alps.c

/*
 * ALPS touchpad PS/2 mouse driver
 *
 * Copyright (c) 2003 Neil Brown <neilb@cse.unsw.edu.au>
 * Copyright (c) 2003-2005 Peter Osterlund <petero2@telia.com>
 * Copyright (c) 2004 Dmitry Torokhov <dtor@mail.ru>
 * Copyright (c) 2005 Vojtech Pavlik <vojtech@suse.cz>
 * Copyright (c) 2009 Sebastian Kapfer <sebastian_kapfer@gmx.net>
 *
 * ALPS detection, tap switching and status querying info is taken from
 * tpconfig utility (by C. Scott Ananian and Bruce Kall).
 *
 * This program is free software; you can redistribute it and/or modify it
 * under the terms of the GNU General Public License version 2 as published by
 * the Free Software Foundation.
 */

#include <linux/input.h>
#include <linux/serio.h>
#include <linux/libps2.h>

#include "psmouse.h"
#include "alps.h"

#undef DEBUG
#ifdef DEBUG
#define dbg(format, arg...) printk(KERN_INFO "alps.c: " format "\n", ## arg)
#else
#define dbg(format, arg...) do {} while (0)
#endif

#define ALPS_OLDPROTO		0x01	/* old style input */
#define ALPS_DUALPOINT		0x02	/* touchpad has trackstick */
#define ALPS_PASS		0x04	/* device has a pass-through port */

#define ALPS_WHEEL		0x08	/* hardware wheel present */
#define ALPS_FW_BK_1		0x10	/* front & back buttons present */
#define ALPS_FW_BK_2		0x20	/* front & back buttons present */
#define ALPS_FOUR_BUTTONS	0x40	/* 4 direction button present */
#define ALPS_PS2_INTERLEAVED	0x80	/* 3-byte PS/2 packet interleaved with
					   6-byte ALPS packet */

static const struct alps_model_info alps_model_data[] = {
	{ { 0x32, 0x02, 0x14 },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
	{ { 0x33, 0x02, 0x0a },	0x88, 0xf8, ALPS_OLDPROTO },		  /* UMAX-530T */
	{ { 0x53, 0x02, 0x0a },	0xf8, 0xf8, 0 },
	{ { 0x53, 0x02, 0x14 },	0xf8, 0xf8, 0 },
	{ { 0x60, 0x03, 0xc8 }, 0xf8, 0xf8, 0 },			  /* HP ze1115 */
	{ { 0x63, 0x02, 0x0a },	0xf8, 0xf8, 0 },
	{ { 0x63, 0x02, 0x14 },	0xf8, 0xf8, 0 },
	{ { 0x63, 0x02, 0x28 },	0xf8, 0xf8, ALPS_FW_BK_2 },		  /* Fujitsu Siemens S6010 */
	{ { 0x63, 0x02, 0x3c },	0x8f, 0x8f, ALPS_WHEEL },		  /* Toshiba Satellite S2400-103 */
	{ { 0x63, 0x02, 0x50 },	0xef, 0xef, ALPS_FW_BK_1 },		  /* NEC Versa L320 */
	{ { 0x63, 0x02, 0x64 },	0xf8, 0xf8, 0 },
	{ { 0x63, 0x03, 0xc8 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D800 */
	{ { 0x73, 0x00, 0x0a },	0xf8, 0xf8, ALPS_DUALPOINT },		  /* ThinkPad R61 8918-5QG */
	{ { 0x73, 0x02, 0x0a },	0xf8, 0xf8, 0 },
	{ { 0x73, 0x02, 0x14 },	0xf8, 0xf8, ALPS_FW_BK_2 },		  /* Ahtec Laptop */
	{ { 0x20, 0x02, 0x0e },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */
	{ { 0x22, 0x02, 0x0a },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
	{ { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
	/* Dell Latitude E5500, E6400, E6500, Precision M4400 */
	{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
	{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS },	  /* Dell Vostro 1400 */
};

/*
 * XXX - this entry is suspicious. First byte has zero lower nibble,
 * which is what a normal mouse would report. Also, the value 0x0e
 * isn't valid per PS/2 spec.
 */

/*
 * PS/2 packet format
 *
 * byte 0:  0    0 YSGN XSGN    1    M    R    L
 * byte 1: X7   X6   X5   X4   X3   X2   X1   X0
 * byte 2: Y7   Y6   Y5   Y4   Y3   Y2   Y1   Y0
 *
 * Note that the device never signals overflow condition.
 *
 * ALPS absolute Mode - new format
 *
 * byte 0:  1    ?    ?    ?    1    ?    ?    ?
 * byte 1:  0   x6   x5   x4   x3   x2   x1   x0
 * byte 2:  0  x10   x9   x8   x7    ?  fin  ges
 * byte 3:  0   y9   y8   y7    1    M    R    L
 * byte 4:  0   y6   y5   y4   y3   y2   y1   y0
 * byte 5:  0   z6   z5   z4   z3   z2   z1   z0
 *
 * Dualpoint device -- interleaved packet format
 *
 * byte 0:    1    1    0    0    1    1    1    1
 * byte 1:    0   x6   x5   x4   x3   x2   x1   x0
 * byte 2:    0  x10   x9   x8   x7    0  fin  ges
 * byte 3:    0    0 YSGN XSGN    1    1    1    1
 * byte 4:   X7   X6   X5   X4   X3   X2   X1   X0
 * byte 5:   Y7   Y6   Y5   Y4   Y3   Y2   Y1   Y0
 * byte 6:    0   y9   y8   y7    1    m    r    l
 * byte 7:    0   y6   y5   y4   y3   y2   y1   y0
 * byte 8:    0   z6   z5   z4   z3   z2   z1   z0
 *
 * CAPITALS = stick, miniscules = touchpad
 *
 * ?'s can have different meanings on different models,
 * such as wheel rotation, extra buttons, stick buttons
 * on a dualpoint, etc.
 */

static bool alps_is_valid_first_byte(const struct alps_model_info *model,
				     unsigned char data)
{
	return (data & model->mask0) == model->byte0;
}

static void alps_report_buttons(struct psmouse *psmouse,
				struct input_dev *dev1, struct input_dev *dev2,
				int left, int right, int middle)
{
	struct alps_data *priv = psmouse->private;
	const struct alps_model_info *model = priv->i;

	if (model->flags & ALPS_PS2_INTERLEAVED) {
		struct input_dev *dev;

		/*
		 * If shared button has already been reported on the
		 * other device (dev2) then this event should be also
		 * sent through that device.
		 */
		dev = test_bit(BTN_LEFT, dev2->key) ? dev2 : dev1;
		input_report_key(dev, BTN_LEFT, left);

		dev = test_bit(BTN_RIGHT, dev2->key) ? dev2 : dev1;
		input_report_key(dev, BTN_RIGHT, right);

		dev = test_bit(BTN_MIDDLE, dev2->key) ? dev2 : dev1;
		input_report_key(dev, BTN_MIDDLE, middle);

		/*
		 * Sync the _other_ device now, we'll do the first
		 * device later once we report the rest of the events.
		 */
		input_sync(dev2);
	} else {
		/*
		 * For devices with non-interleaved packets we know what
		 * device buttons belong to so we can simply report them.
		 */
		input_report_key(dev1, BTN_LEFT, left);
		input_report_key(dev1, BTN_RIGHT, right);
		input_report_key(dev1, BTN_MIDDLE, middle);
	}
}

static void alps_process_packet(struct psmouse *psmouse)
{
	struct alps_data *priv = psmouse->private;
	const struct alps_model_info *model = priv->i;
	unsigned char *packet = psmouse->packet;
	struct input_dev *dev = psmouse->dev;
	struct input_dev *dev2 = priv->dev2;
	int x, y, z, ges, fin, left, right, middle;
	int back = 0, forward = 0;

	if (model->flags & ALPS_OLDPROTO) {
		left = packet[2] & 0x10;
		right = packet[2] & 0x08;
		middle = 0;
		x = packet[1] | ((packet[0] & 0x07) << 7);
		y = packet[4] | ((packet[3] & 0x07) << 7);
		z = packet[5];
	} else {
		left = packet[3] & 1;
		right = packet[3] & 2;
		middle = packet[3] & 4;
		x = packet[1] | ((packet[2] & 0x78) << (7 - 3));
		y = packet[4] | ((packet[3] & 0x70) << (7 - 4));
		z = packet[5];
	}

	if (model->flags & ALPS_FW_BK_1) {
		back = packet[0] & 0x10;
		forward = packet[2] & 4;
	}

	if (model->flags & ALPS_FW_BK_2) {
		back = packet[3] & 4;
		forward = packet[2] & 4;
		if ((middle = forward && back))
			forward = back = 0;
	}

	ges = packet[2] & 1;
	fin = packet[2] & 2;

	if ((model->flags & ALPS_DUALPOINT) && z == 127) {
		input_report_rel(dev2, REL_X,  (x > 383 ? (x - 768) : x));
		input_report_rel(dev2, REL_Y, -(y > 255 ? (y - 512) : y));

		alps_report_buttons(psmouse, dev2, dev, left, right, middle);

		input_sync(dev2);
		return;
	}

	alps_report_buttons(psmouse, dev, dev2, left, right, middle);

	/* Convert hardware tap to a reasonable Z value */
	if (ges && !fin)
		z = 40;

	/*
	 * A "tap and drag" operation is reported by the hardware as a transition
	 * from (!fin && ges) to (fin && ges). This should be translated to the
	 * sequence Z>0, Z==0, Z>0, so the Z==0 event has to be generated manually.
	 */
	if (ges && fin && !priv->prev_fin) {
		input_report_abs(dev, ABS_X, x);
		input_report_abs(dev, ABS_Y, y);
		input_report_abs(dev, ABS_PRESSURE, 0);
		input_report_key(dev, BTN_TOOL_FINGER, 0);
		input_sync(dev);
	}
	priv->prev_fin = fin;

	if (z > 30)
		input_report_key(dev, BTN_TOUCH, 1);
	if (z < 25)
		input_report_key(dev, BTN_TOUCH, 0);

	if (z > 0) {
		input_report_abs(dev, ABS_X, x);
		input_report_abs(dev, ABS_Y, y);
	}

	input_report_abs(dev, ABS_PRESSURE, z);
	input_report_key(dev, BTN_TOOL_FINGER, z > 0);

	if (model->flags & ALPS_WHEEL)
		input_report_rel(dev, REL_WHEEL, ((packet[2] << 1) & 0x08) - ((packet[0] >> 4) & 0x07));

	if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
		input_report_key(dev, BTN_FORWARD, forward);
		input_report_key(dev, BTN_BACK, back);
	}

	if (model->flags & ALPS_FOUR_BUTTONS) {
		input_report_key(dev, BTN_0, packet[2] & 4);
		input_report_key(dev, BTN_1, packet[0] & 0x10);
		input_report_key(dev, BTN_2, packet[3] & 4);
		input_report_key(dev, BTN_3, packet[0] & 0x20);
	}

	input_sync(dev);
}

static void alps_report_bare_ps2_packet(struct psmouse *psmouse,
					unsigned char packet[],
					bool report_buttons)
{
	struct alps_data *priv = psmouse->private;
	struct input_dev *dev2 = priv->dev2;

	if (report_buttons)
		alps_report_buttons(psmouse, dev2, psmouse->dev,
				packet[0] & 1, packet[0] & 2, packet[0] & 4);

	input_report_rel(dev2, REL_X,
		packet[1] ? packet[1] - ((packet[0] << 4) & 0x100) : 0);
	input_report_rel(dev2, REL_Y,
		packet[2] ? ((packet[0] << 3) & 0x100) - packet[2] : 0);

	input_sync(dev2);
}

static psmouse_ret_t alps_handle_interleaved_ps2(struct psmouse *psmouse)
{
	struct alps_data *priv = psmouse->private;

	if (psmouse->pktcnt < 6)
		return PSMOUSE_GOOD_DATA;

	if (psmouse->pktcnt == 6) {
		/*
		 * Start a timer to flush the packet if it ends up last
		 * 6-byte packet in the stream. Timer needs to fire
		 * psmouse core times out itself. 20 ms should be enough
		 * to decide if we are getting more data or not.
		 */
		mod_timer(&priv->timer, jiffies + msecs_to_jiffies(20));
		return PSMOUSE_GOOD_DATA;
	}

	del_timer(&priv->timer);

	if (psmouse->packet[6] & 0x80) {

		/*
		 * Highest bit is set - that means we either had
		 * complete ALPS packet and this is start of the
		 * next packet or we got garbage.
		 */

		if (((psmouse->packet[3] |
		      psmouse->packet[4] |
		      psmouse->packet[5]) & 0x80) ||
		    (!alps_is_valid_first_byte(priv->i, psmouse->packet[6]))) {
			dbg("refusing packet %x %x %x %x "
			    "(suspected interleaved ps/2)\n",
			    psmouse->packet[3], psmouse->packet[4],
			    psmouse->packet[5], psmouse->packet[6]);
			return PSMOUSE_BAD_DATA;
		}

		alps_process_packet(psmouse);

		/* Continue with the next packet */
		psmouse->packet[0] = psmouse->packet[6];
		psmouse->pktcnt = 1;

	} else {

		/*
		 * High bit is 0 - that means that we indeed got a PS/2
		 * packet in the middle of ALPS packet.
		 *
		 * There is also possibility that we got 6-byte ALPS
		 * packet followed  by 3-byte packet from trackpoint. We
		 * can not distinguish between these 2 scenarios but
		 * becase the latter is unlikely to happen in course of
		 * normal operation (user would need to press all
		 * buttons on the pad and start moving trackpoint
		 * without touching the pad surface) we assume former.
		 * Even if we are wrong the wost thing that would happen
		 * the cursor would jump but we should not get protocol
		 * desynchronization.
		 */

		alps_report_bare_ps2_packet(psmouse, &psmouse->packet[3],
					    false);

		/*
		 * Continue with the standard ALPS protocol handling,
		 * but make sure we won't process it as an interleaved
		 * packet again, which may happen if all buttons are
		 * pressed. To avoid this let's reset the 4th bit which
		 * is normally 1.
		 */
		psmouse->packet[3] = psmouse->packet[6] & 0xf7;
		psmouse->pktcnt = 4;
	}

	return PSMOUSE_GOOD_DATA;
}

static void alps_flush_packet(unsigned long data)
{
	struct psmouse *psmouse = (struct psmouse *)data;

	serio_pause_rx(psmouse->ps2dev.serio);

	if (psmouse->pktcnt == 6) {

		/*
		 * We did not any more data in reasonable amount of time.
		 * Validate the last 3 bytes and process as a standard
		 * ALPS packet.
		 */
		if ((psmouse->packet[3] |
		     psmouse->packet[4] |
		     psmouse->packet[5]) & 0x80) {
			dbg("refusing packet %x %x %x "
			    "(suspected interleaved ps/2)\n",
			    psmouse->packet[3], psmouse->packet[4],
			    psmouse->packet[5]);
		} else {
			alps_process_packet(psmouse);
		}
		psmouse->pktcnt = 0;
	}

	serio_continue_rx(psmouse->ps2dev.serio);
}

static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
{
	struct alps_data *priv = psmouse->private;
	const struct alps_model_info *model = priv->i;

	if ((psmouse->packet[0] & 0xc8) == 0x08) { /* PS/2 packet */
		if (psmouse->pktcnt == 3) {
			alps_report_bare_ps2_packet(psmouse, psmouse->packet,
						    true);
			return PSMOUSE_FULL_PACKET;
		}
		return PSMOUSE_GOOD_DATA;
	}

	/* Check for PS/2 packet stuffed in the middle of ALPS packet. */

	if ((model->flags & ALPS_PS2_INTERLEAVED) &&
	    psmouse->pktcnt >= 4 && (psmouse->packet[3] & 0x0f) == 0x0f) {
		return alps_handle_interleaved_ps2(psmouse);
	}

	if (!alps_is_valid_first_byte(model, psmouse->packet[0])) {
		dbg("refusing packet[0] = %x (mask0 = %x, byte0 = %x)\n",
		    psmouse->packet[0], model->mask0, model->byte0);
		return PSMOUSE_BAD_DATA;
	}

	/* Bytes 2 - 6 should have 0 in the highest bit */
	if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 &&
	    (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
		dbg("refusing packet[%i] = %x\n",
		    psmouse->pktcnt - 1, psmouse->packet[psmouse->pktcnt - 1]);
		return PSMOUSE_BAD_DATA;
	}

	if (psmouse->pktcnt == 6) {
		alps_process_packet(psmouse);
		return PSMOUSE_FULL_PACKET;
	}

	return PSMOUSE_GOOD_DATA;
}

static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *version)
{
	struct ps2dev *ps2dev = &psmouse->ps2dev;
	static const unsigned char rates[] = { 0, 10, 20, 40, 60, 80, 100, 200 };
	unsigned char param[4];
	int i;

	/*
	 * First try "E6 report".
	 * ALPS should return 0,0,10 or 0,0,100
	 */
	param[0] = 0;
	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11) ||
	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE11))
		return NULL;

	param[0] = param[1] = param[2] = 0xff;
	if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
		return NULL;

	dbg("E6 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]);

	if (param[0] != 0 || param[1] != 0 || (param[2] != 10 && param[2] != 100))
		return NULL;

	/*
	 * Now try "E7 report". Allowed responses are in
	 * alps_model_data[].signature
	 */
	param[0] = 0;
	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRES) ||
	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE21) ||
	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE21) ||
	    ps2_command(ps2dev,  NULL, PSMOUSE_CMD_SETSCALE21))
		return NULL;

	param[0] = param[1] = param[2] = 0xff;
	if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
		return NULL;

	dbg("E7 report: %2.2x %2.2x %2.2x", param[0], param[1], param[2]);

	if (version) {
		for (i = 0; i < ARRAY_SIZE(rates) && param[2] != rates[i]; i++)
			/* empty */;
		*version = (param[0] << 8) | (param[1] << 4) | i;
	}

	for (i = 0; i < ARRAY_SIZE(alps_model_data); i++)
		if (!memcmp(param, alps_model_data[i].signature,
			    sizeof(alps_model_data[i].signature)))
			return alps_model_data + i;

	return NULL;
}

/*
 * For DualPoint devices select the device that should respond to
 * subsequent commands. It looks like glidepad is behind stickpointer,
 * I'd thought it would be other way around...
 */
static int alps_passthrough_mode(struct psmouse *psmouse, bool enable)
{
	struct ps2dev *ps2dev = &psmouse->ps2dev;
	int cmd = enable ? PSMOUSE_CMD_SETSCALE21 : PSMOUSE_CMD_SETSCALE11;

	if (ps2_command(ps2dev, NULL, cmd) ||
	    ps2_command(ps2dev, NULL, cmd) ||
	    ps2_command(ps2dev, NULL, cmd) ||
	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE))
		return -1;

	/* we may get 3 more bytes, just ignore them */
	ps2_drain(ps2dev, 3, 100);

	return 0;
}

static int alps_absolute_mode(struct psmouse *psmouse)
{
	struct ps2dev *ps2dev = &psmouse->ps2dev;

	/* Try ALPS magic knock - 4 disable before enable */
	if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE))
		return -1;

	/*
	 * Switch mouse to poll (remote) mode so motion data will not
	 * get in our way
	 */
	return ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETPOLL);
}

static int alps_get_status(struct psmouse *psmouse, char *param)
{
	struct ps2dev *ps2dev = &psmouse->ps2dev;

	/* Get status: 0xF5 0xF5 0xF5 0xE9 */
	if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
	    ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
		return -1;

	dbg("Status: %2.2x %2.2x %2.2x", param[0], param[1], param[2]);

	return 0;
}

/*
 * Turn touchpad tapping on or off. The sequences are:
 * 0xE9 0xF5 0xF5 0xF3 0x0A to enable,
 * 0xE9 0xF5 0xF5 0xE8 0x00 to disable.
 * My guess that 0xE9 (GetInfo) is here as a sync point.
 * For models that also have stickpointer (DualPoints) its tapping
 * is controlled separately (0xE6 0xE6 0xE6 0xF3 0x14|0x0A) but
 * we don't fiddle with it.
 */
static int alps_tap_mode(struct psmouse *psmouse, int enable)
{
	struct ps2dev *ps2dev = &psmouse->ps2dev;
	int cmd = enable ? PSMOUSE_CMD_SETRATE : PSMOUSE_CMD_SETRES;
	unsigned char tap_arg = enable ? 0x0A : 0x00;
	unsigned char param[4];

	if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO) ||
	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_DISABLE) ||
	    ps2_command(ps2dev, &tap_arg, cmd))
		return -1;

	if (alps_get_status(psmouse, param))
		return -1;

	return 0;
}

/*
 * alps_poll() - poll the touchpad for current motion packet.
 * Used in resync.
 */
static int alps_poll(struct psmouse *psmouse)
{
	struct alps_data *priv = psmouse->private;
	unsigned char buf[6];
	bool poll_failed;

	if (priv->i->flags & ALPS_PASS)
		alps_passthrough_mode(psmouse, true);

	poll_failed = ps2_command(&psmouse->ps2dev, buf,
				  PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)) < 0;

	if (priv->i->flags & ALPS_PASS)
		alps_passthrough_mode(psmouse, false);

	if (poll_failed || (buf[0] & priv->i->mask0) != priv->i->byte0)
		return -1;

	if ((psmouse->badbyte & 0xc8) == 0x08) {
/*
 * Poll the track stick ...
 */
		if (ps2_command(&psmouse->ps2dev, buf, PSMOUSE_CMD_POLL | (3 << 8)))
			return -1;
	}

	memcpy(psmouse->packet, buf, sizeof(buf));
	return 0;
}

static int alps_hw_init(struct psmouse *psmouse)
{
	struct alps_data *priv = psmouse->private;
	const struct alps_model_info *model = priv->i;

	if ((model->flags & ALPS_PASS) &&
	    alps_passthrough_mode(psmouse, true)) {
		return -1;
	}

	if (alps_tap_mode(psmouse, true)) {
		printk(KERN_WARNING "alps.c: Failed to enable hardware tapping\n");
		return -1;
	}

	if (alps_absolute_mode(psmouse)) {
		printk(KERN_ERR "alps.c: Failed to enable absolute mode\n");
		return -1;
	}

	if ((model->flags & ALPS_PASS) &&
	    alps_passthrough_mode(psmouse, false)) {
		return -1;
	}

	/* ALPS needs stream mode, otherwise it won't report any data */
	if (ps2_command(&psmouse->ps2dev, NULL, PSMOUSE_CMD_SETSTREAM)) {
		printk(KERN_ERR "alps.c: Failed to enable stream mode\n");
		return -1;
	}

	return 0;
}

static int alps_reconnect(struct psmouse *psmouse)
{
	const struct alps_model_info *model;

	psmouse_reset(psmouse);

	model = alps_get_model(psmouse, NULL);
	if (!model)
		return -1;

	return alps_hw_init(psmouse);
}

static void alps_disconnect(struct psmouse *psmouse)
{
	struct alps_data *priv = psmouse->private;

	psmouse_reset(psmouse);
	del_timer_sync(&priv->timer);
	input_unregister_device(priv->dev2);
	kfree(priv);
}

int alps_init(struct psmouse *psmouse)
{
	struct alps_data *priv;
	const struct alps_model_info *model;
	struct input_dev *dev1 = psmouse->dev, *dev2;
	int version;

	priv = kzalloc(sizeof(struct alps_data), GFP_KERNEL);
	dev2 = input_allocate_device();
	if (!priv || !dev2)
		goto init_fail;

	priv->dev2 = dev2;
	setup_timer(&priv->timer, alps_flush_packet, (unsigned long)psmouse);

	psmouse->private = priv;

	model = alps_get_model(psmouse, &version);
	if (!model)
		goto init_fail;

	priv->i = model;

	if (alps_hw_init(psmouse))
		goto init_fail;

	/*
	 * Undo part of setup done for us by psmouse core since touchpad
	 * is not a relative device.
	 */
	__clear_bit(EV_REL, dev1->evbit);
	__clear_bit(REL_X, dev1->relbit);
	__clear_bit(REL_Y, dev1->relbit);

	/*
	 * Now set up our capabilities.
	 */
	dev1->evbit[BIT_WORD(EV_KEY)] |= BIT_MASK(EV_KEY);
	dev1->keybit[BIT_WORD(BTN_TOUCH)] |= BIT_MASK(BTN_TOUCH);
	dev1->keybit[BIT_WORD(BTN_TOOL_FINGER)] |= BIT_MASK(BTN_TOOL_FINGER);
	dev1->keybit[BIT_WORD(BTN_LEFT)] |=
		BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);

	dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS);
	input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0);
	input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
	input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);

	if (model->flags & ALPS_WHEEL) {
		dev1->evbit[BIT_WORD(EV_REL)] |= BIT_MASK(EV_REL);
		dev1->relbit[BIT_WORD(REL_WHEEL)] |= BIT_MASK(REL_WHEEL);
	}

	if (model->flags & (ALPS_FW_BK_1 | ALPS_FW_BK_2)) {
		dev1->keybit[BIT_WORD(BTN_FORWARD)] |= BIT_MASK(BTN_FORWARD);
		dev1->keybit[BIT_WORD(BTN_BACK)] |= BIT_MASK(BTN_BACK);
	}

	if (model->flags & ALPS_FOUR_BUTTONS) {
		dev1->keybit[BIT_WORD(BTN_0)] |= BIT_MASK(BTN_0);
		dev1->keybit[BIT_WORD(BTN_1)] |= BIT_MASK(BTN_1);
		dev1->keybit[BIT_WORD(BTN_2)] |= BIT_MASK(BTN_2);
		dev1->keybit[BIT_WORD(BTN_3)] |= BIT_MASK(BTN_3);
	} else {
		dev1->keybit[BIT_WORD(BTN_MIDDLE)] |= BIT_MASK(BTN_MIDDLE);
	}

	snprintf(priv->phys, sizeof(priv->phys), "%s/input1", psmouse->ps2dev.serio->phys);
	dev2->phys = priv->phys;
	dev2->name = (model->flags & ALPS_DUALPOINT) ? "DualPoint Stick" : "PS/2 Mouse";
	dev2->id.bustype = BUS_I8042;
	dev2->id.vendor  = 0x0002;
	dev2->id.product = PSMOUSE_ALPS;
	dev2->id.version = 0x0000;
	dev2->dev.parent = &psmouse->ps2dev.serio->dev;

	dev2->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL);
	dev2->relbit[BIT_WORD(REL_X)] = BIT_MASK(REL_X) | BIT_MASK(REL_Y);
	dev2->keybit[BIT_WORD(BTN_LEFT)] =
		BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_MIDDLE) | BIT_MASK(BTN_RIGHT);

	if (input_register_device(priv->dev2))
		goto init_fail;

	psmouse->protocol_handler = alps_process_byte;
	psmouse->poll = alps_poll;
	psmouse->disconnect = alps_disconnect;
	psmouse->reconnect = alps_reconnect;
	psmouse->pktsize = 6;

	/* We are having trouble resyncing ALPS touchpads so disable it for now */
	psmouse->resync_time = 0;

	return 0;

init_fail:
	psmouse_reset(psmouse);
	input_free_device(dev2);
	kfree(priv);
	psmouse->private = NULL;
	return -1;
}

int alps_detect(struct psmouse *psmouse, bool set_properties)
{
	int version;
	const struct alps_model_info *model;

	model = alps_get_model(psmouse, &version);
	if (!model)
		return -1;

	if (set_properties) {
		psmouse->vendor = "ALPS";
		psmouse->name = model->flags & ALPS_DUALPOINT ?
				"DualPoint TouchPad" : "GlidePoint";
		psmouse->model = version;
	}
	return 0;
}