js_lucas_kanade.markdown

Optical Flow {#tutorial_js_lucas_kanade}
============

Goal
----

-   We will understand the concepts of optical flow and its estimation using Lucas-Kanade
    method.
-   We will use functions like **cv.calcOpticalFlowPyrLK()** to track feature points in a
    video.

Optical Flow
------------

Optical flow is the pattern of apparent motion of image objects between two consecutive frames
caused by the movement of object or camera. It is 2D vector field where each vector is a
displacement vector showing the movement of points from first frame to second. Consider the image
below (Image Courtesy: [Wikipedia article on Optical
Flow](http://en.wikipedia.org/wiki/Optical_flow)).

![image](images/optical_flow_basic1.jpg)

It shows a ball moving in 5 consecutive frames. The arrow shows its displacement vector. Optical
flow has many applications in areas like :

-   Structure from Motion
-   Video Compression
-   Video Stabilization ...

Optical flow works on several assumptions:

-#  The pixel intensities of an object do not change between consecutive frames.
2.  Neighbouring pixels have similar motion.

Consider a pixel \f$I(x,y,t)\f$ in first frame (Check a new dimension, time, is added here. Earlier we
were working with images only, so no need of time). It moves by distance \f$(dx,dy)\f$ in next frame
taken after \f$dt\f$ time. So since those pixels are the same and intensity does not change, we can say,

\f[I(x,y,t) = I(x+dx, y+dy, t+dt)\f]

Then take taylor series approximation of right-hand side, remove common terms and divide by \f$dt\f$ to
get the following equation:

\f[f_x u + f_y v + f_t = 0 \;\f]

where:

\f[f_x = \frac{\partial f}{\partial x} \; ; \; f_y = \frac{\partial f}{\partial y}\f]\f[u = \frac{dx}{dt} \; ; \; v = \frac{dy}{dt}\f]

Above equation is called Optical Flow equation. In it, we can find \f$f_x\f$ and \f$f_y\f$, they are image
gradients. Similarly \f$f_t\f$ is the gradient along time. But \f$(u,v)\f$ is unknown. We cannot solve this
one equation with two unknown variables. So several methods are provided to solve this problem and
one of them is Lucas-Kanade.

### Lucas-Kanade method

We have seen an assumption before, that all the neighbouring pixels will have similar motion.
Lucas-Kanade method takes a 3x3 patch around the point. So all the 9 points have the same motion. We
can find \f$(f_x, f_y, f_t)\f$ for these 9 points. So now our problem becomes solving 9 equations with
two unknown variables which is over-determined. A better solution is obtained with least square fit
method. Below is the final solution which is two equation-two unknown problem and solve to get the
solution.

\f[\begin{bmatrix} u \\ v \end{bmatrix} =
\begin{bmatrix}
    \sum_{i}{f_{x_i}}^2  &  \sum_{i}{f_{x_i} f_{y_i} } \\
    \sum_{i}{f_{x_i} f_{y_i}} & \sum_{i}{f_{y_i}}^2
\end{bmatrix}^{-1}
\begin{bmatrix}
    - \sum_{i}{f_{x_i} f_{t_i}} \\
    - \sum_{i}{f_{y_i} f_{t_i}}
\end{bmatrix}\f]

( Check similarity of inverse matrix with Harris corner detector. It denotes that corners are better
points to be tracked.)

So from user point of view, idea is simple, we give some points to track, we receive the optical
flow vectors of those points. But again there are some problems. Until now, we were dealing with
small motions. So it fails when there is large motion. So again we go for pyramids. When we go up in
the pyramid, small motions are removed and large motions becomes small motions. So applying
Lucas-Kanade there, we get optical flow along with the scale.

Lucas-Kanade Optical Flow in OpenCV.js
-----------------------------------

We use the function: **cv.calcOpticalFlowPyrLK (prevImg, nextImg, prevPts, nextPts, status, err, winSize =
new cv.Size(21, 21), maxLevel = 3, criteria = new cv.TermCriteria(cv.TermCriteria_COUNT+
cv.TermCriteria_EPS, 30, 0.01), flags = 0, minEigThreshold = 1e-4)**.
@param prevImg          first 8-bit input image or pyramid constructed by buildOpticalFlowPyramid.
@param nextImg          second input image or pyramid of the same size and the same type as prevImg.
@param prevPts          vector of 2D points for which the flow needs to be found; point coordinates must
be single-precision floating-point numbers.
@param nextPts          output vector of 2D points (with single-precision floating-point coordinates)
containing the calculated new positions of input features in the second image; when cv.OPTFLOW_USE_
INITIAL_FLOW flag is passed, the vector must have the same size as in the input.
@param status           output status vector (of unsigned chars); each element of the vector is set to 1
if the flow for the corresponding features has been found, otherwise, it is set to 0.
@param err              output vector of errors; each element of the vector is set to an error for the
corresponding feature, type of the error measure can be set in flags parameter; if the flow wasn't
found then the error is not defined (use the status parameter to find such cases).
@param winSize          size of the search window at each pyramid level.
@param maxLevel         0-based maximal pyramid level number; if set to 0, pyramids are not used (single
level), if set to 1, two levels are used, and so on; if pyramids are passed to input then algorithm
will use as many levels as pyramids have but no more than maxLevel.
@param criteria         parameter, specifying the termination criteria of the iterative search algorithm
(after the specified maximum number of iterations criteria.maxCount or when the search window moves
by less than criteria.epsilon.
@param flags            operation flags:
- cv.OPTFLOW_USE_INITIAL_FLOW uses initial estimations, stored in nextPts; if the flag is not set,
then prevPts is copied to nextPts and is considered the initial estimate.
- cv.OPTFLOW_LK_GET_MIN_EIGENVALS use minimum eigen values as an error measure (see minEigThreshold
description); if the flag is not set, then L1 distance between patches around the original and a moved
point, divided by number of pixels in a window, is used as a error measure.
@param minEigThreshold  the algorithm calculates the minimum eigen value of a 2x2 normal matrix of
optical flow equations, divided by number of pixels in a window; if this value is less than
minEigThreshold, then a corresponding feature is filtered out and its flow is not processed, so it
allows to remove bad points and get a performance boost.

### Try it

\htmlonly
<iframe src="../../js_optical_flow_lucas_kanade.html" width="100%"
        onload="this.style.height=this.contentDocument.body.scrollHeight +'px';">
</iframe>
\endhtmlonly

(This code doesn't check how correct are the next keypoints. So even if any feature point disappears
in image, there is a chance that optical flow finds the next point which may look close to it. So
actually for a robust tracking, corner points should be detected in particular intervals.)

Dense Optical Flow in OpenCV.js
-------------------------------

Lucas-Kanade method computes optical flow for a sparse feature set (in our example, corners detected
using Shi-Tomasi algorithm). OpenCV.js provides another algorithm to find the dense optical flow. It
computes the optical flow for all the points in the frame. It is based on Gunnar Farneback's
algorithm which is explained in "Two-Frame Motion Estimation Based on Polynomial Expansion" by
Gunnar Farneback in 2003.

We use the function: **cv.calcOpticalFlowFarneback (prev, next, flow, pyrScale, levels, winsize,
iterations, polyN, polySigma, flags)**
@param prev        first 8-bit single-channel input image.
@param next        second input image of the same size and the same type as prev.
@param flow        computed flow image that has the same size as prev and type CV_32FC2.
@param pyrScale    parameter, specifying the image scale (<1) to build pyramids for each image;
pyrScale=0.5 means a classical pyramid, where each next layer is twice smaller than the previous one.
@param levels      number of pyramid layers including the initial image; levels=1 means that no extra
layers are created and only the original images are used.
@param winsize     averaging window size; larger values increase the algorithm robustness to image noise
and give more chances for fast motion detection, but yield more blurred motion field.
@param iterations  number of iterations the algorithm does at each pyramid level.
@param polyN       size of the pixel neighborhood used to find polynomial expansion in each pixel; larger
values mean that the image will be approximated with smoother surfaces, yielding more robust algorithm
and more blurred motion field, typically polyN =5 or 7.
@param polySigma   standard deviation of the Gaussian that is used to smooth derivatives used as a
basis for the polynomial expansion; for polyN=5, you can set polySigma=1.1, for polyN=7, a good
value would be polySigma=1.5.
@param flags       operation flags that can be a combination of the following:
- cv.OPTFLOW_USE_INITIAL_FLOW uses the input flow as an initial flow approximation.
- cv.OPTFLOW_FARNEBACK_GAUSSIAN uses the Gaussian 𝚠𝚒𝚗𝚜𝚒𝚣𝚎×𝚠𝚒𝚗𝚜𝚒𝚣𝚎 filter instead of a box filter of
the same size for optical flow estimation; usually, this option gives z more accurate flow than with
a box filter, at the cost of lower speed; normally, winsize for a Gaussian window should be set to a
larger value to achieve the same level of robustness.

### Try it

\htmlonly
<iframe src="../../js_optical_flow_dense.html" width="100%"
        onload="this.style.height=this.contentDocument.body.scrollHeight +'px';">
</iframe>
\endhtmlonly