Skip to content

R
rt-thread

dgr6878 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 5
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 9b282bd9 编写于 作者: wuyangyong's avatar wuyangyong
浏览文件
操作

change usb msc lun=2 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@324 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 736bd9fd
隐藏空白更改
内联 并排
Showing with 241 addition and 194 deletion
bsp/stm32_radio/Libraries/Mass_Storage/inc/usb_scsi.h
浏览文件 @ 9b282bd9
......@@ -86,8 +86,9 @@
#define BLKVFY 0x04
extern uint8_t Page00_Inquiry_Data[];
extern uint8_t Standard_Inquiry_Data[];
extern uint8_t Standard_Inquiry_Data1[];
extern uint8_t Standard_Inquiry_Data2[];
extern uint8_t Standard_Inquiry_Data3[];
extern uint8_t Mode_Sense6_data[];
extern uint8_t Mode_Sense10_data[];
extern uint8_t Scsi_Sense_Data[];
......
bsp/stm32_radio/Libraries/Mass_Storage/src/mass_mal.c
浏览文件 @ 9b282bd9
......@@ -21,7 +21,9 @@
uint32_t Mass_Memory_Size[3];
uint32_t Mass_Block_Size[3];
uint32_t Mass_Block_Count[3];
uint32_t Max_Lun = 0;
/* logic unit count; the first is 0 */
uint32_t Max_Lun = 2;
rt_device_t dev_sdio = RT_NULL;
......@@ -34,6 +36,12 @@ uint16_t MAL_Init(uint8_t lun)
case 0:
status = MAL_OK;
break;
case 1:
status = MAL_FAIL;
break;
case 2:
status = MAL_FAIL;
break;
default:
return MAL_FAIL;
}
......@@ -74,11 +82,24 @@ uint16_t MAL_Read(uint8_t lun, uint32_t Memory_Offset, uint32_t *Readbuff, uint1
uint16_t MAL_GetStatus (uint8_t lun)
{
switch(lun)
{
case 0:
return MAL_OK;
case 1:
return MAL_FAIL;
case 2:
return MAL_FAIL;
default:
return MAL_FAIL;
}
#if 0
if(lun == 0)
{
return MAL_OK;
}
return MAL_FAIL;
#endif
}
/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/
bsp/stm32_radio/Libraries/Mass_Storage/src/scsi_data.c
浏览文件 @ 9b282bd9
......@@ -24,7 +24,7 @@ uint8_t Page00_Inquiry_Data[] =
0x00,
0x00 /* Supported Pages 00*/
};
uint8_t Standard_Inquiry_Data[] =
uint8_t Standard_Inquiry_Data1[] =
{
0x00, /* Direct Access Device */
0x80, /* RMB = 1: Removable Medium */
......@@ -63,6 +63,26 @@ uint8_t Standard_Inquiry_Data2[] =
/* Product Revision Level */
'1', '.', '0', ' '
};
uint8_t Standard_Inquiry_Data3[] =
{
0x00, /* Direct Access Device */
0x80, /* RMB = 1: Removable Medium */
0x02, /* Version: No conformance claim to standard */
0x02, /* 数据响应格式 */
36 - 4, /* 附加数据长度，为31字节 */
0x00, /* SCCS = 1: Storage Controller Component */
0x00,
0x00,
/* Vendor Identification */
'S', 'T', 'M', '3', '2', ' ', ' ', ' ',
/* Product Identification */
'n', 'e', 't', 'r', 'a', 'd', 'i', 'o', ' ',
'D', 'I', 'S', 'K', '3', ' ', ' ',
/* Product Revision Level */
'1', '.', '0', ' '
};
/*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*/
uint8_t Mode_Sense6_data[] =
{
......
bsp/stm32_radio/Libraries/Mass_Storage/src/usb_scsi.c
浏览文件 @ 9b282bd9
......@@ -32,9 +32,11 @@ extern uint8_t Bulk_Data_Buff[BULK_MAX_PACKET_SIZE]; /* data buffer*/
extern uint8_t Bot_State;
extern Bulk_Only_CBW CBW;
extern Bulk_Only_CSW CSW;
extern uint32_t Mass_Memory_Size[2];
extern uint32_t Mass_Block_Size[2];
extern uint32_t Mass_Block_Count[2];
/* lun=3 1:SPI_FLASH 2:SD card 3:NAND-FLASH */
extern uint32_t Mass_Memory_Size[3];
extern uint32_t Mass_Block_Size[3];
extern uint32_t Mass_Block_Count[3];
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
......@@ -48,33 +50,36 @@ extern uint32_t Mass_Block_Count[2];
*******************************************************************************/
void SCSI_Inquiry_Cmd(uint8_t lun)
{
uint8_t* Inquiry_Data;
uint16_t Inquiry_Data_Length;
if (CBW.CB[1] & 0x01)/*Evpd is set*/
{
Inquiry_Data = Page00_Inquiry_Data;
Inquiry_Data_Length = 5;
}
else
{
if ( lun == 0)
uint8_t* Inquiry_Data;
uint16_t Inquiry_Data_Length;
if (CBW.CB[1] & 0x01)/*Evpd is set*/
{
Inquiry_Data = Standard_Inquiry_Data;
Inquiry_Data = Page00_Inquiry_Data;
Inquiry_Data_Length = 5;
}
else
{
Inquiry_Data = Standard_Inquiry_Data2;
}
if (CBW.CB[4] <= STANDARD_INQUIRY_DATA_LEN)
Inquiry_Data_Length = CBW.CB[4];
else
Inquiry_Data_Length = STANDARD_INQUIRY_DATA_LEN;
switch(lun)
{
case 0:
Inquiry_Data = Standard_Inquiry_Data1;
break;
case 1:
Inquiry_Data = Standard_Inquiry_Data2;
break;
case 2:
Inquiry_Data = Standard_Inquiry_Data3;
break;
}
if (CBW.CB[4] <= STANDARD_INQUIRY_DATA_LEN)
Inquiry_Data_Length = CBW.CB[4];
else
Inquiry_Data_Length = STANDARD_INQUIRY_DATA_LEN;
}
Transfer_Data_Request(Inquiry_Data, Inquiry_Data_Length);
}
Transfer_Data_Request(Inquiry_Data, Inquiry_Data_Length);
}
/*******************************************************************************
......@@ -87,22 +92,22 @@ void SCSI_Inquiry_Cmd(uint8_t lun)
void SCSI_ReadFormatCapacity_Cmd(uint8_t lun)
{
if (MAL_GetStatus(lun) != 0 )
{
Set_Scsi_Sense_Data(CBW.bLUN, NOT_READY, MEDIUM_NOT_PRESENT);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_ENABLE);
Bot_Abort(DIR_IN);
return;
}
ReadFormatCapacity_Data[4] = (uint8_t)(Mass_Block_Count[lun] >> 24);
ReadFormatCapacity_Data[5] = (uint8_t)(Mass_Block_Count[lun] >> 16);
ReadFormatCapacity_Data[6] = (uint8_t)(Mass_Block_Count[lun] >> 8);
ReadFormatCapacity_Data[7] = (uint8_t)(Mass_Block_Count[lun]);
ReadFormatCapacity_Data[9] = (uint8_t)(Mass_Block_Size[lun] >> 16);
ReadFormatCapacity_Data[10] = (uint8_t)(Mass_Block_Size[lun] >> 8);
ReadFormatCapacity_Data[11] = (uint8_t)(Mass_Block_Size[lun]);
Transfer_Data_Request(ReadFormatCapacity_Data, READ_FORMAT_CAPACITY_DATA_LEN);
if (MAL_GetStatus(lun) != 0 )
{
Set_Scsi_Sense_Data(CBW.bLUN, NOT_READY, MEDIUM_NOT_PRESENT);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_ENABLE);
Bot_Abort(DIR_IN);
return;
}
ReadFormatCapacity_Data[4] = (uint8_t)(Mass_Block_Count[lun] >> 24);
ReadFormatCapacity_Data[5] = (uint8_t)(Mass_Block_Count[lun] >> 16);
ReadFormatCapacity_Data[6] = (uint8_t)(Mass_Block_Count[lun] >> 8);
ReadFormatCapacity_Data[7] = (uint8_t)(Mass_Block_Count[lun]);
ReadFormatCapacity_Data[9] = (uint8_t)(Mass_Block_Size[lun] >> 16);
ReadFormatCapacity_Data[10] = (uint8_t)(Mass_Block_Size[lun] >> 8);
ReadFormatCapacity_Data[11] = (uint8_t)(Mass_Block_Size[lun]);
Transfer_Data_Request(ReadFormatCapacity_Data, READ_FORMAT_CAPACITY_DATA_LEN);
}
/*******************************************************************************
......@@ -115,24 +120,24 @@ void SCSI_ReadFormatCapacity_Cmd(uint8_t lun)
void SCSI_ReadCapacity10_Cmd(uint8_t lun)
{
if (MAL_GetStatus(lun))
{
Set_Scsi_Sense_Data(CBW.bLUN, NOT_READY, MEDIUM_NOT_PRESENT);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_ENABLE);
Bot_Abort(DIR_IN);
return;
}
ReadCapacity10_Data[0] = (uint8_t)(Mass_Block_Count[lun] - 1 >> 24);
ReadCapacity10_Data[1] = (uint8_t)(Mass_Block_Count[lun] - 1 >> 16);
ReadCapacity10_Data[2] = (uint8_t)(Mass_Block_Count[lun] - 1 >> 8);
ReadCapacity10_Data[3] = (uint8_t)(Mass_Block_Count[lun] - 1);
ReadCapacity10_Data[4] = (uint8_t)(Mass_Block_Size[lun] >> 24);
ReadCapacity10_Data[5] = (uint8_t)(Mass_Block_Size[lun] >> 16);
ReadCapacity10_Data[6] = (uint8_t)(Mass_Block_Size[lun] >> 8);
ReadCapacity10_Data[7] = (uint8_t)(Mass_Block_Size[lun]);
Transfer_Data_Request(ReadCapacity10_Data, READ_CAPACITY10_DATA_LEN);
if (MAL_GetStatus(lun))
{
Set_Scsi_Sense_Data(CBW.bLUN, NOT_READY, MEDIUM_NOT_PRESENT);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_ENABLE);
Bot_Abort(DIR_IN);
return;
}
ReadCapacity10_Data[0] = (uint8_t)(Mass_Block_Count[lun] - 1 >> 24);
ReadCapacity10_Data[1] = (uint8_t)(Mass_Block_Count[lun] - 1 >> 16);
ReadCapacity10_Data[2] = (uint8_t)(Mass_Block_Count[lun] - 1 >> 8);
ReadCapacity10_Data[3] = (uint8_t)(Mass_Block_Count[lun] - 1);
ReadCapacity10_Data[4] = (uint8_t)(Mass_Block_Size[lun] >> 24);
ReadCapacity10_Data[5] = (uint8_t)(Mass_Block_Size[lun] >> 16);
ReadCapacity10_Data[6] = (uint8_t)(Mass_Block_Size[lun] >> 8);
ReadCapacity10_Data[7] = (uint8_t)(Mass_Block_Size[lun]);
Transfer_Data_Request(ReadCapacity10_Data, READ_CAPACITY10_DATA_LEN);
}
/*******************************************************************************
......@@ -144,7 +149,7 @@ void SCSI_ReadCapacity10_Cmd(uint8_t lun)
*******************************************************************************/
void SCSI_ModeSense6_Cmd (uint8_t lun)
{
Transfer_Data_Request(Mode_Sense6_data, MODE_SENSE6_DATA_LEN);
Transfer_Data_Request(Mode_Sense6_data, MODE_SENSE6_DATA_LEN);
}
/*******************************************************************************
......@@ -156,7 +161,7 @@ void SCSI_ModeSense6_Cmd (uint8_t lun)
*******************************************************************************/
void SCSI_ModeSense10_Cmd (uint8_t lun)
{
Transfer_Data_Request(Mode_Sense10_data, MODE_SENSE10_DATA_LEN);
Transfer_Data_Request(Mode_Sense10_data, MODE_SENSE10_DATA_LEN);
}
/*******************************************************************************
......@@ -168,17 +173,17 @@ void SCSI_ModeSense10_Cmd (uint8_t lun)
*******************************************************************************/
void SCSI_RequestSense_Cmd (uint8_t lun)
{
uint8_t Request_Sense_data_Length;
if (CBW.CB[4] <= REQUEST_SENSE_DATA_LEN)
{
Request_Sense_data_Length = CBW.CB[4];
}
else
{
Request_Sense_data_Length = REQUEST_SENSE_DATA_LEN;
}
Transfer_Data_Request(Scsi_Sense_Data, Request_Sense_data_Length);
uint8_t Request_Sense_data_Length;
if (CBW.CB[4] <= REQUEST_SENSE_DATA_LEN)
{
Request_Sense_data_Length = CBW.CB[4];
}
else
{
Request_Sense_data_Length = REQUEST_SENSE_DATA_LEN;
}
Transfer_Data_Request(Scsi_Sense_Data, Request_Sense_data_Length);
}
/*******************************************************************************
......@@ -191,8 +196,8 @@ void SCSI_RequestSense_Cmd (uint8_t lun)
*******************************************************************************/
void Set_Scsi_Sense_Data(uint8_t lun, uint8_t Sens_Key, uint8_t Asc)
{
Scsi_Sense_Data[2] = Sens_Key;
Scsi_Sense_Data[12] = Asc;
Scsi_Sense_Data[2] = Sens_Key;
Scsi_Sense_Data[12] = Asc;
}
/*******************************************************************************
......@@ -204,7 +209,7 @@ void Set_Scsi_Sense_Data(uint8_t lun, uint8_t Sens_Key, uint8_t Asc)
*******************************************************************************/
void SCSI_Start_Stop_Unit_Cmd(uint8_t lun)
{
Set_CSW (CSW_CMD_PASSED, SEND_CSW_ENABLE);
Set_CSW (CSW_CMD_PASSED, SEND_CSW_ENABLE);
}
/*******************************************************************************
......@@ -217,31 +222,31 @@ void SCSI_Start_Stop_Unit_Cmd(uint8_t lun)
void SCSI_Read10_Cmd(uint8_t lun , uint32_t LBA , uint32_t BlockNbr)
{
if (Bot_State == BOT_IDLE)
{
/*address out of range*/
if (!(SCSI_Address_Management(CBW.bLUN, SCSI_READ10, LBA, BlockNbr)))
if (Bot_State == BOT_IDLE)
{
return;
/*address out of range*/
if (!(SCSI_Address_Management(CBW.bLUN, SCSI_READ10, LBA, BlockNbr)))
{
return;
}
if ((CBW.bmFlags & 0x80) != 0)
{
Bot_State = BOT_DATA_IN;
Read_Memory(lun, LBA , BlockNbr);
}
else
{
Bot_Abort(BOTH_DIR);
Set_Scsi_Sense_Data(CBW.bLUN, ILLEGAL_REQUEST, INVALID_FIELED_IN_COMMAND);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_ENABLE);
}
return;
}
if ((CBW.bmFlags & 0x80) != 0)
{
Bot_State = BOT_DATA_IN;
Read_Memory(lun, LBA , BlockNbr);
}
else
else if (Bot_State == BOT_DATA_IN)
{
Bot_Abort(BOTH_DIR);
Set_Scsi_Sense_Data(CBW.bLUN, ILLEGAL_REQUEST, INVALID_FIELED_IN_COMMAND);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_ENABLE);
Read_Memory(lun , LBA , BlockNbr);
}
return;
}
else if (Bot_State == BOT_DATA_IN)
{
Read_Memory(lun , LBA , BlockNbr);
}
}
/*******************************************************************************
......@@ -254,30 +259,30 @@ void SCSI_Read10_Cmd(uint8_t lun , uint32_t LBA , uint32_t BlockNbr)
void SCSI_Write10_Cmd(uint8_t lun , uint32_t LBA , uint32_t BlockNbr)
{
if (Bot_State == BOT_IDLE)
{
if (!(SCSI_Address_Management(CBW.bLUN, SCSI_WRITE10 , LBA, BlockNbr)))/*address out of range*/
if (Bot_State == BOT_IDLE)
{
return;
if (!(SCSI_Address_Management(CBW.bLUN, SCSI_WRITE10 , LBA, BlockNbr)))/*address out of range*/
{
return;
}
if ((CBW.bmFlags & 0x80) == 0)
{
Bot_State = BOT_DATA_OUT;
SetEPRxStatus(ENDP2, EP_RX_VALID);
}
else
{
Bot_Abort(DIR_IN);
Set_Scsi_Sense_Data(CBW.bLUN, ILLEGAL_REQUEST, INVALID_FIELED_IN_COMMAND);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
}
return;
}
if ((CBW.bmFlags & 0x80) == 0)
{
Bot_State = BOT_DATA_OUT;
SetEPRxStatus(ENDP2, EP_RX_VALID);
}
else
else if (Bot_State == BOT_DATA_OUT)
{
Bot_Abort(DIR_IN);
Set_Scsi_Sense_Data(CBW.bLUN, ILLEGAL_REQUEST, INVALID_FIELED_IN_COMMAND);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
Write_Memory(lun , LBA , BlockNbr);
}
return;
}
else if (Bot_State == BOT_DATA_OUT)
{
Write_Memory(lun , LBA , BlockNbr);
}
}
/*******************************************************************************
......@@ -289,16 +294,16 @@ void SCSI_Write10_Cmd(uint8_t lun , uint32_t LBA , uint32_t BlockNbr)
*******************************************************************************/
void SCSI_Verify10_Cmd(uint8_t lun)
{
if ((CBW.dDataLength == 0) && !(CBW.CB[1] & BLKVFY))/* BLKVFY not set*/
{
Set_CSW (CSW_CMD_PASSED, SEND_CSW_ENABLE);
}
else
{
Bot_Abort(BOTH_DIR);
Set_Scsi_Sense_Data(CBW.bLUN, ILLEGAL_REQUEST, INVALID_FIELED_IN_COMMAND);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
}
if ((CBW.dDataLength == 0) && !(CBW.CB[1] & BLKVFY))/* BLKVFY not set*/
{
Set_CSW (CSW_CMD_PASSED, SEND_CSW_ENABLE);
}
else
{
Bot_Abort(BOTH_DIR);
Set_Scsi_Sense_Data(CBW.bLUN, ILLEGAL_REQUEST, INVALID_FIELED_IN_COMMAND);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
}
}
/*******************************************************************************
* Function Name : SCSI_Valid_Cmd
......@@ -309,14 +314,14 @@ void SCSI_Verify10_Cmd(uint8_t lun)
*******************************************************************************/
void SCSI_Valid_Cmd(uint8_t lun)
{
if (CBW.dDataLength != 0)
{
Bot_Abort(BOTH_DIR);
Set_Scsi_Sense_Data(CBW.bLUN, ILLEGAL_REQUEST, INVALID_COMMAND);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
}
else
Set_CSW (CSW_CMD_PASSED, SEND_CSW_ENABLE);
if (CBW.dDataLength != 0)
{
Bot_Abort(BOTH_DIR);
Set_Scsi_Sense_Data(CBW.bLUN, ILLEGAL_REQUEST, INVALID_COMMAND);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
}
else
Set_CSW (CSW_CMD_PASSED, SEND_CSW_ENABLE);
}
/*******************************************************************************
* Function Name : SCSI_Valid_Cmd
......@@ -327,17 +332,17 @@ void SCSI_Valid_Cmd(uint8_t lun)
*******************************************************************************/
void SCSI_TestUnitReady_Cmd(uint8_t lun)
{
if (MAL_GetStatus(lun))
{
Set_Scsi_Sense_Data(CBW.bLUN, NOT_READY, MEDIUM_NOT_PRESENT);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_ENABLE);
Bot_Abort(DIR_IN);
return;
}
else
{
Set_CSW (CSW_CMD_PASSED, SEND_CSW_ENABLE);
}
if (MAL_GetStatus(lun))
{
Set_Scsi_Sense_Data(CBW.bLUN, NOT_READY, MEDIUM_NOT_PRESENT);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_ENABLE);
Bot_Abort(DIR_IN);
return;
}
else
{
Set_CSW (CSW_CMD_PASSED, SEND_CSW_ENABLE);
}
}
/*******************************************************************************
* Function Name : SCSI_Format_Cmd
......@@ -348,19 +353,19 @@ void SCSI_TestUnitReady_Cmd(uint8_t lun)
*******************************************************************************/
void SCSI_Format_Cmd(uint8_t lun)
{
if (MAL_GetStatus(lun))
{
Set_Scsi_Sense_Data(CBW.bLUN, NOT_READY, MEDIUM_NOT_PRESENT);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_ENABLE);
Bot_Abort(DIR_IN);
return;
}
if (MAL_GetStatus(lun))
{
Set_Scsi_Sense_Data(CBW.bLUN, NOT_READY, MEDIUM_NOT_PRESENT);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_ENABLE);
Bot_Abort(DIR_IN);
return;
}
#ifdef USE_STM3210E_EVAL
else
{
//NAND_Format();
Set_CSW (CSW_CMD_PASSED, SEND_CSW_ENABLE);
}
else
{
//NAND_Format();
Set_CSW (CSW_CMD_PASSED, SEND_CSW_ENABLE);
}
#endif
}
/*******************************************************************************
......@@ -372,23 +377,23 @@ void SCSI_Format_Cmd(uint8_t lun)
*******************************************************************************/
void SCSI_Invalid_Cmd(uint8_t lun)
{
if (CBW.dDataLength == 0)
{
Bot_Abort(DIR_IN);
}
else
{
if ((CBW.bmFlags & 0x80) != 0)
if (CBW.dDataLength == 0)
{
Bot_Abort(DIR_IN);
Bot_Abort(DIR_IN);
}
else
{
Bot_Abort(BOTH_DIR);
if ((CBW.bmFlags & 0x80) != 0)
{
Bot_Abort(DIR_IN);
}
else
{
Bot_Abort(BOTH_DIR);
}
}
}
Set_Scsi_Sense_Data(CBW.bLUN, ILLEGAL_REQUEST, INVALID_COMMAND);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
Set_Scsi_Sense_Data(CBW.bLUN, ILLEGAL_REQUEST, INVALID_COMMAND);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
}
/*******************************************************************************
......@@ -401,33 +406,33 @@ void SCSI_Invalid_Cmd(uint8_t lun)
bool SCSI_Address_Management(uint8_t lun , uint8_t Cmd , uint32_t LBA , uint32_t BlockNbr)
{
if ((LBA + BlockNbr) > Mass_Block_Count[lun] )
{
if (Cmd == SCSI_WRITE10)
if ((LBA + BlockNbr) > Mass_Block_Count[lun] )
{
Bot_Abort(BOTH_DIR);
if (Cmd == SCSI_WRITE10)
{
Bot_Abort(BOTH_DIR);
}
Bot_Abort(DIR_IN);
Set_Scsi_Sense_Data(lun, ILLEGAL_REQUEST, ADDRESS_OUT_OF_RANGE);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
return (FALSE);
}
Bot_Abort(DIR_IN);
Set_Scsi_Sense_Data(lun, ILLEGAL_REQUEST, ADDRESS_OUT_OF_RANGE);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
return (FALSE);
}
if (CBW.dDataLength != BlockNbr * Mass_Block_Size[lun])
{
if (Cmd == SCSI_WRITE10)
if (CBW.dDataLength != BlockNbr * Mass_Block_Size[lun])
{
Bot_Abort(BOTH_DIR);
if (Cmd == SCSI_WRITE10)
{
Bot_Abort(BOTH_DIR);
}
else
{
Bot_Abort(DIR_IN);
}
Set_Scsi_Sense_Data(CBW.bLUN, ILLEGAL_REQUEST, INVALID_FIELED_IN_COMMAND);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
return (FALSE);
}
else
{
Bot_Abort(DIR_IN);
}
Set_Scsi_Sense_Data(CBW.bLUN, ILLEGAL_REQUEST, INVALID_FIELED_IN_COMMAND);
Set_CSW (CSW_CMD_FAILED, SEND_CSW_DISABLE);
return (FALSE);
}
return (TRUE);
return (TRUE);
}
/******************* (C) COPYRIGHT 2009 STMicroelectronics *****END OF FILE****/
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或