i915_guc_reg.h

/*
 * Copyright © 2014 Intel Corporation
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
 * IN THE SOFTWARE.
 *
 */
#ifndef _I915_GUC_REG_H_
#define _I915_GUC_REG_H_

/* Definitions of GuC H/W registers, bits, etc */

#define GUC_STATUS			0xc000
#define   GS_BOOTROM_SHIFT		1
#define   GS_BOOTROM_MASK		  (0x7F << GS_BOOTROM_SHIFT)
#define   GS_BOOTROM_RSA_FAILED		  (0x50 << GS_BOOTROM_SHIFT)
#define   GS_UKERNEL_SHIFT		8
#define   GS_UKERNEL_MASK		  (0xFF << GS_UKERNEL_SHIFT)
#define   GS_UKERNEL_LAPIC_DONE		  (0x30 << GS_UKERNEL_SHIFT)
#define   GS_UKERNEL_DPC_ERROR		  (0x60 << GS_UKERNEL_SHIFT)
#define   GS_UKERNEL_READY		  (0xF0 << GS_UKERNEL_SHIFT)
#define   GS_MIA_SHIFT			16
#define   GS_MIA_MASK			  (0x07 << GS_MIA_SHIFT)

#define SOFT_SCRATCH(n)			(0xc180 + ((n) * 4))

#define UOS_RSA_SCRATCH_0		0xc200
#define DMA_ADDR_0_LOW			0xc300
#define DMA_ADDR_0_HIGH			0xc304
#define DMA_ADDR_1_LOW			0xc308
#define DMA_ADDR_1_HIGH			0xc30c
#define   DMA_ADDRESS_SPACE_WOPCM	  (7 << 16)
#define   DMA_ADDRESS_SPACE_GTT		  (8 << 16)
#define DMA_COPY_SIZE			0xc310
#define DMA_CTRL			0xc314
#define   UOS_MOVE			  (1<<4)
#define   START_DMA			  (1<<0)
#define DMA_GUC_WOPCM_OFFSET		0xc340
#define   GUC_WOPCM_OFFSET_VALUE	  0x80000	/* 512KB */

#define GUC_WOPCM_SIZE			0xc050
#define   GUC_WOPCM_SIZE_VALUE  	  (0x80 << 12)	/* 512KB */

/* GuC addresses below GUC_WOPCM_TOP don't map through the GTT */
#define	GUC_WOPCM_TOP			(GUC_WOPCM_SIZE_VALUE)

#define GEN8_GT_PM_CONFIG		0x138140
#define GEN9LP_GT_PM_CONFIG		0x138140
#define GEN9_GT_PM_CONFIG		0x13816c
#define   GT_DOORBELL_ENABLE		  (1<<0)

#define GEN8_GTCR			0x4274
#define   GEN8_GTCR_INVALIDATE		  (1<<0)

#define GUC_ARAT_C6DIS			0xA178

#define GUC_SHIM_CONTROL		0xc064
#define   GUC_DISABLE_SRAM_INIT_TO_ZEROES	(1<<0)
#define   GUC_ENABLE_READ_CACHE_LOGIC		(1<<1)
#define   GUC_ENABLE_MIA_CACHING		(1<<2)
#define   GUC_GEN10_MSGCH_ENABLE		(1<<4)
#define   GUC_ENABLE_READ_CACHE_FOR_SRAM_DATA	(1<<9)
#define   GUC_ENABLE_READ_CACHE_FOR_WOPCM_DATA	(1<<10)
#define   GUC_ENABLE_MIA_CLOCK_GATING		(1<<15)
#define   GUC_GEN10_SHIM_WC_ENABLE		(1<<21)

#define GUC_SHIM_CONTROL_VALUE	(GUC_DISABLE_SRAM_INIT_TO_ZEROES	| \
				 GUC_ENABLE_READ_CACHE_LOGIC		| \
				 GUC_ENABLE_MIA_CACHING			| \
				 GUC_ENABLE_READ_CACHE_FOR_SRAM_DATA	| \
				 GUC_ENABLE_READ_CACHE_FOR_WOPCM_DATA	| \
				 GUC_ENABLE_MIA_CLOCK_GATING)

#define HOST2GUC_INTERRUPT		0xc4c8
#define   HOST2GUC_TRIGGER		  (1<<0)

#define DRBMISC1			0x1984
#define   DOORBELL_ENABLE		  (1<<0)

#define GEN8_DRBREGL(x)			(0x1000 + (x) * 8)
#define   GEN8_DRB_VALID		  (1<<0)
#define GEN8_DRBREGU(x)			(GEN8_DRBREGL(x) + 4)

#define DE_GUCRMR			0x44054

#define GUC_BCS_RCS_IER			0xC550
#define GUC_VCS2_VCS1_IER		0xC554
#define GUC_WD_VECS_IER			0xC558
#define GUC_PM_P24C_IER			0xC55C

#endif