_BANDWIDTH
	bool "CPU bandwidth provisioning for FAIR_GROUP_SCHED"
	depends on FAIR_GROUP_SCHED
	default n
	help
	  This option allows users to define CPU bandwidth rates (limits) for
	  tasks running within the fair group scheduler.  Groups with no limit
	  set are considered to be unconstrained and will run with no
	  restriction.
739
	  See Documentation/scheduler/sched-bwc.txt for more information.
740

D
Dhaval Giani 已提交
741 742 743 744 745 746
config RT_GROUP_SCHED
	bool "Group scheduling for SCHED_RR/FIFO"
	depends on CGROUP_SCHED
	default n
	help
	  This feature lets you explicitly allocate real CPU bandwidth
747
	  to task groups. If enabled, it will also make it impossible to
D
Dhaval Giani 已提交
748 749 750 751 752 753
	  schedule realtime tasks for non-root users until you allocate
	  realtime bandwidth for them.
	  See Documentation/scheduler/sched-rt-group.txt for more information.

endif #CGROUP_SCHED

754 755 756 757 758 759 760 761 762
config CGROUP_PIDS
	bool "PIDs controller"
	help
	  Provides enforcement of process number limits in the scope of a
	  cgroup. Any attempt to fork more processes than is allowed in the
	  cgroup will fail. PIDs are fundamentally a global resource because it
	  is fairly trivial to reach PID exhaustion before you reach even a
	  conservative kmemcg limit. As a result, it is possible to grind a
	  system to halt without being limited by other cgroup policies. The
763
	  PIDs controller is designed to stop this from happening.
764 765

	  It should be noted that organisational operations (such as attaching
766
	  to a cgroup hierarchy will *not* be blocked by the PIDs controller),
767 768 769
	  since the PIDs limit only affects a process's ability to fork, not to
	  attach to a cgroup.

770 771 772 773 774 775 776 777 778 779
config CGROUP_RDMA
	bool "RDMA controller"
	help
	  Provides enforcement of RDMA resources defined by IB stack.
	  It is fairly easy for consumers to exhaust RDMA resources, which
	  can result into resource unavailability to other consumers.
	  RDMA controller is designed to stop this from happening.
	  Attaching processes with active RDMA resources to the cgroup
	  hierarchy is allowed even if can cross the hierarchy's limit.

780 781 782 783 784 785
config CGROUP_FREEZER
	bool "Freezer controller"
	help
	  Provides a way to freeze and unfreeze all tasks in a
	  cgroup.

786 787 788 789 790
	  This option affects the ORIGINAL cgroup interface. The cgroup2 memory
	  controller includes important in-kernel memory consumers per default.

	  If you're using cgroup2, say N.

791 792 793 794
config CGROUP_HUGETLB
	bool "HugeTLB controller"
	depends on HUGETLB_PAGE
	select PAGE_COUNTER
795
	default n
796 797 798 799 800 801 802 803 804 805
	help
	  Provides a cgroup controller for HugeTLB pages.
	  When you enable this, you can put a per cgroup limit on HugeTLB usage.
	  The limit is enforced during page fault. Since HugeTLB doesn't
	  support page reclaim, enforcing the limit at page fault time implies
	  that, the application will get SIGBUS signal if it tries to access
	  HugeTLB pages beyond its limit. This requires the application to know
	  beforehand how much HugeTLB pages it would require for its use. The
	  control group is tracked in the third page lru pointer. This means
	  that we cannot use the controller with huge page less than 3 pages.
806

807 808
config CPUSETS
	bool "Cpuset controller"
809
	depends on SMP
810 811 812 813 814
	help
	  This option will let you create and manage CPUSETs which
	  allow dynamically partitioning a system into sets of CPUs and
	  Memory Nodes and assigning tasks to run only within those sets.
	  This is primarily useful on large SMP or NUMA systems.
815

816
	  Say N if unsure.
817

818 819 820 821
config PROC_PID_CPUSET
	bool "Include legacy /proc/<pid>/cpuset file"
	depends on CPUSETS
	default y
822

823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844
config CGROUP_DEVICE
	bool "Device controller"
	help
	  Provides a cgroup controller implementing whitelists for
	  devices which a process in the cgroup can mknod or open.

config CGROUP_CPUACCT
	bool "Simple CPU accounting controller"
	help
	  Provides a simple controller for monitoring the
	  total CPU consumed by the tasks in a cgroup.

config CGROUP_PERF
	bool "Perf controller"
	depends on PERF_EVENTS
	help
	  This option extends the perf per-cpu mode to restrict monitoring
	  to threads which belong to the cgroup specified and run on the
	  designated cpu.

	  Say N if unsure.

845 846
config CGROUP_BPF
	bool "Support for eBPF programs attached to cgroups"
A
Andy Lutomirski 已提交
847 848
	depends on BPF_SYSCALL
	select SOCK_CGROUP_DATA
849 850 851 852 853 854 855 856 857
	help
	  Allow attaching eBPF programs to a cgroup using the bpf(2)
	  syscall command BPF_PROG_ATTACH.

	  In which context these programs are accessed depends on the type
	  of attachment. For instance, programs that are attached using
	  BPF_CGROUP_INET_INGRESS will be executed on the ingress path of
	  inet sockets.

858
config CGROUP_DEBUG
859
	bool "Debug controller"
860
	default n
861
	depends on DEBUG_KERNEL
862 863
	help
	  This option enables a simple controller that exports
864 865 866
	  debugging information about the cgroups framework. This
	  controller is for control cgroup debugging only. Its
	  interfaces are not stable.
867

868
	  Say N.
869

870 871 872 873
config SOCK_CGROUP_DATA
	bool
	default n

L
Li Zefan 已提交
874
endif # CGROUPS
875

876
menuconfig NAMESPACES
877
	bool "Namespaces support" if EXPERT
878
	depends on MULTIUSER
879
	default !EXPERT
880 881 882 883 884 885
	help
	  Provides the way to make tasks work with different objects using
	  the same id. For example same IPC id may refer to different objects
	  or same user id or pid may refer to different tasks when used in
	  different namespaces.

886 887
if NAMESPACES

888 889
config UTS_NS
	bool "UTS namespace"
890
	default y
891 892 893 894
	help
	  In this namespace tasks see different info provided with the
	  uname() system call

895 896
config IPC_NS
	bool "IPC namespace"
897
	depends on (SYSVIPC || POSIX_MQUEUE)
898
	default y
899 900
	help
	  In this namespace tasks work with IPC ids which correspond to
901
	  different IPC objects in different namespaces.
902

903
config USER_NS
904
	bool "User namespace"
905
	default n
906 907 908
	help
	  This allows containers, i.e. vservers, to use user namespaces
	  to provide different user info for different servers.
909 910

	  When user namespaces are enabled in the kernel it is
911 912 913
	  recommended that the MEMCG option also be enabled and that
	  user-space use the memory control groups to limit the amount
	  of memory a memory unprivileged users can use.
914

915 916
	  If unsure, say N.

917
config PID_NS
918
	bool "PID Namespaces"
919
	default y
920
	help
921
	  Support process id namespaces.  This allows having multiple
922
	  processes with the same pid as long as they are in different
923 924
	  pid namespaces.  This is a building block of containers.

925 926
config NET_NS
	bool "Network namespace"
927
	depends on NET
928
	default y
929 930 931 932
	help
	  Allow user space to create what appear to be multiple instances
	  of the network stack.

933 934
endif # NAMESPACES

935 936 937 938 939 940 941 942 943 944 945 946
config SCHED_AUTOGROUP
	bool "Automatic process group scheduling"
	select CGROUPS
	select CGROUP_SCHED
	select FAIR_GROUP_SCHED
	help
	  This option optimizes the scheduler for common desktop workloads by
	  automatically creating and populating task groups.  This separation
	  of workloads isolates aggressive CPU burners (like build jobs) from
	  desktop applications.  Task group autogeneration is currently based
	  upon task session.

947
config SYSFS_DEPRECATED
948
	bool "Enable deprecated sysfs features to support old userspace tools"
949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970
	depends on SYSFS
	default n
	help
	  This option adds code that switches the layout of the "block" class
	  devices, to not show up in /sys/class/block/, but only in
	  /sys/block/.

	  This switch is only active when the sysfs.deprecated=1 boot option is
	  passed or the SYSFS_DEPRECATED_V2 option is set.

	  This option allows new kernels to run on old distributions and tools,
	  which might get confused by /sys/class/block/. Since 2007/2008 all
	  major distributions and tools handle this just fine.

	  Recent distributions and userspace tools after 2009/2010 depend on
	  the existence of /sys/class/block/, and will not work with this
	  option enabled.

	  Only if you are using a new kernel on an old distribution, you might
	  need to say Y here.

config SYSFS_DEPRECATED_V2
971
	bool "Enable deprecated sysfs features by default"
972 973 974 975 976 977 978 979 980 981 982 983 984 985 986
	default n
	depends on SYSFS
	depends on SYSFS_DEPRECATED
	help
	  Enable deprecated sysfs by default.

	  See the CONFIG_SYSFS_DEPRECATED option for more details about this
	  option.

	  Only if you are using a new kernel on an old distribution, you might
	  need to say Y here. Even then, odds are you would not need it
	  enabled, you can always pass the boot option if absolutely necessary.

config RELAY
	bool "Kernel->user space relay support (formerly relayfs)"
987
	select IRQ_WORK
988 989 990 991 992 993 994 995 996
	help
	  This option enables support for relay interface support in
	  certain file systems (such as debugfs).
	  It is designed to provide an efficient mechanism for tools and
	  facilities to relay large amounts of data from kernel space to
	  user space.

	  If unsure, say N.

997 998 999 1000 1001 1002 1003
config BLK_DEV_INITRD
	bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support"
	help
	  The initial RAM filesystem is a ramfs which is loaded by the
	  boot loader (loadlin or lilo) and that is mounted as root
	  before the normal boot procedure. It is typically used to
	  load modules needed to mount the "real" root file system,
1004
	  etc. See <file:Documentation/admin-guide/initrd.rst> for details.
1005 1006 1007 1008 1009 1010 1011

	  If RAM disk support (BLK_DEV_RAM) is also included, this
	  also enables initial RAM disk (initrd) support and adds
	  15 Kbytes (more on some other architectures) to the kernel size.

	  If unsure say Y.

1012 1013
if BLK_DEV_INITRD

1014 1015
source "usr/Kconfig"

1016 1017
endif

1018 1019
choice
	prompt "Compiler optimization level"
1020
	default CC_OPTIMIZE_FOR_PERFORMANCE
1021 1022 1023 1024 1025 1026 1027 1028

config CC_OPTIMIZE_FOR_PERFORMANCE
	bool "Optimize for performance"
	help
	  This is the default optimization level for the kernel, building
	  with the "-O2" compiler flag for best performance and most
	  helpful compile-time warnings.

1029
config CC_OPTIMIZE_FOR_SIZE
1030
	bool "Optimize for size"
1031
	help
1032 1033
	  Enabling this option will pass "-Os" instead of "-O2" to
	  your compiler resulting in a smaller kernel.
1034

1035
	  If unsure, say N.
1036

1037 1038
endchoice

1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065
config HAVE_LD_DEAD_CODE_DATA_ELIMINATION
	bool
	help
	  This requires that the arch annotates or otherwise protects
	  its external entry points from being discarded. Linker scripts
	  must also merge .text.*, .data.*, and .bss.* correctly into
	  output sections. Care must be taken not to pull in unrelated
	  sections (e.g., '.text.init'). Typically '.' in section names
	  is used to distinguish them from label names / C identifiers.

config LD_DEAD_CODE_DATA_ELIMINATION
	bool "Dead code and data elimination (EXPERIMENTAL)"
	depends on HAVE_LD_DEAD_CODE_DATA_ELIMINATION
	depends on EXPERT
	help
	  Select this if the architecture wants to do dead code and
	  data elimination with the linker by compiling with
	  -ffunction-sections -fdata-sections, and linking with
	  --gc-sections.

	  This can reduce on disk and in-memory size of the kernel
	  code and static data, particularly for small configs and
	  on small systems. This has the possibility of introducing
	  silently broken kernel if the required annotations are not
	  present. This option is not well tested yet, so use at your
	  own risk.

R
Randy Dunlap 已提交
1066 1067 1068
config SYSCTL
	bool

R
Randy Dunlap 已提交
1069 1070 1071
config ANON_INODES
	bool

1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097
config HAVE_UID16
	bool

config SYSCTL_EXCEPTION_TRACE
	bool
	help
	  Enable support for /proc/sys/debug/exception-trace.

config SYSCTL_ARCH_UNALIGN_NO_WARN
	bool
	help
	  Enable support for /proc/sys/kernel/ignore-unaligned-usertrap
	  Allows arch to define/use @no_unaligned_warning to possibly warn
	  about unaligned access emulation going on under the hood.

config SYSCTL_ARCH_UNALIGN_ALLOW
	bool
	help
	  Enable support for /proc/sys/kernel/unaligned-trap
	  Allows arches to define/use @unaligned_enabled to runtime toggle
	  the unaligned access emulation.
	  see arch/parisc/kernel/unaligned.c for reference

config HAVE_PCSPKR_PLATFORM
	bool

A
Alexei Starovoitov 已提交
1098 1099 1100 1101
# interpreter that classic socket filters depend on
config BPF
	bool

1102 1103
menuconfig EXPERT
	bool "Configure standard kernel features (expert users)"
1104 1105
	# Unhide debug options, to make the on-by-default options visible
	select DEBUG_KERNEL
L
Linus Torvalds 已提交
1106 1107 1108 1109 1110 1111
	help
	  This option allows certain base kernel options and settings
          to be disabled or tweaked. This is for specialized
          environments which can tolerate a "non-standard" kernel.
          Only use this if you really know what you are doing.

1112
config UID16
1113
	bool "Enable 16-bit UID system calls" if EXPERT
1114
	depends on HAVE_UID16 && MULTIUSER
1115 1116 1117 1118
	default y
	help
	  This enables the legacy 16-bit UID syscall wrappers.

1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132
config MULTIUSER
	bool "Multiple users, groups and capabilities support" if EXPERT
	default y
	help
	  This option enables support for non-root users, groups and
	  capabilities.

	  If you say N here, all processes will run with UID 0, GID 0, and all
	  possible capabilities.  Saying N here also compiles out support for
	  system calls related to UIDs, GIDs, and capabilities, such as setuid,
	  setgid, and capset.

	  If unsure, say Y here.

1133 1134
config SGETMASK_SYSCALL
	bool "sgetmask/ssetmask syscalls support" if EXPERT
1135
	def_bool PARISC || M68K || PPC || MIPS || X86 || SPARC || MICROBLAZE || SUPERH
1136 1137 1138 1139 1140 1141 1142
	---help---
	  sys_sgetmask and sys_ssetmask are obsolete system calls
	  no longer supported in libc but still enabled by default in some
	  architectures.

	  If unsure, leave the default option here.

1143 1144 1145 1146 1147 1148 1149 1150 1151 1152
config SYSFS_SYSCALL
	bool "Sysfs syscall support" if EXPERT
	default y
	---help---
	  sys_sysfs is an obsolete system call no longer supported in libc.
	  Note that disabling this option is more secure but might break
	  compatibility with some systems.

	  If unsure say Y here.

1153
config SYSCTL_SYSCALL
1154
	bool "Sysctl syscall support" if EXPERT
1155
	depends on PROC_SYSCTL
1156
	default n
1157
	select SYSCTL
1158
	---help---
1159 1160 1161 1162
	  sys_sysctl uses binary paths that have been found challenging
	  to properly maintain and use.  The interface in /proc/sys
	  using paths with ascii names is now the primary path to this
	  information.
1163

1164 1165 1166
	  Almost nothing using the binary sysctl interface so if you are
	  trying to save some space it is probably safe to disable this,
	  making your kernel marginally smaller.
1167

1168
	  If unsure say N here.
1169

1170 1171 1172 1173 1174 1175 1176 1177 1178 1179 1180 1181 1182
config FHANDLE
	bool "open by fhandle syscalls" if EXPERT
	select EXPORTFS
	default y
	help
	  If you say Y here, a user level program will be able to map
	  file names to handle and then later use the handle for
	  different file system operations. This is useful in implementing
	  userspace file servers, which now track files using handles instead
	  of names. The handle would remain the same even if file names
	  get renamed. Enables open_by_handle_at(2) and name_to_handle_at(2)
	  syscalls.

1183 1184 1185 1186 1187 1188 1189 1190 1191 1192 1193 1194 1195 1196 1197 1198 1199
config POSIX_TIMERS
	bool "Posix Clocks & timers" if EXPERT
	default y
	help
	  This includes native support for POSIX timers to the kernel.
	  Some embedded systems have no use for them and therefore they
	  can be configured out to reduce the size of the kernel image.

	  When this option is disabled, the following syscalls won't be
	  available: timer_create, timer_gettime: timer_getoverrun,
	  timer_settime, timer_delete, clock_adjtime, getitimer,
	  setitimer, alarm. Furthermore, the clock_settime, clock_gettime,
	  clock_getres and clock_nanosleep syscalls will be limited to
	  CLOCK_REALTIME, CLOCK_MONOTONIC and CLOCK_BOOTTIME only.

	  If unsure say y.

M
Matt Mackall 已提交
1200 1201
config PRINTK
	default y
1202
	bool "Enable support for printk" if EXPERT
1203
	select IRQ_WORK
M
Matt Mackall 已提交
1204 1205 1206 1207 1208 1209 1210
	help
	  This option enables normal printk support. Removing it
	  eliminates most of the message strings from the kernel image
	  and makes the kernel more or less silent. As this makes it
	  very difficult to diagnose system problems, saying N here is
	  strongly discouraged.

1211 1212 1213 1214 1215
config PRINTK_NMI
	def_bool y
	depends on PRINTK
	depends on HAVE_NMI

M
Matt Mackall 已提交
1216
config BUG
1217
	bool "BUG() support" if EXPERT
M
Matt Mackall 已提交
1218 1219 1220 1221 1222 1223 1224 1225
	default y
	help
          Disabling this option eliminates support for BUG and WARN, reducing
          the size of your kernel image and potentially quietly ignoring
          numerous fatal conditions. You should only consider disabling this
          option for embedded systems with no facilities for reporting errors.
          Just say Y.

1226
config ELF_CORE
1227
	depends on COREDUMP
1228
	default y
1229
	bool "Enable ELF core dumps" if EXPERT
1230 1231 1232
	help
	  Enable support for generating core dumps. Disabling saves about 4k.

1233

S
Stas Sergeev 已提交
1234
config PCSPKR_PLATFORM
1235
	bool "Enable PC-Speaker support" if EXPERT
1236
	depends on HAVE_PCSPKR_PLATFORM
1237
	select I8253_LOCK
S
Stas Sergeev 已提交
1238 1239 1240 1241 1242
	default y
	help
          This option allows to disable the internal PC-Speaker
          support, saving some memory.

L
Linus Torvalds 已提交
1243 1244
config BASE_FULL
	default y
1245
	bool "Enable full-sized data structures for core" if EXPERT
L
Linus Torvalds 已提交
1246 1247 1248 1249 1250 1251
	help
	  Disabling this option reduces the size of miscellaneous core
	  kernel data structures. This saves memory on small machines,
	  but may reduce performance.

config FUTEX
1252
	bool "Enable futex support" if EXPERT
L
Linus Torvalds 已提交
1253
	default y
1254
	imply RT_MUTEXES
L
Linus Torvalds 已提交
1255 1256 1257 1258 1259
	help
	  Disabling this option will cause the kernel to be built without
	  support for "fast userspace mutexes".  The resulting kernel may not
	  run glibc-based applications correctly.

1260 1261 1262 1263 1264
config FUTEX_PI
	bool
	depends on FUTEX && RT_MUTEXES
	default y

1265 1266
config HAVE_FUTEX_CMPXCHG
	bool
1267
	depends on FUTEX
1268 1269 1270 1271 1272
	help
	  Architectures should select this if futex_atomic_cmpxchg_inatomic()
	  is implemented and always working. This removes a couple of runtime
	  checks.

L
Linus Torvalds 已提交
1273
config EPOLL
1274
	bool "Enable eventpoll support" if EXPERT
L
Linus Torvalds 已提交
1275
	default y
1276
	select ANON_INODES
L
Linus Torvalds 已提交
1277 1278 1279 1280
	help
	  Disabling this option will cause the kernel to be built without
	  support for epoll family of system calls.

1281
config SIGNALFD
1282
	bool "Enable signalfd() system call" if EXPERT
1283
	select ANON_INODES
1284 1285 1286 1287 1288 1289 1290
	default y
	help
	  Enable the signalfd() system call that allows to receive signals
	  on a file descriptor.

	  If unsure, say Y.

1291
config TIMERFD
1292
	bool "Enable timerfd() system call" if EXPERT
1293
	select ANON_INODES
1294 1295 1296 1297 1298 1299 1300
	default y
	help
	  Enable the timerfd() system call that allows to receive timer
	  events on a file descriptor.

	  If unsure, say Y.

1301
config EVENTFD
1302
	bool "Enable eventfd() system call" if EXPERT
1303
	select ANON_INODES
1304 1305 1306 1307 1308 1309 1310
	default y
	help
	  Enable the eventfd() system call that allows to receive both
	  kernel notification (ie. KAIO) or userspace notifications.

	  If unsure, say Y.

L
Linus Torvalds 已提交
1311
config SHMEM
1312
	bool "Use full shmem filesystem" if EXPERT
L
Linus Torvalds 已提交
1313 1314 1315 1316 1317 1318 1319 1320 1321
	default y
	depends on MMU
	help
	  The shmem is an internal filesystem used to manage shared memory.
	  It is backed by swap and manages resource limits. It is also exported
	  to userspace as tmpfs if TMPFS is enabled. Disabling this
	  option replaces shmem and tmpfs with the much simpler ramfs code,
	  which may be appropriate on small systems without swap.

T
Thomas Petazzoni 已提交
1322
config AIO
1323
	bool "Enable AIO support" if EXPERT
T
Thomas Petazzoni 已提交
1324 1325 1326
	default y
	help
	  This option enables POSIX asynchronous I/O which may by used
1327 1328 1329
	  by some high performance threaded applications. Disabling
	  this option saves about 7k.

1330 1331 1332 1333 1334 1335 1336 1337 1338 1339
config ADVISE_SYSCALLS
	bool "Enable madvise/fadvise syscalls" if EXPERT
	default y
	help
	  This option enables the madvise and fadvise syscalls, used by
	  applications to advise the kernel about their future memory or file
	  usage, improving performance. If building an embedded system where no
	  applications use these syscalls, you can disable this option to save
	  space.

1340 1341 1342 1343 1344 1345 1346 1347 1348 1349 1350 1351
config MEMBARRIER
	bool "Enable membarrier() system call" if EXPERT
	default y
	help
	  Enable the membarrier() system call that allows issuing memory
	  barriers across all running threads, which can be used to distribute
	  the cost of user-space memory barriers asymmetrically by transforming
	  pairs of memory barriers into pairs consisting of membarrier() and a
	  compiler barrier.

	  If unsure, say Y.

1352 1353 1354 1355 1356 1357 1358 1359 1360 1361 1362 1363 1364 1365 1366 1367 1368 1369 1370 1371 1372 1373 1374 1375 1376 1377 1378 1379 1380 1381 1382 1383 1384 1385 1386 1387 1388 1389 1390 1391 1392 1393 1394 1395 1396
config CHECKPOINT_RESTORE
	bool "Checkpoint/restore support" if EXPERT
	select PROC_CHILDREN
	default n
	help
	  Enables additional kernel features in a sake of checkpoint/restore.
	  In particular it adds auxiliary prctl codes to setup process text,
	  data and heap segment sizes, and a few additional /proc filesystem
	  entries.

	  If unsure, say N here.

config KALLSYMS
	 bool "Load all symbols for debugging/ksymoops" if EXPERT
	 default y
	 help
	   Say Y here to let the kernel print out symbolic crash information and
	   symbolic stack backtraces. This increases the size of the kernel
	   somewhat, as all symbols have to be loaded into the kernel image.

config KALLSYMS_ALL
	bool "Include all symbols in kallsyms"
	depends on DEBUG_KERNEL && KALLSYMS
	help
	   Normally kallsyms only contains the symbols of functions for nicer
	   OOPS messages and backtraces (i.e., symbols from the text and inittext
	   sections). This is sufficient for most cases. And only in very rare
	   cases (e.g., when a debugger is used) all symbols are required (e.g.,
	   names of variables from the data sections, etc).

	   This option makes sure that all symbols are loaded into the kernel
	   image (i.e., symbols from all sections) in cost of increased kernel
	   size (depending on the kernel configuration, it may be 300KiB or
	   something like this).

	   Say N unless you really need all symbols.

config KALLSYMS_ABSOLUTE_PERCPU
	bool
	depends on KALLSYMS
	default X86_64 && SMP

config KALLSYMS_BASE_RELATIVE
	bool
	depends on KALLSYMS
1397
	default !IA64
1398 1399 1400 1401 1402 1403 1404 1405 1406 1407 1408 1409 1410 1411 1412 1413 1414 1415 1416 1417 1418
	help
	  Instead of emitting them as absolute values in the native word size,
	  emit the symbol references in the kallsyms table as 32-bit entries,
	  each containing a relative value in the range [base, base + U32_MAX]
	  or, when KALLSYMS_ABSOLUTE_PERCPU is in effect, each containing either
	  an absolute value in the range [0, S32_MAX] or a relative value in the
	  range [base, base + S32_MAX], where base is the lowest relative symbol
	  address encountered in the image.

	  On 64-bit builds, this reduces the size of the address table by 50%,
	  but more importantly, it results in entries whose values are build
	  time constants, and no relocation pass is required at runtime to fix
	  up the entries based on the runtime load address of the kernel.

# end of the "standard kernel features (expert users)" menu

# syscall, maps, verifier
config BPF_SYSCALL
	bool "Enable bpf() system call"
	select ANON_INODES
	select BPF
1419
	select IRQ_WORK
1420 1421 1422 1423 1424
	default n
	help
	  Enable the bpf() system call that allows to manipulate eBPF
	  programs and maps via file descriptors.

1425 1426 1427 1428 1429 1430 1431
config BPF_JIT_ALWAYS_ON
	bool "Permanently enable BPF JIT and remove BPF interpreter"
	depends on BPF_SYSCALL && HAVE_EBPF_JIT && BPF_JIT
	help
	  Enables BPF JIT and removes BPF interpreter to avoid
	  speculative execution of BPF instructions by the interpreter

1432 1433 1434 1435 1436 1437 1438 1439
config USERFAULTFD
	bool "Enable userfaultfd() system call"
	select ANON_INODES
	depends on MMU
	help
	  Enable the userfaultfd() system call that allows to intercept and
	  handle page faults in userland.

1440 1441 1442
config ARCH_HAS_MEMBARRIER_CALLBACKS
	bool

1443 1444 1445
config ARCH_HAS_MEMBARRIER_SYNC_CORE
	bool

1446 1447 1448 1449 1450 1451 1452 1453 1454 1455 1456 1457 1458 1459 1460 1461 1462 1463 1464 1465 1466 1467 1468
config RSEQ
	bool "Enable rseq() system call" if EXPERT
	default y
	depends on HAVE_RSEQ
	select MEMBARRIER
	help
	  Enable the restartable sequences system call. It provides a
	  user-space cache for the current CPU number value, which
	  speeds up getting the current CPU number from user-space,
	  as well as an ABI to speed up user-space operations on
	  per-CPU data.

	  If unsure, say Y.

config DEBUG_RSEQ
	default n
	bool "Enabled debugging of rseq() system call" if EXPERT
	depends on RSEQ && DEBUG_KERNEL
	help
	  Enable extra debugging checks for the rseq system call.

	  If unsure, say N.

1469 1470
config EMBEDDED
	bool "Embedded system"
1471
	option allnoconfig_y
1472 1473 1474 1475 1476 1477
	select EXPERT
	help
	  This option should be enabled if compiling the kernel for
	  an embedded system so certain expert options are available
	  for configuration.

1478
config HAVE_PERF_EVENTS
T
Thomas Gleixner 已提交
1479
	bool
1480 1481
	help
	  See tools/perf/design.txt for details.
T
Thomas Gleixner 已提交
1482

1483 1484 1485 1486 1487
config PERF_USE_VMALLOC
	bool
	help
	  See tools/perf/design.txt for details

1488
config PC104
1489
	bool "PC/104 support" if EXPERT
1490 1491 1492 1493 1494
	help
	  Expose PC/104 form factor device drivers and options available for
	  selection and configuration. Enable this option if your target
	  machine has a PC/104 bus.

I
Ingo Molnar 已提交
1495
menu "Kernel Performance Events And Counters"
T
Thomas Gleixner 已提交
1496

1497
config PERF_EVENTS
I
Ingo Molnar 已提交
1498
	bool "Kernel performance events and counters"
1499
	default y if PROFILING
1500
	depends on HAVE_PERF_EVENTS
I
Ingo Molnar 已提交
1501
	select ANON_INODES
1502
	select IRQ_WORK
1503
	select SRCU
T
Thomas Gleixner 已提交
1504
	help
I
Ingo Molnar 已提交
1505 1506
	  Enable kernel support for various performance events provided
	  by software and hardware.
T
Thomas Gleixner 已提交
1507

1508
	  Software events are supported either built-in or via the
I
Ingo Molnar 已提交
1509
	  use of generic tracepoints.
T
Thomas Gleixner 已提交
1510

I
Ingo Molnar 已提交
1511 1512
	  Most modern CPUs support performance events via performance
	  counter registers. These registers count the number of certain
T
Thomas Gleixner 已提交
1513 1514 1515 1516 1517 1518
	  types of hw events: such as instructions executed, cachemisses
	  suffered, or branches mis-predicted - without slowing down the
	  kernel or applications. These registers can also trigger interrupts
	  when a threshold number of events have passed - and can thus be
	  used to profile the code that runs on that CPU.

I
Ingo Molnar 已提交
1519
	  The Linux Performance Event subsystem provides an abstraction of
1520
	  these software and hardware event capabilities, available via a
I
Ingo Molnar 已提交
1521
	  system call and used by the "perf" utility in tools/perf/. It
T
Thomas Gleixner 已提交
1522 1523 1524 1525 1526
	  provides per task and per CPU counters, and it provides event
	  capabilities on top of those.

	  Say Y if unsure.

1527 1528 1529
config DEBUG_PERF_USE_VMALLOC
	default n
	bool "Debug: use vmalloc to back perf mmap() buffers"
1530
	depends on PERF_EVENTS && DEBUG_KERNEL && !PPC
1531 1532 1533 1534 1535 1536 1537 1538 1539
	select PERF_USE_VMALLOC
	help
	 Use vmalloc memory to back perf mmap() buffers.

	 Mostly useful for debugging the vmalloc code on platforms
	 that don't require it.

	 Say N if unsure.

T
Thomas Gleixner 已提交
1540 1541
endmenu

1542 1543
config VM_EVENT_COUNTERS
	default y
1544
	bool "Enable VM event counters for /proc/vmstat" if EXPERT
1545
	help
1546 1547
	  VM event counters are needed for event counts to be shown.
	  This option allows the disabling of the VM event counters
1548
	  on EXPERT systems.  /proc/vmstat will only show page counts
1549
	  if VM event counters are disabled.
1550

C
Christoph Lameter 已提交
1551 1552
config SLUB_DEBUG
	default y
1553
	bool "Enable SLUB debugging support" if EXPERT
C
Christoph Lameter 已提交
1554
	depends on SLUB && SYSFS
C
Christoph Lameter 已提交
1555 1556 1557 1558 1559 1560
	help
	  SLUB has extensive debug support features. Disabling these can
	  result in significant savings in code size. This also disables
	  SLUB sysfs support. /sys/slab will not exist and there will be
	  no support for cache validation etc.

1561 1562 1563 1564 1565 1566 1567 1568 1569 1570 1571 1572 1573 1574
config SLUB_MEMCG_SYSFS_ON
	default n
	bool "Enable memcg SLUB sysfs support by default" if EXPERT
	depends on SLUB && SYSFS && MEMCG
	help
	  SLUB creates a directory under /sys/kernel/slab for each
	  allocation cache to host info and debug files. If memory
	  cgroup is enabled, each cache can have per memory cgroup
	  caches. SLUB can create the same sysfs directories for these
	  caches under /sys/kernel/slab/CACHE/cgroup but it can lead
	  to a very high number of debug files being created. This is
	  controlled by slub_memcg_sysfs boot parameter and this
	  config option determines the parameter's default value.

R
Randy Dunlap 已提交
1575 1576 1577 1578 1579 1580 1581
config COMPAT_BRK
	bool "Disable heap randomization"
	default y
	help
	  Randomizing heap placement makes heap exploits harder, but it
	  also breaks ancient binaries (including anything libc5 based).
	  This option changes the bootup default to heap randomization
1582
	  disabled, and can be overridden at runtime by setting
R
Randy Dunlap 已提交
1583 1584 1585 1586
	  /proc/sys/kernel/randomize_va_space to 2.

	  On non-ancient distros (post-2000 ones) N is usually a safe choice.

C
Christoph Lameter 已提交
1587 1588
choice
	prompt "Choose SLAB allocator"
1589
	default SLUB
C
Christoph Lameter 已提交
1590 1591 1592 1593 1594
	help
	   This option allows to select a slab allocator.

config SLAB
	bool "SLAB"
K
Kees Cook 已提交
1595
	select HAVE_HARDENED_USERCOPY_ALLOCATOR
C
Christoph Lameter 已提交
1596 1597
	help
	  The regular slab allocator that is established and known to work
1598
	  well in all environments. It organizes cache hot objects in
1599
	  per cpu and per node queues.
C
Christoph Lameter 已提交
1600 1601 1602

config SLUB
	bool "SLUB (Unqueued Allocator)"
K
Kees Cook 已提交
1603
	select HAVE_HARDENED_USERCOPY_ALLOCATOR
C
Christoph Lameter 已提交
1604 1605 1606 1607 1608
	help
	   SLUB is a slab allocator that minimizes cache line usage
	   instead of managing queues of cached objects (SLAB approach).
	   Per cpu caching is realized using slabs of objects instead
	   of queues of objects. SLUB can use memory efficiently
1609 1610
	   and has enhanced diagnostics. SLUB is the default choice for
	   a slab allocator.
C
Christoph Lameter 已提交
1611 1612

config SLOB
1613
	depends on EXPERT
C
Christoph Lameter 已提交
1614 1615
	bool "SLOB (Simple Allocator)"
	help
M
Matt Mackall 已提交
1616 1617 1618
	   SLOB replaces the stock allocator with a drastically simpler
	   allocator. SLOB is generally more space efficient but
	   does not perform as well on large systems.
C
Christoph Lameter 已提交
1619 1620 1621

endchoice

1622 1623 1624 1625 1626 1627 1628 1629 1630 1631 1632 1633 1634 1635
config SLAB_MERGE_DEFAULT
	bool "Allow slab caches to be merged"
	default y
	help
	  For reduced kernel memory fragmentation, slab caches can be
	  merged when they share the same size and other characteristics.
	  This carries a risk of kernel heap overflows being able to
	  overwrite objects from merged caches (and more easily control
	  cache layout), which makes such heap attacks easier to exploit
	  by attackers. By keeping caches unmerged, these kinds of exploits
	  can usually only damage objects in the same cache. To disable
	  merging at runtime, "slab_nomerge" can be passed on the kernel
	  command line.

T
Thomas Garnier 已提交
1636 1637
config SLAB_FREELIST_RANDOM
	default n
T
Thomas Garnier 已提交
1638
	depends on SLAB || SLUB
T
Thomas Garnier 已提交
1639 1640
	bool "SLAB freelist randomization"
	help
T
Thomas Garnier 已提交
1641
	  Randomizes the freelist order used on creating new pages. This
T
Thomas Garnier 已提交
1642 1643 1644
	  security feature reduces the predictability of the kernel slab
	  allocator against heap overflows.

1645 1646 1647 1648 1649 1650 1651 1652 1653
config SLAB_FREELIST_HARDENED
	bool "Harden slab freelist metadata"
	depends on SLUB
	help
	  Many kernel heap attacks try to target slab cache metadata and
	  other infrastructure. This options makes minor performance
	  sacrifies to harden the kernel slab allocator against common
	  freelist exploit methods.

1654 1655
config SLUB_CPU_PARTIAL
	default y
1656
	depends on SLUB && SMP
1657 1658 1659 1660 1661 1662 1663 1664
	bool "SLUB per cpu partial cache"
	help
	  Per cpu partial caches accellerate objects allocation and freeing
	  that is local to a processor at the price of more indeterminism
	  in the latency of the free. On overflow these caches will be cleared
	  which requires the taking of locks that may cause latency spikes.
	  Typically one would choose no for a realtime system.

1665 1666
config MMAP_ALLOW_UNINITIALIZED
	bool "Allow mmapped anonymous memory to be uninitialized"
1667
	depends on EXPERT && !MMU
1668 1669 1670 1671 1672 1673 1674 1675 1676 1677 1678 1679 1680 1681 1682 1683 1684 1685 1686
	default n
	help
	  Normally, and according to the Linux spec, anonymous memory obtained
	  from mmap() has it's contents cleared before it is passed to
	  userspace.  Enabling this config option allows you to request that
	  mmap() skip that if it is given an MAP_UNINITIALIZED flag, thus
	  providing a huge performance boost.  If this option is not enabled,
	  then the flag will be ignored.

	  This is taken advantage of by uClibc's malloc(), and also by
	  ELF-FDPIC binfmt's brk and stack allocator.

	  Because of the obvious security issues, this option should only be
	  enabled on embedded devices where you control what is run in
	  userspace.  Since that isn't generally a problem on no-MMU systems,
	  it is normally safe to say Y here.

	  See Documentation/nommu-mmap.txt for more information.

1687 1688 1689 1690 1691
config SYSTEM_DATA_VERIFICATION
	def_bool n
	select SYSTEM_TRUSTED_KEYRING
	select KEYS
	select CRYPTO
1692
	select CRYPTO_RSA
1693 1694 1695 1696 1697 1698
	select ASYMMETRIC_KEY_TYPE
	select ASYMMETRIC_PUBLIC_KEY_SUBTYPE
	select ASN1
	select OID_REGISTRY
	select X509_CERTIFICATE_PARSER
	select PKCS7_MESSAGE_PARSER
1699
	help
1700 1701 1702 1703
	  Provide PKCS#7 message verification using the contents of the system
	  trusted keyring to provide public keys.  This then can be used for
	  module verification, kexec image verification and firmware blob
	  verification.
1704

1705
config PROFILING
1706
	bool "Profiling support"
1707 1708 1709 1710
	help
	  Say Y here to enable the extended profiling support mechanisms used
	  by profilers such as OProfile.

1711 1712 1713 1714
#
# Place an empty function call at each tracepoint site. Can be
# dynamically changed for a probe function.
#
M
Mathieu Desnoyers 已提交
1715
config TRACEPOINTS
1716
	bool
M
Mathieu Desnoyers 已提交
1717

M
Mathieu Desnoyers 已提交
1718 1719
source "arch/Kconfig"

L
Linus Torvalds 已提交
1720 1721
endmenu		# General setup

1722
config RT_MUTEXES
1723
	bool
1724

L
Linus Torvalds 已提交
1725 1726 1727 1728 1729
config BASE_SMALL
	int
	default 0 if BASE_FULL
	default 1 if !BASE_FULL

1730
menuconfig MODULES
L
Linus Torvalds 已提交
1731
	bool "Enable loadable module support"
1732
	option modules
L
Linus Torvalds 已提交
1733 1734 1735 1736 1737 1738 1739 1740 1741 1742 1743 1744 1745 1746 1747 1748 1749 1750
	help
	  Kernel modules are small pieces of compiled code which can
	  be inserted in the running kernel, rather than being
	  permanently built into the kernel.  You use the "modprobe"
	  tool to add (and sometimes remove) them.  If you say Y here,
	  many parts of the kernel can be built as modules (by
	  answering M instead of Y where indicated): this is most
	  useful for infrequently used options which are not required
	  for booting.  For more information, see the man pages for
	  modprobe, lsmod, modinfo, insmod and rmmod.

	  If you say Y here, you will need to run "make
	  modules_install" to put the modules under /lib/modules/
	  where modprobe can find them (you may need to be root to do
	  this).

	  If unsure, say Y.

1751 1752
if MODULES

1753 1754 1755 1756
config MODULE_FORCE_LOAD
	bool "Forced module loading"
	default n
	help
1757 1758 1759
	  Allow loading of modules without version information (ie. modprobe
	  --force).  Forced module loading sets the 'F' (forced) taint flag and
	  is usually a really bad idea.
1760

L
Linus Torvalds 已提交
1761 1762 1763 1764 1765
config MODULE_UNLOAD
	bool "Module unloading"
	help
	  Without this option you will not be able to unload any
	  modules (note that some modules may not be unloadable
1766 1767
	  anyway), which makes your kernel smaller, faster
	  and simpler.  If unsure, say Y.
L
Linus Torvalds 已提交
1768 1769 1770

config MODULE_FORCE_UNLOAD
	bool "Forced module unloading"
1771
	depends on MODULE_UNLOAD
L
Linus Torvalds 已提交
1772 1773 1774 1775 1776 1777 1778 1779
	help
	  This option allows you to force a module to unload, even if the
	  kernel believes it is unsafe: the kernel will remove the module
	  without waiting for anyone to stop using it (using the -f option to
	  rmmod).  This is mainly for kernel developers and desperate users.
	  If unsure, say N.

config MODVERSIONS
1780
	bool "Module versioning support"
L
Linus Torvalds 已提交
1781 1782 1783 1784 1785 1786 1787 1788
	help
	  Usually, you have to use modules compiled with your kernel.
	  Saying Y here makes it sometimes possible to use modules
	  compiled for different kernels, by adding enough information
	  to the modules to (hopefully) spot any changes which would
	  make them incompatible with the kernel you are running.  If
	  unsure, say N.

1789 1790 1791 1792
config MODULE_REL_CRCS
	bool
	depends on MODVERSIONS

L
Linus Torvalds 已提交
1793 1794 1795 1796 1797 1798 1799 1800 1801 1802 1803
config MODULE_SRCVERSION_ALL
	bool "Source checksum for all modules"
	help
	  Modules which contain a MODULE_VERSION get an extra "srcversion"
	  field inserted into their modinfo section, which contains a
    	  sum of the source files which made it.  This helps maintainers
	  see exactly which source was used to build a module (since
	  others sometimes change the module source without updating
	  the version).  With this option, such a "srcversion" field
	  will be created for all modules.  If unsure, say N.

R
Rusty Russell 已提交
1804 1805 1806
config MODULE_SIG
	bool "Module signature verification"
	depends on MODULES
1807
	select SYSTEM_DATA_VERIFICATION
R
Rusty Russell 已提交
1808 1809 1810
	help
	  Check modules for valid signatures upon load: the signature
	  is simply appended to the module. For more information see
1811
	  <file:Documentation/admin-guide/module-signing.rst>.
R
Rusty Russell 已提交
1812

1813 1814 1815 1816
	  Note that this option adds the OpenSSL development packages as a
	  kernel build dependency so that the signing tool can use its crypto
	  library.

D
David Howells 已提交
1817 1818 1819 1820 1821
	  !!!WARNING!!!  If you enable this option, you MUST make sure that the
	  module DOES NOT get stripped after being signed.  This includes the
	  debuginfo strip done by some packagers (such as rpmbuild) and
	  inclusion into an initramfs that wants the module size reduced.

R
Rusty Russell 已提交
1822 1823 1824 1825 1826 1827
config MODULE_SIG_FORCE
	bool "Require modules to be validly signed"
	depends on MODULE_SIG
	help
	  Reject unsigned modules or signed modules for which we don't have a
	  key.  Without this, such modules will simply taint the kernel.
D
David Howells 已提交
1828

1829 1830 1831 1832 1833 1834 1835 1836 1837 1838 1839
config MODULE_SIG_ALL
	bool "Automatically sign all modules"
	default y
	depends on MODULE_SIG
	help
	  Sign all modules during make modules_install. Without this option,
	  modules must be signed manually, using the scripts/sign-file tool.

comment "Do not forget to sign required modules with scripts/sign-file"
	depends on MODULE_SIG_FORCE && !MODULE_SIG_ALL

D
David Howells 已提交
1840 1841 1842 1843 1844 1845 1846 1847 1848 1849 1850 1851 1852 1853 1854 1855 1856 1857 1858 1859 1860 1861 1862 1863 1864 1865 1866 1867 1868 1869 1870 1871
choice
	prompt "Which hash algorithm should modules be signed with?"
	depends on MODULE_SIG
	help
	  This determines which sort of hashing algorithm will be used during
	  signature generation.  This algorithm _must_ be built into the kernel
	  directly so that signature verification can take place.  It is not
	  possible to load a signed module containing the algorithm to check
	  the signature on that module.

config MODULE_SIG_SHA1
	bool "Sign modules with SHA-1"
	select CRYPTO_SHA1

config MODULE_SIG_SHA224
	bool "Sign modules with SHA-224"
	select CRYPTO_SHA256

config MODULE_SIG_SHA256
	bool "Sign modules with SHA-256"
	select CRYPTO_SHA256

config MODULE_SIG_SHA384
	bool "Sign modules with SHA-384"
	select CRYPTO_SHA512

config MODULE_SIG_SHA512
	bool "Sign modules with SHA-512"
	select CRYPTO_SHA512

endchoice

1872 1873 1874 1875 1876 1877 1878 1879 1880
config MODULE_SIG_HASH
	string
	depends on MODULE_SIG
	default "sha1" if MODULE_SIG_SHA1
	default "sha224" if MODULE_SIG_SHA224
	default "sha256" if MODULE_SIG_SHA256
	default "sha384" if MODULE_SIG_SHA384
	default "sha512" if MODULE_SIG_SHA512

1881 1882 1883 1884 1885
config MODULE_COMPRESS
	bool "Compress modules on installation"
	depends on MODULES
	help

1886 1887
	  Compresses kernel modules when 'make modules_install' is run; gzip or
	  xz depending on "Compression algorithm" below.
1888

1889
	  module-init-tools MAY support gzip, and kmod MAY support gzip and xz.
1890

1891 1892
	  Out-of-tree kernel modules installed using Kbuild will also be
	  compressed upon installation.
1893

1894 1895
	  Note: for modules inside an initrd or initramfs, it's more efficient
	  to compress the whole initrd or initramfs instead.
1896

1897 1898 1899
	  Note: This is fully compatible with signed modules.

	  If in doubt, say N.
1900 1901 1902 1903 1904 1905 1906 1907 1908 1909 1910 1911 1912 1913 1914 1915 1916 1917 1918

choice
	prompt "Compression algorithm"
	depends on MODULE_COMPRESS
	default MODULE_COMPRESS_GZIP
	help
	  This determines which sort of compression will be used during
	  'make modules_install'.

	  GZIP (default) and XZ are supported.

config MODULE_COMPRESS_GZIP
	bool "GZIP"

config MODULE_COMPRESS_XZ
	bool "XZ"

endchoice

1919 1920 1921 1922 1923 1924 1925 1926 1927 1928 1929 1930 1931 1932
config TRIM_UNUSED_KSYMS
	bool "Trim unused exported kernel symbols"
	depends on MODULES && !UNUSED_SYMBOLS
	help
	  The kernel and some modules make many symbols available for
	  other modules to use via EXPORT_SYMBOL() and variants. Depending
	  on the set of modules being selected in your kernel configuration,
	  many of those exported symbols might never be used.

	  This option allows for unused exported symbols to be dropped from
	  the build. In turn, this provides the compiler more opportunities
	  (especially when using LTO) for optimizing the code and reducing
	  binary size.  This might have some security advantages as well.

1933
	  If unsure, or if you need to build out-of-tree modules, say N.
1934

1935 1936
endif # MODULES

1937 1938 1939 1940
config MODULES_TREE_LOOKUP
	def_bool y
	depends on PERF_EVENTS || TRACING

1941 1942 1943
config INIT_ALL_POSSIBLE
	bool
	help
1944 1945
	  Back when each arch used to define their own cpu_online_mask and
	  cpu_possible_mask, some of them chose to initialize cpu_possible_mask
1946 1947
	  with all 1s, and others with all 0s.  When they were centralised,
	  it was better to provide this option than to break all the archs
1948
	  and have several arch maintainers pursuing me down dark alleys.
1949

1950
source "block/Kconfig"
1951 1952 1953

config PREEMPT_NOTIFIERS
	bool
P
Paul E. McKenney 已提交
1954

1955 1956 1957 1958
config PADATA
	depends on SMP
	bool

1959 1960 1961 1962 1963 1964 1965 1966
config ASN1
	tristate
	help
	  Build a simple ASN.1 grammar compiler that produces a bytecode output
	  that can be interpreted by the ASN.1 stream decoder and used to
	  inform it as to what tags are to be expected in a stream and what
	  functions to call on what tags.

1967
source "kernel/Kconfig.locks"
1968 1969 1970

config ARCH_HAS_SYNC_CORE_BEFORE_USERMODE
	bool
1971 1972

# It may be useful for an architecture to override the definitions of the
1973 1974 1975 1976 1977 1978
# SYSCALL_DEFINE() and __SYSCALL_DEFINEx() macros in <linux/syscalls.h>
# and the COMPAT_ variants in <linux/compat.h>, in particular to use a
# different calling convention for syscalls. They can also override the
# macros for not-implemented syscalls in kernel/sys_ni.c and
# kernel/time/posix-stubs.c. All these overrides need to be available in
# <asm/syscall_wrapper.h>.
1979 1980
config ARCH_HAS_SYSCALL_WRAPPER
	def_bool n