fs-writeback.c

/*
 * fs/fs-writeback.c
 *
 * Copyright (C) 2002, Linus Torvalds.
 *
 * Contains all the functions related to writing back and waiting
 * upon dirty inodes against superblocks, and writing back dirty
 * pages against inodes.  ie: data writeback.  Writeout of the
 * inode itself is not handled here.
 *
 * 10Apr2002	Andrew Morton
 *		Split out of fs/inode.c
 *		Additions for address_space-based writeback
 */

#include <linux/kernel.h>
#include <linux/export.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/pagemap.h>
#include <linux/kthread.h>
#include <linux/writeback.h>
#include <linux/blkdev.h>
#include <linux/backing-dev.h>
#include <linux/tracepoint.h>
#include <linux/device.h>
#include "internal.h"

/*
 * 4MB minimal write chunk size
 */
#define MIN_WRITEBACK_PAGES	(4096UL >> (PAGE_CACHE_SHIFT - 10))

/*
 * Passed into wb_writeback(), essentially a subset of writeback_control
 */
struct wb_writeback_work {
	long nr_pages;
	struct super_block *sb;
	unsigned long *older_than_this;
	enum writeback_sync_modes sync_mode;
	unsigned int tagged_writepages:1;
	unsigned int for_kupdate:1;
	unsigned int range_cyclic:1;
	unsigned int for_background:1;
	unsigned int for_sync:1;	/* sync(2) WB_SYNC_ALL writeback */
	enum wb_reason reason;		/* why was writeback initiated? */

	struct list_head list;		/* pending work list */
	struct completion *done;	/* set if the caller waits */
};

/*
 * If an inode is constantly having its pages dirtied, but then the
 * updates stop dirtytime_expire_interval seconds in the past, it's
 * possible for the worst case time between when an inode has its
 * timestamps updated and when they finally get written out to be two
 * dirtytime_expire_intervals.  We set the default to 12 hours (in
 * seconds), which means most of the time inodes will have their
 * timestamps written to disk after 12 hours, but in the worst case a
 * few inodes might not their timestamps updated for 24 hours.
 */
unsigned int dirtytime_expire_interval = 12 * 60 * 60;

static inline struct inode *wb_inode(struct list_head *head)
{
	return list_entry(head, struct inode, i_wb_list);
}

/*
 * Include the creation of the trace points after defining the
 * wb_writeback_work structure and inline functions so that the definition
 * remains local to this file.
 */
#define CREATE_TRACE_POINTS
#include <trace/events/writeback.h>

EXPORT_TRACEPOINT_SYMBOL_GPL(wbc_writepage);

static bool wb_io_lists_populated(struct bdi_writeback *wb)
{
	if (wb_has_dirty_io(wb)) {
		return false;
	} else {
		set_bit(WB_has_dirty_io, &wb->state);
		WARN_ON_ONCE(!wb->avg_write_bandwidth);
		atomic_long_add(wb->avg_write_bandwidth,
				&wb->bdi->tot_write_bandwidth);
		return true;
	}
}

static void wb_io_lists_depopulated(struct bdi_writeback *wb)
{
	if (wb_has_dirty_io(wb) && list_empty(&wb->b_dirty) &&
	    list_empty(&wb->b_io) && list_empty(&wb->b_more_io)) {
		clear_bit(WB_has_dirty_io, &wb->state);
		WARN_ON_ONCE(atomic_long_sub_return(wb->avg_write_bandwidth,
					&wb->bdi->tot_write_bandwidth) < 0);
	}
}

/**
 * inode_wb_list_move_locked - move an inode onto a bdi_writeback IO list
 * @inode: inode to be moved
 * @wb: target bdi_writeback
 * @head: one of @wb->b_{dirty|io|more_io}
 *
 * Move @inode->i_wb_list to @list of @wb and set %WB_has_dirty_io.
 * Returns %true if @inode is the first occupant of the !dirty_time IO
 * lists; otherwise, %false.
 */
static bool inode_wb_list_move_locked(struct inode *inode,
				      struct bdi_writeback *wb,
				      struct list_head *head)
{
	assert_spin_locked(&wb->list_lock);

	list_move(&inode->i_wb_list, head);

	/* dirty_time doesn't count as dirty_io until expiration */
	if (head != &wb->b_dirty_time)
		return wb_io_lists_populated(wb);

	wb_io_lists_depopulated(wb);
	return false;
}

/**
 * inode_wb_list_del_locked - remove an inode from its bdi_writeback IO list
 * @inode: inode to be removed
 * @wb: bdi_writeback @inode is being removed from
 *
 * Remove @inode which may be on one of @wb->b_{dirty|io|more_io} lists and
 * clear %WB_has_dirty_io if all are empty afterwards.
 */
static void inode_wb_list_del_locked(struct inode *inode,
				     struct bdi_writeback *wb)
{
	assert_spin_locked(&wb->list_lock);

	list_del_init(&inode->i_wb_list);
	wb_io_lists_depopulated(wb);
}

static void wb_wakeup(struct bdi_writeback *wb)
{
	spin_lock_bh(&wb->work_lock);
	if (test_bit(WB_registered, &wb->state))
		mod_delayed_work(bdi_wq, &wb->dwork, 0);
	spin_unlock_bh(&wb->work_lock);
}

static void wb_queue_work(struct bdi_writeback *wb,
			  struct wb_writeback_work *work)
{
	trace_writeback_queue(wb->bdi, work);

	spin_lock_bh(&wb->work_lock);
	if (!test_bit(WB_registered, &wb->state)) {
		if (work->done)
			complete(work->done);
		goto out_unlock;
	}
	list_add_tail(&work->list, &wb->work_list);
	mod_delayed_work(bdi_wq, &wb->dwork, 0);
out_unlock:
	spin_unlock_bh(&wb->work_lock);
}

#ifdef CONFIG_CGROUP_WRITEBACK

/**
 * inode_congested - test whether an inode is congested
 * @inode: inode to test for congestion
 * @cong_bits: mask of WB_[a]sync_congested bits to test
 *
 * Tests whether @inode is congested.  @cong_bits is the mask of congestion
 * bits to test and the return value is the mask of set bits.
 *
 * If cgroup writeback is enabled for @inode, the congestion state is
 * determined by whether the cgwb (cgroup bdi_writeback) for the blkcg
 * associated with @inode is congested; otherwise, the root wb's congestion
 * state is used.
 */
int inode_congested(struct inode *inode, int cong_bits)
{
	if (inode) {
		struct bdi_writeback *wb = inode_to_wb(inode);
		if (wb)
			return wb_congested(wb, cong_bits);
	}

	return wb_congested(&inode_to_bdi(inode)->wb, cong_bits);
}
EXPORT_SYMBOL_GPL(inode_congested);

#endif	/* CONFIG_CGROUP_WRITEBACK */

void wb_start_writeback(struct bdi_writeback *wb, long nr_pages,
			bool range_cyclic, enum wb_reason reason)
{
	struct wb_writeback_work *work;

	if (!wb_has_dirty_io(wb))
		return;

	/*
	 * This is WB_SYNC_NONE writeback, so if allocation fails just
	 * wakeup the thread for old dirty data writeback
	 */
	work = kzalloc(sizeof(*work), GFP_ATOMIC);
	if (!work) {
		trace_writeback_nowork(wb->bdi);
		wb_wakeup(wb);
		return;
	}

	work->sync_mode	= WB_SYNC_NONE;
	work->nr_pages	= nr_pages;
	work->range_cyclic = range_cyclic;
	work->reason	= reason;

	wb_queue_work(wb, work);
}

/**
 * wb_start_background_writeback - start background writeback
 * @wb: bdi_writback to write from
 *
 * Description:
 *   This makes sure WB_SYNC_NONE background writeback happens. When
 *   this function returns, it is only guaranteed that for given wb
 *   some IO is happening if we are over background dirty threshold.
 *   Caller need not hold sb s_umount semaphore.
 */
void wb_start_background_writeback(struct bdi_writeback *wb)
{
	/*
	 * We just wake up the flusher thread. It will perform background
	 * writeback as soon as there is no other work to do.
	 */
	trace_writeback_wake_background(wb->bdi);
	wb_wakeup(wb);
}

/*
 * Remove the inode from the writeback list it is on.
 */
void inode_wb_list_del(struct inode *inode)
{
	struct bdi_writeback *wb = inode_to_wb(inode);

	spin_lock(&wb->list_lock);
	inode_wb_list_del_locked(inode, wb);
	spin_unlock(&wb->list_lock);
}

/*
 * Redirty an inode: set its when-it-was dirtied timestamp and move it to the
 * furthest end of its superblock's dirty-inode list.
 *
 * Before stamping the inode's ->dirtied_when, we check to see whether it is
 * already the most-recently-dirtied inode on the b_dirty list.  If that is
 * the case then the inode must have been redirtied while it was being written
 * out and we don't reset its dirtied_when.
 */
static void redirty_tail(struct inode *inode, struct bdi_writeback *wb)
{
	if (!list_empty(&wb->b_dirty)) {
		struct inode *tail;

		tail = wb_inode(wb->b_dirty.next);
		if (time_before(inode->dirtied_when, tail->dirtied_when))
			inode->dirtied_when = jiffies;
	}
	inode_wb_list_move_locked(inode, wb, &wb->b_dirty);
}

/*
 * requeue inode for re-scanning after bdi->b_io list is exhausted.
 */
static void requeue_io(struct inode *inode, struct bdi_writeback *wb)
{
	inode_wb_list_move_locked(inode, wb, &wb->b_more_io);
}

static void inode_sync_complete(struct inode *inode)
{
	inode->i_state &= ~I_SYNC;
	/* If inode is clean an unused, put it into LRU now... */
	inode_add_lru(inode);
	/* Waiters must see I_SYNC cleared before being woken up */
	smp_mb();
	wake_up_bit(&inode->i_state, __I_SYNC);
}

static bool inode_dirtied_after(struct inode *inode, unsigned long t)
{
	bool ret = time_after(inode->dirtied_when, t);
#ifndef CONFIG_64BIT
	/*
	 * For inodes being constantly redirtied, dirtied_when can get stuck.
	 * It _appears_ to be in the future, but is actually in distant past.
	 * This test is necessary to prevent such wrapped-around relative times
	 * from permanently stopping the whole bdi writeback.
	 */
	ret = ret && time_before_eq(inode->dirtied_when, jiffies);
#endif
	return ret;
}

#define EXPIRE_DIRTY_ATIME 0x0001

/*
 * Move expired (dirtied before work->older_than_this) dirty inodes from
 * @delaying_queue to @dispatch_queue.
 */
static int move_expired_inodes(struct list_head *delaying_queue,
			       struct list_head *dispatch_queue,
			       int flags,
			       struct wb_writeback_work *work)
{
	unsigned long *older_than_this = NULL;
	unsigned long expire_time;
	LIST_HEAD(tmp);
	struct list_head *pos, *node;
	struct super_block *sb = NULL;
	struct inode *inode;
	int do_sb_sort = 0;
	int moved = 0;

	if ((flags & EXPIRE_DIRTY_ATIME) == 0)
		older_than_this = work->older_than_this;
	else if (!work->for_sync) {
		expire_time = jiffies - (dirtytime_expire_interval * HZ);
		older_than_this = &expire_time;
	}
	while (!list_empty(delaying_queue)) {
		inode = wb_inode(delaying_queue->prev);
		if (older_than_this &&
		    inode_dirtied_after(inode, *older_than_this))
			break;
		list_move(&inode->i_wb_list, &tmp);
		moved++;
		if (flags & EXPIRE_DIRTY_ATIME)
			set_bit(__I_DIRTY_TIME_EXPIRED, &inode->i_state);
		if (sb_is_blkdev_sb(inode->i_sb))
			continue;
		if (sb && sb != inode->i_sb)
			do_sb_sort = 1;
		sb = inode->i_sb;
	}

	/* just one sb in list, splice to dispatch_queue and we're done */
	if (!do_sb_sort) {
		list_splice(&tmp, dispatch_queue);
		goto out;
	}

	/* Move inodes from one superblock together */
	while (!list_empty(&tmp)) {
		sb = wb_inode(tmp.prev)->i_sb;
		list_for_each_prev_safe(pos, node, &tmp) {
			inode = wb_inode(pos);
			if (inode->i_sb == sb)
				list_move(&inode->i_wb_list, dispatch_queue);
		}
	}
out:
	return moved;
}

/*
 * Queue all expired dirty inodes for io, eldest first.
 * Before
 *         newly dirtied     b_dirty    b_io    b_more_io
 *         =============>    gf         edc     BA
 * After
 *         newly dirtied     b_dirty    b_io    b_more_io
 *         =============>    g          fBAedc
 *                                           |
 *                                           +--> dequeue for IO
 */
static void queue_io(struct bdi_writeback *wb, struct wb_writeback_work *work)
{
	int moved;

	assert_spin_locked(&wb->list_lock);
	list_splice_init(&wb->b_more_io, &wb->b_io);
	moved = move_expired_inodes(&wb->b_dirty, &wb->b_io, 0, work);
	moved += move_expired_inodes(&wb->b_dirty_time, &wb->b_io,
				     EXPIRE_DIRTY_ATIME, work);
	if (moved)
		wb_io_lists_populated(wb);
	trace_writeback_queue_io(wb, work, moved);
}

static int write_inode(struct inode *inode, struct writeback_control *wbc)
{
	int ret;

	if (inode->i_sb->s_op->write_inode && !is_bad_inode(inode)) {
		trace_writeback_write_inode_start(inode, wbc);
		ret = inode->i_sb->s_op->write_inode(inode, wbc);
		trace_writeback_write_inode(inode, wbc);
		return ret;
	}
	return 0;
}

/*
 * Wait for writeback on an inode to complete. Called with i_lock held.
 * Caller must make sure inode cannot go away when we drop i_lock.
 */
static void __inode_wait_for_writeback(struct inode *inode)
	__releases(inode->i_lock)
	__acquires(inode->i_lock)
{
	DEFINE_WAIT_BIT(wq, &inode->i_state, __I_SYNC);
	wait_queue_head_t *wqh;

	wqh = bit_waitqueue(&inode->i_state, __I_SYNC);
	while (inode->i_state & I_SYNC) {
		spin_unlock(&inode->i_lock);
		__wait_on_bit(wqh, &wq, bit_wait,
			      TASK_UNINTERRUPTIBLE);
		spin_lock(&inode->i_lock);
	}
}

/*
 * Wait for writeback on an inode to complete. Caller must have inode pinned.
 */
void inode_wait_for_writeback(struct inode *inode)
{
	spin_lock(&inode->i_lock);
	__inode_wait_for_writeback(inode);
	spin_unlock(&inode->i_lock);
}

/*
 * Sleep until I_SYNC is cleared. This function must be called with i_lock
 * held and drops it. It is aimed for callers not holding any inode reference
 * so once i_lock is dropped, inode can go away.
 */
static void inode_sleep_on_writeback(struct inode *inode)
	__releases(inode->i_lock)
{
	DEFINE_WAIT(wait);
	wait_queue_head_t *wqh = bit_waitqueue(&inode->i_state, __I_SYNC);
	int sleep;

	prepare_to_wait(wqh, &wait, TASK_UNINTERRUPTIBLE);
	sleep = inode->i_state & I_SYNC;
	spin_unlock(&inode->i_lock);
	if (sleep)
		schedule();
	finish_wait(wqh, &wait);
}

/*
 * Find proper writeback list for the inode depending on its current state and
 * possibly also change of its state while we were doing writeback.  Here we
 * handle things such as livelock prevention or fairness of writeback among
 * inodes. This function can be called only by flusher thread - noone else
 * processes all inodes in writeback lists and requeueing inodes behind flusher
 * thread's back can have unexpected consequences.
 */
static void requeue_inode(struct inode *inode, struct bdi_writeback *wb,
			  struct writeback_control *wbc)
{
	if (inode->i_state & I_FREEING)
		return;

	/*
	 * Sync livelock prevention. Each inode is tagged and synced in one
	 * shot. If still dirty, it will be redirty_tail()'ed below.  Update
	 * the dirty time to prevent enqueue and sync it again.
	 */
	if ((inode->i_state & I_DIRTY) &&
	    (wbc->sync_mode == WB_SYNC_ALL || wbc->tagged_writepages))
		inode->dirtied_when = jiffies;

	if (wbc->pages_skipped) {
		/*
		 * writeback is not making progress due to locked
		 * buffers. Skip this inode for now.
		 */
		redirty_tail(inode, wb);
		return;
	}

	if (mapping_tagged(inode->i_mapping, PAGECACHE_TAG_DIRTY)) {
		/*
		 * We didn't write back all the pages.  nfs_writepages()
		 * sometimes bales out without doing anything.
		 */
		if (wbc->nr_to_write <= 0) {
			/* Slice used up. Queue for next turn. */
			requeue_io(inode, wb);
		} else {
			/*
			 * Writeback blocked by something other than
			 * congestion. Delay the inode for some time to
			 * avoid spinning on the CPU (100% iowait)
			 * retrying writeback of the dirty page/inode
			 * that cannot be performed immediately.
			 */
			redirty_tail(inode, wb);
		}
	} else if (inode->i_state & I_DIRTY) {
		/*
		 * Filesystems can dirty the inode during writeback operations,
		 * such as delayed allocation during submission or metadata
		 * updates after data IO completion.
		 */
		redirty_tail(inode, wb);
	} else if (inode->i_state & I_DIRTY_TIME) {
		inode->dirtied_when = jiffies;
		inode_wb_list_move_locked(inode, wb, &wb->b_dirty_time);
	} else {
		/* The inode is clean. Remove from writeback lists. */
		inode_wb_list_del_locked(inode, wb);
	}
}

/*
 * Write out an inode and its dirty pages. Do not update the writeback list
 * linkage. That is left to the caller. The caller is also responsible for
 * setting I_SYNC flag and calling inode_sync_complete() to clear it.
 */
static int
__writeback_single_inode(struct inode *inode, struct writeback_control *wbc)
{
	struct address_space *mapping = inode->i_mapping;
	long nr_to_write = wbc->nr_to_write;
	unsigned dirty;
	int ret;

	WARN_ON(!(inode->i_state & I_SYNC));

	trace_writeback_single_inode_start(inode, wbc, nr_to_write);

	ret = do_writepages(mapping, wbc);

	/*
	 * Make sure to wait on the data before writing out the metadata.
	 * This is important for filesystems that modify metadata on data
	 * I/O completion. We don't do it for sync(2) writeback because it has a
	 * separate, external IO completion path and ->sync_fs for guaranteeing
	 * inode metadata is written back correctly.
	 */
	if (wbc->sync_mode == WB_SYNC_ALL && !wbc->for_sync) {
		int err = filemap_fdatawait(mapping);
		if (ret == 0)
			ret = err;
	}

	/*
	 * Some filesystems may redirty the inode during the writeback
	 * due to delalloc, clear dirty metadata flags right before
	 * write_inode()
	 */
	spin_lock(&inode->i_lock);

	dirty = inode->i_state & I_DIRTY;
	if (inode->i_state & I_DIRTY_TIME) {
		if ((dirty & (I_DIRTY_SYNC | I_DIRTY_DATASYNC)) ||
		    unlikely(inode->i_state & I_DIRTY_TIME_EXPIRED) ||
		    unlikely(time_after(jiffies,
					(inode->dirtied_time_when +
					 dirtytime_expire_interval * HZ)))) {
			dirty |= I_DIRTY_TIME | I_DIRTY_TIME_EXPIRED;
			trace_writeback_lazytime(inode);
		}
	} else
		inode->i_state &= ~I_DIRTY_TIME_EXPIRED;
	inode->i_state &= ~dirty;

	/*
	 * Paired with smp_mb() in __mark_inode_dirty().  This allows
	 * __mark_inode_dirty() to test i_state without grabbing i_lock -
	 * either they see the I_DIRTY bits cleared or we see the dirtied
	 * inode.
	 *
	 * I_DIRTY_PAGES is always cleared together above even if @mapping
	 * still has dirty pages.  The flag is reinstated after smp_mb() if
	 * necessary.  This guarantees that either __mark_inode_dirty()
	 * sees clear I_DIRTY_PAGES or we see PAGECACHE_TAG_DIRTY.
	 */
	smp_mb();

	if (mapping_tagged(mapping, PAGECACHE_TAG_DIRTY))
		inode->i_state |= I_DIRTY_PAGES;

	spin_unlock(&inode->i_lock);

	if (dirty & I_DIRTY_TIME)
		mark_inode_dirty_sync(inode);
	/* Don't write the inode if only I_DIRTY_PAGES was set */
	if (dirty & ~I_DIRTY_PAGES) {
		int err = write_inode(inode, wbc);
		if (ret == 0)
			ret = err;
	}
	trace_writeback_single_inode(inode, wbc, nr_to_write);
	return ret;
}

/*
 * Write out an inode's dirty pages. Either the caller has an active reference
 * on the inode or the inode has I_WILL_FREE set.
 *
 * This function is designed to be called for writing back one inode which
 * we go e.g. from filesystem. Flusher thread uses __writeback_single_inode()
 * and does more profound writeback list handling in writeback_sb_inodes().
 */
static int
writeback_single_inode(struct inode *inode, struct bdi_writeback *wb,
		       struct writeback_control *wbc)
{
	int ret = 0;

	spin_lock(&inode->i_lock);
	if (!atomic_read(&inode->i_count))
		WARN_ON(!(inode->i_state & (I_WILL_FREE|I_FREEING)));
	else
		WARN_ON(inode->i_state & I_WILL_FREE);

	if (inode->i_state & I_SYNC) {
		if (wbc->sync_mode != WB_SYNC_ALL)
			goto out;
		/*
		 * It's a data-integrity sync. We must wait. Since callers hold
		 * inode reference or inode has I_WILL_FREE set, it cannot go
		 * away under us.
		 */
		__inode_wait_for_writeback(inode);
	}
	WARN_ON(inode->i_state & I_SYNC);
	/*
	 * Skip inode if it is clean and we have no outstanding writeback in
	 * WB_SYNC_ALL mode. We don't want to mess with writeback lists in this
	 * function since flusher thread may be doing for example sync in
	 * parallel and if we move the inode, it could get skipped. So here we
	 * make sure inode is on some writeback list and leave it there unless
	 * we have completely cleaned the inode.
	 */
	if (!(inode->i_state & I_DIRTY_ALL) &&
	    (wbc->sync_mode != WB_SYNC_ALL ||
	     !mapping_tagged(inode->i_mapping, PAGECACHE_TAG_WRITEBACK)))
		goto out;
	inode->i_state |= I_SYNC;
	spin_unlock(&inode->i_lock);

	ret = __writeback_single_inode(inode, wbc);

	spin_lock(&wb->list_lock);
	spin_lock(&inode->i_lock);
	/*
	 * If inode is clean, remove it from writeback lists. Otherwise don't
	 * touch it. See comment above for explanation.
	 */
	if (!(inode->i_state & I_DIRTY_ALL))
		inode_wb_list_del_locked(inode, wb);
	spin_unlock(&wb->list_lock);
	inode_sync_complete(inode);
out:
	spin_unlock(&inode->i_lock);
	return ret;
}

static long writeback_chunk_size(struct bdi_writeback *wb,
				 struct wb_writeback_work *work)
{
	long pages;

	/*
	 * WB_SYNC_ALL mode does livelock avoidance by syncing dirty
	 * inodes/pages in one big loop. Setting wbc.nr_to_write=LONG_MAX
	 * here avoids calling into writeback_inodes_wb() more than once.
	 *
	 * The intended call sequence for WB_SYNC_ALL writeback is:
	 *
	 *      wb_writeback()
	 *          writeback_sb_inodes()       <== called only once
	 *              write_cache_pages()     <== called once for each inode
	 *                   (quickly) tag currently dirty pages
	 *                   (maybe slowly) sync all tagged pages
	 */
	if (work->sync_mode == WB_SYNC_ALL || work->tagged_writepages)
		pages = LONG_MAX;
	else {
		pages = min(wb->avg_write_bandwidth / 2,
			    global_dirty_limit / DIRTY_SCOPE);
		pages = min(pages, work->nr_pages);
		pages = round_down(pages + MIN_WRITEBACK_PAGES,
				   MIN_WRITEBACK_PAGES);
	}

	return pages;
}

/*
 * Write a portion of b_io inodes which belong to @sb.
 *
 * Return the number of pages and/or inodes written.
 */
static long writeback_sb_inodes(struct super_block *sb,
				struct bdi_writeback *wb,
				struct wb_writeback_work *work)
{
	struct writeback_control wbc = {
		.sync_mode		= work->sync_mode,
		.tagged_writepages	= work->tagged_writepages,
		.for_kupdate		= work->for_kupdate,
		.for_background		= work->for_background,
		.for_sync		= work->for_sync,
		.range_cyclic		= work->range_cyclic,
		.range_start		= 0,
		.range_end		= LLONG_MAX,
	};
	unsigned long start_time = jiffies;
	long write_chunk;
	long wrote = 0;  /* count both pages and inodes */

	while (!list_empty(&wb->b_io)) {
		struct inode *inode = wb_inode(wb->b_io.prev);

		if (inode->i_sb != sb) {
			if (work->sb) {
				/*
				 * We only want to write back data for this
				 * superblock, move all inodes not belonging
				 * to it back onto the dirty list.
				 */
				redirty_tail(inode, wb);
				continue;
			}

			/*
			 * The inode belongs to a different superblock.
			 * Bounce back to the caller to unpin this and
			 * pin the next superblock.
			 */
			break;
		}

		/*
		 * Don't bother with new inodes or inodes being freed, first
		 * kind does not need periodic writeout yet, and for the latter
		 * kind writeout is handled by the freer.
		 */
		spin_lock(&inode->i_lock);
		if (inode->i_state & (I_NEW | I_FREEING | I_WILL_FREE)) {
			spin_unlock(&inode->i_lock);
			redirty_tail(inode, wb);
			continue;
		}
		if ((inode->i_state & I_SYNC) && wbc.sync_mode != WB_SYNC_ALL) {
			/*
			 * If this inode is locked for writeback and we are not
			 * doing writeback-for-data-integrity, move it to
			 * b_more_io so that writeback can proceed with the
			 * other inodes on s_io.
			 *
			 * We'll have another go at writing back this inode
			 * when we completed a full scan of b_io.
			 */
			spin_unlock(&inode->i_lock);
			requeue_io(inode, wb);
			trace_writeback_sb_inodes_requeue(inode);
			continue;
		}
		spin_unlock(&wb->list_lock);

		/*
		 * We already requeued the inode if it had I_SYNC set and we
		 * are doing WB_SYNC_NONE writeback. So this catches only the
		 * WB_SYNC_ALL case.
		 */
		if (inode->i_state & I_SYNC) {
			/* Wait for I_SYNC. This function drops i_lock... */
			inode_sleep_on_writeback(inode);
			/* Inode may be gone, start again */
			spin_lock(&wb->list_lock);
			continue;
		}
		inode->i_state |= I_SYNC;
		spin_unlock(&inode->i_lock);

		write_chunk = writeback_chunk_size(wb, work);
		wbc.nr_to_write = write_chunk;
		wbc.pages_skipped = 0;

		/*
		 * We use I_SYNC to pin the inode in memory. While it is set
		 * evict_inode() will wait so the inode cannot be freed.
		 */
		__writeback_single_inode(inode, &wbc);

		work->nr_pages -= write_chunk - wbc.nr_to_write;
		wrote += write_chunk - wbc.nr_to_write;
		spin_lock(&wb->list_lock);
		spin_lock(&inode->i_lock);
		if (!(inode->i_state & I_DIRTY_ALL))
			wrote++;
		requeue_inode(inode, wb, &wbc);
		inode_sync_complete(inode);
		spin_unlock(&inode->i_lock);
		cond_resched_lock(&wb->list_lock);
		/*
		 * bail out to wb_writeback() often enough to check
		 * background threshold and other termination conditions.
		 */
		if (wrote) {
			if (time_is_before_jiffies(start_time + HZ / 10UL))
				break;
			if (work->nr_pages <= 0)
				break;
		}
	}
	return wrote;
}

static long __writeback_inodes_wb(struct bdi_writeback *wb,
				  struct wb_writeback_work *work)
{
	unsigned long start_time = jiffies;
	long wrote = 0;

	while (!list_empty(&wb->b_io)) {
		struct inode *inode = wb_inode(wb->b_io.prev);
		struct super_block *sb = inode->i_sb;

		if (!trylock_super(sb)) {
			/*
			 * trylock_super() may fail consistently due to
			 * s_umount being grabbed by someone else. Don't use
			 * requeue_io() to avoid busy retrying the inode/sb.
			 */
			redirty_tail(inode, wb);
			continue;
		}
		wrote += writeback_sb_inodes(sb, wb, work);
		up_read(&sb->s_umount);

		/* refer to the same tests at the end of writeback_sb_inodes */
		if (wrote) {
			if (time_is_before_jiffies(start_time + HZ / 10UL))
				break;
			if (work->nr_pages <= 0)
				break;
		}
	}
	/* Leave any unwritten inodes on b_io */
	return wrote;
}

static long writeback_inodes_wb(struct bdi_writeback *wb, long nr_pages,
				enum wb_reason reason)
{
	struct wb_writeback_work work = {
		.nr_pages	= nr_pages,
		.sync_mode	= WB_SYNC_NONE,
		.range_cyclic	= 1,
		.reason		= reason,
	};

	spin_lock(&wb->list_lock);
	if (list_empty(&wb->b_io))
		queue_io(wb, &work);
	__writeback_inodes_wb(wb, &work);
	spin_unlock(&wb->list_lock);

	return nr_pages - work.nr_pages;
}

static bool over_bground_thresh(struct bdi_writeback *wb)
{
	unsigned long background_thresh, dirty_thresh;

	global_dirty_limits(&background_thresh, &dirty_thresh);

	if (global_page_state(NR_FILE_DIRTY) +
	    global_page_state(NR_UNSTABLE_NFS) > background_thresh)
		return true;

	if (wb_stat(wb, WB_RECLAIMABLE) > wb_dirty_limit(wb, background_thresh))
		return true;

	return false;
}

/*
 * Called under wb->list_lock. If there are multiple wb per bdi,
 * only the flusher working on the first wb should do it.
 */
static void wb_update_bandwidth(struct bdi_writeback *wb,
				unsigned long start_time)
{
	__wb_update_bandwidth(wb, 0, 0, 0, 0, 0, start_time);
}

/*
 * Explicit flushing or periodic writeback of "old" data.
 *
 * Define "old": the first time one of an inode's pages is dirtied, we mark the
 * dirtying-time in the inode's address_space.  So this periodic writeback code
 * just walks the superblock inode list, writing back any inodes which are
 * older than a specific point in time.
 *
 * Try to run once per dirty_writeback_interval.  But if a writeback event
 * takes longer than a dirty_writeback_interval interval, then leave a
 * one-second gap.
 *
 * older_than_this takes precedence over nr_to_write.  So we'll only write back
 * all dirty pages if they are all attached to "old" mappings.
 */
static long wb_writeback(struct bdi_writeback *wb,
			 struct wb_writeback_work *work)
{
	unsigned long wb_start = jiffies;
	long nr_pages = work->nr_pages;
	unsigned long oldest_jif;
	struct inode *inode;
	long progress;

	oldest_jif = jiffies;
	work->older_than_this = &oldest_jif;

	spin_lock(&wb->list_lock);
	for (;;) {
		/*
		 * Stop writeback when nr_pages has been consumed
		 */
		if (work->nr_pages <= 0)
			break;

		/*
		 * Background writeout and kupdate-style writeback may
		 * run forever. Stop them if there is other work to do
		 * so that e.g. sync can proceed. They'll be restarted
		 * after the other works are all done.
		 */
		if ((work->for_background || work->for_kupdate) &&
		    !list_empty(&wb->work_list))
			break;

		/*
		 * For background writeout, stop when we are below the
		 * background dirty threshold
		 */
		if (work->for_background && !over_bground_thresh(wb))
			break;

		/*
		 * Kupdate and background works are special and we want to
		 * include all inodes that need writing. Livelock avoidance is
		 * handled by these works yielding to any other work so we are
		 * safe.
		 */
		if (work->for_kupdate) {
			oldest_jif = jiffies -
				msecs_to_jiffies(dirty_expire_interval * 10);
		} else if (work->for_background)
			oldest_jif = jiffies;

		trace_writeback_start(wb->bdi, work);
		if (list_empty(&wb->b_io))
			queue_io(wb, work);
		if (work->sb)
			progress = writeback_sb_inodes(work->sb, wb, work);
		else
			progress = __writeback_inodes_wb(wb, work);
		trace_writeback_written(wb->bdi, work);

		wb_update_bandwidth(wb, wb_start);

		/*
		 * Did we write something? Try for more
		 *
		 * Dirty inodes are moved to b_io for writeback in batches.
		 * The completion of the current batch does not necessarily
		 * mean the overall work is done. So we keep looping as long
		 * as made some progress on cleaning pages or inodes.
		 */
		if (progress)
			continue;
		/*
		 * No more inodes for IO, bail
		 */
		if (list_empty(&wb->b_more_io))
			break;
		/*
		 * Nothing written. Wait for some inode to
		 * become available for writeback. Otherwise
		 * we'll just busyloop.
		 */
		if (!list_empty(&wb->b_more_io))  {
			trace_writeback_wait(wb->bdi, work);
			inode = wb_inode(wb->b_more_io.prev);
			spin_lock(&inode->i_lock);
			spin_unlock(&wb->list_lock);
			/* This function drops i_lock... */
			inode_sleep_on_writeback(inode);
			spin_lock(&wb->list_lock);
		}
	}
	spin_unlock(&wb->list_lock);

	return nr_pages - work->nr_pages;
}

/*
 * Return the next wb_writeback_work struct that hasn't been processed yet.
 */
static struct wb_writeback_work *get_next_work_item(struct bdi_writeback *wb)
{
	struct wb_writeback_work *work = NULL;

	spin_lock_bh(&wb->work_lock);
	if (!list_empty(&wb->work_list)) {
		work = list_entry(wb->work_list.next,
				  struct wb_writeback_work, list);
		list_del_init(&work->list);
	}
	spin_unlock_bh(&wb->work_lock);
	return work;
}

/*
 * Add in the number of potentially dirty inodes, because each inode
 * write can dirty pagecache in the underlying blockdev.
 */
static unsigned long get_nr_dirty_pages(void)
{
	return global_page_state(NR_FILE_DIRTY) +
		global_page_state(NR_UNSTABLE_NFS) +
		get_nr_dirty_inodes();
}

static long wb_check_background_flush(struct bdi_writeback *wb)
{
	if (over_bground_thresh(wb)) {

		struct wb_writeback_work work = {
			.nr_pages	= LONG_MAX,
			.sync_mode	= WB_SYNC_NONE,
			.for_background	= 1,
			.range_cyclic	= 1,
			.reason		= WB_REASON_BACKGROUND,
		};

		return wb_writeback(wb, &work);
	}

	return 0;
}

static long wb_check_old_data_flush(struct bdi_writeback *wb)
{
	unsigned long expired;
	long nr_pages;

	/*
	 * When set to zero, disable periodic writeback
	 */
	if (!dirty_writeback_interval)
		return 0;

	expired = wb->last_old_flush +
			msecs_to_jiffies(dirty_writeback_interval * 10);
	if (time_before(jiffies, expired))
		return 0;

	wb->last_old_flush = jiffies;
	nr_pages = get_nr_dirty_pages();

	if (nr_pages) {
		struct wb_writeback_work work = {
			.nr_pages	= nr_pages,
			.sync_mode	= WB_SYNC_NONE,
			.for_kupdate	= 1,
			.range_cyclic	= 1,
			.reason		= WB_REASON_PERIODIC,
		};

		return wb_writeback(wb, &work);
	}

	return 0;
}

/*
 * Retrieve work items and do the writeback they describe
 */
static long wb_do_writeback(struct bdi_writeback *wb)
{
	struct wb_writeback_work *work;
	long wrote = 0;

	set_bit(WB_writeback_running, &wb->state);
	while ((work = get_next_work_item(wb)) != NULL) {

		trace_writeback_exec(wb->bdi, work);

		wrote += wb_writeback(wb, work);

		/*
		 * Notify the caller of completion if this is a synchronous
		 * work item, otherwise just free it.
		 */
		if (work->done)
			complete(work->done);
		else
			kfree(work);
	}

	/*
	 * Check for periodic writeback, kupdated() style
	 */
	wrote += wb_check_old_data_flush(wb);
	wrote += wb_check_background_flush(wb);
	clear_bit(WB_writeback_running, &wb->state);

	return wrote;
}

/*
 * Handle writeback of dirty data for the device backed by this bdi. Also
 * reschedules periodically and does kupdated style flushing.
 */
void wb_workfn(struct work_struct *work)
{
	struct bdi_writeback *wb = container_of(to_delayed_work(work),
						struct bdi_writeback, dwork);
	long pages_written;

	set_worker_desc("flush-%s", dev_name(wb->bdi->dev));
	current->flags |= PF_SWAPWRITE;

	if (likely(!current_is_workqueue_rescuer() ||
		   !test_bit(WB_registered, &wb->state))) {
		/*
		 * The normal path.  Keep writing back @wb until its
		 * work_list is empty.  Note that this path is also taken
		 * if @wb is shutting down even when we're running off the
		 * rescuer as work_list needs to be drained.
		 */
		do {
			pages_written = wb_do_writeback(wb);
			trace_writeback_pages_written(pages_written);
		} while (!list_empty(&wb->work_list));
	} else {
		/*
		 * bdi_wq can't get enough workers and we're running off
		 * the emergency worker.  Don't hog it.  Hopefully, 1024 is
		 * enough for efficient IO.
		 */
		pages_written = writeback_inodes_wb(wb, 1024,
						    WB_REASON_FORKER_THREAD);
		trace_writeback_pages_written(pages_written);
	}

	if (!list_empty(&wb->work_list))
		mod_delayed_work(bdi_wq, &wb->dwork, 0);
	else if (wb_has_dirty_io(wb) && dirty_writeback_interval)
		wb_wakeup_delayed(wb);

	current->flags &= ~PF_SWAPWRITE;
}

/*
 * Start writeback of `nr_pages' pages.  If `nr_pages' is zero, write back
 * the whole world.
 */
void wakeup_flusher_threads(long nr_pages, enum wb_reason reason)
{
	struct backing_dev_info *bdi;

	if (!nr_pages)
		nr_pages = get_nr_dirty_pages();

	rcu_read_lock();
	list_for_each_entry_rcu(bdi, &bdi_list, bdi_list)
		wb_start_writeback(&bdi->wb, nr_pages, false, reason);
	rcu_read_unlock();
}

/*
 * Wake up bdi's periodically to make sure dirtytime inodes gets
 * written back periodically.  We deliberately do *not* check the
 * b_dirtytime list in wb_has_dirty_io(), since this would cause the
 * kernel to be constantly waking up once there are any dirtytime
 * inodes on the system.  So instead we define a separate delayed work
 * function which gets called much more rarely.  (By default, only
 * once every 12 hours.)
 *
 * If there is any other write activity going on in the file system,
 * this function won't be necessary.  But if the only thing that has
 * happened on the file system is a dirtytime inode caused by an atime
 * update, we need this infrastructure below to make sure that inode
 * eventually gets pushed out to disk.
 */
static void wakeup_dirtytime_writeback(struct work_struct *w);
static DECLARE_DELAYED_WORK(dirtytime_work, wakeup_dirtytime_writeback);

static void wakeup_dirtytime_writeback(struct work_struct *w)
{
	struct backing_dev_info *bdi;

	rcu_read_lock();
	list_for_each_entry_rcu(bdi, &bdi_list, bdi_list) {
		if (list_empty(&bdi->wb.b_dirty_time))
			continue;
		wb_wakeup(&bdi->wb);
	}
	rcu_read_unlock();
	schedule_delayed_work(&dirtytime_work, dirtytime_expire_interval * HZ);
}

static int __init start_dirtytime_writeback(void)
{
	schedule_delayed_work(&dirtytime_work, dirtytime_expire_interval * HZ);
	return 0;
}
__initcall(start_dirtytime_writeback);

int dirtytime_interval_handler(struct ctl_table *table, int write,
			       void __user *buffer, size_t *lenp, loff_t *ppos)
{
	int ret;

	ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
	if (ret == 0 && write)
		mod_delayed_work(system_wq, &dirtytime_work, 0);
	return ret;
}

static noinline void block_dump___mark_inode_dirty(struct inode *inode)
{
	if (inode->i_ino || strcmp(inode->i_sb->s_id, "bdev")) {
		struct dentry *dentry;
		const char *name = "?";

		dentry = d_find_alias(inode);
		if (dentry) {
			spin_lock(&dentry->d_lock);
			name = (const char *) dentry->d_name.name;
		}
		printk(KERN_DEBUG
		       "%s(%d): dirtied inode %lu (%s) on %s\n",
		       current->comm, task_pid_nr(current), inode->i_ino,
		       name, inode->i_sb->s_id);
		if (dentry) {
			spin_unlock(&dentry->d_lock);
			dput(dentry);
		}
	}
}

/**
 *	__mark_inode_dirty -	internal function
 *	@inode: inode to mark
 *	@flags: what kind of dirty (i.e. I_DIRTY_SYNC)
 *	Mark an inode as dirty. Callers should use mark_inode_dirty or
 *  	mark_inode_dirty_sync.
 *
 * Put the inode on the super block's dirty list.
 *
 * CAREFUL! We mark it dirty unconditionally, but move it onto the
 * dirty list only if it is hashed or if it refers to a blockdev.
 * If it was not hashed, it will never be added to the dirty list
 * even if it is later hashed, as it will have been marked dirty already.
 *
 * In short, make sure you hash any inodes _before_ you start marking
 * them dirty.
 *
 * Note that for blockdevs, inode->dirtied_when represents the dirtying time of
 * the block-special inode (/dev/hda1) itself.  And the ->dirtied_when field of
 * the kernel-internal blockdev inode represents the dirtying time of the
 * blockdev's pages.  This is why for I_DIRTY_PAGES we always use
 * page->mapping->host, so the page-dirtying time is recorded in the internal
 * blockdev inode.
 */
#define I_DIRTY_INODE (I_DIRTY_SYNC | I_DIRTY_DATASYNC)
void __mark_inode_dirty(struct inode *inode, int flags)
{
	struct super_block *sb = inode->i_sb;
	struct backing_dev_info *bdi = NULL;
	int dirtytime;

	trace_writeback_mark_inode_dirty(inode, flags);

	/*
	 * Don't do this for I_DIRTY_PAGES - that doesn't actually
	 * dirty the inode itself
	 */
	if (flags & (I_DIRTY_SYNC | I_DIRTY_DATASYNC | I_DIRTY_TIME)) {
		trace_writeback_dirty_inode_start(inode, flags);

		if (sb->s_op->dirty_inode)
			sb->s_op->dirty_inode(inode, flags);

		trace_writeback_dirty_inode(inode, flags);
	}
	if (flags & I_DIRTY_INODE)
		flags &= ~I_DIRTY_TIME;
	dirtytime = flags & I_DIRTY_TIME;

	/*
	 * Paired with smp_mb() in __writeback_single_inode() for the
	 * following lockless i_state test.  See there for details.
	 */
	smp_mb();

	if (((inode->i_state & flags) == flags) ||
	    (dirtytime && (inode->i_state & I_DIRTY_INODE)))
		return;

	if (unlikely(block_dump))
		block_dump___mark_inode_dirty(inode);

	spin_lock(&inode->i_lock);
	if (dirtytime && (inode->i_state & I_DIRTY_INODE))
		goto out_unlock_inode;
	if ((inode->i_state & flags) != flags) {
		const int was_dirty = inode->i_state & I_DIRTY;

		inode_attach_wb(inode, NULL);

		if (flags & I_DIRTY_INODE)
			inode->i_state &= ~I_DIRTY_TIME;
		inode->i_state |= flags;

		/*
		 * If the inode is being synced, just update its dirty state.
		 * The unlocker will place the inode on the appropriate
		 * superblock list, based upon its state.
		 */
		if (inode->i_state & I_SYNC)
			goto out_unlock_inode;

		/*
		 * Only add valid (hashed) inodes to the superblock's
		 * dirty list.  Add blockdev inodes as well.
		 */
		if (!S_ISBLK(inode->i_mode)) {
			if (inode_unhashed(inode))
				goto out_unlock_inode;
		}
		if (inode->i_state & I_FREEING)
			goto out_unlock_inode;

		/*
		 * If the inode was already on b_dirty/b_io/b_more_io, don't
		 * reposition it (that would break b_dirty time-ordering).
		 */
		if (!was_dirty) {
			struct list_head *dirty_list;
			bool wakeup_bdi = false;
			bdi = inode_to_bdi(inode);

			spin_unlock(&inode->i_lock);
			spin_lock(&bdi->wb.list_lock);

			WARN(bdi_cap_writeback_dirty(bdi) &&
			     !test_bit(WB_registered, &bdi->wb.state),
			     "bdi-%s not registered\n", bdi->name);

			inode->dirtied_when = jiffies;
			if (dirtytime)
				inode->dirtied_time_when = jiffies;

			if (inode->i_state & (I_DIRTY_INODE | I_DIRTY_PAGES))
				dirty_list = &bdi->wb.b_dirty;
			else
				dirty_list = &bdi->wb.b_dirty_time;

			wakeup_bdi = inode_wb_list_move_locked(inode, &bdi->wb,
							       dirty_list);

			spin_unlock(&bdi->wb.list_lock);
			trace_writeback_dirty_inode_enqueue(inode);

			/*
			 * If this is the first dirty inode for this bdi,
			 * we have to wake-up the corresponding bdi thread
			 * to make sure background write-back happens
			 * later.
			 */
			if (bdi_cap_writeback_dirty(bdi) && wakeup_bdi)
				wb_wakeup_delayed(&bdi->wb);
			return;
		}
	}
out_unlock_inode:
	spin_unlock(&inode->i_lock);

}
EXPORT_SYMBOL(__mark_inode_dirty);

static void wait_sb_inodes(struct super_block *sb)
{
	struct inode *inode, *old_inode = NULL;

	/*
	 * We need to be protected against the filesystem going from
	 * r/o to r/w or vice versa.
	 */
	WARN_ON(!rwsem_is_locked(&sb->s_umount));

	spin_lock(&inode_sb_list_lock);

	/*
	 * Data integrity sync. Must wait for all pages under writeback,
	 * because there may have been pages dirtied before our sync
	 * call, but which had writeout started before we write it out.
	 * In which case, the inode may not be on the dirty list, but
	 * we still have to wait for that writeout.
	 */
	list_for_each_entry(inode, &sb->s_inodes, i_sb_list) {
		struct address_space *mapping = inode->i_mapping;

		spin_lock(&inode->i_lock);
		if ((inode->i_state & (I_FREEING|I_WILL_FREE|I_NEW)) ||
		    (mapping->nrpages == 0)) {
			spin_unlock(&inode->i_lock);
			continue;
		}
		__iget(inode);
		spin_unlock(&inode->i_lock);
		spin_unlock(&inode_sb_list_lock);

		/*
		 * We hold a reference to 'inode' so it couldn't have been
		 * removed from s_inodes list while we dropped the
		 * inode_sb_list_lock.  We cannot iput the inode now as we can
		 * be holding the last reference and we cannot iput it under
		 * inode_sb_list_lock. So we keep the reference and iput it
		 * later.
		 */
		iput(old_inode);
		old_inode = inode;

		filemap_fdatawait(mapping);

		cond_resched();

		spin_lock(&inode_sb_list_lock);
	}
	spin_unlock(&inode_sb_list_lock);
	iput(old_inode);
}

/**
 * writeback_inodes_sb_nr -	writeback dirty inodes from given super_block
 * @sb: the superblock
 * @nr: the number of pages to write
 * @reason: reason why some writeback work initiated
 *
 * Start writeback on some inodes on this super_block. No guarantees are made
 * on how many (if any) will be written, and this function does not wait
 * for IO completion of submitted IO.
 */
void writeback_inodes_sb_nr(struct super_block *sb,
			    unsigned long nr,
			    enum wb_reason reason)
{
	DECLARE_COMPLETION_ONSTACK(done);
	struct wb_writeback_work work = {
		.sb			= sb,
		.sync_mode		= WB_SYNC_NONE,
		.tagged_writepages	= 1,
		.done			= &done,
		.nr_pages		= nr,
		.reason			= reason,
	};
	struct backing_dev_info *bdi = sb->s_bdi;

	if (!bdi_has_dirty_io(bdi) || bdi == &noop_backing_dev_info)
		return;
	WARN_ON(!rwsem_is_locked(&sb->s_umount));
	wb_queue_work(&bdi->wb, &work);
	wait_for_completion(&done);
}
EXPORT_SYMBOL(writeback_inodes_sb_nr);

/**
 * writeback_inodes_sb	-	writeback dirty inodes from given super_block
 * @sb: the superblock
 * @reason: reason why some writeback work was initiated
 *
 * Start writeback on some inodes on this super_block. No guarantees are made
 * on how many (if any) will be written, and this function does not wait
 * for IO completion of submitted IO.
 */
void writeback_inodes_sb(struct super_block *sb, enum wb_reason reason)
{
	return writeback_inodes_sb_nr(sb, get_nr_dirty_pages(), reason);
}
EXPORT_SYMBOL(writeback_inodes_sb);

/**
 * try_to_writeback_inodes_sb_nr - try to start writeback if none underway
 * @sb: the superblock
 * @nr: the number of pages to write
 * @reason: the reason of writeback
 *
 * Invoke writeback_inodes_sb_nr if no writeback is currently underway.
 * Returns 1 if writeback was started, 0 if not.
 */
int try_to_writeback_inodes_sb_nr(struct super_block *sb,
				  unsigned long nr,
				  enum wb_reason reason)
{
	if (writeback_in_progress(&sb->s_bdi->wb))
		return 1;

	if (!down_read_trylock(&sb->s_umount))
		return 0;

	writeback_inodes_sb_nr(sb, nr, reason);
	up_read(&sb->s_umount);
	return 1;
}
EXPORT_SYMBOL(try_to_writeback_inodes_sb_nr);

/**
 * try_to_writeback_inodes_sb - try to start writeback if none underway
 * @sb: the superblock
 * @reason: reason why some writeback work was initiated
 *
 * Implement by try_to_writeback_inodes_sb_nr()
 * Returns 1 if writeback was started, 0 if not.
 */
int try_to_writeback_inodes_sb(struct super_block *sb, enum wb_reason reason)
{
	return try_to_writeback_inodes_sb_nr(sb, get_nr_dirty_pages(), reason);
}
EXPORT_SYMBOL(try_to_writeback_inodes_sb);

/**
 * sync_inodes_sb	-	sync sb inode pages
 * @sb: the superblock
 *
 * This function writes and waits on any dirty inode belonging to this
 * super_block.
 */
void sync_inodes_sb(struct super_block *sb)
{
	DECLARE_COMPLETION_ONSTACK(done);
	struct wb_writeback_work work = {
		.sb		= sb,
		.sync_mode	= WB_SYNC_ALL,
		.nr_pages	= LONG_MAX,
		.range_cyclic	= 0,
		.done		= &done,
		.reason		= WB_REASON_SYNC,
		.for_sync	= 1,
	};
	struct backing_dev_info *bdi = sb->s_bdi;

	/* Nothing to do? */
	if (!bdi_has_dirty_io(bdi) || bdi == &noop_backing_dev_info)
		return;
	WARN_ON(!rwsem_is_locked(&sb->s_umount));

	wb_queue_work(&bdi->wb, &work);
	wait_for_completion(&done);

	wait_sb_inodes(sb);
}
EXPORT_SYMBOL(sync_inodes_sb);

/**
 * write_inode_now	-	write an inode to disk
 * @inode: inode to write to disk
 * @sync: whether the write should be synchronous or not
 *
 * This function commits an inode to disk immediately if it is dirty. This is
 * primarily needed by knfsd.
 *
 * The caller must either have a ref on the inode or must have set I_WILL_FREE.
 */
int write_inode_now(struct inode *inode, int sync)
{
	struct bdi_writeback *wb = &inode_to_bdi(inode)->wb;
	struct writeback_control wbc = {
		.nr_to_write = LONG_MAX,
		.sync_mode = sync ? WB_SYNC_ALL : WB_SYNC_NONE,
		.range_start = 0,
		.range_end = LLONG_MAX,
	};

	if (!mapping_cap_writeback_dirty(inode->i_mapping))
		wbc.nr_to_write = 0;

	might_sleep();
	return writeback_single_inode(inode, wb, &wbc);
}
EXPORT_SYMBOL(write_inode_now);

/**
 * sync_inode - write an inode and its pages to disk.
 * @inode: the inode to sync
 * @wbc: controls the writeback mode
 *
 * sync_inode() will write an inode and its pages to disk.  It will also
 * correctly update the inode on its superblock's dirty inode lists and will
 * update inode->i_state.
 *
 * The caller must have a ref on the inode.
 */
int sync_inode(struct inode *inode, struct writeback_control *wbc)
{
	return writeback_single_inode(inode, &inode_to_bdi(inode)->wb, wbc);
}
EXPORT_SYMBOL(sync_inode);

/**
 * sync_inode_metadata - write an inode to disk
 * @inode: the inode to sync
 * @wait: wait for I/O to complete.
 *
 * Write an inode to disk and adjust its dirty state after completion.
 *
 * Note: only writes the actual inode, no associated data or other metadata.
 */
int sync_inode_metadata(struct inode *inode, int wait)
{
	struct writeback_control wbc = {
		.sync_mode = wait ? WB_SYNC_ALL : WB_SYNC_NONE,
		.nr_to_write = 0, /* metadata-only */
	};

	return sync_inode(inode, &wbc);
}
EXPORT_SYMBOL(sync_inode_metadata);