Skip to content

G
Gpdb

Greenplum / Gpdb

通知 7
Star 1
Fork 0
G
Gpdb

体验新版 GitCode，发现更多精彩内容 >>

提交 ae28cfe6 编写于 作者: T Tom Lane
浏览文件
操作

Partial fix for ecpg's VPATH problems. It compiles and successfully 

builds all the files needed for its regression tests, but the tests
themselves fail because of diffs in the #line directives output by
ecpg itself.  Not sure what to do about that.
上级 fcba3b82
隐藏空白更改
内联 并排
Showing with 666 addition and 641 deletion
src/interfaces/ecpg/compatlib/Makefile
浏览文件 @ ae28cfe6
......@@ -4,7 +4,7 @@
#
# Copyright (c) 1994, Regents of the University of California
#
# $PostgreSQL: pgsql/src/interfaces/ecpg/compatlib/Makefile,v 1.23 2005/12/09 21:19:35 petere Exp $
# $PostgreSQL: pgsql/src/interfaces/ecpg/compatlib/Makefile,v 1.24 2006/08/28 16:13:10 tgl Exp $
#
#-------------------------------------------------------------------------
......@@ -17,11 +17,12 @@ SO_MAJOR_VERSION= 2
SO_MINOR_VERSION= 2
DLTYPE= library
override CPPFLAGS := -I$(top_srcdir)/src/interfaces/ecpg/include -I$(libpq_srcdir) \
-I$(top_srcdir)/src/include/utils $(CPPFLAGS)
override CPPFLAGS := -I../include -I$(top_srcdir)/src/interfaces/ecpg/include \
-I$(libpq_srcdir) -I$(top_srcdir)/src/include/utils $(CPPFLAGS)
override CFLAGS += $(PTHREAD_CFLAGS)
SHLIB_LINK = -L../ecpglib -lecpg -L../pgtypeslib -lpgtypes $(libpq) \
$(filter -lintl -lssl -lcrypto -lkrb5 -lcrypt -lm, $(LIBS)) $(PTHREAD_LIBS)
$(filter -lintl -lssl -lcrypto -lkrb5 -lcrypt -lm, $(LIBS)) \
$(PTHREAD_LIBS)
OBJS= informix.o
......
src/interfaces/ecpg/ecpglib/Makefile
浏览文件 @ ae28cfe6
......@@ -4,7 +4,7 @@
#
# Copyright (c) 1994, Regents of the University of California
#
# $PostgreSQL: pgsql/src/interfaces/ecpg/ecpglib/Makefile,v 1.40 2006/04/29 20:13:07 tgl Exp $
# $PostgreSQL: pgsql/src/interfaces/ecpg/ecpglib/Makefile,v 1.41 2006/08/28 16:13:11 tgl Exp $
#
#-------------------------------------------------------------------------
......@@ -17,7 +17,8 @@ SO_MAJOR_VERSION= 5
SO_MINOR_VERSION= 2
DLTYPE= library
override CPPFLAGS := -DFRONTEND -I$(top_srcdir)/src/interfaces/ecpg/include \
override CPPFLAGS := -DFRONTEND \
-I../include -I$(top_srcdir)/src/interfaces/ecpg/include \
-I$(libpq_srcdir) -I$(top_builddir)/src/port $(CPPFLAGS)
override CFLAGS += $(PTHREAD_CFLAGS)
......
src/interfaces/ecpg/include/Makefile
浏览文件 @ ae28cfe6
......@@ -2,7 +2,8 @@ subdir = src/interfaces/ecpg/include
top_builddir = ../../../..
include $(top_builddir)/src/Makefile.global
override CPPFLAGS := -DFRONTEND -I$(top_srcdir)/src/interfaces/ecpg/include \
override CPPFLAGS := -DFRONTEND \
-I../include -I$(top_srcdir)/src/interfaces/ecpg/include \
-I$(libpq_srcdir) -I$(top_builddir)/src/port $(CPPFLAGS)
informix_esql_dir = $(pkgincludedir)/informix/esql
......
src/interfaces/ecpg/pgtypeslib/Makefile
浏览文件 @ ae28cfe6
......@@ -4,7 +4,7 @@
#
# Copyright (c) 1994, Regents of the University of California
#
# $PostgreSQL: pgsql/src/interfaces/ecpg/pgtypeslib/Makefile,v 1.29 2005/12/09 21:19:36 petere Exp $
# $PostgreSQL: pgsql/src/interfaces/ecpg/pgtypeslib/Makefile,v 1.30 2006/08/28 16:13:11 tgl Exp $
#
#-------------------------------------------------------------------------
......@@ -17,7 +17,8 @@ SO_MAJOR_VERSION= 2
SO_MINOR_VERSION= 2
DLTYPE= library
override CPPFLAGS := -DFRONTEND -I$(top_srcdir)/src/interfaces/ecpg/include \
override CPPFLAGS := -DFRONTEND \
-I../include -I$(top_srcdir)/src/interfaces/ecpg/include \
-I$(top_srcdir)/src/include/utils -I$(libpq_srcdir) $(CPPFLAGS)
override CFLAGS += $(PTHREAD_CFLAGS)
......
src/interfaces/ecpg/preproc/Makefile
浏览文件 @ ae28cfe6
......@@ -4,7 +4,7 @@
#
# Copyright (c) 1998-2006, PostgreSQL Global Development Group
#
# $PostgreSQL: pgsql/src/interfaces/ecpg/preproc/Makefile,v 1.120 2006/03/07 00:48:07 tgl Exp $
# $PostgreSQL: pgsql/src/interfaces/ecpg/preproc/Makefile,v 1.121 2006/08/28 16:13:11 tgl Exp $
#
#-------------------------------------------------------------------------
......@@ -17,9 +17,10 @@ MAJOR_VERSION= 4
MINOR_VERSION= 2
PATCHLEVEL=1
override CPPFLAGS := -I$(srcdir)/../include -I$(srcdir) $(CPPFLAGS) \
-DMAJOR_VERSION=$(MAJOR_VERSION) \
-DMINOR_VERSION=$(MINOR_VERSION) -DPATCHLEVEL=$(PATCHLEVEL)
override CPPFLAGS := -I../include -I$(top_srcdir)/src/interfaces/ecpg/include \
-I$(srcdir) -DMAJOR_VERSION=$(MAJOR_VERSION) \
-DMINOR_VERSION=$(MINOR_VERSION) -DPATCHLEVEL=$(PATCHLEVEL) \
$(CPPFLAGS)
ifeq ($(GCC), yes)
override CFLAGS += -Wno-error
......
src/interfaces/ecpg/test/Makefile
浏览文件 @ ae28cfe6
# $PostgreSQL: pgsql/src/interfaces/ecpg/test/Makefile,v 1.58 2006/08/19 13:42:40 meskes Exp $
# $PostgreSQL: pgsql/src/interfaces/ecpg/test/Makefile,v 1.59 2006/08/28 16:13:11 tgl Exp $
subdir = src/interfaces/ecpg/test
top_builddir = ../../../..
......@@ -17,6 +17,12 @@ ifdef NO_LOCALE
NOLOCALE += --no-locale
endif
ifneq ($(PORTNAME),win32)
abs_builddir := $(shell pwd)
else
abs_builddir := $(shell pwd -W)
endif
all install installdirs uninstall dep depend distprep:
$(MAKE) -C connect $@
$(MAKE) -C sql $@
......@@ -36,13 +42,11 @@ clean distclean maintainer-clean:
$(MAKE) -C complex $@
$(MAKE) -C thread $@
rm -rf tmp_check results log
rm -f pg_regress.inc.sh regression.diffs
rm -f pg_regress regression.diffs
all: pg_regress.sh
all: pg_regress
pg_regress.sh: pg_regress.inc.sh
pg_regress.inc.sh: pg_regress.inc.sh.in $(top_builddir)/src/Makefile.global
pg_regress: pg_regress.sh $(top_builddir)/src/Makefile.global
sed -e 's,@bindir@,$(bindir),g' \
-e 's,@libdir@,$(libdir),g' \
-e 's,@pkglibdir@,$(pkglibdir),g' \
......@@ -54,12 +58,29 @@ pg_regress.inc.sh: pg_regress.inc.sh.in $(top_builddir)/src/Makefile.global
-e 's/@GCC@/$(GCC)/g' \
$< >$@
check: all pg_regress.inc.sh
sh ./pg_regress.sh --dbname=regress1 --debug --temp-install --top-builddir=$(top_builddir) --temp-port=$(TEMP_PORT) --multibyte=$(MULTIBYTE) --load-language=plpgsql $(NOLOCALE)
# When doing a VPATH build, copy over the .pgc, .stdout and .stderr
# files so that the driver script can find them. We have to use an
# absolute path for the targets, because otherwise make will try to
# locate the missing files using VPATH, and will find them in
# $(srcdir), but the point here is that we want to copy them from
# $(srcdir) to the build directory.
ifdef VPATH
remaining_files_src := $(wildcard $(srcdir)/*/*.pgc) $(wildcard $(srcdir)/expected/*.c) $(wildcard $(srcdir)/expected/*.stdout) $(wildcard $(srcdir)/expected/*.stderr)
remaining_files_build := $(patsubst $(srcdir)/%, $(abs_builddir)/%, $(remaining_files_src))
all: $(remaining_files_build)
$(remaining_files_build): $(abs_builddir)/%: $(srcdir)/%
ln -s $< $@
endif
check: all
sh ./pg_regress --dbname=regress1 --debug --temp-install --top-builddir=$(top_builddir) --temp-port=$(TEMP_PORT) --multibyte=$(MULTIBYTE) --load-language=plpgsql $(NOLOCALE)
# the same options, but with --listen-on-tcp
checktcp: all pg_regress.inc.sh
sh ./pg_regress.sh --dbname=regress1 --debug --temp-install --top-builddir=$(top_builddir) --temp-port=$(TEMP_PORT) --multibyte=$(MULTIBYTE) --load-language=plpgsql $(NOLOCALE) --listen-on-tcp
checktcp: all
sh ./pg_regress --dbname=regress1 --debug --temp-install --top-builddir=$(top_builddir) --temp-port=$(TEMP_PORT) --multibyte=$(MULTIBYTE) --load-language=plpgsql $(NOLOCALE) --listen-on-tcp
installcheck: all pg_regress.inc.sh
sh ./pg_regress.sh --dbname=regress1 --debug --top-builddir=$(top_builddir) --load-language=plpgsql $(NOLOCALE)
installcheck: all
sh ./pg_regress --dbname=regress1 --debug --top-builddir=$(top_builddir) --load-language=plpgsql $(NOLOCALE)
src/interfaces/ecpg/test/Makefile.regress
浏览文件 @ ae28cfe6
override CPPFLAGS := -I$(srcdir)/../../include -I$(libpq_srcdir) $(CPPFLAGS)
override CPPFLAGS := -I../../include -I$(top_srcdir)/src/interfaces/ecpg/include \
-I$(libpq_srcdir) $(CPPFLAGS)
override CFLAGS += $(PTHREAD_CFLAGS)
override LDFLAGS := -L../../ecpglib -L../../pgtypeslib -L../../../libpq $(LDFLAGS)
......
src/interfaces/ecpg/test/pg_regress.inc.sh.in 已删除 100644 → 0
浏览文件 @ fcba3b82
message(){
_dashes='==============' # 14
_spaces=' ' # 38
_msg=`echo "$1$_spaces" | cut -c 1-38`
echo "$_dashes $_msg $_dashes"
}
build_help(){
help="\
PostgreSQL regression test driver
Usage: $me [options...] [extra tests...]
Options:
--dbname=DB use database DB (default \`regression')
--debug turn on debug mode in programs that are run
--inputdir=DIR take input files from DIR (default \`.')
--load-language=lang load the named language before running the
tests; can appear multiple times
--max-connections=N maximum number of concurrent connections
(default is 0 meaning unlimited)
--multibyte=ENCODING use ENCODING as the multibyte encoding, and
also run a test by the same name
--outputdir=DIR place output files in DIR (default \`.')
--temp-install[=DIR] create a temporary installation (in DIR)
--no-locale use C locale
$1
Options for \`temp-install' mode:
--top-builddir=DIR (relative) path to top level build directory
--temp-port=PORT port number to start temp postmaster on
--listen-on-tcp listen on the tcp port as well
Options for using an existing installation:
--host=HOST use postmaster running on HOST
--port=PORT use postmaster running at PORT
--user=USER connect as USER
The exit status is 0 if all tests passed, 1 if some tests failed, and 2
if the tests could not be run for some reason.
Report bugs to <pgsql-bugs@postgresql.org>."
}
init_vars(){
: ${TMPDIR=/tmp}
TMPFILE=$TMPDIR/pg_regress.$$
# ----------
# Initialize default settings
# ----------
: ${inputdir=.}
: ${outputdir=.}
libdir='@libdir@'
bindir='@bindir@'
datadir='@datadir@'
host_platform='@host_tuple@'
enable_shared='@enable_shared@'
GCC=@GCC@
VERSION=@VERSION@
if [ "$GCC" = yes ]; then
compiler=gcc
else
compiler=cc
fi
unset mode
unset schedule
unset debug
unset nolocale
unset top_builddir
unset temp_install
unset multibyte
dbname=regression
hostname=localhost
maxconnections=0
temp_port=65432
load_langs=""
listen_on_tcp=no
: ${GMAKE='@GMAKE@'}
}
parse_general_options(){
# ----------
# Parse command line options
# ----------
while [ "$#" -gt 0 ]
do
case $1 in
--help|-\?)
echo "$help"
exit 0;;
--version)
echo "pg_regress (PostgreSQL $VERSION)"
exit 0;;
--dbname=*)
dbname=`expr "x$1" : "x--dbname=\(.*\)"`
shift;;
--debug)
debug=yes
shift;;
--inputdir=*)
inputdir=`expr "x$1" : "x--inputdir=\(.*\)"`
shift;;
--listen-on-tcp)
listen_on_tcp=yes
shift;;
--load-language=*)
lang=`expr "x$1" : "x--load-language=\(.*\)"`
load_langs="$load_langs $lang"
unset lang
shift;;
--multibyte=*)
multibyte=`expr "x$1" : "x--multibyte=\(.*\)"`
shift;;
--no-locale)
nolocale=yes
shift;;
--temp-install)
temp_install=./tmp_check
shift;;
--temp-install=*)
temp_install=`expr "x$1" : "x--temp-install=\(.*\)"`
shift;;
--max-connections=*)
maxconnections=`expr "x$1" : "x--max-connections=\(.*\)"`
shift;;
--outputdir=*)
outputdir=`expr "x$1" : "x--outputdir=\(.*\)"`
shift;;
--top-builddir=*)
top_builddir=`expr "x$1" : "x--top-builddir=\(.*\)"`
shift;;
--temp-port=*)
temp_port=`expr "x$1" : "x--temp-port=\(.*\)"`
shift;;
--host=*)
PGHOST=`expr "x$1" : "x--host=\(.*\)"`
export PGHOST
unset PGHOSTADDR
shift;;
--port=*)
PGPORT=`expr "x$1" : "x--port=\(.*\)"`
export PGPORT
shift;;
--user=*)
PGUSER=`expr "x$1" : "x--user=\(.*\)"`
export PGUSER
shift;;
-*)
# on error, this will not return but exit
parse_special_options "$1"
shift;;
*)
extra_tests="$extra_tests $1"
shift;;
esac
done
}
setup_environment_variables(){
# This function has two parts. Part 1 sets/unsets environment variables
# independently of what options the script receives.
# Part 2 later sets environment variables with respect to the
# options given.
# =======
# PART 1: Options independent stuff goes here
# =======
# ----------
# Unset locale settings
# ----------
unset LC_COLLATE LC_CTYPE LC_MONETARY LC_MESSAGES LC_NUMERIC LC_TIME LC_ALL LANG LANGUAGE
# On Windows the default locale may not be English, so force it
case $host_platform in
*-*-cygwin*|*-*-mingw32*)
LANG=en
export LANG
;;
esac
# ----------
# On some platforms we can't use Unix sockets.
# ----------
case $host_platform in
*-*-cygwin* | *-*-mingw32*)
listen_on_tcp=yes
esac
# ----------
# Set up diff to ignore horizontal white space differences.
# ----------
case $host_platform in
*-*-sco3.2v5*)
DIFFFLAGS=-b;;
*)
DIFFFLAGS=-w;;
esac
# ----------
# Check for echo -n vs echo \c
# ----------
if echo '\c' | grep c >/dev/null 2>&1; then
ECHO_N='echo -n'
ECHO_C=''
else
ECHO_N='echo'
ECHO_C='\c'
fi
# ----------
# Set backend timezone and datestyle explicitly
#
# To pass the horology test in its current form, the postmaster must be
# started with PGDATESTYLE=ISO, while the frontend must be started with
# PGDATESTYLE=Postgres. We set the postmaster values here and change
# to the frontend settings after the postmaster has been started.
# ----------
PGTZ='PST8PDT'; export PGTZ
PGDATESTYLE='ISO, MDY'; export PGDATESTYLE
# ----------
# Set up SQL shell for the test.
# ----------
psql_test_options="-a -q -X $psql_options"
# =======
# PART 2: Options dependent stuff goes here
# =======
LOGDIR=$outputdir/log
# ----------
# warn of Cygwin likely failure if maxconnections = 0
# and we are running parallel tests
# ----------
case $host_platform in
*-*-cygwin*)
case "$schedule" in
*parallel_schedule*)
if [ $maxconnections -eq 0 ] ; then
echo Using unlimited parallel connections is likely to fail or hang on Cygwin.
echo Try \"$me --max-connections=n\" or \"gmake MAX_CONNECTIONS=n check\"
echo with n = 5 or 10 if this happens.
echo
fi
;;
esac
;;
esac
# ----------
# Set up multibyte environment
# ----------
if [ -n "$multibyte" ]; then
PGCLIENTENCODING=$multibyte
export PGCLIENTENCODING
encoding_opt="-E $multibyte"
else
unset PGCLIENTENCODING
fi
}
do_temp_install(){
if echo x"$temp_install" | grep -v '^x/' >/dev/null 2>&1; then
temp_install="`pwd`/$temp_install"
fi
bindir=$temp_install/install/$bindir
libdir=$temp_install/install/$libdir
datadir=$temp_install/install/$datadir
PGDATA=$temp_install/data
if [ "$unix_sockets" = no ]; then
PGHOST=$hostname
export PGHOST
unset PGHOSTADDR
else
unset PGHOST
unset PGHOSTADDR
fi
# since Makefile isn't very bright, check for out-of-range temp_port
if [ "$temp_port" -ge 1024 -a "$temp_port" -le 65535 ] ; then
PGPORT=$temp_port
else
PGPORT=65432
fi
export PGPORT
# Get rid of environment stuff that might cause psql to misbehave
# while contacting our temp installation
unset PGDATABASE PGUSER PGSERVICE PGSSLMODE PGREQUIRESSL PGCONNECT_TIMEOUT
# ----------
# Set up shared library paths, needed by psql and pg_encoding
# (if you run multibyte). LD_LIBRARY_PATH covers many platforms.
# DYLD_LIBRARY_PATH works on Darwin, and maybe other Mach-based systems.
# Feel free to account for others as well.
# ----------
if [ -n "$LD_LIBRARY_PATH" ]; then
LD_LIBRARY_PATH="$libdir:$LD_LIBRARY_PATH"
else
LD_LIBRARY_PATH=$libdir
fi
export LD_LIBRARY_PATH
if [ -n "$DYLD_LIBRARY_PATH" ]; then
DYLD_LIBRARY_PATH="$libdir:$DYLD_LIBRARY_PATH"
else
DYLD_LIBRARY_PATH=$libdir
fi
export DYLD_LIBRARY_PATH
# ----------
# Windows needs shared libraries in PATH. (Only those linked into
# executables, not dlopen'ed ones)
# ----------
case $host_platform in
*-*-cygwin*|*-*-mingw32*)
PATH=$libdir:$PATH
export PATH
;;
esac
if [ -d "$temp_install" ]; then
message "removing existing temp installation"
rm -rf "$temp_install"
fi
message "creating temporary installation"
if [ ! -d "$LOGDIR" ]; then
mkdir -p "$LOGDIR" || { (exit 2); exit; }
fi
$GMAKE -C "$top_builddir" DESTDIR="$temp_install/install" install with_perl=no with_python=no >"$LOGDIR/install.log" 2>&1
if [ $? -ne 0 ]
then
echo
echo "$me: installation failed"
echo "Examine $LOGDIR/install.log for the reason."
echo
(exit 2); exit
fi
message "initializing database system"
[ "$debug" = yes ] && initdb_options="--debug"
[ "$nolocale" = yes ] && initdb_options="$initdb_options --no-locale"
"$bindir/initdb" -D "$PGDATA" -L "$datadir" --noclean $initdb_options >"$LOGDIR/initdb.log" 2>&1
if [ $? -ne 0 ]
then
echo
echo "$me: initdb failed"
echo "Examine $LOGDIR/initdb.log for the reason."
echo
(exit 2); exit
fi
# ----------
# Start postmaster
# ----------
message "starting postmaster"
[ "$debug" = yes ] && postmaster_options="$postmaster_options -d 5"
if [ "$listen_on_tcp" = yes ]; then
postmaster_options="$postmaster_options -c listen_addresses=$hostname"
else
postmaster_options="$postmaster_options -c listen_addresses="
fi
"$bindir/postmaster" -D "$PGDATA" -F $postmaster_options >"$LOGDIR/postmaster.log" 2>&1 &
postmaster_pid=$!
# Wait till postmaster is able to accept connections (normally only
# a second or so, but Cygwin is reportedly *much* slower). Don't
# wait forever, however.
i=0
max=60
until "$bindir/psql" -X $psql_options postgres </dev/null 2>/dev/null
do
i=`expr $i + 1`
if [ $i -ge $max ]
then
break
fi
if kill -0 $postmaster_pid >/dev/null 2>&1
then
: still starting up
else
break
fi
sleep 1
done
if kill -0 $postmaster_pid >/dev/null 2>&1
then
echo "running on port $PGPORT with pid $postmaster_pid"
else
echo
echo "$me: postmaster did not start"
echo "Examine $LOGDIR/postmaster.log for the reason."
echo
(exit 2); exit
fi
}
dont_temp_install(){
# ----------
# Windows needs shared libraries in PATH. (Only those linked into
# executables, not dlopen'ed ones)
# ----------
case $host_platform in
*-*-cygwin*|*-*-mingw32*)
PATH=$libdir:$PATH
export PATH
;;
esac
if [ -n "$PGPORT" ]; then
port_info="port $PGPORT"
else
port_info="default port"
fi
if [ -n "$PGHOST" ]; then
echo "(using postmaster on $PGHOST, $port_info)"
else
if [ "$unix_sockets" = no ]; then
echo "(using postmaster on localhost, $port_info)"
else
echo "(using postmaster on Unix socket, $port_info)"
fi
fi
}
setup_client_environment_variables(){
PGDATESTYLE='Postgres'
export PGDATESTYLE
}
# ----------
# Exit trap to remove temp file and shut down postmaster
# ----------
# Note: There are some stupid shells (even among recent ones) that
# ignore the argument to exit (as in `exit 1') if there is an exit
# trap. The trap (and thus the shell script) will then always exit
# with the result of the last shell command before the `exit'. Hence
# we have to write `(exit x); exit' below this point.
exit_trap(){
savestatus=$1
if [ -n "$postmaster_pid" ]; then
kill -2 "$postmaster_pid"
wait "$postmaster_pid"
unset postmaster_pid
fi
rm -f "$TMPFILE" && exit $savestatus
}
sig_trap() {
savestatus=$1
echo; echo "caught signal"
if [ -n "$postmaster_pid" ]; then
echo "signalling fast shutdown to postmaster with pid $postmaster_pid"
kill -2 "$postmaster_pid"
wait "$postmaster_pid"
unset postmaster_pid
fi
(exit $savestatus); exit
}
setup_database(){
# this receives the name of the database to set up as its argument
"$bindir/psql" -q -X $psql_options -c "\
alter database \"$1\" set lc_messages to 'C';
alter database \"$1\" set lc_monetary to 'C';
alter database \"$1\" set lc_numeric to 'C';
alter database \"$1\" set lc_time to 'C';" "$1"
if [ $? -ne 0 ]; then
echo "$me: could not set database default locales"
(exit 2); exit
fi
# ----------
# Install any requested PL languages
# ----------
if [ "$enable_shared" = yes ]; then
for lang in xyzzy $load_langs ; do
if [ "$lang" != "xyzzy" ]; then
message "installing $lang"
"$bindir/createlang" $psql_options $lang "$1"
if [ $? -ne 0 ] && [ $? -ne 2 ]; then
echo "$me: createlang $lang failed"
(exit 2); exit
fi
fi
done
fi
}
drop_database(){
message "dropping database \"$1\""
"$bindir/dropdb" $psql_options "$1"
}
create_database(){
# ----------
# We use template0 so that any installation-local cruft in template1
# will not mess up the tests.
# ----------
message "creating database \"$1\""
"$bindir/createdb" $encoding_opt $psql_options --template template0 "$1"
if [ $? -ne 0 ]; then
echo "$me: createdb failed"
(exit 2); exit
fi
setup_database "$1"
}
database_cleanup(){
# ----------
# Remove regressuser* and regressgroup* user accounts.
# ----------
message "dropping regression test user accounts"
"$bindir/psql" -q -X $psql_options -c 'DROP GROUP regressgroup1; DROP GROUP regressgroup2; DROP USER regressuser1, regressuser2, regressuser3, regressuser4;' $dbname 2>/dev/null
if [ $? -eq 2 ]; then
echo "$me: could not drop user accounts"
(exit 2); exit
fi
}
postmaster_shutdown(){
# ----------
# Server shutdown
# ----------
if [ -n "$postmaster_pid" ]; then
message "shutting down postmaster"
"$bindir/pg_ctl" -s -D "$PGDATA" stop
wait "$postmaster_pid"
unset postmaster_pid
fi
}
evaluate(){
# ----------
# Evaluation
# ----------
count_total=`cat "$result_summary_file" | grep '\.\.\.' | wc -l | sed 's/ //g'`
count_ok=`cat "$result_summary_file" | grep '\.\.\. ok' | wc -l | sed 's/ //g'`
count_failed=`cat "$result_summary_file" | grep '\.\.\. FAILED' | wc -l | sed 's/ //g'`
count_ignored=`cat "$result_summary_file" | grep '\.\.\. failed (ignored)' | wc -l | sed 's/ //g'`
echo
if [ $count_total -eq $count_ok ]; then
msg="All $count_total tests passed."
result=0
elif [ $count_failed -eq 0 ]; then
msg="$count_ok of $count_total tests passed, $count_ignored failed test(s) ignored."
result=0
elif [ $count_ignored -eq 0 ]; then
msg="$count_failed of $count_total tests failed."
result=1
else
msg="`expr $count_failed + $count_ignored` of $count_total tests failed, $count_ignored of these failures ignored."
result=1
fi
dashes=`echo " $msg " | sed 's/./=/g'`
echo "$dashes"
echo " $msg "
echo "$dashes"
echo
if [ -s "$diff_file" ]; then
echo "The differences that caused some tests to fail can be viewed in the"
echo "file \`$diff_file'. A copy of the test summary that you see"
echo "above is saved in the file \`$result_summary_file'."
echo
else
rm -f "$diff_file" "$result_summary_file"
fi
}
src/interfaces/ecpg/test/pg_regress.sh
浏览文件 @ ae28cfe6
#! /bin/sh
# $PostgreSQL: pgsql/src/interfaces/ecpg/test/pg_regress.sh,v 1.6 2006/08/19 13:42:40 meskes Exp $
# $PostgreSQL: pgsql/src/interfaces/ecpg/test/pg_regress.sh,v 1.7 2006/08/28 16:13:11 tgl Exp $
me=`basename $0`
. ./pg_regress.inc.sh
message(){
_dashes='==============' # 14
_spaces=' ' # 38
_msg=`echo "$1$_spaces" | cut -c 1-38`
echo "$_dashes $_msg $_dashes"
}
build_help(){
help="\
PostgreSQL regression test driver
Usage: $me [options...] [extra tests...]
Options:
--dbname=DB use database DB (default \`regression')
--debug turn on debug mode in programs that are run
--inputdir=DIR take input files from DIR (default \`.')
--load-language=lang load the named language before running the
tests; can appear multiple times
--max-connections=N maximum number of concurrent connections
(default is 0 meaning unlimited)
--multibyte=ENCODING use ENCODING as the multibyte encoding, and
also run a test by the same name
--outputdir=DIR place output files in DIR (default \`.')
--temp-install[=DIR] create a temporary installation (in DIR)
--no-locale use C locale
$1
Options for \`temp-install' mode:
--top-builddir=DIR (relative) path to top level build directory
--temp-port=PORT port number to start temp postmaster on
--listen-on-tcp listen on the tcp port as well
Options for using an existing installation:
--host=HOST use postmaster running on HOST
--port=PORT use postmaster running at PORT
--user=USER connect as USER
The exit status is 0 if all tests passed, 1 if some tests failed, and 2
if the tests could not be run for some reason.
Report bugs to <pgsql-bugs@postgresql.org>."
}
init_vars(){
: ${TMPDIR=/tmp}
TMPFILE=$TMPDIR/pg_regress.$$
# ----------
# Initialize default settings
# ----------
: ${inputdir=.}
: ${outputdir=.}
libdir='@libdir@'
bindir='@bindir@'
datadir='@datadir@'
host_platform='@host_tuple@'
enable_shared='@enable_shared@'
GCC=@GCC@
VERSION=@VERSION@
if [ "$GCC" = yes ]; then
compiler=gcc
else
compiler=cc
fi
unset mode
unset schedule
unset debug
unset nolocale
unset top_builddir
unset temp_install
unset multibyte
dbname=regression
hostname=localhost
maxconnections=0
temp_port=65432
load_langs=""
listen_on_tcp=no
: ${GMAKE='@GMAKE@'}
}
parse_general_options(){
# ----------
# Parse command line options
# ----------
while [ "$#" -gt 0 ]
do
case $1 in
--help|-\?)
echo "$help"
exit 0;;
--version)
echo "pg_regress (PostgreSQL $VERSION)"
exit 0;;
--dbname=*)
dbname=`expr "x$1" : "x--dbname=\(.*\)"`
shift;;
--debug)
debug=yes
shift;;
--inputdir=*)
inputdir=`expr "x$1" : "x--inputdir=\(.*\)"`
shift;;
--listen-on-tcp)
listen_on_tcp=yes
shift;;
--load-language=*)
lang=`expr "x$1" : "x--load-language=\(.*\)"`
load_langs="$load_langs $lang"
unset lang
shift;;
--multibyte=*)
multibyte=`expr "x$1" : "x--multibyte=\(.*\)"`
shift;;
--no-locale)
nolocale=yes
shift;;
--temp-install)
temp_install=./tmp_check
shift;;
--temp-install=*)
temp_install=`expr "x$1" : "x--temp-install=\(.*\)"`
shift;;
--max-connections=*)
maxconnections=`expr "x$1" : "x--max-connections=\(.*\)"`
shift;;
--outputdir=*)
outputdir=`expr "x$1" : "x--outputdir=\(.*\)"`
shift;;
--top-builddir=*)
top_builddir=`expr "x$1" : "x--top-builddir=\(.*\)"`
shift;;
--temp-port=*)
temp_port=`expr "x$1" : "x--temp-port=\(.*\)"`
shift;;
--host=*)
PGHOST=`expr "x$1" : "x--host=\(.*\)"`
export PGHOST
unset PGHOSTADDR
shift;;
--port=*)
PGPORT=`expr "x$1" : "x--port=\(.*\)"`
export PGPORT
shift;;
--user=*)
PGUSER=`expr "x$1" : "x--user=\(.*\)"`
export PGUSER
shift;;
-*)
# on error, this will not return but exit
parse_special_options "$1"
shift;;
*)
extra_tests="$extra_tests $1"
shift;;
esac
done
}
setup_environment_variables(){
# This function has two parts. Part 1 sets/unsets environment variables
# independently of what options the script receives.
# Part 2 later sets environment variables with respect to the
# options given.
# =======
# PART 1: Options independent stuff goes here
# =======
# ----------
# Unset locale settings
# ----------
unset LC_COLLATE LC_CTYPE LC_MONETARY LC_MESSAGES LC_NUMERIC LC_TIME LC_ALL LANG LANGUAGE
# On Windows the default locale may not be English, so force it
case $host_platform in
*-*-cygwin*|*-*-mingw32*)
LANG=en
export LANG
;;
esac
# ----------
# On some platforms we can't use Unix sockets.
# ----------
case $host_platform in
*-*-cygwin* | *-*-mingw32*)
listen_on_tcp=yes
esac
# ----------
# Set up diff to ignore horizontal white space differences.
# ----------
case $host_platform in
*-*-sco3.2v5*)
DIFFFLAGS=-b;;
*)
DIFFFLAGS=-w;;
esac
# ----------
# Check for echo -n vs echo \c
# ----------
if echo '\c' | grep c >/dev/null 2>&1; then
ECHO_N='echo -n'
ECHO_C=''
else
ECHO_N='echo'
ECHO_C='\c'
fi
# ----------
# Set backend timezone and datestyle explicitly
#
# To pass the horology test in its current form, the postmaster must be
# started with PGDATESTYLE=ISO, while the frontend must be started with
# PGDATESTYLE=Postgres. We set the postmaster values here and change
# to the frontend settings after the postmaster has been started.
# ----------
PGTZ='PST8PDT'; export PGTZ
PGDATESTYLE='ISO, MDY'; export PGDATESTYLE
# ----------
# Set up SQL shell for the test.
# ----------
psql_test_options="-a -q -X $psql_options"
# =======
# PART 2: Options dependent stuff goes here
# =======
LOGDIR=$outputdir/log
# ----------
# warn of Cygwin likely failure if maxconnections = 0
# and we are running parallel tests
# ----------
case $host_platform in
*-*-cygwin*)
case "$schedule" in
*parallel_schedule*)
if [ $maxconnections -eq 0 ] ; then
echo Using unlimited parallel connections is likely to fail or hang on Cygwin.
echo Try \"$me --max-connections=n\" or \"gmake MAX_CONNECTIONS=n check\"
echo with n = 5 or 10 if this happens.
echo
fi
;;
esac
;;
esac
# ----------
# Set up multibyte environment
# ----------
if [ -n "$multibyte" ]; then
PGCLIENTENCODING=$multibyte
export PGCLIENTENCODING
encoding_opt="-E $multibyte"
else
unset PGCLIENTENCODING
fi
}
do_temp_install(){
if echo x"$temp_install" | grep -v '^x/' >/dev/null 2>&1; then
temp_install="`pwd`/$temp_install"
fi
bindir=$temp_install/install/$bindir
libdir=$temp_install/install/$libdir
datadir=$temp_install/install/$datadir
PGDATA=$temp_install/data
if [ "$unix_sockets" = no ]; then
PGHOST=$hostname
export PGHOST
unset PGHOSTADDR
else
unset PGHOST
unset PGHOSTADDR
fi
# since Makefile isn't very bright, check for out-of-range temp_port
if [ "$temp_port" -ge 1024 -a "$temp_port" -le 65535 ] ; then
PGPORT=$temp_port
else
PGPORT=65432
fi
export PGPORT
# Get rid of environment stuff that might cause psql to misbehave
# while contacting our temp installation
unset PGDATABASE PGUSER PGSERVICE PGSSLMODE PGREQUIRESSL PGCONNECT_TIMEOUT
# ----------
# Set up shared library paths, needed by psql and pg_encoding
# (if you run multibyte). LD_LIBRARY_PATH covers many platforms.
# DYLD_LIBRARY_PATH works on Darwin, and maybe other Mach-based systems.
# Feel free to account for others as well.
# ----------
if [ -n "$LD_LIBRARY_PATH" ]; then
LD_LIBRARY_PATH="$libdir:$LD_LIBRARY_PATH"
else
LD_LIBRARY_PATH=$libdir
fi
export LD_LIBRARY_PATH
if [ -n "$DYLD_LIBRARY_PATH" ]; then
DYLD_LIBRARY_PATH="$libdir:$DYLD_LIBRARY_PATH"
else
DYLD_LIBRARY_PATH=$libdir
fi
export DYLD_LIBRARY_PATH
# ----------
# Windows needs shared libraries in PATH. (Only those linked into
# executables, not dlopen'ed ones)
# ----------
case $host_platform in
*-*-cygwin*|*-*-mingw32*)
PATH=$libdir:$PATH
export PATH
;;
esac
if [ -d "$temp_install" ]; then
message "removing existing temp installation"
rm -rf "$temp_install"
fi
message "creating temporary installation"
if [ ! -d "$LOGDIR" ]; then
mkdir -p "$LOGDIR" || { (exit 2); exit; }
fi
$GMAKE -C "$top_builddir" DESTDIR="$temp_install/install" install with_perl=no with_python=no >"$LOGDIR/install.log" 2>&1
if [ $? -ne 0 ]
then
echo
echo "$me: installation failed"
echo "Examine $LOGDIR/install.log for the reason."
echo
(exit 2); exit
fi
message "initializing database system"
[ "$debug" = yes ] && initdb_options="--debug"
[ "$nolocale" = yes ] && initdb_options="$initdb_options --no-locale"
"$bindir/initdb" -D "$PGDATA" -L "$datadir" --noclean $initdb_options >"$LOGDIR/initdb.log" 2>&1
if [ $? -ne 0 ]
then
echo
echo "$me: initdb failed"
echo "Examine $LOGDIR/initdb.log for the reason."
echo
(exit 2); exit
fi
# ----------
# Start postmaster
# ----------
message "starting postmaster"
[ "$debug" = yes ] && postmaster_options="$postmaster_options -d 5"
if [ "$listen_on_tcp" = yes ]; then
postmaster_options="$postmaster_options -c listen_addresses=$hostname"
else
postmaster_options="$postmaster_options -c listen_addresses="
fi
"$bindir/postmaster" -D "$PGDATA" -F $postmaster_options >"$LOGDIR/postmaster.log" 2>&1 &
postmaster_pid=$!
# Wait till postmaster is able to accept connections (normally only
# a second or so, but Cygwin is reportedly *much* slower). Don't
# wait forever, however.
i=0
max=60
until "$bindir/psql" -X $psql_options postgres </dev/null 2>/dev/null
do
i=`expr $i + 1`
if [ $i -ge $max ]
then
break
fi
if kill -0 $postmaster_pid >/dev/null 2>&1
then
: still starting up
else
break
fi
sleep 1
done
if kill -0 $postmaster_pid >/dev/null 2>&1
then
echo "running on port $PGPORT with pid $postmaster_pid"
else
echo
echo "$me: postmaster did not start"
echo "Examine $LOGDIR/postmaster.log for the reason."
echo
(exit 2); exit
fi
}
dont_temp_install(){
# ----------
# Windows needs shared libraries in PATH. (Only those linked into
# executables, not dlopen'ed ones)
# ----------
case $host_platform in
*-*-cygwin*|*-*-mingw32*)
PATH=$libdir:$PATH
export PATH
;;
esac
if [ -n "$PGPORT" ]; then
port_info="port $PGPORT"
else
port_info="default port"
fi
if [ -n "$PGHOST" ]; then
echo "(using postmaster on $PGHOST, $port_info)"
else
if [ "$unix_sockets" = no ]; then
echo "(using postmaster on localhost, $port_info)"
else
echo "(using postmaster on Unix socket, $port_info)"
fi
fi
}
setup_client_environment_variables(){
PGDATESTYLE='Postgres'
export PGDATESTYLE
}
# ----------
# Exit trap to remove temp file and shut down postmaster
# ----------
# Note: There are some stupid shells (even among recent ones) that
# ignore the argument to exit (as in `exit 1') if there is an exit
# trap. The trap (and thus the shell script) will then always exit
# with the result of the last shell command before the `exit'. Hence
# we have to write `(exit x); exit' below this point.
exit_trap(){
savestatus=$1
if [ -n "$postmaster_pid" ]; then
kill -2 "$postmaster_pid"
wait "$postmaster_pid"
unset postmaster_pid
fi
rm -f "$TMPFILE" && exit $savestatus
}
sig_trap() {
savestatus=$1
echo; echo "caught signal"
if [ -n "$postmaster_pid" ]; then
echo "signalling fast shutdown to postmaster with pid $postmaster_pid"
kill -2 "$postmaster_pid"
wait "$postmaster_pid"
unset postmaster_pid
fi
(exit $savestatus); exit
}
setup_database(){
# this receives the name of the database to set up as its argument
"$bindir/psql" -q -X $psql_options -c "\
alter database \"$1\" set lc_messages to 'C';
alter database \"$1\" set lc_monetary to 'C';
alter database \"$1\" set lc_numeric to 'C';
alter database \"$1\" set lc_time to 'C';" "$1"
if [ $? -ne 0 ]; then
echo "$me: could not set database default locales"
(exit 2); exit
fi
# ----------
# Install any requested PL languages
# ----------
if [ "$enable_shared" = yes ]; then
for lang in xyzzy $load_langs ; do
if [ "$lang" != "xyzzy" ]; then
message "installing $lang"
"$bindir/createlang" $psql_options $lang "$1"
if [ $? -ne 0 ] && [ $? -ne 2 ]; then
echo "$me: createlang $lang failed"
(exit 2); exit
fi
fi
done
fi
}
drop_database(){
message "dropping database \"$1\""
"$bindir/dropdb" $psql_options "$1"
}
create_database(){
# ----------
# We use template0 so that any installation-local cruft in template1
# will not mess up the tests.
# ----------
message "creating database \"$1\""
"$bindir/createdb" $encoding_opt $psql_options --template template0 "$1"
if [ $? -ne 0 ]; then
echo "$me: createdb failed"
(exit 2); exit
fi
setup_database "$1"
}
database_cleanup(){
# ----------
# Remove regressuser* and regressgroup* user accounts.
# ----------
message "dropping regression test user accounts"
"$bindir/psql" -q -X $psql_options -c 'DROP GROUP regressgroup1; DROP GROUP regressgroup2; DROP USER regressuser1, regressuser2, regressuser3, regressuser4;' $dbname 2>/dev/null
if [ $? -eq 2 ]; then
echo "$me: could not drop user accounts"
(exit 2); exit
fi
}
postmaster_shutdown(){
# ----------
# Server shutdown
# ----------
if [ -n "$postmaster_pid" ]; then
message "shutting down postmaster"
"$bindir/pg_ctl" -s -D "$PGDATA" stop
wait "$postmaster_pid"
unset postmaster_pid
fi
}
evaluate(){
# ----------
# Evaluation
# ----------
count_total=`cat "$result_summary_file" | grep '\.\.\.' | wc -l | sed 's/ //g'`
count_ok=`cat "$result_summary_file" | grep '\.\.\. ok' | wc -l | sed 's/ //g'`
count_failed=`cat "$result_summary_file" | grep '\.\.\. FAILED' | wc -l | sed 's/ //g'`
count_ignored=`cat "$result_summary_file" | grep '\.\.\. failed (ignored)' | wc -l | sed 's/ //g'`
echo
if [ $count_total -eq $count_ok ]; then
msg="All $count_total tests passed."
result=0
elif [ $count_failed -eq 0 ]; then
msg="$count_ok of $count_total tests passed, $count_ignored failed test(s) ignored."
result=0
elif [ $count_ignored -eq 0 ]; then
msg="$count_failed of $count_total tests failed."
result=1
else
msg="`expr $count_failed + $count_ignored` of $count_total tests failed, $count_ignored of these failures ignored."
result=1
fi
dashes=`echo " $msg " | sed 's/./=/g'`
echo "$dashes"
echo " $msg "
echo "$dashes"
echo
if [ -s "$diff_file" ]; then
echo "The differences that caused some tests to fail can be viewed in the"
echo "file \`$diff_file'. A copy of the test summary that you see"
echo "above is saved in the file \`$result_summary_file'."
echo
else
rm -f "$diff_file" "$result_summary_file"
fi
}
additional_regress_options=""
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或