postgres.c

/*-------------------------------------------------------------------------
 *
 * postgres.c
 *	  POSTGRES C Backend Interface
 *
 * Portions Copyright (c) 1996-2005, PostgreSQL Global Development Group
 * Portions Copyright (c) 1994, Regents of the University of California
 *
 *
 * IDENTIFICATION
 *	  $PostgreSQL: pgsql/src/backend/tcop/postgres.c,v 1.478 2006/01/08 07:00:25 neilc Exp $
 *
 * NOTES
 *	  this is the "main" module of the postgres backend and
 *	  hence the main module of the "traffic cop".
 *
 *-------------------------------------------------------------------------
 */

#include "postgres.h"

#include <unistd.h>
#include <signal.h>
#include <fcntl.h>
#include <sys/socket.h>
#if HAVE_SYS_SELECT_H
#include <sys/select.h>
#endif
#ifdef HAVE_GETOPT_H
#include <getopt.h>
#endif

#include "access/printtup.h"
#include "access/xlog.h"
#include "catalog/pg_type.h"
#include "commands/async.h"
#include "commands/prepare.h"
#include "commands/trigger.h"
#include "libpq/libpq.h"
#include "libpq/pqformat.h"
#include "libpq/pqsignal.h"
#include "miscadmin.h"
#include "nodes/print.h"
#include "optimizer/cost.h"
#include "optimizer/planner.h"
#include "parser/analyze.h"
#include "parser/parser.h"
#include "rewrite/rewriteHandler.h"
#include "storage/freespace.h"
#include "storage/ipc.h"
#include "storage/pg_shmem.h"
#include "storage/proc.h"
#include "storage/sinval.h"
#include "tcop/fastpath.h"
#include "tcop/pquery.h"
#include "tcop/tcopprot.h"
#include "tcop/utility.h"
#include "utils/builtins.h"
#include "utils/flatfiles.h"
#include "utils/guc.h"
#include "utils/lsyscache.h"
#include "utils/memutils.h"
#include "utils/ps_status.h"
#include "mb/pg_wchar.h"

#include "pgstat.h"

extern int	optind;
extern char *optarg;

/* ----------------
 *		global variables
 * ----------------
 */
const char *debug_query_string; /* for pgmonitor and log_min_error_statement */

/* Note: whereToSendOutput is initialized for the bootstrap/standalone case */
CommandDest whereToSendOutput = DestDebug;

/* flag for logging end of session */
bool		Log_disconnections = false;

LogStmtLevel log_statement = LOGSTMT_NONE;

/* GUC variable for maximum stack depth (measured in kilobytes) */
int			max_stack_depth = 2048;

/* wait N seconds to allow attach from a debugger */
int			PostAuthDelay = 0;



/* ----------------
 *		private variables
 * ----------------
 */

/* max_stack_depth converted to bytes for speed of checking */
static int	max_stack_depth_bytes = 2048 * 1024;

/* stack base pointer (initialized by PostgresMain) */
/* Do not make static so PL/Java can modifiy it */
char	   *stack_base_ptr = NULL;


/*
 * Flag to mark SIGHUP. Whenever the main loop comes around it
 * will reread the configuration file. (Better than doing the
 * reading in the signal handler, ey?)
 */
static volatile sig_atomic_t got_SIGHUP = false;

/*
 * Flag to keep track of whether we have started a transaction.
 * For extended query protocol this has to be remembered across messages.
 */
static bool xact_started = false;

/*
 * Flag to indicate that we are doing the outer loop's read-from-client,
 * as opposed to any random read from client that might happen within
 * commands like COPY FROM STDIN.
 */
static bool DoingCommandRead = false;

/*
 * Flags to implement skip-till-Sync-after-error behavior for messages of
 * the extended query protocol.
 */
static bool doing_extended_query_message = false;
static bool ignore_till_sync = false;

/*
 * If an unnamed prepared statement exists, it's stored here.
 * We keep it separate from the hashtable kept by commands/prepare.c
 * in order to reduce overhead for short-lived queries.
 */
static MemoryContext unnamed_stmt_context = NULL;
static PreparedStatement *unnamed_stmt_pstmt = NULL;


static bool EchoQuery = false;	/* default don't echo */

/*
 * people who want to use EOF should #define DONTUSENEWLINE in
 * tcop/tcopdebug.h
 */
#ifndef TCOP_DONTUSENEWLINE
static int	UseNewLine = 1;		/* Use newlines query delimiters (the default) */
#else
static int	UseNewLine = 0;		/* Use EOF as query delimiters */
#endif   /* TCOP_DONTUSENEWLINE */


/* ----------------------------------------------------------------
 *		decls for routines only used in this file
 * ----------------------------------------------------------------
 */
static int	InteractiveBackend(StringInfo inBuf);
static int	SocketBackend(StringInfo inBuf);
static int	ReadCommand(StringInfo inBuf);
static bool log_after_parse(List *raw_parsetree_list,
				const char *query_string, char **prepare_string);
static List *pg_rewrite_queries(List *querytree_list);
static void start_xact_command(void);
static void finish_xact_command(void);
static bool IsTransactionExitStmt(Node *parsetree);
static bool IsTransactionExitStmtList(List *parseTrees);
static bool IsTransactionStmtList(List *parseTrees);
static void SigHupHandler(SIGNAL_ARGS);
static void log_disconnections(int code, Datum arg);


/* ----------------------------------------------------------------
 *		routines to obtain user input
 * ----------------------------------------------------------------
 */

/* ----------------
 *	InteractiveBackend() is called for user interactive connections
 *
 *	the string entered by the user is placed in its parameter inBuf,
 *	and we act like a Q message was received.
 *
 *	EOF is returned if end-of-file input is seen; time to shut down.
 * ----------------
 */

static int
InteractiveBackend(StringInfo inBuf)
{
	int			c;				/* character read from getc() */
	bool		end = false;	/* end-of-input flag */
	bool		backslashSeen = false;	/* have we seen a \ ? */

	/*
	 * display a prompt and obtain input from the user
	 */
	printf("backend> ");
	fflush(stdout);

	/* Reset inBuf to empty */
	inBuf->len = 0;
	inBuf->data[0] = '\0';
	inBuf->cursor = 0;

	for (;;)
	{
		if (UseNewLine)
		{
			/*
			 * if we are using \n as a delimiter, then read characters until
			 * the \n.
			 */
			while ((c = getc(stdin)) != EOF)
			{
				if (c == '\n')
				{
					if (backslashSeen)
					{
						/* discard backslash from inBuf */
						inBuf->data[--inBuf->len] = '\0';
						backslashSeen = false;
						continue;
					}
					else
					{
						/* keep the newline character */
						appendStringInfoChar(inBuf, '\n');
						break;
					}
				}
				else if (c == '\\')
					backslashSeen = true;
				else
					backslashSeen = false;

				appendStringInfoChar(inBuf, (char) c);
			}

			if (c == EOF)
				end = true;
		}
		else
		{
			/*
			 * otherwise read characters until EOF.
			 */
			while ((c = getc(stdin)) != EOF)
				appendStringInfoChar(inBuf, (char) c);

			if (inBuf->len == 0)
				end = true;
		}

		if (end)
			return EOF;

		/*
		 * otherwise we have a user query so process it.
		 */
		break;
	}

	/* Add '\0' to make it look the same as message case. */
	appendStringInfoChar(inBuf, (char) '\0');

	/*
	 * if the query echo flag was given, print the query..
	 */
	if (EchoQuery)
		printf("statement: %s\n", inBuf->data);
	fflush(stdout);

	return 'Q';
}

/* ----------------
 *	SocketBackend()		Is called for frontend-backend connections
 *
 *	Returns the message type code, and loads message body data into inBuf.
 *
 *	EOF is returned if the connection is lost.
 * ----------------
 */
static int
SocketBackend(StringInfo inBuf)
{
	int			qtype;

	/*
	 * Get message type code from the frontend.
	 */
	qtype = pq_getbyte();

	if (qtype == EOF)			/* frontend disconnected */
	{
		ereport(COMMERROR,
				(errcode(ERRCODE_PROTOCOL_VIOLATION),
				 errmsg("unexpected EOF on client connection")));
		return qtype;
	}

	/*
	 * Validate message type code before trying to read body; if we have lost
	 * sync, better to say "command unknown" than to run out of memory because
	 * we used garbage as a length word.
	 *
	 * This also gives us a place to set the doing_extended_query_message flag
	 * as soon as possible.
	 */
	switch (qtype)
	{
		case 'Q':				/* simple query */
			doing_extended_query_message = false;
			if (PG_PROTOCOL_MAJOR(FrontendProtocol) < 3)
			{
				/* old style without length word; convert */
				if (pq_getstring(inBuf))
				{
					ereport(COMMERROR,
							(errcode(ERRCODE_PROTOCOL_VIOLATION),
							 errmsg("unexpected EOF on client connection")));
					return EOF;
				}
			}
			break;

		case 'F':				/* fastpath function call */
			/* we let fastpath.c cope with old-style input of this */
			doing_extended_query_message = false;
			break;

		case 'X':				/* terminate */
			doing_extended_query_message = false;
			ignore_till_sync = false;
			break;

		case 'B':				/* bind */
		case 'C':				/* close */
		case 'D':				/* describe */
		case 'E':				/* execute */
		case 'H':				/* flush */
		case 'P':				/* parse */
			doing_extended_query_message = true;
			/* these are only legal in protocol 3 */
			if (PG_PROTOCOL_MAJOR(FrontendProtocol) < 3)
				ereport(FATAL,
						(errcode(ERRCODE_PROTOCOL_VIOLATION),
						 errmsg("invalid frontend message type %d", qtype)));
			break;

		case 'S':				/* sync */
			/* stop any active skip-till-Sync */
			ignore_till_sync = false;
			/* mark not-extended, so that a new error doesn't begin skip */
			doing_extended_query_message = false;
			/* only legal in protocol 3 */
			if (PG_PROTOCOL_MAJOR(FrontendProtocol) < 3)
				ereport(FATAL,
						(errcode(ERRCODE_PROTOCOL_VIOLATION),
						 errmsg("invalid frontend message type %d", qtype)));
			break;

		case 'd':				/* copy data */
		case 'c':				/* copy done */
		case 'f':				/* copy fail */
			doing_extended_query_message = false;
			/* these are only legal in protocol 3 */
			if (PG_PROTOCOL_MAJOR(FrontendProtocol) < 3)
				ereport(FATAL,
						(errcode(ERRCODE_PROTOCOL_VIOLATION),
						 errmsg("invalid frontend message type %d", qtype)));
			break;

		default:

			/*
			 * Otherwise we got garbage from the frontend.	We treat this as
			 * fatal because we have probably lost message boundary sync, and
			 * there's no good way to recover.
			 */
			ereport(FATAL,
					(errcode(ERRCODE_PROTOCOL_VIOLATION),
					 errmsg("invalid frontend message type %d", qtype)));
			break;
	}

	/*
	 * In protocol version 3, all frontend messages have a length word next
	 * after the type code; we can read the message contents independently of
	 * the type.
	 */
	if (PG_PROTOCOL_MAJOR(FrontendProtocol) >= 3)
	{
		if (pq_getmessage(inBuf, 0))
			return EOF;			/* suitable message already logged */
	}

	return qtype;
}

/* ----------------
 *		ReadCommand reads a command from either the frontend or
 *		standard input, places it in inBuf, and returns the
 *		message type code (first byte of the message).
 *		EOF is returned if end of file.
 * ----------------
 */
static int
ReadCommand(StringInfo inBuf)
{
	int			result;

	if (whereToSendOutput == DestRemote)
		result = SocketBackend(inBuf);
	else
		result = InteractiveBackend(inBuf);
	return result;
}

/*
 * prepare_for_client_read -- set up to possibly block on client input
 *
 * This must be called immediately before any low-level read from the
 * client connection.  It is necessary to do it at a sufficiently low level
 * that there won't be any other operations except the read kernel call
 * itself between this call and the subsequent client_read_ended() call.
 * In particular there mustn't be use of malloc() or other potentially
 * non-reentrant libc functions.  This restriction makes it safe for us
 * to allow interrupt service routines to execute nontrivial code while
 * we are waiting for input.
 */
void
prepare_for_client_read(void)
{
	if (DoingCommandRead)
	{
		/* Enable immediate processing of asynchronous signals */
		EnableNotifyInterrupt();
		EnableCatchupInterrupt();

		/* Allow "die" interrupt to be processed while waiting */
		ImmediateInterruptOK = true;

		/* And don't forget to detect one that already arrived */
		QueryCancelPending = false;
		CHECK_FOR_INTERRUPTS();
	}
}

/*
 * client_read_ended -- get out of the client-input state
 */
void
client_read_ended(void)
{
	if (DoingCommandRead)
	{
		ImmediateInterruptOK = false;
		QueryCancelPending = false;		/* forget any CANCEL signal */

		DisableNotifyInterrupt();
		DisableCatchupInterrupt();
	}
}


/*
 * Parse a query string and pass it through the rewriter.
 *
 * A list of Query nodes is returned, since the string might contain
 * multiple queries and/or the rewriter might expand one query to several.
 *
 * NOTE: this routine is no longer used for processing interactive queries,
 * but it is still needed for parsing of SQL function bodies.
 */
List *
pg_parse_and_rewrite(const char *query_string,	/* string to execute */
					 Oid *paramTypes,	/* parameter types */
					 int numParams)		/* number of parameters */
{
	List	   *raw_parsetree_list;
	List	   *querytree_list;
	ListCell   *list_item;

	/*
	 * (1) parse the request string into a list of raw parse trees.
	 */
	raw_parsetree_list = pg_parse_query(query_string);

	/*
	 * (2) Do parse analysis and rule rewrite.
	 */
	querytree_list = NIL;
	foreach(list_item, raw_parsetree_list)
	{
		Node	   *parsetree = (Node *) lfirst(list_item);

		querytree_list = list_concat(querytree_list,
									 pg_analyze_and_rewrite(parsetree,
															paramTypes,
															numParams));
	}

	return querytree_list;
}

/*
 * Do raw parsing (only).
 *
 * A list of parsetrees is returned, since there might be multiple
 * commands in the given string.
 *
 * NOTE: for interactive queries, it is important to keep this routine
 * separate from the analysis & rewrite stages.  Analysis and rewriting
 * cannot be done in an aborted transaction, since they require access to
 * database tables.  So, we rely on the raw parser to determine whether
 * we've seen a COMMIT or ABORT command; when we are in abort state, other
 * commands are not processed any further than the raw parse stage.
 */
List *
pg_parse_query(const char *query_string)
{
	List	   *raw_parsetree_list;

	if (log_parser_stats)
		ResetUsage();

	raw_parsetree_list = raw_parser(query_string);

	if (log_parser_stats)
		ShowUsage("PARSER STATISTICS");

	return raw_parsetree_list;
}

static bool
log_after_parse(List *raw_parsetree_list, const char *query_string,
				char **prepare_string)
{
	ListCell   *parsetree_item;
	bool		log_this_statement = (log_statement == LOGSTMT_ALL);

	*prepare_string = NULL;

	/* Check if we need to log the statement, and get prepare_string. */
	foreach(parsetree_item, raw_parsetree_list)
	{
		Node	   *parsetree = (Node *) lfirst(parsetree_item);
		const char *commandTag;

		if (IsA(parsetree, ExplainStmt) &&
			((ExplainStmt *) parsetree)->analyze)
			parsetree = (Node *) (((ExplainStmt *) parsetree)->query);

		if (IsA(parsetree, PrepareStmt))
			parsetree = (Node *) (((PrepareStmt *) parsetree)->query);

		if (IsA(parsetree, SelectStmt) &&
			((SelectStmt *) parsetree)->into == NULL)
			continue;			/* optimization for frequent command */

		if (log_statement == LOGSTMT_MOD &&
			(IsA(parsetree, InsertStmt) ||
			 IsA(parsetree, UpdateStmt) ||
			 IsA(parsetree, DeleteStmt) ||
			 IsA(parsetree, TruncateStmt) ||
			 (IsA(parsetree, CopyStmt) &&
			  ((CopyStmt *) parsetree)->is_from)))		/* COPY FROM */
			log_this_statement = true;

		commandTag = CreateCommandTag(parsetree);
		if ((log_statement == LOGSTMT_MOD ||
			 log_statement == LOGSTMT_DDL) &&
			(strncmp(commandTag, "CREATE ", strlen("CREATE ")) == 0 ||
			 IsA(parsetree, SelectStmt) ||		/* SELECT INTO, CREATE AS */
			 strncmp(commandTag, "ALTER ", strlen("ALTER ")) == 0 ||
			 strncmp(commandTag, "DROP ", strlen("DROP ")) == 0 ||
			 IsA(parsetree, GrantStmt) ||		/* GRANT or REVOKE */
			 IsA(parsetree, CommentStmt)))
			log_this_statement = true;

		/*
		 * For the first EXECUTE we find, record the client statement used by
		 * the PREPARE.
		 */
		if (IsA(parsetree, ExecuteStmt))
		{
			ExecuteStmt *stmt = (ExecuteStmt *) parsetree;
			PreparedStatement *entry;

			if ((entry = FetchPreparedStatement(stmt->name, false)) != NULL &&
				entry->query_string)
			{
				*prepare_string = palloc(strlen(entry->query_string) +
									  strlen("  [protocol PREPARE:  %s]") - 1);
				sprintf(*prepare_string, "  [protocol PREPARE:  %s]",
						entry->query_string);
			}
		}
	}

	if (log_this_statement)
	{
		ereport(LOG,
				(errmsg("statement: %s%s", query_string,
						*prepare_string ? *prepare_string : "")));
		return true;
	}
	else
		return false;
}


/*
 * Given a raw parsetree (gram.y output), and optionally information about
 * types of parameter symbols ($n), perform parse analysis and rule rewriting.
 *
 * A list of Query nodes is returned, since either the analyzer or the
 * rewriter might expand one query to several.
 *
 * NOTE: for reasons mentioned above, this must be separate from raw parsing.
 */
List *
pg_analyze_and_rewrite(Node *parsetree, Oid *paramTypes, int numParams)
{
	List	   *querytree_list;

	/*
	 * (1) Perform parse analysis.
	 */
	if (log_parser_stats)
		ResetUsage();

	querytree_list = parse_analyze(parsetree, paramTypes, numParams);

	if (log_parser_stats)
		ShowUsage("PARSE ANALYSIS STATISTICS");

	/*
	 * (2) Rewrite the queries, as necessary
	 */
	querytree_list = pg_rewrite_queries(querytree_list);

	return querytree_list;
}

/*
 * Perform rewriting of a list of queries produced by parse analysis.
 *
 * Note: queries must just have come from the parser, because we do not do
 * AcquireRewriteLocks() on them.
 */
static List *
pg_rewrite_queries(List *querytree_list)
{
	List	   *new_list = NIL;
	ListCell   *list_item;

	if (log_parser_stats)
		ResetUsage();

	/*
	 * rewritten queries are collected in new_list.  Note there may be more or
	 * fewer than in the original list.
	 */
	foreach(list_item, querytree_list)
	{
		Query	   *querytree = (Query *) lfirst(list_item);

		if (Debug_print_parse)
			elog_node_display(DEBUG1, "parse tree", querytree,
							  Debug_pretty_print);

		if (querytree->commandType == CMD_UTILITY)
		{
			/* don't rewrite utilities, just dump 'em into new_list */
			new_list = lappend(new_list, querytree);
		}
		else
		{
			/* rewrite regular queries */
			List	   *rewritten = QueryRewrite(querytree);

			new_list = list_concat(new_list, rewritten);
		}
	}

	querytree_list = new_list;

	if (log_parser_stats)
		ShowUsage("REWRITER STATISTICS");

#ifdef COPY_PARSE_PLAN_TREES

	/*
	 * Optional debugging check: pass querytree output through copyObject()
	 */
	new_list = (List *) copyObject(querytree_list);
	/* This checks both copyObject() and the equal() routines... */
	if (!equal(new_list, querytree_list))
		elog(WARNING, "copyObject() failed to produce an equal parse tree");
	else
		querytree_list = new_list;
#endif

	if (Debug_print_rewritten)
		elog_node_display(DEBUG1, "rewritten parse tree", querytree_list,
						  Debug_pretty_print);

	return querytree_list;
}


/* Generate a plan for a single already-rewritten query. */
Plan *
pg_plan_query(Query *querytree, ParamListInfo boundParams)
{
	Plan	   *plan;

	/* Utility commands have no plans. */
	if (querytree->commandType == CMD_UTILITY)
		return NULL;

	if (log_planner_stats)
		ResetUsage();

	/* call the optimizer */
	plan = planner(querytree, false, 0, boundParams);

	if (log_planner_stats)
		ShowUsage("PLANNER STATISTICS");

#ifdef COPY_PARSE_PLAN_TREES
	/* Optional debugging check: pass plan output through copyObject() */
	{
		Plan	   *new_plan = (Plan *) copyObject(plan);

		/*
		 * equal() currently does not have routines to compare Plan nodes, so
		 * don't try to test equality here.  Perhaps fix someday?
		 */
#ifdef NOT_USED
		/* This checks both copyObject() and the equal() routines... */
		if (!equal(new_plan, plan))
			elog(WARNING, "copyObject() failed to produce an equal plan tree");
		else
#endif
			plan = new_plan;
	}
#endif

	/*
	 * Print plan if debugging.
	 */
	if (Debug_print_plan)
		elog_node_display(DEBUG1, "plan", plan, Debug_pretty_print);

	return plan;
}

/*
 * Generate plans for a list of already-rewritten queries.
 *
 * If needSnapshot is TRUE, we haven't yet set a snapshot for the current
 * query.  A snapshot must be set before invoking the planner, since it
 * might try to evaluate user-defined functions.  But we must not set a
 * snapshot if the list contains only utility statements, because some
 * utility statements depend on not having frozen the snapshot yet.
 * (We assume that such statements cannot appear together with plannable
 * statements in the rewriter's output.)
 */
List *
pg_plan_queries(List *querytrees, ParamListInfo boundParams,
				bool needSnapshot)
{
	List	   *plan_list = NIL;
	ListCell   *query_list;

	foreach(query_list, querytrees)
	{
		Query	   *query = (Query *) lfirst(query_list);
		Plan	   *plan;

		if (query->commandType == CMD_UTILITY)
		{
			/* Utility commands have no plans. */
			plan = NULL;
		}
		else
		{
			if (needSnapshot)
			{
				ActiveSnapshot = CopySnapshot(GetTransactionSnapshot());
				needSnapshot = false;
			}
			plan = pg_plan_query(query, boundParams);
		}

		plan_list = lappend(plan_list, plan);
	}

	return plan_list;
}


/*
 * exec_simple_query
 *
 * Execute a "simple Query" protocol message.
 */
static void
exec_simple_query(const char *query_string)
{
	CommandDest dest = whereToSendOutput;
	MemoryContext oldcontext;
	List	   *parsetree_list;
	ListCell   *parsetree_item;
	struct timeval start_t,
				stop_t;
	bool		save_log_duration = log_duration;
	int			save_log_min_duration_statement = log_min_duration_statement;
	bool		save_log_statement_stats = log_statement_stats;
	char	   *prepare_string = NULL;
	bool		was_logged = false;

	/*
	 * Report query to various monitoring facilities.
	 */
	debug_query_string = query_string;

	pgstat_report_activity(query_string);

	/*
	 * We use save_log_* so "SET log_duration = true"  and "SET
	 * log_min_duration_statement = true" don't report incorrect time because
	 * gettimeofday() wasn't called. Similarly, log_statement_stats has to be
	 * captured once.
	 */
	if (save_log_duration || save_log_min_duration_statement != -1)
		gettimeofday(&start_t, NULL);

	if (save_log_statement_stats)
		ResetUsage();

	/*
	 * Start up a transaction command.	All queries generated by the
	 * query_string will be in this same command block, *unless* we find a
	 * BEGIN/COMMIT/ABORT statement; we have to force a new xact command after
	 * one of those, else bad things will happen in xact.c. (Note that this
	 * will normally change current memory context.)
	 */
	start_xact_command();

	/*
	 * Zap any pre-existing unnamed statement.	(While not strictly necessary,
	 * it seems best to define simple-Query mode as if it used the unnamed
	 * statement and portal; this ensures we recover any storage used by prior
	 * unnamed operations.)
	 */
	unnamed_stmt_pstmt = NULL;
	if (unnamed_stmt_context)
	{
		DropDependentPortals(unnamed_stmt_context);
		MemoryContextDelete(unnamed_stmt_context);
	}
	unnamed_stmt_context = NULL;

	/*
	 * Switch to appropriate context for constructing parsetrees.
	 */
	oldcontext = MemoryContextSwitchTo(MessageContext);

	QueryContext = CurrentMemoryContext;

	/*
	 * Do basic parsing of the query or queries (this should be safe even if
	 * we are in aborted transaction state!)
	 */
	parsetree_list = pg_parse_query(query_string);

	if (log_statement != LOGSTMT_NONE || save_log_min_duration_statement != -1)
		was_logged = log_after_parse(parsetree_list, query_string,
									 &prepare_string);

	/*
	 * Switch back to transaction context to enter the loop.
	 */
	MemoryContextSwitchTo(oldcontext);

	/*
	 * Run through the raw parsetree(s) and process each one.
	 */
	foreach(parsetree_item, parsetree_list)
	{
		Node	   *parsetree = (Node *) lfirst(parsetree_item);
		const char *commandTag;
		char		completionTag[COMPLETION_TAG_BUFSIZE];
		List	   *querytree_list,
				   *plantree_list;
		Portal		portal;
		DestReceiver *receiver;
		int16		format;

		/*
		 * Get the command name for use in status display (it also becomes the
		 * default completion tag, down inside PortalRun).	Set ps_status and
		 * do any special start-of-SQL-command processing needed by the
		 * destination.
		 */
		commandTag = CreateCommandTag(parsetree);

		set_ps_display(commandTag);

		BeginCommand(commandTag, dest);

		/*
		 * If we are in an aborted transaction, reject all commands except
		 * COMMIT/ABORT.  It is important that this test occur before we try
		 * to do parse analysis, rewrite, or planning, since all those phases
		 * try to do database accesses, which may fail in abort state. (It
		 * might be safe to allow some additional utility commands in this
		 * state, but not many...)
		 */
		if (IsAbortedTransactionBlockState() &&
			!IsTransactionExitStmt(parsetree))
			ereport(ERROR,
					(errcode(ERRCODE_IN_FAILED_SQL_TRANSACTION),
					 errmsg("current transaction is aborted, "
						"commands ignored until end of transaction block")));

		/* Make sure we are in a transaction command */
		start_xact_command();

		/* If we got a cancel signal in parsing or prior command, quit */
		CHECK_FOR_INTERRUPTS();

		/*
		 * OK to analyze, rewrite, and plan this query.
		 *
		 * Switch to appropriate context for constructing querytrees (again,
		 * these must outlive the execution context).
		 */
		oldcontext = MemoryContextSwitchTo(MessageContext);

		querytree_list = pg_analyze_and_rewrite(parsetree, NULL, 0);

		plantree_list = pg_plan_queries(querytree_list, NULL, true);

		/* If we got a cancel signal in analysis or planning, quit */
		CHECK_FOR_INTERRUPTS();

		/*
		 * Create unnamed portal to run the query or queries in. If there
		 * already is one, silently drop it.
		 */
		portal = CreatePortal("", true, true);

		PortalDefineQuery(portal,
						  query_string,
						  commandTag,
						  querytree_list,
						  plantree_list,
						  MessageContext);

		/*
		 * Start the portal.  No parameters here.
		 */
		PortalStart(portal, NULL, InvalidSnapshot);

		/*
		 * Select the appropriate output format: text unless we are doing a
		 * FETCH from a binary cursor.	(Pretty grotty to have to do this here
		 * --- but it avoids grottiness in other places.  Ah, the joys of
		 * backward compatibility...)
		 */
		format = 0;				/* TEXT is default */
		if (IsA(parsetree, FetchStmt))
		{
			FetchStmt  *stmt = (FetchStmt *) parsetree;

			if (!stmt->ismove)
			{
				Portal		fportal = GetPortalByName(stmt->portalname);

				if (PortalIsValid(fportal) &&
					(fportal->cursorOptions & CURSOR_OPT_BINARY))
					format = 1; /* BINARY */
			}
		}
		PortalSetResultFormat(portal, 1, &format);

		/*
		 * Now we can create the destination receiver object.
		 */
		receiver = CreateDestReceiver(dest, portal);

		/*
		 * Switch back to transaction context for execution.
		 */
		MemoryContextSwitchTo(oldcontext);

		/*
		 * Run the portal to completion, and then drop it (and the receiver).
		 */
		(void) PortalRun(portal,
						 FETCH_ALL,
						 receiver,
						 receiver,
						 completionTag);

		(*receiver->rDestroy) (receiver);

		PortalDrop(portal, false);

		if (IsA(parsetree, TransactionStmt))
		{
			/*
			 * If this was a transaction control statement, commit it. We will
			 * start a new xact command for the next command (if any).
			 */
			finish_xact_command();
		}
		else if (lnext(parsetree_item) == NULL)
		{
			/*
			 * If this is the last parsetree of the query string, close down
			 * transaction statement before reporting command-complete.  This
			 * is so that any end-of-transaction errors are reported before
			 * the command-complete message is issued, to avoid confusing
			 * clients who will expect either a command-complete message or an
			 * error, not one and then the other.  But for compatibility with
			 * historical Postgres behavior, we do not force a transaction
			 * boundary between queries appearing in a single query string.
			 */
			finish_xact_command();
		}
		else
		{
			/*
			 * We need a CommandCounterIncrement after every query, except
			 * those that start or end a transaction block.
			 */
			CommandCounterIncrement();
		}

		/*
		 * Tell client that we're done with this query.  Note we emit exactly
		 * one EndCommand report for each raw parsetree, thus one for each SQL
		 * command the client sent, regardless of rewriting. (But a command
		 * aborted by error will not send an EndCommand report at all.)
		 */
		EndCommand(completionTag, dest);
	}							/* end loop over parsetrees */

	/*
	 * Close down transaction statement, if one is open.
	 */
	finish_xact_command();

	/*
	 * If there were no parsetrees, return EmptyQueryResponse message.
	 */
	if (!parsetree_list)
		NullCommand(dest);

	QueryContext = NULL;

	/*
	 * Combine processing here as we need to calculate the query duration in
	 * both instances.
	 */
	if (save_log_duration || save_log_min_duration_statement != -1)
	{
		long		usecs;

		gettimeofday(&stop_t, NULL);
		if (stop_t.tv_usec < start_t.tv_usec)
		{
			stop_t.tv_sec--;
			stop_t.tv_usec += 1000000;
		}
		usecs = (long) (stop_t.tv_sec - start_t.tv_sec) * 1000000 +
			(long) (stop_t.tv_usec - start_t.tv_usec);

		/* Only print duration if we previously printed the statement. */
		if (was_logged && save_log_duration)
			ereport(LOG,
					(errmsg("duration: %ld.%03ld ms",
							(long) ((stop_t.tv_sec - start_t.tv_sec) * 1000 +
								  (stop_t.tv_usec - start_t.tv_usec) / 1000),
						 (long) (stop_t.tv_usec - start_t.tv_usec) % 1000)));

		/*
		 * Output a duration_statement to the log if the query has exceeded
		 * the min duration, or if we are to print all durations.
		 */
		if (save_log_min_duration_statement == 0 ||
			(save_log_min_duration_statement > 0 &&
			 usecs >= save_log_min_duration_statement * 1000))
			ereport(LOG,
					(errmsg("duration: %ld.%03ld ms  statement: %s%s",
							(long) ((stop_t.tv_sec - start_t.tv_sec) * 1000 +
								  (stop_t.tv_usec - start_t.tv_usec) / 1000),
							(long) (stop_t.tv_usec - start_t.tv_usec) % 1000,
							query_string,
							prepare_string ? prepare_string : "")));
	}

	if (save_log_statement_stats)
		ShowUsage("QUERY STATISTICS");

	if (prepare_string != NULL)
		pfree(prepare_string);

	debug_query_string = NULL;
}

/*
 * exec_parse_message
 *
 * Execute a "Parse" protocol message.
 */
static void
exec_parse_message(const char *query_string,	/* string to execute */
				   const char *stmt_name,		/* name for prepared stmt */
				   Oid *paramTypes,		/* parameter types */
				   int numParams)		/* number of parameters */
{
	MemoryContext oldcontext;
	List	   *parsetree_list;
	const char *commandTag;
	List	   *querytree_list,
			   *plantree_list,
			   *param_list;
	bool		is_named;
	bool		save_log_statement_stats = log_statement_stats;

	/*
	 * Report query to various monitoring facilities.
	 */
	debug_query_string = query_string;

	pgstat_report_activity(query_string);

	set_ps_display("PARSE");

	if (save_log_statement_stats)
		ResetUsage();

	if (log_statement == LOGSTMT_ALL)
		ereport(LOG,
				(errmsg("statement: [protocol] PREPARE %s AS %s",
						(*stmt_name != '\0') ? stmt_name : "<unnamed>",
						query_string)));

	/*
	 * Start up a transaction command so we can run parse analysis etc. (Note
	 * that this will normally change current memory context.) Nothing happens
	 * if we are already in one.
	 */
	start_xact_command();

	/*
	 * Switch to appropriate context for constructing parsetrees.
	 *
	 * We have two strategies depending on whether the prepared statement is
	 * named or not.  For a named prepared statement, we do parsing in
	 * MessageContext and copy the finished trees into the prepared
	 * statement's private context; then the reset of MessageContext releases
	 * temporary space used by parsing and planning.  For an unnamed prepared
	 * statement, we assume the statement isn't going to hang around long, so
	 * getting rid of temp space quickly is probably not worth the costs of
	 * copying parse/plan trees.  So in this case, we set up a special context
	 * for the unnamed statement, and do all the parsing/planning therein.
	 */
	is_named = (stmt_name[0] != '\0');
	if (is_named)
	{
		/* Named prepared statement --- parse in MessageContext */
		oldcontext = MemoryContextSwitchTo(MessageContext);
	}
	else
	{
		/* Unnamed prepared statement --- release any prior unnamed stmt */
		unnamed_stmt_pstmt = NULL;
		if (unnamed_stmt_context)
		{
			DropDependentPortals(unnamed_stmt_context);
			MemoryContextDelete(unnamed_stmt_context);
		}
		unnamed_stmt_context = NULL;
		/* create context for parsing/planning */
		unnamed_stmt_context =
			AllocSetContextCreate(TopMemoryContext,
								  "unnamed prepared statement",
								  ALLOCSET_DEFAULT_MINSIZE,
								  ALLOCSET_DEFAULT_INITSIZE,
								  ALLOCSET_DEFAULT_MAXSIZE);
		oldcontext = MemoryContextSwitchTo(unnamed_stmt_context);
	}

	QueryContext = CurrentMemoryContext;

	/*
	 * Do basic parsing of the query or queries (this should be safe even if
	 * we are in aborted transaction state!)
	 */
	parsetree_list = pg_parse_query(query_string);

	/*
	 * We only allow a single user statement in a prepared statement. This is
	 * mainly to keep the protocol simple --- otherwise we'd need to worry
	 * about multiple result tupdescs and things like that.
	 */
	if (list_length(parsetree_list) > 1)
		ereport(ERROR,
				(errcode(ERRCODE_SYNTAX_ERROR),
		errmsg("cannot insert multiple commands into a prepared statement")));

	if (parsetree_list != NIL)
	{
		Node	   *parsetree = (Node *) linitial(parsetree_list);
		int			i;

		/*
		 * Get the command name for possible use in status display.
		 */
		commandTag = CreateCommandTag(parsetree);

		/*
		 * If we are in an aborted transaction, reject all commands except
		 * COMMIT/ROLLBACK.  It is important that this test occur before we
		 * try to do parse analysis, rewrite, or planning, since all those
		 * phases try to do database accesses, which may fail in abort state.
		 * (It might be safe to allow some additional utility commands in this
		 * state, but not many...)
		 */
		if (IsAbortedTransactionBlockState() &&
			!IsTransactionExitStmt(parsetree))
			ereport(ERROR,
					(errcode(ERRCODE_IN_FAILED_SQL_TRANSACTION),
					 errmsg("current transaction is aborted, "
						"commands ignored until end of transaction block")));

		/*
		 * OK to analyze, rewrite, and plan this query.  Note that the
		 * originally specified parameter set is not required to be complete,
		 * so we have to use parse_analyze_varparams().
		 */
		if (log_parser_stats)
			ResetUsage();

		querytree_list = parse_analyze_varparams(parsetree,
												 &paramTypes,
												 &numParams);

		/*
		 * Check all parameter types got determined, and convert array
		 * representation to a list for storage.
		 */
		param_list = NIL;
		for (i = 0; i < numParams; i++)
		{
			Oid			ptype = paramTypes[i];

			if (ptype == InvalidOid || ptype == UNKNOWNOID)
				ereport(ERROR,
						(errcode(ERRCODE_INDETERMINATE_DATATYPE),
					 errmsg("could not determine data type of parameter $%d",
							i + 1)));
			param_list = lappend_oid(param_list, ptype);
		}

		if (log_parser_stats)
			ShowUsage("PARSE ANALYSIS STATISTICS");

		querytree_list = pg_rewrite_queries(querytree_list);

		/*
		 * If this is the unnamed statement and it has parameters, defer query
		 * planning until Bind.  Otherwise do it now.
		 */
		if (!is_named && numParams > 0)
			plantree_list = NIL;
		else
			plantree_list = pg_plan_queries(querytree_list, NULL, true);
	}
	else
	{
		/* Empty input string.	This is legal. */
		commandTag = NULL;
		querytree_list = NIL;
		plantree_list = NIL;
		param_list = NIL;
	}

	/* If we got a cancel signal in analysis or planning, quit */
	CHECK_FOR_INTERRUPTS();

	/*
	 * Store the query as a prepared statement.  See above comments.
	 */
	if (is_named)
	{
		StorePreparedStatement(stmt_name,
							   query_string,
							   commandTag,
							   querytree_list,
							   plantree_list,
							   param_list,
							   false);
	}
	else
	{
		PreparedStatement *pstmt;

		pstmt = (PreparedStatement *) palloc0(sizeof(PreparedStatement));
		/* query_string needs to be copied into unnamed_stmt_context */
		pstmt->query_string = pstrdup(query_string);
		/* the rest is there already */
		pstmt->commandTag = commandTag;
		pstmt->query_list = querytree_list;
		pstmt->plan_list = plantree_list;
		pstmt->argtype_list = param_list;
		pstmt->from_sql = false;
		pstmt->context = unnamed_stmt_context;
		/* Now the unnamed statement is complete and valid */
		unnamed_stmt_pstmt = pstmt;
	}

	MemoryContextSwitchTo(oldcontext);

	QueryContext = NULL;

	/*
	 * We do NOT close the open transaction command here; that only happens
	 * when the client sends Sync.	Instead, do CommandCounterIncrement just
	 * in case something happened during parse/plan.
	 */
	CommandCounterIncrement();

	/*
	 * Send ParseComplete.
	 */
	if (whereToSendOutput == DestRemote)
		pq_putemptymessage('1');

	if (save_log_statement_stats)
		ShowUsage("PARSE MESSAGE STATISTICS");

	debug_query_string = NULL;
}

/*
 * exec_bind_message
 *
 * Process a "Bind" message to create a portal from a prepared statement
 */
static void
exec_bind_message(StringInfo input_message)
{
	const char *portal_name;
	const char *stmt_name;
	int			numPFormats;
	int16	   *pformats = NULL;
	int			numParams;
	int			numRFormats;
	int16	   *rformats = NULL;
	int			i;
	PreparedStatement *pstmt;
	Portal		portal;
	ParamListInfo params;

	pgstat_report_activity("<BIND>");

	set_ps_display("BIND");

	/*
	 * Start up a transaction command so we can call functions etc. (Note that
	 * this will normally change current memory context.) Nothing happens if
	 * we are already in one.
	 */
	start_xact_command();

	/* Switch back to message context */
	MemoryContextSwitchTo(MessageContext);

	/* Get the fixed part of the message */
	portal_name = pq_getmsgstring(input_message);
	stmt_name = pq_getmsgstring(input_message);

	/* Get the parameter format codes */
	numPFormats = pq_getmsgint(input_message, 2);
	if (numPFormats > 0)
	{
		pformats = (int16 *) palloc(numPFormats * sizeof(int16));
		for (i = 0; i < numPFormats; i++)
			pformats[i] = pq_getmsgint(input_message, 2);
	}

	/* Get the parameter value count */
	numParams = pq_getmsgint(input_message, 2);

	if (numPFormats > 1 && numPFormats != numParams)
		ereport(ERROR,
				(errcode(ERRCODE_PROTOCOL_VIOLATION),
			errmsg("bind message has %d parameter formats but %d parameters",
				   numPFormats, numParams)));

	/* Find prepared statement */
	if (stmt_name[0] != '\0')
		pstmt = FetchPreparedStatement(stmt_name, true);
	else
	{
		/* special-case the unnamed statement */
		pstmt = unnamed_stmt_pstmt;
		if (!pstmt)
			ereport(ERROR,
					(errcode(ERRCODE_UNDEFINED_PSTATEMENT),
					 errmsg("unnamed prepared statement does not exist")));
	}

	if (numParams != list_length(pstmt->argtype_list))
		ereport(ERROR,
				(errcode(ERRCODE_PROTOCOL_VIOLATION),
				 errmsg("bind message supplies %d parameters, but prepared statement \"%s\" requires %d",
				   numParams, stmt_name, list_length(pstmt->argtype_list))));

	/*
	 * If we are in aborted transaction state, the only portals we can
	 * actually run are those containing COMMIT or ROLLBACK commands. We
	 * disallow binding anything else to avoid problems with infrastructure
	 * that expects to run inside a valid transaction.	We also disallow
	 * binding any parameters, since we can't risk calling user-defined I/O
	 * functions.
	 */
	if (IsAbortedTransactionBlockState() &&
		(!IsTransactionExitStmtList(pstmt->query_list) ||
		 numParams != 0))
		ereport(ERROR,
				(errcode(ERRCODE_IN_FAILED_SQL_TRANSACTION),
				 errmsg("current transaction is aborted, "
						"commands ignored until end of transaction block")));

	/*
	 * Create the portal.  Allow silent replacement of an existing portal only
	 * if the unnamed portal is specified.
	 */
	if (portal_name[0] == '\0')
		portal = CreatePortal(portal_name, true, true);
	else
		portal = CreatePortal(portal_name, false, false);

	/* We need to output the parameter values someday */
	if (log_statement == LOGSTMT_ALL)
		ereport(LOG,
				(errmsg("statement: [protocol] <BIND> %s", portal_name)));

	/*
	 * Fetch parameters, if any, and store in the portal's memory context.
	 */
	if (numParams > 0)
	{
		ListCell   *l;
		MemoryContext oldContext;

		oldContext = MemoryContextSwitchTo(PortalGetHeapMemory(portal));

		params = (ParamListInfo)
			palloc0((numParams + 1) * sizeof(ParamListInfoData));

		i = 0;
		foreach(l, pstmt->argtype_list)
		{
			Oid			ptype = lfirst_oid(l);
			int32		plength;
			bool		isNull;

			plength = pq_getmsgint(input_message, 4);
			isNull = (plength == -1);

			if (!isNull)
			{
				const char *pvalue = pq_getmsgbytes(input_message, plength);
				int16		pformat;
				StringInfoData pbuf;
				char		csave;

				if (numPFormats > 1)
					pformat = pformats[i];
				else if (numPFormats > 0)
					pformat = pformats[0];
				else
					pformat = 0;	/* default = text */

				/*
				 * Rather than copying data around, we just set up a phony
				 * StringInfo pointing to the correct portion of the message
				 * buffer.	We assume we can scribble on the message buffer so
				 * as to maintain the convention that StringInfos have a
				 * trailing null.  This is grotty but is a big win when
				 * dealing with very large parameter strings.
				 */
				pbuf.data = (char *) pvalue;
				pbuf.maxlen = plength + 1;
				pbuf.len = plength;
				pbuf.cursor = 0;

				csave = pbuf.data[plength];
				pbuf.data[plength] = '\0';

				if (pformat == 0)
				{
					Oid			typinput;
					Oid			typioparam;
					char	   *pstring;

					getTypeInputInfo(ptype, &typinput, &typioparam);

					/*
					 * We have to do encoding conversion before calling the
					 * typinput routine.
					 */
					pstring = pg_client_to_server(pbuf.data, plength);
					params[i].value =
						OidFunctionCall3(typinput,
										 CStringGetDatum(pstring),
										 ObjectIdGetDatum(typioparam),
										 Int32GetDatum(-1));
					/* Free result of encoding conversion, if any */
					if (pstring != pbuf.data)
						pfree(pstring);
				}
				else if (pformat == 1)
				{
					Oid			typreceive;
					Oid			typioparam;

					/*
					 * Call the parameter type's binary input converter
					 */
					getTypeBinaryInputInfo(ptype, &typreceive, &typioparam);

					params[i].value =
						OidFunctionCall3(typreceive,
										 PointerGetDatum(&pbuf),
										 ObjectIdGetDatum(typioparam),
										 Int32GetDatum(-1));

					/* Trouble if it didn't eat the whole buffer */
					if (pbuf.cursor != pbuf.len)
						ereport(ERROR,
							 (errcode(ERRCODE_INVALID_BINARY_REPRESENTATION),
							  errmsg("incorrect binary data format in bind parameter %d",
									 i + 1)));
				}
				else
				{
					ereport(ERROR,
							(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
							 errmsg("unsupported format code: %d",
									pformat)));
				}

				/* Restore message buffer contents */
				pbuf.data[plength] = csave;
			}

			params[i].kind = PARAM_NUM;
			params[i].id = i + 1;
			params[i].ptype = ptype;
			params[i].isnull = isNull;

			i++;
		}

		params[i].kind = PARAM_INVALID;

		MemoryContextSwitchTo(oldContext);
	}
	else
		params = NULL;

	/* Get the result format codes */
	numRFormats = pq_getmsgint(input_message, 2);
	if (numRFormats > 0)
	{
		rformats = (int16 *) palloc(numRFormats * sizeof(int16));
		for (i = 0; i < numRFormats; i++)
			rformats[i] = pq_getmsgint(input_message, 2);
	}

	pq_getmsgend(input_message);

	/*
	 * If we didn't plan the query before, do it now.  This allows the planner
	 * to make use of the concrete parameter values we now have.
	 *
	 * This happens only for unnamed statements, and so switching into the
	 * statement context for planning is correct (see notes in
	 * exec_parse_message).
	 */
	if (pstmt->plan_list == NIL && pstmt->query_list != NIL)
	{
		MemoryContext oldContext = MemoryContextSwitchTo(pstmt->context);

		pstmt->plan_list = pg_plan_queries(pstmt->query_list, params, true);
		MemoryContextSwitchTo(oldContext);
	}

	/*
	 * Define portal and start execution.
	 */
	PortalDefineQuery(portal,
					  pstmt->query_string,
					  pstmt->commandTag,
					  pstmt->query_list,
					  pstmt->plan_list,
					  pstmt->context);

	PortalStart(portal, params, InvalidSnapshot);

	/*
	 * Apply the result format requests to the portal.
	 */
	PortalSetResultFormat(portal, numRFormats, rformats);

	/*
	 * Send BindComplete.
	 */
	if (whereToSendOutput == DestRemote)
		pq_putemptymessage('2');
}

/*
 * exec_execute_message
 *
 * Process an "Execute" message for a portal
 */
static void
exec_execute_message(const char *portal_name, long max_rows)
{
	CommandDest dest;
	DestReceiver *receiver;
	Portal		portal;
	bool		completed;
	char		completionTag[COMPLETION_TAG_BUFSIZE];
	struct timeval start_t,
				stop_t;
	bool		save_log_duration = log_duration;
	int			save_log_min_duration_statement = log_min_duration_statement;
	bool		save_log_statement_stats = log_statement_stats;
	bool		execute_is_fetch = false;

	/* Adjust destination to tell printtup.c what to do */
	dest = whereToSendOutput;
	if (dest == DestRemote)
		dest = DestRemoteExecute;

	portal = GetPortalByName(portal_name);
	if (!PortalIsValid(portal))
		ereport(ERROR,
				(errcode(ERRCODE_UNDEFINED_CURSOR),
				 errmsg("portal \"%s\" does not exist", portal_name)));

	/*
	 * If we re-issue an Execute protocol request against an existing portal,
	 * then we are only fetching more rows rather than completely re-executing
	 * the query from the start. atStart is never reset for a v3 portal, so we
	 * are safe to use this check.
	 */
	if (!portal->atStart)
		execute_is_fetch = true;

	/*
	 * If the original query was a null string, just return
	 * EmptyQueryResponse.
	 */
	if (portal->commandTag == NULL)
	{
		Assert(portal->parseTrees == NIL);
		NullCommand(dest);
		return;
	}

	/* Should we display the portal names here? */
	if (execute_is_fetch)
	{
		debug_query_string = "fetch message";
		pgstat_report_activity("<FETCH>");
	}
	else if (portal->sourceText)
	{
		debug_query_string = portal->sourceText;
		pgstat_report_activity(portal->sourceText);
	}
	else
	{
		debug_query_string = "execute message";
		pgstat_report_activity("<EXECUTE>");
	}

	set_ps_display(portal->commandTag);

	/*
	 * We use save_log_* so "SET log_duration = true"  and "SET
	 * log_min_duration_statement = true" don't report incorrect time because
	 * gettimeofday() wasn't called. Similarly, log_statement_stats has to be
	 * captured once.
	 */
	if (save_log_duration || save_log_min_duration_statement != -1)
		gettimeofday(&start_t, NULL);

	if (save_log_statement_stats)
		ResetUsage();

	if (log_statement == LOGSTMT_ALL)
		/* We have the portal, so output the source query. */
		ereport(LOG,
				(errmsg("statement: [protocol] %sEXECUTE %s  [PREPARE:  %s]",
						(execute_is_fetch) ? "FETCH from " : "",
						(*portal_name != '\0') ? portal_name : "<unnamed>",
						portal->sourceText ? portal->sourceText : "")));

	BeginCommand(portal->commandTag, dest);

	/*
	 * Create dest receiver in MessageContext (we don't want it in transaction
	 * context, because that may get deleted if portal contains VACUUM).
	 */
	receiver = CreateDestReceiver(dest, portal);

	/*
	 * Ensure we are in a transaction command (this should normally be the
	 * case already due to prior BIND).
	 */
	start_xact_command();

	/*
	 * If we are in aborted transaction state, the only portals we can
	 * actually run are those containing COMMIT or ROLLBACK commands.
	 */
	if (IsAbortedTransactionBlockState() &&
		!IsTransactionExitStmtList(portal->parseTrees))
		ereport(ERROR,
				(errcode(ERRCODE_IN_FAILED_SQL_TRANSACTION),
				 errmsg("current transaction is aborted, "
						"commands ignored until end of transaction block")));

	/* Check for cancel signal before we start execution */
	CHECK_FOR_INTERRUPTS();

	/*
	 * Okay to run the portal.
	 */
	if (max_rows <= 0)
		max_rows = FETCH_ALL;

	completed = PortalRun(portal,
						  max_rows,
						  receiver,
						  receiver,
						  completionTag);

	(*receiver->rDestroy) (receiver);

	if (completed)
	{
		if (IsTransactionStmtList(portal->parseTrees))
		{
			/*
			 * If this was a transaction control statement, commit it.	We
			 * will start a new xact command for the next command (if any).
			 */
			finish_xact_command();
		}
		else
		{
			/*
			 * We need a CommandCounterIncrement after every query, except
			 * those that start or end a transaction block.
			 */
			CommandCounterIncrement();
		}

		/* Send appropriate CommandComplete to client */
		EndCommand(completionTag, dest);
	}
	else
	{
		/* Portal run not complete, so send PortalSuspended */
		if (whereToSendOutput == DestRemote)
			pq_putemptymessage('s');
	}

	/*
	 * Combine processing here as we need to calculate the query duration in
	 * both instances.
	 */
	if (save_log_duration || save_log_min_duration_statement != -1)
	{
		long		usecs;

		gettimeofday(&stop_t, NULL);
		if (stop_t.tv_usec < start_t.tv_usec)
		{
			stop_t.tv_sec--;
			stop_t.tv_usec += 1000000;
		}
		usecs = (long) (stop_t.tv_sec - start_t.tv_sec) * 1000000 +
			(long) (stop_t.tv_usec - start_t.tv_usec);

		/* Only print duration if we previously printed the statement. */
		if (log_statement == LOGSTMT_ALL && save_log_duration)
			ereport(LOG,
					(errmsg("duration: %ld.%03ld ms",
							(long) ((stop_t.tv_sec - start_t.tv_sec) * 1000 +
								  (stop_t.tv_usec - start_t.tv_usec) / 1000),
						 (long) (stop_t.tv_usec - start_t.tv_usec) % 1000)));

		/*
		 * Output a duration_statement to the log if the query has exceeded
		 * the min duration, or if we are to print all durations.
		 */
		if (save_log_min_duration_statement == 0 ||
			(save_log_min_duration_statement > 0 &&
			 usecs >= save_log_min_duration_statement * 1000))
			ereport(LOG,
					(errmsg("duration: %ld.%03ld ms  statement: [protocol] %sEXECUTE %s  [PREPARE:  %s]",
							(long) ((stop_t.tv_sec - start_t.tv_sec) * 1000 +
								  (stop_t.tv_usec - start_t.tv_usec) / 1000),
							(long) (stop_t.tv_usec - start_t.tv_usec) % 1000,
							(execute_is_fetch) ? "FETCH from " : "",
						  (*portal_name != '\0') ? portal_name : "<unnamed>",
							portal->sourceText ? portal->sourceText : "")));
	}

	if (save_log_statement_stats)
		ShowUsage("QUERY STATISTICS");

	debug_query_string = NULL;
}

/*
 * exec_describe_statement_message
 *
 * Process a "Describe" message for a prepared statement
 */
static void
exec_describe_statement_message(const char *stmt_name)
{
	PreparedStatement *pstmt;
	TupleDesc	tupdesc;
	ListCell   *l;
	StringInfoData buf;

	/*
	 * Start up a transaction command. (Note that this will normally change
	 * current memory context.) Nothing happens if we are already in one.
	 */
	start_xact_command();

	/* Switch back to message context */
	MemoryContextSwitchTo(MessageContext);

	/* Find prepared statement */
	if (stmt_name[0] != '\0')
		pstmt = FetchPreparedStatement(stmt_name, true);
	else
	{
		/* special-case the unnamed statement */
		pstmt = unnamed_stmt_pstmt;
		if (!pstmt)
			ereport(ERROR,
					(errcode(ERRCODE_UNDEFINED_PSTATEMENT),
					 errmsg("unnamed prepared statement does not exist")));
	}

	/*
	 * If we are in aborted transaction state, we can't safely create a result
	 * tupledesc, because that needs catalog accesses.  Hence, refuse to
	 * Describe statements that return data.  (We shouldn't just refuse all
	 * Describes, since that might break the ability of some clients to issue
	 * COMMIT or ROLLBACK commands, if they use code that blindly Describes
	 * whatever it does.)  We can Describe parameters without doing anything
	 * dangerous, so we don't restrict that.
	 */
	if (IsAbortedTransactionBlockState() &&
		PreparedStatementReturnsTuples(pstmt))
		ereport(ERROR,
				(errcode(ERRCODE_IN_FAILED_SQL_TRANSACTION),
				 errmsg("current transaction is aborted, "
						"commands ignored until end of transaction block")));

	if (whereToSendOutput != DestRemote)
		return;					/* can't actually do anything... */

	/*
	 * First describe the parameters...
	 */
	pq_beginmessage(&buf, 't'); /* parameter description message type */
	pq_sendint(&buf, list_length(pstmt->argtype_list), 2);

	foreach(l, pstmt->argtype_list)
	{
		Oid			ptype = lfirst_oid(l);

		pq_sendint(&buf, (int) ptype, 4);
	}
	pq_endmessage(&buf);

	/*
	 * Next send RowDescription or NoData to describe the result...
	 */
	tupdesc = FetchPreparedStatementResultDesc(pstmt);
	if (tupdesc)
		SendRowDescriptionMessage(tupdesc,
								  FetchPreparedStatementTargetList(pstmt),
								  NULL);
	else
		pq_putemptymessage('n');	/* NoData */

}

/*
 * exec_describe_portal_message
 *
 * Process a "Describe" message for a portal
 */
static void
exec_describe_portal_message(const char *portal_name)
{
	Portal		portal;

	/*
	 * Start up a transaction command. (Note that this will normally change
	 * current memory context.) Nothing happens if we are already in one.
	 */
	start_xact_command();

	/* Switch back to message context */
	MemoryContextSwitchTo(MessageContext);

	portal = GetPortalByName(portal_name);
	if (!PortalIsValid(portal))
		ereport(ERROR,
				(errcode(ERRCODE_UNDEFINED_CURSOR),
				 errmsg("portal \"%s\" does not exist", portal_name)));

	/*
	 * If we are in aborted transaction state, we can't run
	 * SendRowDescriptionMessage(), because that needs catalog accesses.
	 * Hence, refuse to Describe portals that return data.  (We shouldn't just
	 * refuse all Describes, since that might break the ability of some
	 * clients to issue COMMIT or ROLLBACK commands, if they use code that
	 * blindly Describes whatever it does.)
	 */
	if (IsAbortedTransactionBlockState() &&
		portal->tupDesc)
		ereport(ERROR,
				(errcode(ERRCODE_IN_FAILED_SQL_TRANSACTION),
				 errmsg("current transaction is aborted, "
						"commands ignored until end of transaction block")));

	if (whereToSendOutput != DestRemote)
		return;					/* can't actually do anything... */

	if (portal->tupDesc)
		SendRowDescriptionMessage(portal->tupDesc,
								  FetchPortalTargetList(portal),
								  portal->formats);
	else
		pq_putemptymessage('n');	/* NoData */
}


/*
 * Convenience routines for starting/committing a single command.
 */
static void
start_xact_command(void)
{
	if (!xact_started)
	{
		ereport(DEBUG3,
				(errmsg_internal("StartTransactionCommand")));
		StartTransactionCommand();

		/* Set statement timeout running, if any */
		if (StatementTimeout > 0)
			enable_sig_alarm(StatementTimeout, true);
		else
			cancel_from_timeout = false;

		xact_started = true;
	}
}

static void
finish_xact_command(void)
{
	if (xact_started)
	{
		/* Cancel any active statement timeout before committing */
		disable_sig_alarm(true);

		/* Now commit the command */
		ereport(DEBUG3,
				(errmsg_internal("CommitTransactionCommand")));

		CommitTransactionCommand();

#ifdef MEMORY_CONTEXT_CHECKING
		/* Check all memory contexts that weren't freed during commit */
		/* (those that were, were checked before being deleted) */
		MemoryContextCheck(TopMemoryContext);
#endif

#ifdef SHOW_MEMORY_STATS
		/* Print mem stats after each commit for leak tracking */
		if (ShowStats)
			MemoryContextStats(TopMemoryContext);
#endif

		xact_started = false;
	}
}


/*
 * Convenience routines for checking whether a statement is one of the
 * ones that we allow in transaction-aborted state.
 */

static bool
IsTransactionExitStmt(Node *parsetree)
{
	if (parsetree && IsA(parsetree, TransactionStmt))
	{
		TransactionStmt *stmt = (TransactionStmt *) parsetree;

		if (stmt->kind == TRANS_STMT_COMMIT ||
			stmt->kind == TRANS_STMT_PREPARE ||
			stmt->kind == TRANS_STMT_ROLLBACK ||
			stmt->kind == TRANS_STMT_ROLLBACK_TO)
			return true;
	}
	return false;
}

static bool
IsTransactionExitStmtList(List *parseTrees)
{
	if (list_length(parseTrees) == 1)
	{
		Query	   *query = (Query *) linitial(parseTrees);

		if (query->commandType == CMD_UTILITY &&
			IsTransactionExitStmt(query->utilityStmt))
			return true;
	}
	return false;
}

static bool
IsTransactionStmtList(List *parseTrees)
{
	if (list_length(parseTrees) == 1)
	{
		Query	   *query = (Query *) linitial(parseTrees);

		if (query->commandType == CMD_UTILITY &&
			query->utilityStmt && IsA(query->utilityStmt, TransactionStmt))
			return true;
	}
	return false;
}


/* --------------------------------
 *		signal handler routines used in PostgresMain()
 * --------------------------------
 */

/*
 * quickdie() occurs when signalled SIGQUIT by the postmaster.
 *
 * Some backend has bought the farm,
 * so we need to stop what we're doing and exit.
 */
void
quickdie(SIGNAL_ARGS)
{
	PG_SETMASK(&BlockSig);

	/*
	 * Ideally this should be ereport(FATAL), but then we'd not get control
	 * back...
	 */
	ereport(WARNING,
			(errcode(ERRCODE_CRASH_SHUTDOWN),
			 errmsg("terminating connection because of crash of another server process"),
	errdetail("The postmaster has commanded this server process to roll back"
			  " the current transaction and exit, because another"
			  " server process exited abnormally and possibly corrupted"
			  " shared memory."),
			 errhint("In a moment you should be able to reconnect to the"
					 " database and repeat your command.")));

	/*
	 * DO NOT proc_exit() -- we're here because shared memory may be
	 * corrupted, so we don't want to try to clean up our transaction. Just
	 * nail the windows shut and get out of town.
	 *
	 * Note we do exit(1) not exit(0).	This is to force the postmaster into a
	 * system reset cycle if some idiot DBA sends a manual SIGQUIT to a random
	 * backend.  This is necessary precisely because we don't clean up our
	 * shared memory state.
	 */
	exit(1);
}

/*
 * Shutdown signal from postmaster: abort transaction and exit
 * at soonest convenient time
 */
void
die(SIGNAL_ARGS)
{
	int			save_errno = errno;

	/* Don't joggle the elbow of proc_exit */
	if (!proc_exit_inprogress)
	{
		InterruptPending = true;
		ProcDiePending = true;

		/*
		 * If it's safe to interrupt, and we're waiting for input or a lock,
		 * service the interrupt immediately
		 */
		if (ImmediateInterruptOK && InterruptHoldoffCount == 0 &&
			CritSectionCount == 0)
		{
			/* bump holdoff count to make ProcessInterrupts() a no-op */
			/* until we are done getting ready for it */
			InterruptHoldoffCount++;
			DisableNotifyInterrupt();
			DisableCatchupInterrupt();
			/* Make sure CheckDeadLock won't run while shutting down... */
			LockWaitCancel();
			InterruptHoldoffCount--;
			ProcessInterrupts();
		}
	}

	errno = save_errno;
}

/*
 * Timeout or shutdown signal from postmaster during client authentication.
 * Simply exit(0).
 *
 * XXX: possible future improvement: try to send a message indicating
 * why we are disconnecting.  Problem is to be sure we don't block while
 * doing so, nor mess up the authentication message exchange.
 */
void
authdie(SIGNAL_ARGS)
{
	exit(0);
}

/*
 * Query-cancel signal from postmaster: abort current transaction
 * at soonest convenient time
 */
void
StatementCancelHandler(SIGNAL_ARGS)
{
	int			save_errno = errno;

	/*
	 * Don't joggle the elbow of proc_exit
	 */
	if (!proc_exit_inprogress)
	{
		InterruptPending = true;
		QueryCancelPending = true;

		/*
		 * If it's safe to interrupt, and we're waiting for a lock, service
		 * the interrupt immediately.  No point in interrupting if we're
		 * waiting for input, however.
		 */
		if (ImmediateInterruptOK && InterruptHoldoffCount == 0 &&
			CritSectionCount == 0)
		{
			/* bump holdoff count to make ProcessInterrupts() a no-op */
			/* until we are done getting ready for it */
			InterruptHoldoffCount++;
			if (LockWaitCancel())
			{
				DisableNotifyInterrupt();
				DisableCatchupInterrupt();
				InterruptHoldoffCount--;
				ProcessInterrupts();
			}
			else
				InterruptHoldoffCount--;
		}
	}

	errno = save_errno;
}

/* signal handler for floating point exception */
void
FloatExceptionHandler(SIGNAL_ARGS)
{
	ereport(ERROR,
			(errcode(ERRCODE_FLOATING_POINT_EXCEPTION),
			 errmsg("floating-point exception"),
			 errdetail("An invalid floating-point operation was signaled. "
					   "This probably means an out-of-range result or an "
					   "invalid operation, such as division by zero.")));
}

/* SIGHUP: set flag to re-read config file at next convenient time */
static void
SigHupHandler(SIGNAL_ARGS)
{
	got_SIGHUP = true;
}


/*
 * ProcessInterrupts: out-of-line portion of CHECK_FOR_INTERRUPTS() macro
 *
 * If an interrupt condition is pending, and it's safe to service it,
 * then clear the flag and accept the interrupt.  Called only when
 * InterruptPending is true.
 */
void
ProcessInterrupts(void)
{
	/* OK to accept interrupt now? */
	if (InterruptHoldoffCount != 0 || CritSectionCount != 0)
		return;
	InterruptPending = false;
	if (ProcDiePending)
	{
		ProcDiePending = false;
		QueryCancelPending = false;		/* ProcDie trumps QueryCancel */
		ImmediateInterruptOK = false;	/* not idle anymore */
		DisableNotifyInterrupt();
		DisableCatchupInterrupt();
		ereport(FATAL,
				(errcode(ERRCODE_ADMIN_SHUTDOWN),
			 errmsg("terminating connection due to administrator command")));
	}
	if (QueryCancelPending)
	{
		QueryCancelPending = false;
		ImmediateInterruptOK = false;	/* not idle anymore */
		DisableNotifyInterrupt();
		DisableCatchupInterrupt();
		if (cancel_from_timeout)
			ereport(ERROR,
					(errcode(ERRCODE_QUERY_CANCELED),
					 errmsg("canceling statement due to statement timeout")));
		else
			ereport(ERROR,
					(errcode(ERRCODE_QUERY_CANCELED),
					 errmsg("canceling statement due to user request")));
	}
	/* If we get here, do nothing (probably, QueryCancelPending was reset) */
}


/*
 * check_stack_depth: check for excessively deep recursion
 *
 * This should be called someplace in any recursive routine that might possibly
 * recurse deep enough to overflow the stack.  Most Unixen treat stack
 * overflow as an unrecoverable SIGSEGV, so we want to error out ourselves
 * before hitting the hardware limit.  Unfortunately we have no direct way
 * to detect the hardware limit, so we have to rely on the admin to set a
 * GUC variable for it ...
 */
void
check_stack_depth(void)
{
	char		stack_top_loc;
	int			stack_depth;

	/*
	 * Compute distance from PostgresMain's local variables to my own
	 *
	 * Note: in theory stack_depth should be ptrdiff_t or some such, but since
	 * the whole point of this code is to bound the value to something much
	 * less than integer-sized, int should work fine.
	 */
	stack_depth = (int) (stack_base_ptr - &stack_top_loc);

	/*
	 * Take abs value, since stacks grow up on some machines, down on others
	 */
	if (stack_depth < 0)
		stack_depth = -stack_depth;

	/*
	 * Trouble?
	 *
	 * The test on stack_base_ptr prevents us from erroring out if called
	 * during process setup or in a non-backend process.  Logically it should
	 * be done first, but putting it here avoids wasting cycles during normal
	 * cases.
	 */
	if (stack_depth > max_stack_depth_bytes &&
		stack_base_ptr != NULL)
	{
		ereport(ERROR,
				(errcode(ERRCODE_STATEMENT_TOO_COMPLEX),
				 errmsg("stack depth limit exceeded"),
				 errhint("Increase the configuration parameter \"max_stack_depth\".")));
	}
}

/* GUC assign hook to update max_stack_depth_bytes from max_stack_depth */
bool
assign_max_stack_depth(int newval, bool doit, GucSource source)
{
	/* Range check was already handled by guc.c */
	if (doit)
		max_stack_depth_bytes = newval * 1024;
	return true;
}


static void
usage(const char *progname)
{
	printf(_("%s is the PostgreSQL stand-alone backend.  It is not\nintended to be used by normal users.\n\n"), progname);

	printf(_("Usage:\n  %s [OPTION]... DBNAME\n\n"), progname);
	printf(_("Options:\n"));
#ifdef USE_ASSERT_CHECKING
	printf(_("  -A 1|0          enable/disable run-time assert checking\n"));
#endif
	printf(_("  -B NBUFFERS     number of shared buffers\n"));
	printf(_("  -c NAME=VALUE   set run-time parameter\n"));
	printf(_("  -d 0-5          debugging level\n"));
	printf(_("  -D DATADIR      database directory\n"));
	printf(_("  -e              use European date input format (DMY)\n"));
	printf(_("  -E              echo statement before execution\n"));
	printf(_("  -F              turn fsync off\n"));
	printf(_("  -j              do not use newline as interactive query delimiter\n"));
	printf(_("  -r FILENAME     send stdout and stderr to given file\n"));
	printf(_("  -s              show statistics after each query\n"));
	printf(_("  -S WORK-MEM     set amount of memory for sorts (in kB)\n"));
	printf(_("  --NAME=VALUE    set run-time parameter\n"));
	printf(_("  --describe-config  describe configuration parameters, then exit\n"));
	printf(_("  --help          show this help, then exit\n"));
	printf(_("  --version       output version information, then exit\n"));
	printf(_("\nDeveloper options:\n"));
	printf(_("  -f s|i|n|m|h    forbid use of some plan types\n"));
	printf(_("  -O              allow system table structure changes\n"));
	printf(_("  -P              disable system indexes\n"));
	printf(_("  -t pa|pl|ex     show timings after each query\n"));
	printf(_("  -W NUM          wait NUM seconds to allow attach from a debugger\n"));
	printf(_("\nReport bugs to <pgsql-bugs@postgresql.org>.\n"));
}


/*
 * set_debug_options --- apply "-d N" command line option
 *
 * -d is not quite the same as setting log_min_messages because it enables
 * other output options.
 */
void
set_debug_options(int debug_flag, GucContext context, GucSource source)
{
	if (debug_flag > 0)
	{
		char		debugstr[64];

		sprintf(debugstr, "debug%d", debug_flag);
		SetConfigOption("log_min_messages", debugstr, context, source);
	}
	else
		SetConfigOption("log_min_messages", "notice", context, source);

	if (debug_flag >= 1 && context == PGC_POSTMASTER)
	{
		SetConfigOption("log_connections", "true", context, source);
		SetConfigOption("log_disconnections", "true", context, source);
	}
	if (debug_flag >= 2)
		SetConfigOption("log_statement", "all", context, source);
	if (debug_flag >= 3)
		SetConfigOption("debug_print_parse", "true", context, source);
	if (debug_flag >= 4)
		SetConfigOption("debug_print_plan", "true", context, source);
	if (debug_flag >= 5)
		SetConfigOption("debug_print_rewritten", "true", context, source);
}


bool
set_plan_disabling_options(const char *arg, GucContext context, GucSource source)
{
	char *tmp = NULL;

	switch (arg[0])
	{
		case 's':	/* seqscan */
			tmp = "enable_seqscan";
			break;
		case 'i':	/* indexscan */
			tmp = "enable_indexscan";
			break;
		case 'b':	/* bitmapscan */
			tmp = "enable_bitmapscan";
			break;
		case 't':	/* tidscan */
			tmp = "enable_tidscan";
			break;
		case 'n':	/* nestloop */
			tmp = "enable_nestloop";
			break;
		case 'm':	/* mergejoin */
			tmp = "enable_mergejoin";
			break;
		case 'h':	/* hashjoin */
			tmp = "enable_hashjoin";
			break;
	}
	if (tmp)
	{
		SetConfigOption(tmp, "false", context, source);
		return true;
	}
	else
		return false;
}


const char *
get_stats_option_name(const char *arg)
{
	switch (arg[0])
	{
		case 'p':
			if (optarg[1] == 'a') /* "parser" */
				return "log_parser_stats";
			else if (optarg[1] == 'l') /* "planner" */
				return "log_planner_stats";
			break;

		case 'e':	/* "executor" */
			return "log_executor_stats";
			break;
	}

	return NULL;
}


/* ----------------------------------------------------------------
 * PostgresMain
 *	   postgres main loop -- all backends, interactive or otherwise start here
 *
 * argc/argv are the command line arguments to be used.  (When being forked
 * by the postmaster, these are not the original argv array of the process.)
 * username is the (possibly authenticated) PostgreSQL user name to be used
 * for the session.
 * ----------------------------------------------------------------
 */
int
PostgresMain(int argc, char *argv[], const char *username)
{
	int			flag;
	const char *dbname = NULL;
	char	   *userDoption = NULL;
	bool		secure;
	int			errs = 0;
	int			debug_flag = -1;	/* -1 means not given */
	List	   *guc_names = NIL;	/* for SUSET options */
	List	   *guc_values = NIL;
	GucContext	ctx;
	GucSource	gucsource;
	bool		am_superuser;
	int			firstchar;
	char		stack_base;
	StringInfoData input_message;
	sigjmp_buf	local_sigjmp_buf;
	volatile bool send_ready_for_query = true;

#define PendingConfigOption(name,val) \
	(guc_names = lappend(guc_names, pstrdup(name)), \
	 guc_values = lappend(guc_values, pstrdup(val)))

	/*
	 * Catch standard options before doing much else.  This even works on
	 * systems without getopt_long.
	 */
	if (!IsUnderPostmaster && argc > 1)
	{
		if (strcmp(argv[1], "--help") == 0 || strcmp(argv[1], "-?") == 0)
		{
			usage(argv[0]);
			exit(0);
		}
		if (strcmp(argv[1], "--version") == 0 || strcmp(argv[1], "-V") == 0)
		{
			puts(PG_VERSIONSTR);
			exit(0);
		}
	}

	/*
	 * initialize globals (already done if under postmaster, but not if
	 * standalone; cheap enough to do over)
	 */
	MyProcPid = getpid();

	/*
	 * Fire up essential subsystems: error and memory management
	 *
	 * If we are running under the postmaster, this is done already.
	 */
	if (!IsUnderPostmaster)
		MemoryContextInit();

	set_ps_display("startup");

	SetProcessingMode(InitProcessing);

	/* Set up reference point for stack depth checking */
	stack_base_ptr = &stack_base;

	/* Compute paths, if we didn't inherit them from postmaster */
	if (my_exec_path[0] == '\0')
	{
		if (find_my_exec(argv[0], my_exec_path) < 0)
			elog(FATAL, "%s: could not locate my own executable path",
				 argv[0]);
	}

	if (pkglib_path[0] == '\0')
		get_pkglib_path(my_exec_path, pkglib_path);

	/*
	 * Set default values for command-line options.
	 */
	EchoQuery = false;

	if (!IsUnderPostmaster)
		InitializeGUCOptions();

	/* ----------------
	 *	parse command line arguments
	 *
	 *	There are now two styles of command line layout for the backend:
	 *
	 *	For interactive use (not started from postmaster) the format is
	 *		postgres [switches] [databasename]
	 *	If the databasename is omitted it is taken to be the user name.
	 *
	 *	When started from the postmaster, the format is
	 *		postgres [secure switches] -p databasename [insecure switches]
	 *	Switches appearing after -p came from the client (via "options"
	 *	field of connection request).  For security reasons we restrict
	 *	what these switches can do.
	 * ----------------
	 */

	/* all options are allowed until '-p' */
	secure = true;
	ctx = PGC_POSTMASTER;
	gucsource = PGC_S_ARGV;		/* initial switches came from command line */

	while ((flag = getopt(argc, argv, "A:B:c:D:d:EeFf:h:ijk:lN:nOo:Pp:r:S:sTt:v:W:y:-:")) != -1)
	{
		switch (flag)
		{
			case 'A':
				SetConfigOption("debug_assertions", optarg, ctx, gucsource);
				break;

			case 'B':
				SetConfigOption("shared_buffers", optarg, ctx, gucsource);
				break;

			case 'D':
				if (secure)
					userDoption = optarg;
				break;

			case 'd':
				debug_flag = atoi(optarg);
				break;

			case 'E':
				EchoQuery = true;
				break;

			case 'e':
				SetConfigOption("datestyle", "euro", ctx, gucsource);
				break;

			case 'F':
				SetConfigOption("fsync", "false", ctx, gucsource);
				break;

			case 'f':
				if (!set_plan_disabling_options(optarg, ctx, gucsource))
					errs++;
				break;

			case 'h':
				SetConfigOption("listen_addresses", optarg, ctx, gucsource);
				break;

			case 'i':
				SetConfigOption("listen_addresses", "*", ctx, gucsource);
				break;

			case 'j':
				UseNewLine = 0;
				break;

			case 'k':
				SetConfigOption("unix_socket_directory", optarg, ctx, gucsource);
				break;

			case 'l':
				SetConfigOption("ssl", "true", ctx, gucsource);
				break;

			case 'N':
				SetConfigOption("max_connections", optarg, ctx, gucsource);
				break;

			case 'n':
				/* ignored for consistency with postmaster */
				break;

			case 'O':
				SetConfigOption("allow_system_table_mods", "true", ctx, gucsource);
				break;

			case 'o':
				errs++;
				break;

			case 'P':
				SetConfigOption("ignore_system_indexes", "true", ctx, gucsource);
				break;

			case 'p':
				SetConfigOption("port", optarg, ctx, gucsource);
				break;

			case 'r':
				/* send output (stdout and stderr) to the given file */
				if (secure)
					StrNCpy(OutputFileName, optarg, MAXPGPATH);
				break;

			case 'S':
				SetConfigOption("work_mem", optarg, ctx, gucsource);
				break;

			case 's':
				/*
				 * Since log options are SUSET, we need to postpone unless
				 * still in secure context
				 */
				if (ctx == PGC_BACKEND)
					PendingConfigOption("log_statement_stats", "true");
				else
					SetConfigOption("log_statement_stats", "true",
									ctx, gucsource);
				break;

			case 'T':
				/* ignored for consistency with postmaster */
				break;

			case 't':
			{
				const char *tmp = get_stats_option_name(optarg);
				if (tmp)
				{
					if (ctx == PGC_BACKEND)
						PendingConfigOption(tmp, "true");
					else
						SetConfigOption(tmp, "true", ctx, gucsource);
				}
				else
					errs++;
				break;
			}

			case 'v':
				if (secure)
					FrontendProtocol = (ProtocolVersion) atoi(optarg);
				break;

			case 'W':
				SetConfigOption("post_auth_delay", optarg, ctx, gucsource);
				break;


			case 'y':
				/*
				 * y - special flag passed if backend was forked by a
				 * postmaster.
				 */
				if (secure)
				{
					dbname = strdup(optarg);

					secure = false;		/* subsequent switches are NOT secure */
					ctx = PGC_BACKEND;
					gucsource = PGC_S_CLIENT;
				}
				break;

			case 'c':
			case '-':
				{
					char	   *name,
							   *value;

					ParseLongOption(optarg, &name, &value);
					if (!value)
					{
						if (flag == '-')
							ereport(ERROR,
									(errcode(ERRCODE_SYNTAX_ERROR),
									 errmsg("--%s requires a value",
											optarg)));
						else
							ereport(ERROR,
									(errcode(ERRCODE_SYNTAX_ERROR),
									 errmsg("-c %s requires a value",
											optarg)));
					}

					/*
					 * If a SUSET option, must postpone evaluation, unless we
					 * are still reading secure switches.
					 */
					if (ctx == PGC_BACKEND && IsSuperuserConfigOption(name))
						PendingConfigOption(name, value);
					else
						SetConfigOption(name, value, ctx, gucsource);
					free(name);
					if (value)
						free(value);
					break;
				}

			default:
				errs++;
				break;
		}
	}

	/*
	 * Process any additional GUC variable settings passed in startup packet.
	 * These are handled exactly like command-line variables.
	 */
	if (MyProcPort != NULL)
	{
		ListCell   *gucopts = list_head(MyProcPort->guc_options);

		while (gucopts)
		{
			char	   *name;
			char	   *value;

			name = lfirst(gucopts);
			gucopts = lnext(gucopts);

			value = lfirst(gucopts);
			gucopts = lnext(gucopts);

			if (IsSuperuserConfigOption(name))
				PendingConfigOption(name, value);
			else
				SetConfigOption(name, value, PGC_BACKEND, PGC_S_CLIENT);
		}
	}

	/* Acquire configuration parameters, unless inherited from postmaster */
	if (!IsUnderPostmaster)
	{
		if (!SelectConfigFiles(userDoption, argv[0]))
			proc_exit(1);
		/* If timezone is not set, determine what the OS uses */
		pg_timezone_initialize();
	}

	if (PostAuthDelay)
		pg_usleep(PostAuthDelay * 1000000L);

	/*
	 * Set up signal handlers and masks.
	 *
	 * Note that postmaster blocked all signals before forking child process,
	 * so there is no race condition whereby we might receive a signal before
	 * we have set up the handler.
	 *
	 * Also note: it's best not to use any signals that are SIG_IGNored in the
	 * postmaster.	If such a signal arrives before we are able to change the
	 * handler to non-SIG_IGN, it'll get dropped.  Instead, make a dummy
	 * handler in the postmaster to reserve the signal. (Of course, this isn't
	 * an issue for signals that are locally generated, such as SIGALRM and
	 * SIGPIPE.)
	 */
	pqsignal(SIGHUP, SigHupHandler);	/* set flag to read config file */
	pqsignal(SIGINT, StatementCancelHandler);	/* cancel current query */
	pqsignal(SIGTERM, die);		/* cancel current query and exit */
	pqsignal(SIGQUIT, quickdie);	/* hard crash time */
	pqsignal(SIGALRM, handle_sig_alarm);		/* timeout conditions */

	/*
	 * Ignore failure to write to frontend. Note: if frontend closes
	 * connection, we will notice it and exit cleanly when control next
	 * returns to outer loop.  This seems safer than forcing exit in the midst
	 * of output during who-knows-what operation...
	 */
	pqsignal(SIGPIPE, SIG_IGN);
	pqsignal(SIGUSR1, CatchupInterruptHandler);
	pqsignal(SIGUSR2, NotifyInterruptHandler);
	pqsignal(SIGFPE, FloatExceptionHandler);

	/*
	 * Reset some signals that are accepted by postmaster but not by backend
	 */
	pqsignal(SIGCHLD, SIG_DFL); /* system() requires this on some platforms */

	pqinitmask();

	/* We allow SIGQUIT (quickdie) at all times */
#ifdef HAVE_SIGPROCMASK
	sigdelset(&BlockSig, SIGQUIT);
#else
	BlockSig &= ~(sigmask(SIGQUIT));
#endif

	PG_SETMASK(&BlockSig);		/* block everything except SIGQUIT */

	if (IsUnderPostmaster)
	{
		/* noninteractive case: nothing should be left after switches */
		if (errs || argc != optind || dbname == NULL)
		{
			ereport(FATAL,
					(errcode(ERRCODE_SYNTAX_ERROR),
				 errmsg("invalid command-line arguments for server process"),
			   errhint("Try \"%s --help\" for more information.", argv[0])));
		}

		BaseInit();
	}
	else
	{
		/* interactive case: database name can be last arg on command line */
		if (errs || argc - optind > 1)
		{
			ereport(FATAL,
					(errcode(ERRCODE_SYNTAX_ERROR),
					 errmsg("%s: invalid command-line arguments",
							argv[0]),
			   errhint("Try \"%s --help\" for more information.", argv[0])));
		}
		else if (argc - optind == 1)
			dbname = argv[optind];
		else if ((dbname = username) == NULL)
		{
			ereport(FATAL,
					(errcode(ERRCODE_INVALID_PARAMETER_VALUE),
					 errmsg("%s: no database nor user name specified",
							argv[0])));
		}

		/*
		 * Validate we have been given a reasonable-looking DataDir (if under
		 * postmaster, assume postmaster did this already).
		 */
		Assert(DataDir);
		ValidatePgVersion(DataDir);

		/* Change into DataDir (if under postmaster, was done already) */
		ChangeToDataDir();

		/*
		 * Create lockfile for data directory.
		 */
		CreateDataDirLockFile(false);

		BaseInit();

		/*
		 * Start up xlog for standalone backend, and register to have it
		 * closed down at exit.
		 */
		StartupXLOG();
		on_shmem_exit(ShutdownXLOG, 0);

		/*
		 * Read any existing FSM cache file, and register to write one out at
		 * exit.
		 */
		LoadFreeSpaceMap();
		on_shmem_exit(DumpFreeSpaceMap, 0);

		/*
		 * We have to build the flat file for pg_database, but not for the
		 * user and group tables, since we won't try to do authentication.
		 */
		BuildFlatFiles(true);
	}

	/*
	 * Create a per-backend PGPROC struct in shared memory, except in
	 * the EXEC_BACKEND case where this was done in SubPostmasterMain.
	 * We must do this before we can use LWLocks (and in the EXEC_BACKEND
	 * case we already had to do some stuff with LWLocks).
	 */
#ifdef EXEC_BACKEND
	if (!IsUnderPostmaster)
		InitProcess();
#else
	InitProcess();
#endif

	/*
	 * General initialization.
	 *
	 * NOTE: if you are tempted to add code in this vicinity, consider putting
	 * it inside InitPostgres() instead.  In particular, anything that
	 * involves database access should be there, not here.
	 */
	ereport(DEBUG3,
			(errmsg_internal("InitPostgres")));
	am_superuser = InitPostgres(dbname, username);

	SetProcessingMode(NormalProcessing);

	/*
	 * Now that we know if client is a superuser, we can try to apply SUSET
	 * GUC options that came from the client.
	 */
	ctx = am_superuser ? PGC_SUSET : PGC_USERSET;

	if (debug_flag >= 0)
		set_debug_options(debug_flag, ctx, PGC_S_CLIENT);

	if (guc_names != NIL)
	{
		ListCell   *namcell,
				   *valcell;

		forboth(namcell, guc_names, valcell, guc_values)
		{
			char	   *name = (char *) lfirst(namcell);
			char	   *value = (char *) lfirst(valcell);

			SetConfigOption(name, value, ctx, PGC_S_CLIENT);
			pfree(name);
			pfree(value);
		}
	}

	/*
	 * Now all GUC states are fully set up.  Report them to client if
	 * appropriate.
	 */
	BeginReportingGUCOptions();

	/*
	 * Also set up handler to log session end; we have to wait till now to be
	 * sure Log_disconnections has its final value.
	 */
	if (IsUnderPostmaster && Log_disconnections)
		on_proc_exit(log_disconnections, 0);

	/*
	 * Send this backend's cancellation info to the frontend.
	 */
	if (whereToSendOutput == DestRemote &&
		PG_PROTOCOL_MAJOR(FrontendProtocol) >= 2)
	{
		StringInfoData buf;

		pq_beginmessage(&buf, 'K');
		pq_sendint(&buf, (int32) MyProcPid, sizeof(int32));
		pq_sendint(&buf, (int32) MyCancelKey, sizeof(int32));
		pq_endmessage(&buf);
		/* Need not flush since ReadyForQuery will do it. */
	}

	/* Welcome banner for standalone case */
	if (whereToSendOutput == DestDebug)
		printf("\nPostgreSQL stand-alone backend %s\n", PG_VERSION);

	/*
	 * Create the memory context we will use in the main loop.
	 *
	 * MessageContext is reset once per iteration of the main loop, ie, upon
	 * completion of processing of each command message from the client.
	 */
	MessageContext = AllocSetContextCreate(TopMemoryContext,
										   "MessageContext",
										   ALLOCSET_DEFAULT_MINSIZE,
										   ALLOCSET_DEFAULT_INITSIZE,
										   ALLOCSET_DEFAULT_MAXSIZE);

	/*
	 * Remember stand-alone backend startup time
	 */
	if (!IsUnderPostmaster)
		PgStartTime = GetCurrentTimestamp();

	/*
	 * POSTGRES main processing loop begins here
	 *
	 * If an exception is encountered, processing resumes here so we abort the
	 * current transaction and start a new one.
	 *
	 * You might wonder why this isn't coded as an infinite loop around a
	 * PG_TRY construct.  The reason is that this is the bottom of the
	 * exception stack, and so with PG_TRY there would be no exception handler
	 * in force at all during the CATCH part.  By leaving the outermost setjmp
	 * always active, we have at least some chance of recovering from an error
	 * during error recovery.  (If we get into an infinite loop thereby, it
	 * will soon be stopped by overflow of elog.c's internal state stack.)
	 */

	if (sigsetjmp(local_sigjmp_buf, 1) != 0)
	{
		/*
		 * NOTE: if you are tempted to add more code in this if-block,
		 * consider the high probability that it should be in
		 * AbortTransaction() instead.	The only stuff done directly here
		 * should be stuff that is guaranteed to apply *only* for outer-level
		 * error recovery, such as adjusting the FE/BE protocol status.
		 */

		/* Since not using PG_TRY, must reset error stack by hand */
		error_context_stack = NULL;

		/* Prevent interrupts while cleaning up */
		HOLD_INTERRUPTS();

		/*
		 * Forget any pending QueryCancel request, since we're returning to
		 * the idle loop anyway, and cancel the statement timer if running.
		 */
		QueryCancelPending = false;
		disable_sig_alarm(true);
		QueryCancelPending = false;		/* again in case timeout occurred */

		/*
		 * Turn off these interrupts too.  This is only needed here and not in
		 * other exception-catching places since these interrupts are only
		 * enabled while we wait for client input.
		 */
		DoingCommandRead = false;
		DisableNotifyInterrupt();
		DisableCatchupInterrupt();

		/* Make sure libpq is in a good state */
		pq_comm_reset();

		/* Report the error to the client and/or server log */
		EmitErrorReport();

		/*
		 * Make sure debug_query_string gets reset before we possibly clobber
		 * the storage it points at.
		 */
		debug_query_string = NULL;

		/*
		 * Abort the current transaction in order to recover.
		 */
		AbortCurrentTransaction();

		/*
		 * Now return to normal top-level context and clear ErrorContext for
		 * next time.
		 */
		MemoryContextSwitchTo(TopMemoryContext);
		FlushErrorState();
		QueryContext = NULL;

		/*
		 * If we were handling an extended-query-protocol message, initiate
		 * skip till next Sync.  This also causes us not to issue
		 * ReadyForQuery (until we get Sync).
		 */
		if (doing_extended_query_message)
			ignore_till_sync = true;

		/* We don't have a transaction command open anymore */
		xact_started = false;

		/* Now we can allow interrupts again */
		RESUME_INTERRUPTS();
	}

	/* We can now handle ereport(ERROR) */
	PG_exception_stack = &local_sigjmp_buf;

	PG_SETMASK(&UnBlockSig);

	if (!ignore_till_sync)
		send_ready_for_query = true;		/* initially, or after error */

	/*
	 * Non-error queries loop here.
	 */

	for (;;)
	{
		/*
		 * At top of loop, reset extended-query-message flag, so that any
		 * errors encountered in "idle" state don't provoke skip.
		 */
		doing_extended_query_message = false;

		/*
		 * Release storage left over from prior query cycle, and create a new
		 * query input buffer in the cleared MessageContext.
		 */
		MemoryContextSwitchTo(MessageContext);
		MemoryContextResetAndDeleteChildren(MessageContext);

		initStringInfo(&input_message);

		/*
		 * (1) If we've reached idle state, tell the frontend we're ready for
		 * a new query.
		 *
		 * Note: this includes fflush()'ing the last of the prior output.
		 *
		 * This is also a good time to send collected statistics to the
		 * collector, and to update the PS stats display.  We avoid doing
		 * those every time through the message loop because it'd slow down
		 * processing of batched messages, and because we don't want to report
		 * uncommitted updates (that confuses autovacuum).
		 */
		if (send_ready_for_query)
		{
			if (IsTransactionOrTransactionBlock())
			{
				set_ps_display("idle in transaction");
				pgstat_report_activity("<IDLE> in transaction");
			}
			else
			{
				pgstat_report_tabstat();

				set_ps_display("idle");
				pgstat_report_activity("<IDLE>");
			}

			ReadyForQuery(whereToSendOutput);
			send_ready_for_query = false;
		}

		/*
		 * (2) Allow asynchronous signals to be executed immediately if they
		 * come in while we are waiting for client input. (This must be
		 * conditional since we don't want, say, reads on behalf of COPY FROM
		 * STDIN doing the same thing.)
		 */
		QueryCancelPending = false;		/* forget any earlier CANCEL signal */
		DoingCommandRead = true;

		/*
		 * (3) read a command (loop blocks here)
		 */
		firstchar = ReadCommand(&input_message);

		/*
		 * (4) disable async signal conditions again.
		 */
		DoingCommandRead = false;

		/*
		 * (5) check for any other interesting events that happened while we
		 * slept.
		 */
		if (got_SIGHUP)
		{
			got_SIGHUP = false;
			ProcessConfigFile(PGC_SIGHUP);
		}

		/*
		 * (6) process the command.  But ignore it if we're skipping till
		 * Sync.
		 */
		if (ignore_till_sync && firstchar != EOF)
			continue;

		switch (firstchar)
		{
			case 'Q':			/* simple query */
				{
					const char *query_string;

					query_string = pq_getmsgstring(&input_message);
					pq_getmsgend(&input_message);

					exec_simple_query(query_string);

					send_ready_for_query = true;
				}
				break;

			case 'P':			/* parse */
				{
					const char *stmt_name;
					const char *query_string;
					int			numParams;
					Oid		   *paramTypes = NULL;

					stmt_name = pq_getmsgstring(&input_message);
					query_string = pq_getmsgstring(&input_message);
					numParams = pq_getmsgint(&input_message, 2);
					if (numParams > 0)
					{
						int			i;

						paramTypes = (Oid *) palloc(numParams * sizeof(Oid));
						for (i = 0; i < numParams; i++)
							paramTypes[i] = pq_getmsgint(&input_message, 4);
					}
					pq_getmsgend(&input_message);

					exec_parse_message(query_string, stmt_name,
									   paramTypes, numParams);
				}
				break;

			case 'B':			/* bind */

				/*
				 * this message is complex enough that it seems best to put
				 * the field extraction out-of-line
				 */
				exec_bind_message(&input_message);
				break;

			case 'E':			/* execute */
				{
					const char *portal_name;
					int			max_rows;

					portal_name = pq_getmsgstring(&input_message);
					max_rows = pq_getmsgint(&input_message, 4);
					pq_getmsgend(&input_message);

					exec_execute_message(portal_name, max_rows);
				}
				break;

			case 'F':			/* fastpath function call */
				/* Tell the collector what we're doing */
				pgstat_report_activity("<FASTPATH> function call");

				/* start an xact for this function invocation */
				start_xact_command();

				/* switch back to message context */
				MemoryContextSwitchTo(MessageContext);

				/* set snapshot in case function needs one */
				ActiveSnapshot = CopySnapshot(GetTransactionSnapshot());

				if (HandleFunctionRequest(&input_message) == EOF)
				{
					/* lost frontend connection during F message input */

					/*
					 * Reset whereToSendOutput to prevent ereport from
					 * attempting to send any more messages to client.
					 */
					if (whereToSendOutput == DestRemote)
						whereToSendOutput = DestNone;

					proc_exit(0);
				}

				/* commit the function-invocation transaction */
				finish_xact_command();

				send_ready_for_query = true;
				break;

			case 'C':			/* close */
				{
					int			close_type;
					const char *close_target;

					close_type = pq_getmsgbyte(&input_message);
					close_target = pq_getmsgstring(&input_message);
					pq_getmsgend(&input_message);

					switch (close_type)
					{
						case 'S':
							if (close_target[0] != '\0')
								DropPreparedStatement(close_target, false);
							else
							{
								/* special-case the unnamed statement */
								unnamed_stmt_pstmt = NULL;
								if (unnamed_stmt_context)
								{
									DropDependentPortals(unnamed_stmt_context);
									MemoryContextDelete(unnamed_stmt_context);
								}
								unnamed_stmt_context = NULL;
							}
							break;
						case 'P':
							{
								Portal		portal;

								portal = GetPortalByName(close_target);
								if (PortalIsValid(portal))
									PortalDrop(portal, false);
							}
							break;
						default:
							ereport(ERROR,
									(errcode(ERRCODE_PROTOCOL_VIOLATION),
								   errmsg("invalid CLOSE message subtype %d",
										  close_type)));
							break;
					}

					if (whereToSendOutput == DestRemote)
						pq_putemptymessage('3');		/* CloseComplete */
				}
				break;

			case 'D':			/* describe */
				{
					int			describe_type;
					const char *describe_target;

					describe_type = pq_getmsgbyte(&input_message);
					describe_target = pq_getmsgstring(&input_message);
					pq_getmsgend(&input_message);

					switch (describe_type)
					{
						case 'S':
							exec_describe_statement_message(describe_target);
							break;
						case 'P':
							exec_describe_portal_message(describe_target);
							break;
						default:
							ereport(ERROR,
									(errcode(ERRCODE_PROTOCOL_VIOLATION),
								errmsg("invalid DESCRIBE message subtype %d",
									   describe_type)));
							break;
					}
				}
				break;

			case 'H':			/* flush */
				pq_getmsgend(&input_message);
				if (whereToSendOutput == DestRemote)
					pq_flush();
				break;

			case 'S':			/* sync */
				pq_getmsgend(&input_message);
				finish_xact_command();
				send_ready_for_query = true;
				break;

				/*
				 * 'X' means that the frontend is closing down the socket. EOF
				 * means unexpected loss of frontend connection. Either way,
				 * perform normal shutdown.
				 */
			case 'X':
			case EOF:

				/*
				 * Reset whereToSendOutput to prevent ereport from attempting
				 * to send any more messages to client.
				 */
				if (whereToSendOutput == DestRemote)
					whereToSendOutput = DestNone;

				/*
				 * NOTE: if you are tempted to add more code here, DON'T!
				 * Whatever you had in mind to do should be set up as an
				 * on_proc_exit or on_shmem_exit callback, instead. Otherwise
				 * it will fail to be called during other backend-shutdown
				 * scenarios.
				 */
				proc_exit(0);

			case 'd':			/* copy data */
			case 'c':			/* copy done */
			case 'f':			/* copy fail */

				/*
				 * Accept but ignore these messages, per protocol spec; we
				 * probably got here because a COPY failed, and the frontend
				 * is still sending data.
				 */
				break;

			default:
				ereport(FATAL,
						(errcode(ERRCODE_PROTOCOL_VIOLATION),
						 errmsg("invalid frontend message type %d",
								firstchar)));
		}
	}							/* end of input-reading loop */

	/* can't get here because the above loop never exits */
	Assert(false);

	return 1;					/* keep compiler quiet */
}

#ifndef HAVE_GETRUSAGE
#include "rusagestub.h"
#else
#include <sys/resource.h>
#endif   /* HAVE_GETRUSAGE */

static struct rusage Save_r;
static struct timeval Save_t;

void
ResetUsage(void)
{
	getrusage(RUSAGE_SELF, &Save_r);
	gettimeofday(&Save_t, NULL);
	ResetBufferUsage();
	/* ResetTupleCount(); */
}

void
ShowUsage(const char *title)
{
	StringInfoData str;
	struct timeval user,
				sys;
	struct timeval elapse_t;
	struct rusage r;
	char	   *bufusage;

	getrusage(RUSAGE_SELF, &r);
	gettimeofday(&elapse_t, NULL);
	memcpy((char *) &user, (char *) &r.ru_utime, sizeof(user));
	memcpy((char *) &sys, (char *) &r.ru_stime, sizeof(sys));
	if (elapse_t.tv_usec < Save_t.tv_usec)
	{
		elapse_t.tv_sec--;
		elapse_t.tv_usec += 1000000;
	}
	if (r.ru_utime.tv_usec < Save_r.ru_utime.tv_usec)
	{
		r.ru_utime.tv_sec--;
		r.ru_utime.tv_usec += 1000000;
	}
	if (r.ru_stime.tv_usec < Save_r.ru_stime.tv_usec)
	{
		r.ru_stime.tv_sec--;
		r.ru_stime.tv_usec += 1000000;
	}

	/*
	 * the only stats we don't show here are for memory usage -- i can't
	 * figure out how to interpret the relevant fields in the rusage struct,
	 * and they change names across o/s platforms, anyway. if you can figure
	 * out what the entries mean, you can somehow extract resident set size,
	 * shared text size, and unshared data and stack sizes.
	 */
	initStringInfo(&str);

	appendStringInfo(&str, "! system usage stats:\n");
	appendStringInfo(&str,
				"!\t%ld.%06ld elapsed %ld.%06ld user %ld.%06ld system sec\n",
					 (long) (elapse_t.tv_sec - Save_t.tv_sec),
					 (long) (elapse_t.tv_usec - Save_t.tv_usec),
					 (long) (r.ru_utime.tv_sec - Save_r.ru_utime.tv_sec),
					 (long) (r.ru_utime.tv_usec - Save_r.ru_utime.tv_usec),
					 (long) (r.ru_stime.tv_sec - Save_r.ru_stime.tv_sec),
					 (long) (r.ru_stime.tv_usec - Save_r.ru_stime.tv_usec));
	appendStringInfo(&str,
					 "!\t[%ld.%06ld user %ld.%06ld sys total]\n",
					 (long) user.tv_sec,
					 (long) user.tv_usec,
					 (long) sys.tv_sec,
					 (long) sys.tv_usec);
#if defined(HAVE_GETRUSAGE)
	appendStringInfo(&str,
					 "!\t%ld/%ld [%ld/%ld] filesystem blocks in/out\n",
					 r.ru_inblock - Save_r.ru_inblock,
	/* they only drink coffee at dec */
					 r.ru_oublock - Save_r.ru_oublock,
					 r.ru_inblock, r.ru_oublock);
	appendStringInfo(&str,
			  "!\t%ld/%ld [%ld/%ld] page faults/reclaims, %ld [%ld] swaps\n",
					 r.ru_majflt - Save_r.ru_majflt,
					 r.ru_minflt - Save_r.ru_minflt,
					 r.ru_majflt, r.ru_minflt,
					 r.ru_nswap - Save_r.ru_nswap,
					 r.ru_nswap);
	appendStringInfo(&str,
		 "!\t%ld [%ld] signals rcvd, %ld/%ld [%ld/%ld] messages rcvd/sent\n",
					 r.ru_nsignals - Save_r.ru_nsignals,
					 r.ru_nsignals,
					 r.ru_msgrcv - Save_r.ru_msgrcv,
					 r.ru_msgsnd - Save_r.ru_msgsnd,
					 r.ru_msgrcv, r.ru_msgsnd);
	appendStringInfo(&str,
			 "!\t%ld/%ld [%ld/%ld] voluntary/involuntary context switches\n",
					 r.ru_nvcsw - Save_r.ru_nvcsw,
					 r.ru_nivcsw - Save_r.ru_nivcsw,
					 r.ru_nvcsw, r.ru_nivcsw);
#endif   /* HAVE_GETRUSAGE */

	bufusage = ShowBufferUsage();
	appendStringInfo(&str, "! buffer usage stats:\n%s", bufusage);
	pfree(bufusage);

	/* remove trailing newline */
	if (str.data[str.len - 1] == '\n')
		str.data[--str.len] = '\0';

	ereport(LOG,
			(errmsg_internal("%s", title),
			 errdetail("%s", str.data)));

	pfree(str.data);
}

/*
 * on_proc_exit handler to log end of session
 */
static void
log_disconnections(int code, Datum arg)
{
	Port	   *port = MyProcPort;
	struct timeval end;
	int			hours,
				minutes,
				seconds;

	gettimeofday(&end, NULL);
	if (end.tv_usec < port->session_start.tv_usec)
	{
		end.tv_sec--;
		end.tv_usec += 1000000;
	}
	end.tv_sec -= port->session_start.tv_sec;
	end.tv_usec -= port->session_start.tv_usec;

	/* for stricter accuracy here we could round - this is close enough */
	hours = end.tv_sec / SECS_PER_HOUR;
	end.tv_sec %= SECS_PER_HOUR;
	minutes = end.tv_sec / SECS_PER_MINUTE;
	seconds = end.tv_sec % SECS_PER_MINUTE;

	ereport(LOG,
			(errmsg("disconnection: session time: %d:%02d:%02d.%02d "
					"user=%s database=%s host=%s%s%s",
					hours, minutes, seconds, (int) (end.tv_usec / 10000),
					port->user_name, port->database_name, port->remote_host,
				  port->remote_port[0] ? " port=" : "", port->remote_port)));
}