- 26 3月, 2019 8 次提交
-
-
由 Lisa Owen 提交于
* docs - gpexpand.status_detail external_writable field * gpexpand.status tbl - updated col now timestamp without tz
-
由 Lisa Owen 提交于
* docs - organize contrib modules in ref guide * provides * insignificant edit
-
由 Lisa Owen 提交于
* docs - new pxf parquet write options * add bytes * line edit: the PXF -> PXF * Line edit: which -> that
-
由 Lisa Owen 提交于
-
由 Lisa Owen 提交于
* docs - describe pxf jdbc profile QUOTE_COLUMNS option * clarify per comment from ivan
-
由 Chuck Litzell 提交于
* ALTER TABLE. Edits and fix example. * ALTER TYPE. Add IF NOT EXISTS and edits * ALTER VIEW. edits and add examples * clusterdb. small edit * CREATE EXTENSION. Edits mostly applied earlier. * CREATE FUNCTION. Compatibility edit. * CREATE RULE. Edits * EXPLAIN. small edits. * DROP RULE. minor edits * GRANT. revise server USAGE privilege description. * pg_restore. lots of edits. doesn't read PGDATABASE envvar. * REASSIGN OWNED. edits. Remove qualification that it doesn't change the database ownership * REASSIGN OWNED. edits. Remove qualification that it doesn't change the database ownership * Remove extraneous char * Changes from review
-
由 dyozie 提交于
-
由 Mark Sliva 提交于
Co-authored-by: NJamie McAtamney <jmcatamney@pivotal.io>
-
- 23 3月, 2019 3 次提交
-
-
由 Oliver Albertini 提交于
It's a Bourne Again script, Not a Bourne script. Co-authored-by: NSoumyadeep Chakraborty <sochakraborty@pivotal.io> Co-authored-by: NOliver Albertini <oalbertini@pivotal.io> Co-authored-by: NAmil Khanzada <akhanzada@pivotal.io> Co-authored-by: NKris Macoskey <kmacoskey@pivotal.io>
-
由 Oliver Albertini 提交于
The logic hasn't actually changed much (we are still validating the the postgres version and gpdb_src SHA match), but has become clearer and easier to follow: * avoids use of globals * separates assert function into two to have clearer scope separation Co-authored-by: NSoumyadeep Chakraborty <sochakraborty@pivotal.io> Co-authored-by: NAmil Khanzada <akhanzada@pivotal.io> Co-authored-by: NOliver Albertini <oalbertini@pivotal.io> Co-authored-by: NKris Macoskey <kmacoskey@pivotal.io> Co-authored-by: NBen Christel <bchristel@pivotal.io>
- 22 3月, 2019 5 次提交
-
-
由 Jialun 提交于
As a kill may be not taken effect at "the database is killed on hosts " immediately, so we double check the cluster and stop database if it is still running. But if kill takes effect after checking, stop_database will raise an exception for gpstop will fail to stop an unstarted cluster. To fix this flaky case, we stop database first and check the database status later. It will raise an exception only when gpstop failed and the cluster is still running.
-
由 Shoaib Lari 提交于
For some areas of the ICW test framework -- isolation2 in particular -- the additional data written to stdout by gprecoverseg's progress increased the load on the system significantly. (Some tests are buffering stdout without bound, for instance.) Additionally, the updates were coming at ten times a second, which is an order of magnitude more than the update interval we get from pg_basebackup itself. To help with this, we have have added a --no-progress flag that suppresses the output of pg_basebackup. We have also changed the pg_basebackup progress update rate to once per second to minimize I/O. The impacted regression/isolation2 tests utilizing gprecoverseg have also been modified to use the --no-progress flag. Co-authored-by: NJamie McAtamney <jmcatamney@pivotal.io> Co-authored-by: NJacob Champion <pchampion@pivotal.io>
-
由 Kalen Krempely 提交于
When -s is present, show pg_basebackup progress sequentially instead of inplace. Useful when writing to a file, or if a tty does not support escape sequences. Defaults to showing the progress inplace.
-
由 Shoaib Lari 提交于
The gprecoverseg utility runs pg_basebackup in parallel on all segments that are being recovered. In this commit, we are logging the progress of each pg_basebackup on its host and displaying them to the user of gprecoverseg. The progress files are deleted upons successful completion of gprecoverseg. Unit tests have also been added. Authored-by: NShoaib Lari <slari@pivotal.io> Co-authored-by: NMark Sliva <msliva@pivotal.io> Co-authored-by: NJacob Champion <pchampion@pivotal.io> Co-authored-by: NEd Espino <edespino@pivotal.io> Co-authored-by: NKalen Krempely <kkrempely@pivotal.io>
-
由 Bhuvnesh Chaudhary 提交于
-
- 21 3月, 2019 10 次提交
-
-
由 Ning Yu 提交于
These files used to be installed to ${prefix}/bin/ directory, but as they are not user documents we should not install them. Reviewed-by: NBradford D. Boyle <bboyle@pivotal.io> Reviewed-by: NBob Bao <bbao@pivotal.io>
-
由 Bradford Boyle 提交于
The fly commands outputted by gen_pipeline needed to be updated for a chance in the naming convention of one of the secrets files used. Co-authored-by: NBradford Boyle <bboyle@pivotal.io> Co-authored-by: NKris Macoskey <kmacoskey@pivotal.io>
-
由 dyozie 提交于
-
由 Mark Sliva 提交于
Include gpaddmirrors in the distribution. Co-authored-by: NKalen Krempely <kkrempely@pivotal.io> Co-authored-by: NMark Sliva <msliva@pivotal.io>
-
由 Chris Hajas 提交于
Corresponding ORCA commit: "Fix crash during expression to DXL translation in correlated NLJ"
-
由 Jamie McAtamney 提交于
We add gpmovemirrors tests and add them to the pipeline as well. Using behave tags, some of the tests can run locally on a demo cluster. We also introduce Behave tag logic to choose which tests to run. <Co-Authored-By> Kalen Krempely <kkrempely@pivotal.io> <Co-Authored-By> Mark Sliva <msliva@pivotal.io>
-
由 Taylor Vesely 提交于
This seems to have broken when we updated gprecoverseg to work with WAL rep.
-
由 Mark Sliva 提交于
We removed the registerMirrorsInCatalog method from the cluster-wide utilities. Co-authored-by: NShoaib Lari <slari@pivotal.io>
-
由 Jacob Champion 提交于
Because set_next_rotation_time() was being called once per call to logfile_rotate(), the timestamp used to create the log file name was being advanced multiple times per rotation. This led to the creation of empty log files on disk that looked like they were from "the future". This code badly needs to be refactored -- the initial intent, for the text and csv implementations to be independent, is no longer the case -- but for now, we can hack around this problem by pulling the call to set_next_rotation_time() up one level. This will only be called if *all* logfiles are correctly rotated, to match the upstream logic (on failure, we loop around to the beginning and try to open all log files again). Co-authored-by: NJamie McAtamney <jmcatamney@pivotal.io>
-
由 Jacob Champion 提交于
Log rotations were happening well after the timestamp on the log file (e.g. a per-minute rotation might actually take place thirty seconds after it was supposed to). After the 9.2 merge, we were incorrectly shadowing the `now` variable, so the rotation delay only got bigger and bigger. Periodic logging (such as from FTS) caused us to break out of the wait by luck, but otherwise the syslogger would take longer and longer to wake up to perform a rotation. Co-authored-by: NJamie McAtamney <jmcatamney@pivotal.io>
-
- 20 3月, 2019 3 次提交
-
-
由 Tingfang Bao 提交于
tracker story here: https://www.pivotaltracker.com/story/show/162139588 When we compile the gpdb, we observer a error in the stdout: Error Copying Documentation: /root/gpdb/gpAux/docs/release is not present We sent a email to confirm with gpdb dev about this issue. and got the reply is to remove it completely. Authored-by: NBob Bao <bbao@pivotal.io>
-
由 Wang Hao 提交于
For GP 6 beta, the release engineering team is removing the apr-util package from the list of bundled dependencies. Users will be asked to provide their own apr-util package, which can differ in the version on each platform. So it is necessary to verify gpperfmon is workable with the platform provided apr-util on each supported platform. Originally, gpperfmon test is done in CLI test suite, only covers centos6. This commit changed it to a dedicated suite in order to test multiple platforms. Note: on SLES12 does not need to install libapr-util1 to run gpmmon
-
由 Kris Macoskey 提交于
With the creation of 6X_STABLE, the pipelines creating artifacts from the master branch need to separate from 6X_STABLE in blob store Authored-by: NKris Macoskey <kmacoskey@pivotal.io>
-
- 19 3月, 2019 6 次提交
-
-
由 Hao Wu 提交于
Gp_role is asserted to GP_ROLE_DISPATCH
-
由 Ashwin Agrawal 提交于
In some scenarios ERROR "append-only table version -1 is invalid" is being hit. Code inspection doens't reveal any clues why it can happen. So, for now we thought of adding more info to figure out the cause. Backtrace would definitely be helpful when the error hits. Also, check the format version as soon as entry is read from catalog. Plus also would be greatly helpful if can have corefile when the problem happens so under the controlled environment with guc evelate ERROR to PANIC. GUC `debug_appendonly_print_verify_write_block` usage for same is not ideal but wish to avoid adding special guc just for this case, hence piggyback on this existing uinteresting debug guc for now. Co-authored-by: NDaniel Gustafsson <dgustafsson@pivotal.io>
-
由 Lisa Owen 提交于
* dblink - xref to postgres 9.4 docs * docs - add some using and writing your own FDW info * add quote missing from mpp_execute master option * foreign dash data, misc edits
-
由 Bradford Boyle 提交于
ci: remove `-oss` from pattern used to parse version output
-
由 Kalen Krempely 提交于
Remove period from assertRaisesRegexp expectation to not be conflated with the regex metacharacter. Authored-by: NKalen Krempely <kkrempely@pivotal.io>
-
由 Chuck Litzell 提交于
* gpexpand - remove `-D` flag and specify expansion schema is created in postgres database - Add gpstate -x flag * From review: consistent formatting for gpexpand and postgres * Edit from review
-
- 18 3月, 2019 4 次提交
-
-
由 Larry Hamel 提交于
* README mentions how gpupgrade and gpbackup both use the database "regression" that remains after an ICW run in the directory "regress". Authored-by: NLarry Hamel <lhamel@pivotal.io>
-
由 Jialun 提交于
- get port from MASTER_DATA_DIRECTORY, so there is no confusion if PGPORT and MASTER_DATA_DIRECTORY are set to different clusters - delete tmp status file 'gpexpand.standby.status' and copy the status file to standby directly - get standby data directory from catalog instead of assuming its same with master - copy gp_segment_configuration backup file to standby also, so standby can restore this catalog if master is down
-
由 Paul Guo 提交于
Previously we added the code due to Coverity report, however, we conclude that we should better align with upstream after some further discussion. See below. https://github.com/greenplum-db/gpdb/pull/7120 In the long run, we hope StrNCpy() is gone, by the way. Reviewed-by: NDaniel Gustafsson <dgustafsson@pivotal.io>
-
由 Ning Yu 提交于
FirstNormalObjectId indicates the first OID for user objects, if a relation's oid >= FirstNormalObjectId then it's an user object, otherwise it's a catalog object. Fixed some incorrect uses of it, they treated oid == FirstNormalObjectId as catalog objects. Discussion: https://groups.google.com/a/greenplum.org/d/msg/gpdb-dev/ZHy-x1DaoXE/ceyzZ4TuCgAJReviewed-by: NDaniel Gustafsson <dgustafsson@pivotal.io> Reviewed-by: NJimmy Yih <jyih@pivotal.io> Reviewed-by: NGeorgios Kokolatos <gkokolatos@pivotal.io>
-
- 16 3月, 2019 1 次提交
-
-
由 Kris Macoskey 提交于
Authored-by: NKris Macoskey <kmacoskey@pivotal.io>
-