Skip to content

R
rt-thread

dgr6878 / rt-thread
与 Fork 源项目一致

Fork自 RT-Thread / rt-thread

通知 5
Star 0
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 99e2020d 编写于 作者: Z zylx
浏览文件
操作

【更新】配置外设管脚，添加kconfig选项

上级 42e0ba2b
隐藏空白更改
内联 并排
Showing with 1257 addition and 40 deletion
bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/.mxproject
浏览文件 @ 99e2020d
......@@ -5,7 +5,7 @@ SourcePath=D:/rt-thread/bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/S
SourceFiles=stm32h7xx_it.c;stm32h7xx_hal_msp.c;main.c;
[PreviousLibFiles]
LibFiles=Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cortex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_crc.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_crc_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rng.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hsem.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdma.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_def.h;Drivers/STM32H7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_exti.h;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_crc.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_crc_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rng.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_gpio.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hsem.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mdma.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_exti.c;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cortex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_crc.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_crc_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rng.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hsem.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdma.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_def.h;Drivers/STM32H7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_exti.h;Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h750xx.h;Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h7xx.h;Drivers/CMSIS/Device/ST/STM32H7xx/Include/system_stm32h7xx.h;Drivers/CMSIS/Device/ST/STM32H7xx/Source/Templates/system_stm32h7xx.c;
LibFiles=Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_adc.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_adc_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_adc.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cortex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_crc.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_crc_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dac.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dac_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_qspi.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rng.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_sdmmc.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mmc.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mmc_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hsem.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdma.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_def.h;Drivers/STM32H7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_exti.h;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_adc.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_adc_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_cortex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_crc.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_crc_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dac.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dac_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_eth_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_qspi.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rng.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_ll_sdmmc.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mmc.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mmc_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_tim_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_uart_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_rcc_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_flash_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_gpio.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_hsem.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_dma_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_mdma.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_pwr_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_i2c_ex.c;Drivers/STM32H7xx_HAL_Driver/Src/stm32h7xx_hal_exti.c;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_adc.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_adc_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_adc.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_cortex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_crc.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_crc_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dac.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dac_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_eth_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_qspi.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rng.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_ll_sdmmc.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mmc.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mmc_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_tim_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_uart_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_rcc_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_flash_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_gpio_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_hsem.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_dma_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_mdma.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_pwr_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_def.h;Drivers/STM32H7xx_HAL_Driver/Inc/Legacy/stm32_hal_legacy.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_i2c_ex.h;Drivers/STM32H7xx_HAL_Driver/Inc/stm32h7xx_hal_exti.h;Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h750xx.h;Drivers/CMSIS/Device/ST/STM32H7xx/Include/stm32h7xx.h;Drivers/CMSIS/Device/ST/STM32H7xx/Include/system_stm32h7xx.h;Drivers/CMSIS/Device/ST/STM32H7xx/Source/Templates/system_stm32h7xx.c;
[]
SourceFiles=;;
......
bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/CubeMX_Config.ioc
浏览文件 @ 99e2020d
#MicroXplorer Configuration settings - do not modify
ADC3.Channel-0\#ChannelRegularConversion=ADC_CHANNEL_5
ADC3.IPParameters=Rank-0\#ChannelRegularConversion,Channel-0\#ChannelRegularConversion,SamplingTime-0\#ChannelRegularConversion,OffsetNumber-0\#ChannelRegularConversion,NbrOfConversionFlag
ADC3.NbrOfConversionFlag=1
ADC3.OffsetNumber-0\#ChannelRegularConversion=ADC_OFFSET_NONE
ADC3.Rank-0\#ChannelRegularConversion=1
ADC3.SamplingTime-0\#ChannelRegularConversion=ADC_SAMPLETIME_1CYCLE_5
ETH.IPParameters=MediaInterface
ETH.MediaInterface=HAL_ETH_RMII_MODE
File.Version=6
KeepUserPlacement=false
Mcu.Family=STM32H7
Mcu.IP0=CORTEX_M7
Mcu.IP1=CRC
Mcu.IP2=NVIC
Mcu.IP3=RCC
Mcu.IP4=RNG
Mcu.IP5=SYS
Mcu.IP6=USART1
Mcu.IPNb=7
Mcu.IP0=ADC3
Mcu.IP1=CORTEX_M7
Mcu.IP10=SYS
Mcu.IP11=TIM12
Mcu.IP12=UART4
Mcu.IP13=USART1
Mcu.IP2=CRC
Mcu.IP3=DAC1
Mcu.IP4=ETH
Mcu.IP5=NVIC
Mcu.IP6=QUADSPI
Mcu.IP7=RCC
Mcu.IP8=RNG
Mcu.IP9=SDMMC1
Mcu.IPNb=14
Mcu.Name=STM32H750IBKx
Mcu.Package=UFBGA176
Mcu.Pin0=PA10
Mcu.Pin1=PC14-OSC32_IN (OSC32_IN)
Mcu.Pin2=PA9
Mcu.Pin3=PC15-OSC32_OUT (OSC32_OUT)
Mcu.Pin4=PH0-OSC_IN (PH0)
Mcu.Pin5=PH1-OSC_OUT (PH1)
Mcu.Pin6=VP_CRC_VS_CRC
Mcu.Pin7=VP_RNG_VS_RNG
Mcu.Pin8=VP_SYS_VS_Systick
Mcu.PinsNb=9
Mcu.Pin0=PB8
Mcu.Pin1=PG14
Mcu.Pin10=PC14-OSC32_IN (OSC32_IN)
Mcu.Pin11=PH13
Mcu.Pin12=PH14
Mcu.Pin13=PA9
Mcu.Pin14=PC15-OSC32_OUT (OSC32_OUT)
Mcu.Pin15=PC9
Mcu.Pin16=PH0-OSC_IN (PH0)
Mcu.Pin17=PC8
Mcu.Pin18=PC7
Mcu.Pin19=PH1-OSC_OUT (PH1)
Mcu.Pin2=PG13
Mcu.Pin20=PC6
Mcu.Pin21=PF3
Mcu.Pin22=PG6
Mcu.Pin23=PF7
Mcu.Pin24=PF8
Mcu.Pin25=PC1
Mcu.Pin26=PB2
Mcu.Pin27=PH9
Mcu.Pin28=PD13
Mcu.Pin29=PA1
Mcu.Pin3=PC12
Mcu.Pin30=PA4
Mcu.Pin31=PC4
Mcu.Pin32=PH7
Mcu.Pin33=PD12
Mcu.Pin34=PD11
Mcu.Pin35=PA2
Mcu.Pin36=PC5
Mcu.Pin37=PF12
Mcu.Pin38=PA7
Mcu.Pin39=PB14
Mcu.Pin4=PB9
Mcu.Pin40=VP_CRC_VS_CRC
Mcu.Pin41=VP_RNG_VS_RNG
Mcu.Pin42=VP_SYS_VS_Systick
Mcu.Pin43=VP_TIM12_VS_ControllerModeReset
Mcu.Pin5=PG11
Mcu.Pin6=PC11
Mcu.Pin7=PC10
Mcu.Pin8=PD2
Mcu.Pin9=PA10
Mcu.PinsNb=44
Mcu.ThirdPartyNb=0
Mcu.UserConstants=
Mcu.UserName=STM32H750IBKx
......@@ -37,16 +87,51 @@ NVIC.PriorityGroup=NVIC_PRIORITYGROUP_4
NVIC.SVCall_IRQn=true\:0\:0\:false\:false\:true\:false\:false
NVIC.SysTick_IRQn=true\:0\:0\:false\:false\:true\:false\:true
NVIC.UsageFault_IRQn=true\:0\:0\:false\:false\:true\:false\:false
PA1.Mode=RMII
PA1.Signal=ETH_REF_CLK
PA10.Locked=true
PA10.Mode=Asynchronous
PA10.Signal=USART1_RX
PA2.Mode=RMII
PA2.Signal=ETH_MDIO
PA4.Signal=COMP_DAC11_group
PA7.Mode=RMII
PA7.Signal=ETH_CRS_DV
PA9.Locked=true
PA9.Mode=Asynchronous
PA9.Signal=USART1_TX
PB14.Signal=S_TIM12_CH1
PB2.Locked=true
PB2.Mode=Single Bank 1
PB2.Signal=QUADSPI_CLK
PB8.Mode=mmc_8_bits_Wide_bus
PB8.Signal=SDMMC1_D4
PB9.Mode=mmc_8_bits_Wide_bus
PB9.Signal=SDMMC1_D5
PC1.Mode=RMII
PC1.Signal=ETH_MDC
PC10.Mode=mmc_8_bits_Wide_bus
PC10.Signal=SDMMC1_D2
PC11.Mode=mmc_8_bits_Wide_bus
PC11.Signal=SDMMC1_D3
PC12.Mode=mmc_8_bits_Wide_bus
PC12.Signal=SDMMC1_CK
PC14-OSC32_IN\ (OSC32_IN).Mode=LSE-External-Oscillator
PC14-OSC32_IN\ (OSC32_IN).Signal=RCC_OSC32_IN
PC15-OSC32_OUT\ (OSC32_OUT).Mode=LSE-External-Oscillator
PC15-OSC32_OUT\ (OSC32_OUT).Signal=RCC_OSC32_OUT
PC4.Mode=RMII
PC4.Signal=ETH_RXD0
PC5.Mode=RMII
PC5.Signal=ETH_RXD1
PC6.Mode=mmc_8_bits_Wide_bus
PC6.Signal=SDMMC1_D6
PC7.Mode=mmc_8_bits_Wide_bus
PC7.Signal=SDMMC1_D7
PC8.Mode=mmc_8_bits_Wide_bus
PC8.Signal=SDMMC1_D0
PC9.Mode=mmc_8_bits_Wide_bus
PC9.Signal=SDMMC1_D1
PCC.Checker=true
PCC.Line=STM32H750 Value line
PCC.MCU=STM32H750IBKx
......@@ -55,10 +140,49 @@ PCC.Seq0=0
PCC.Series=STM32H7
PCC.Temperature=25
PCC.Vdd=3.0
PD11.Locked=true
PD11.Mode=Single Bank 1
PD11.Signal=QUADSPI_BK1_IO0
PD12.Locked=true
PD12.Mode=Single Bank 1
PD12.Signal=QUADSPI_BK1_IO1
PD13.Locked=true
PD13.Mode=Single Bank 1
PD13.Signal=QUADSPI_BK1_IO3
PD2.Mode=mmc_8_bits_Wide_bus
PD2.Signal=SDMMC1_CMD
PF12.Locked=true
PF12.Signal=ADC1_INN2
PF3.Mode=IN5-Single-Ended
PF3.Signal=ADC3_INP5
PF7.Locked=true
PF7.Mode=Single Bank 1
PF7.Signal=QUADSPI_BK1_IO2
PF8.Locked=true
PF8.Mode=IN7-Single-Ended
PF8.Signal=ADC3_INP7
PG11.Mode=RMII
PG11.Signal=ETH_TX_EN
PG13.Mode=RMII
PG13.Signal=ETH_TXD0
PG14.Mode=RMII
PG14.Signal=ETH_TXD1
PG6.Locked=true
PG6.Mode=Single Bank 1
PG6.Signal=QUADSPI_BK1_NCS
PH0-OSC_IN\ (PH0).Mode=HSE-External-Oscillator
PH0-OSC_IN\ (PH0).Signal=RCC_OSC_IN
PH1-OSC_OUT\ (PH1).Mode=HSE-External-Oscillator
PH1-OSC_OUT\ (PH1).Signal=RCC_OSC_OUT
PH13.Locked=true
PH13.Mode=Asynchronous
PH13.Signal=UART4_TX
PH14.Locked=true
PH14.Mode=Asynchronous
PH14.Signal=UART4_RX
PH7.Locked=true
PH7.Signal=SPI5_MISO
PH9.Signal=S_TIM12_CH2
PinOutPanel.CurrentBGAView=Top
PinOutPanel.RotationAngle=0
ProjectManager.AskForMigrate=true
......@@ -87,8 +211,8 @@ ProjectManager.StackSize=0x400
ProjectManager.TargetToolchain=MDK-ARM V5
ProjectManager.ToolChainLocation=
ProjectManager.UnderRoot=false
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true
RCC.ADCFreq_Value=50390625
ProjectManager.functionlistsort=1-MX_GPIO_Init-GPIO-false-HAL-true,2-SystemClock_Config-RCC-false-HAL-false,3-MX_USART1_UART_Init-USART1-false-HAL-true,4-MX_CRC_Init-CRC-false-HAL-true,5-MX_RNG_Init-RNG-false-HAL-true,6-MX_ADC3_Init-ADC3-false-HAL-true,7-MX_DAC1_Init-DAC1-false-HAL-true,8-MX_ETH_Init-ETH-false-HAL-true,9-MX_QUADSPI_Init-QUADSPI-false-HAL-true,10-MX_SDMMC1_MMC_Init-SDMMC1-false-HAL-true,11-MX_SPI5_Init-SPI5-false-HAL-true,12-MX_UART4_Init-UART4-false-HAL-true
RCC.ADCFreq_Value=480000000
RCC.AHB12Freq_Value=240000000
RCC.AHB4Freq_Value=240000000
RCC.APB1Freq_Value=120000000
......@@ -108,15 +232,17 @@ RCC.D3PPRE=RCC_APB4_DIV2
RCC.DFSDMACLkFreq_Value=480000000
RCC.DFSDMFreq_Value=120000000
RCC.DIVM1=5
RCC.DIVM2=5
RCC.DIVN1=192
RCC.DIVN2=192
RCC.DIVP1Freq_Value=480000000
RCC.DIVP2Freq_Value=50390625
RCC.DIVP2Freq_Value=480000000
RCC.DIVP3Freq_Value=50390625
RCC.DIVQ1Freq_Value=480000000
RCC.DIVQ2Freq_Value=50390625
RCC.DIVQ2Freq_Value=480000000
RCC.DIVQ3Freq_Value=50390625
RCC.DIVR1Freq_Value=480000000
RCC.DIVR2Freq_Value=50390625
RCC.DIVR2Freq_Value=480000000
RCC.DIVR3Freq_Value=50390625
RCC.FDCANFreq_Value=480000000
RCC.FMCFreq_Value=240000000
......@@ -127,7 +253,7 @@ RCC.HPRE=RCC_HCLK_DIV2
RCC.HRTIMFreq_Value=240000000
RCC.I2C123Freq_Value=120000000
RCC.I2C4Freq_Value=120000000
RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,D1PPRE,D2PPRE1,D2PPRE2,D3PPRE,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVN1,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1Freq_Value,DIVQ2Freq_Value,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2Freq_Value,DIVR3Freq_Value,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,HPRE,HRTIMFreq_Value,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL2FRACN,PLL3FRACN,PLLFRACN,PLLSourceVirtual,QSPIFreq_Value,RNGFreq_Value,RTCFreq_Value,SAI1Freq_Value,SAI23Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16Freq_Value,USART234578Freq_Value,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value
RCC.IPParameters=ADCFreq_Value,AHB12Freq_Value,AHB4Freq_Value,APB1Freq_Value,APB2Freq_Value,APB3Freq_Value,APB4Freq_Value,AXIClockFreq_Value,CECFreq_Value,CKPERFreq_Value,CortexFreq_Value,CpuClockFreq_Value,D1CPREFreq_Value,D1PPRE,D2PPRE1,D2PPRE2,D3PPRE,DFSDMACLkFreq_Value,DFSDMFreq_Value,DIVM1,DIVM2,DIVN1,DIVN2,DIVP1Freq_Value,DIVP2Freq_Value,DIVP3Freq_Value,DIVQ1Freq_Value,DIVQ2Freq_Value,DIVQ3Freq_Value,DIVR1Freq_Value,DIVR2Freq_Value,DIVR3Freq_Value,FDCANFreq_Value,FMCFreq_Value,FamilyName,HCLK3ClockFreq_Value,HCLKFreq_Value,HPRE,HRTIMFreq_Value,I2C123Freq_Value,I2C4Freq_Value,LPTIM1Freq_Value,LPTIM2Freq_Value,LPTIM345Freq_Value,LPUART1Freq_Value,LTDCFreq_Value,MCO1PinFreq_Value,MCO2PinFreq_Value,PLL2FRACN,PLL3FRACN,PLLFRACN,PLLSourceVirtual,QSPIFreq_Value,RNGFreq_Value,RTCFreq_Value,SAI1Freq_Value,SAI23Freq_Value,SAI4AFreq_Value,SAI4BFreq_Value,SDMMCFreq_Value,SPDIFRXFreq_Value,SPI123Freq_Value,SPI45Freq_Value,SPI6Freq_Value,SWPMI1Freq_Value,SYSCLKFreq_VALUE,SYSCLKSource,Tim1OutputFreq_Value,Tim2OutputFreq_Value,TraceFreq_Value,USART16Freq_Value,USART234578Freq_Value,USBFreq_Value,VCO1OutputFreq_Value,VCO2OutputFreq_Value,VCO3OutputFreq_Value,VCOInput1Freq_Value,VCOInput2Freq_Value,VCOInput3Freq_Value
RCC.LPTIM1Freq_Value=120000000
RCC.LPTIM2Freq_Value=120000000
RCC.LPTIM345Freq_Value=120000000
......@@ -161,11 +287,19 @@ RCC.USART16Freq_Value=120000000
RCC.USART234578Freq_Value=120000000
RCC.USBFreq_Value=480000000
RCC.VCO1OutputFreq_Value=960000000
RCC.VCO2OutputFreq_Value=100781250
RCC.VCO2OutputFreq_Value=960000000
RCC.VCO3OutputFreq_Value=100781250
RCC.VCOInput1Freq_Value=5000000
RCC.VCOInput2Freq_Value=781250
RCC.VCOInput2Freq_Value=5000000
RCC.VCOInput3Freq_Value=781250
SH.COMP_DAC11_group.0=DAC1_OUT1,DAC_OUT1
SH.COMP_DAC11_group.ConfNb=1
SH.S_TIM12_CH1.0=TIM12_CH1,TriggerSource_TI1ED
SH.S_TIM12_CH1.ConfNb=1
SH.S_TIM12_CH2.0=TIM12_CH2,PWM Generation2 CH2
SH.S_TIM12_CH2.ConfNb=1
TIM12.Channel-PWM\ Generation2\ CH2=TIM_CHANNEL_2
TIM12.IPParameters=Channel-PWM Generation2 CH2
USART1.IPParameters=VirtualMode-Asynchronous
USART1.VirtualMode-Asynchronous=VM_ASYNC
VP_CRC_VS_CRC.Mode=CRC_Activate
......@@ -174,4 +308,6 @@ VP_RNG_VS_RNG.Mode=RNG_Activate
VP_RNG_VS_RNG.Signal=RNG_VS_RNG
VP_SYS_VS_Systick.Mode=SysTick
VP_SYS_VS_Systick.Signal=SYS_VS_Systick
VP_TIM12_VS_ControllerModeReset.Mode=Reset Mode
VP_TIM12_VS_ControllerModeReset.Signal=TIM12_VS_ControllerModeReset
board=custom
bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/Inc/main.h
浏览文件 @ 99e2020d
......@@ -50,6 +50,8 @@ extern "C" {
/* USER CODE END EM */
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
/* Exported functions prototypes ---------------------------------------------*/
void Error_Handler(void);
......
bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/Inc/stm32h7xx_hal_conf.h
浏览文件 @ 99e2020d
......@@ -34,16 +34,16 @@
*/
#define HAL_MODULE_ENABLED
/* #define HAL_ADC_MODULE_ENABLED */
#define HAL_ADC_MODULE_ENABLED
/* #define HAL_FDCAN_MODULE_ENABLED */
/* #define HAL_CEC_MODULE_ENABLED */
/* #define HAL_COMP_MODULE_ENABLED */
#define HAL_CRC_MODULE_ENABLED
/* #define HAL_CRYP_MODULE_ENABLED */
/* #define HAL_DAC_MODULE_ENABLED */
#define HAL_DAC_MODULE_ENABLED
/* #define HAL_DCMI_MODULE_ENABLED */
/* #define HAL_DMA2D_MODULE_ENABLED */
/* #define HAL_ETH_MODULE_ENABLED */
#define HAL_ETH_MODULE_ENABLED
/* #define HAL_NAND_MODULE_ENABLED */
/* #define HAL_NOR_MODULE_ENABLED */
/* #define HAL_SRAM_MODULE_ENABLED */
......@@ -57,16 +57,16 @@
/* #define HAL_IWDG_MODULE_ENABLED */
/* #define HAL_LPTIM_MODULE_ENABLED */
/* #define HAL_LTDC_MODULE_ENABLED */
/* #define HAL_QSPI_MODULE_ENABLED */
#define HAL_QSPI_MODULE_ENABLED
#define HAL_RNG_MODULE_ENABLED
/* #define HAL_RTC_MODULE_ENABLED */
/* #define HAL_SAI_MODULE_ENABLED */
/* #define HAL_SD_MODULE_ENABLED */
/* #define HAL_MMC_MODULE_ENABLED */
#define HAL_MMC_MODULE_ENABLED
/* #define HAL_SPDIFRX_MODULE_ENABLED */
/* #define HAL_SPI_MODULE_ENABLED */
/* #define HAL_SWPMI_MODULE_ENABLED */
/* #define HAL_TIM_MODULE_ENABLED */
#define HAL_TIM_MODULE_ENABLED
#define HAL_UART_MODULE_ENABLED
/* #define HAL_USART_MODULE_ENABLED */
/* #define HAL_IRDA_MODULE_ENABLED */
......
bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/Src/main.c
浏览文件 @ 99e2020d
......@@ -20,6 +20,7 @@
/* Includes ------------------------------------------------------------------*/
#include "main.h"
#include "string.h"
/* Private includes ----------------------------------------------------------*/
/* USER CODE BEGIN Includes */
......@@ -42,11 +43,47 @@
/* USER CODE END PM */
/* Private variables ---------------------------------------------------------*/
#if defined ( __ICCARM__ ) /*!< IAR Compiler */
#pragma location=0x30040000
ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT]; /* Ethernet Rx DMA Descriptors */
#pragma location=0x30040060
ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT]; /* Ethernet Tx DMA Descriptors */
#pragma location=0x30040200
uint8_t Rx_Buff[ETH_RX_DESC_CNT][ETH_MAX_PACKET_SIZE]; /* Ethernet Receive Buffers */
#elif defined ( __CC_ARM ) /* MDK ARM Compiler */
__attribute__((at(0x30040000))) ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT]; /* Ethernet Rx DMA Descriptors */
__attribute__((at(0x30040060))) ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT]; /* Ethernet Tx DMA Descriptors */
__attribute__((at(0x30040200))) uint8_t Rx_Buff[ETH_RX_DESC_CNT][ETH_MAX_PACKET_SIZE]; /* Ethernet Receive Buffer */
#elif defined ( __GNUC__ ) /* GNU Compiler */
ETH_DMADescTypeDef DMARxDscrTab[ETH_RX_DESC_CNT] __attribute__((section(".RxDecripSection"))); /* Ethernet Rx DMA Descriptors */
ETH_DMADescTypeDef DMATxDscrTab[ETH_TX_DESC_CNT] __attribute__((section(".TxDecripSection"))); /* Ethernet Tx DMA Descriptors */
uint8_t Rx_Buff[ETH_RX_DESC_CNT][ETH_MAX_PACKET_SIZE] __attribute__((section(".RxArraySection"))); /* Ethernet Receive Buffers */
#endif
ETH_TxPacketConfig TxConfig;
ADC_HandleTypeDef hadc3;
CRC_HandleTypeDef hcrc;
DAC_HandleTypeDef hdac1;
ETH_HandleTypeDef heth;
QSPI_HandleTypeDef hqspi;
RNG_HandleTypeDef hrng;
MMC_HandleTypeDef hmmc1;
TIM_HandleTypeDef htim12;
UART_HandleTypeDef huart4;
UART_HandleTypeDef huart1;
/* USER CODE BEGIN PV */
......@@ -59,6 +96,13 @@ static void MX_GPIO_Init(void);
static void MX_USART1_UART_Init(void);
static void MX_CRC_Init(void);
static void MX_RNG_Init(void);
static void MX_ADC3_Init(void);
static void MX_DAC1_Init(void);
static void MX_ETH_Init(void);
static void MX_QUADSPI_Init(void);
static void MX_SDMMC1_MMC_Init(void);
static void MX_UART4_Init(void);
static void MX_TIM12_Init(void);
/* USER CODE BEGIN PFP */
/* USER CODE END PFP */
......@@ -100,6 +144,13 @@ int main(void)
MX_USART1_UART_Init();
MX_CRC_Init();
MX_RNG_Init();
MX_ADC3_Init();
MX_DAC1_Init();
MX_ETH_Init();
MX_QUADSPI_Init();
MX_SDMMC1_MMC_Init();
MX_UART4_Init();
MX_TIM12_Init();
/* USER CODE BEGIN 2 */
/* USER CODE END 2 */
......@@ -133,6 +184,9 @@ void SystemClock_Config(void)
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0);
while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
/** Macro to configure the PLL clock source
*/
__HAL_RCC_PLL_PLLSOURCE_CONFIG(RCC_PLLSOURCE_HSE);
/** Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48|RCC_OSCILLATORTYPE_HSE;
......@@ -169,15 +223,85 @@ void SystemClock_Config(void)
{
Error_Handler();
}
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART1|RCC_PERIPHCLK_RNG;
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_UART4|RCC_PERIPHCLK_USART1
|RCC_PERIPHCLK_RNG|RCC_PERIPHCLK_SDMMC
|RCC_PERIPHCLK_ADC|RCC_PERIPHCLK_QSPI;
PeriphClkInitStruct.PLL2.PLL2M = 5;
PeriphClkInitStruct.PLL2.PLL2N = 192;
PeriphClkInitStruct.PLL2.PLL2P = 2;
PeriphClkInitStruct.PLL2.PLL2Q = 2;
PeriphClkInitStruct.PLL2.PLL2R = 2;
PeriphClkInitStruct.PLL2.PLL2RGE = RCC_PLL2VCIRANGE_2;
PeriphClkInitStruct.PLL2.PLL2VCOSEL = RCC_PLL2VCOWIDE;
PeriphClkInitStruct.PLL2.PLL2FRACN = 0;
PeriphClkInitStruct.QspiClockSelection = RCC_QSPICLKSOURCE_D1HCLK;
PeriphClkInitStruct.SdmmcClockSelection = RCC_SDMMCCLKSOURCE_PLL;
PeriphClkInitStruct.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_D2PCLK1;
PeriphClkInitStruct.Usart16ClockSelection = RCC_USART16CLKSOURCE_D2PCLK2;
PeriphClkInitStruct.RngClockSelection = RCC_RNGCLKSOURCE_HSI48;
PeriphClkInitStruct.AdcClockSelection = RCC_ADCCLKSOURCE_PLL2;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
{
Error_Handler();
}
}
/**
* @brief ADC3 Initialization Function
* @param None
* @retval None
*/
static void MX_ADC3_Init(void)
{
/* USER CODE BEGIN ADC3_Init 0 */
/* USER CODE END ADC3_Init 0 */
ADC_ChannelConfTypeDef sConfig = {0};
/* USER CODE BEGIN ADC3_Init 1 */
/* USER CODE END ADC3_Init 1 */
/** Common config
*/
hadc3.Instance = ADC3;
hadc3.Init.ClockPrescaler = ADC_CLOCK_ASYNC_DIV1;
hadc3.Init.Resolution = ADC_RESOLUTION_16B;
hadc3.Init.ScanConvMode = ADC_SCAN_DISABLE;
hadc3.Init.EOCSelection = ADC_EOC_SINGLE_CONV;
hadc3.Init.LowPowerAutoWait = DISABLE;
hadc3.Init.ContinuousConvMode = DISABLE;
hadc3.Init.NbrOfConversion = 1;
hadc3.Init.DiscontinuousConvMode = DISABLE;
hadc3.Init.ExternalTrigConv = ADC_SOFTWARE_START;
hadc3.Init.ExternalTrigConvEdge = ADC_EXTERNALTRIGCONVEDGE_NONE;
hadc3.Init.ConversionDataManagement = ADC_CONVERSIONDATA_DR;
hadc3.Init.Overrun = ADC_OVR_DATA_PRESERVED;
hadc3.Init.LeftBitShift = ADC_LEFTBITSHIFT_NONE;
hadc3.Init.OversamplingMode = DISABLE;
if (HAL_ADC_Init(&hadc3) != HAL_OK)
{
Error_Handler();
}
/** Configure Regular Channel
*/
sConfig.Channel = ADC_CHANNEL_5;
sConfig.Rank = ADC_REGULAR_RANK_1;
sConfig.SamplingTime = ADC_SAMPLETIME_1CYCLE_5;
sConfig.SingleDiff = ADC_SINGLE_ENDED;
sConfig.OffsetNumber = ADC_OFFSET_NONE;
sConfig.Offset = 0;
if (HAL_ADC_ConfigChannel(&hadc3, &sConfig) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN ADC3_Init 2 */
/* USER CODE END ADC3_Init 2 */
}
/**
* @brief CRC Initialization Function
* @param None
......@@ -209,6 +333,131 @@ static void MX_CRC_Init(void)
}
/**
* @brief DAC1 Initialization Function
* @param None
* @retval None
*/
static void MX_DAC1_Init(void)
{
/* USER CODE BEGIN DAC1_Init 0 */
/* USER CODE END DAC1_Init 0 */
DAC_ChannelConfTypeDef sConfig = {0};
/* USER CODE BEGIN DAC1_Init 1 */
/* USER CODE END DAC1_Init 1 */
/** DAC Initialization
*/
hdac1.Instance = DAC1;
if (HAL_DAC_Init(&hdac1) != HAL_OK)
{
Error_Handler();
}
/** DAC channel OUT1 config
*/
sConfig.DAC_SampleAndHold = DAC_SAMPLEANDHOLD_DISABLE;
sConfig.DAC_Trigger = DAC_TRIGGER_NONE;
sConfig.DAC_OutputBuffer = DAC_OUTPUTBUFFER_ENABLE;
sConfig.DAC_ConnectOnChipPeripheral = DAC_CHIPCONNECT_DISABLE;
sConfig.DAC_UserTrimming = DAC_TRIMMING_FACTORY;
if (HAL_DAC_ConfigChannel(&hdac1, &sConfig, DAC_CHANNEL_1) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN DAC1_Init 2 */
/* USER CODE END DAC1_Init 2 */
}
/**
* @brief ETH Initialization Function
* @param None
* @retval None
*/
static void MX_ETH_Init(void)
{
/* USER CODE BEGIN ETH_Init 0 */
/* USER CODE END ETH_Init 0 */
uint8_t MACAddr[6] ;
/* USER CODE BEGIN ETH_Init 1 */
/* USER CODE END ETH_Init 1 */
heth.Instance = ETH;
MACAddr[0] = 0x00;
MACAddr[1] = 0x80;
MACAddr[2] = 0xE1;
MACAddr[3] = 0x00;
MACAddr[4] = 0x00;
MACAddr[5] = 0x00;
heth.Init.MACAddr = &MACAddr[0];
heth.Init.MediaInterface = HAL_ETH_RMII_MODE;
heth.Init.TxDesc = DMATxDscrTab;
heth.Init.RxDesc = DMARxDscrTab;
heth.Init.RxBuffLen = 1524;
/* USER CODE BEGIN MACADDRESS */
/* USER CODE END MACADDRESS */
if (HAL_ETH_Init(&heth) != HAL_OK)
{
Error_Handler();
}
memset(&TxConfig, 0 , sizeof(ETH_TxPacketConfig));
TxConfig.Attributes = ETH_TX_PACKETS_FEATURES_CSUM | ETH_TX_PACKETS_FEATURES_CRCPAD;
TxConfig.ChecksumCtrl = ETH_CHECKSUM_IPHDR_PAYLOAD_INSERT_PHDR_CALC;
TxConfig.CRCPadCtrl = ETH_CRC_PAD_INSERT;
/* USER CODE BEGIN ETH_Init 2 */
/* USER CODE END ETH_Init 2 */
}
/**
* @brief QUADSPI Initialization Function
* @param None
* @retval None
*/
static void MX_QUADSPI_Init(void)
{
/* USER CODE BEGIN QUADSPI_Init 0 */
/* USER CODE END QUADSPI_Init 0 */
/* USER CODE BEGIN QUADSPI_Init 1 */
/* USER CODE END QUADSPI_Init 1 */
/* QUADSPI parameter configuration*/
hqspi.Instance = QUADSPI;
hqspi.Init.ClockPrescaler = 255;
hqspi.Init.FifoThreshold = 1;
hqspi.Init.SampleShifting = QSPI_SAMPLE_SHIFTING_NONE;
hqspi.Init.FlashSize = 1;
hqspi.Init.ChipSelectHighTime = QSPI_CS_HIGH_TIME_1_CYCLE;
hqspi.Init.ClockMode = QSPI_CLOCK_MODE_0;
hqspi.Init.FlashID = QSPI_FLASH_ID_1;
hqspi.Init.DualFlash = QSPI_DUALFLASH_DISABLE;
if (HAL_QSPI_Init(&hqspi) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN QUADSPI_Init 2 */
/* USER CODE END QUADSPI_Init 2 */
}
/**
* @brief RNG Initialization Function
* @param None
......@@ -236,6 +485,143 @@ static void MX_RNG_Init(void)
}
/**
* @brief SDMMC1 Initialization Function
* @param None
* @retval None
*/
static void MX_SDMMC1_MMC_Init(void)
{
/* USER CODE BEGIN SDMMC1_Init 0 */
/* USER CODE END SDMMC1_Init 0 */
/* USER CODE BEGIN SDMMC1_Init 1 */
/* USER CODE END SDMMC1_Init 1 */
hmmc1.Instance = SDMMC1;
hmmc1.Init.ClockEdge = SDMMC_CLOCK_EDGE_RISING;
hmmc1.Init.ClockPowerSave = SDMMC_CLOCK_POWER_SAVE_DISABLE;
hmmc1.Init.BusWide = SDMMC_BUS_WIDE_1B;
hmmc1.Init.HardwareFlowControl = SDMMC_HARDWARE_FLOW_CONTROL_DISABLE;
hmmc1.Init.ClockDiv = 0;
if (HAL_MMC_Init(&hmmc1) != HAL_OK)
{
Error_Handler();
}
if (HAL_MMC_ConfigWideBusOperation(&hmmc1, SDMMC_BUS_WIDE_8B) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN SDMMC1_Init 2 */
/* USER CODE END SDMMC1_Init 2 */
}
/**
* @brief TIM12 Initialization Function
* @param None
* @retval None
*/
static void MX_TIM12_Init(void)
{
/* USER CODE BEGIN TIM12_Init 0 */
/* USER CODE END TIM12_Init 0 */
TIM_SlaveConfigTypeDef sSlaveConfig = {0};
TIM_OC_InitTypeDef sConfigOC = {0};
/* USER CODE BEGIN TIM12_Init 1 */
/* USER CODE END TIM12_Init 1 */
htim12.Instance = TIM12;
htim12.Init.Prescaler = 0;
htim12.Init.CounterMode = TIM_COUNTERMODE_UP;
htim12.Init.Period = 0;
htim12.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
htim12.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
if (HAL_TIM_Base_Init(&htim12) != HAL_OK)
{
Error_Handler();
}
if (HAL_TIM_PWM_Init(&htim12) != HAL_OK)
{
Error_Handler();
}
sSlaveConfig.SlaveMode = TIM_SLAVEMODE_RESET;
sSlaveConfig.InputTrigger = TIM_TS_TI1F_ED;
sSlaveConfig.TriggerFilter = 0;
if (HAL_TIM_SlaveConfigSynchro(&htim12, &sSlaveConfig) != HAL_OK)
{
Error_Handler();
}
sConfigOC.OCMode = TIM_OCMODE_PWM1;
sConfigOC.Pulse = 0;
sConfigOC.OCPolarity = TIM_OCPOLARITY_HIGH;
sConfigOC.OCFastMode = TIM_OCFAST_DISABLE;
if (HAL_TIM_PWM_ConfigChannel(&htim12, &sConfigOC, TIM_CHANNEL_2) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN TIM12_Init 2 */
/* USER CODE END TIM12_Init 2 */
HAL_TIM_MspPostInit(&htim12);
}
/**
* @brief UART4 Initialization Function
* @param None
* @retval None
*/
static void MX_UART4_Init(void)
{
/* USER CODE BEGIN UART4_Init 0 */
/* USER CODE END UART4_Init 0 */
/* USER CODE BEGIN UART4_Init 1 */
/* USER CODE END UART4_Init 1 */
huart4.Instance = UART4;
huart4.Init.BaudRate = 115200;
huart4.Init.WordLength = UART_WORDLENGTH_8B;
huart4.Init.StopBits = UART_STOPBITS_1;
huart4.Init.Parity = UART_PARITY_NONE;
huart4.Init.Mode = UART_MODE_TX_RX;
huart4.Init.HwFlowCtl = UART_HWCONTROL_NONE;
huart4.Init.OverSampling = UART_OVERSAMPLING_16;
huart4.Init.OneBitSampling = UART_ONE_BIT_SAMPLE_DISABLE;
huart4.Init.ClockPrescaler = UART_PRESCALER_DIV1;
huart4.AdvancedInit.AdvFeatureInit = UART_ADVFEATURE_NO_INIT;
if (HAL_UART_Init(&huart4) != HAL_OK)
{
Error_Handler();
}
if (HAL_UARTEx_SetTxFifoThreshold(&huart4, UART_TXFIFO_THRESHOLD_1_8) != HAL_OK)
{
Error_Handler();
}
if (HAL_UARTEx_SetRxFifoThreshold(&huart4, UART_RXFIFO_THRESHOLD_1_8) != HAL_OK)
{
Error_Handler();
}
if (HAL_UARTEx_DisableFifoMode(&huart4) != HAL_OK)
{
Error_Handler();
}
/* USER CODE BEGIN UART4_Init 2 */
/* USER CODE END UART4_Init 2 */
}
/**
* @brief USART1 Initialization Function
* @param None
......@@ -291,11 +677,30 @@ static void MX_USART1_UART_Init(void)
*/
static void MX_GPIO_Init(void)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
/* GPIO Ports Clock Enable */
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
__HAL_RCC_GPIOH_CLK_ENABLE();
__HAL_RCC_GPIOF_CLK_ENABLE();
/*Configure GPIO pin : PH7 */
GPIO_InitStruct.Pin = GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF5_SPI5;
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
/*Configure GPIO pin : PF12 */
GPIO_InitStruct.Pin = GPIO_PIN_12;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
}
......
bsp/stm32/stm32h750-armfly-h7-tool/board/CubeMX_Config/Src/stm32h7xx_hal_msp.c
浏览文件 @ 99e2020d
......@@ -58,7 +58,9 @@
/* USER CODE BEGIN 0 */
/* USER CODE END 0 */
/**
void HAL_TIM_MspPostInit(TIM_HandleTypeDef *htim);
/**
* Initializes the Global MSP.
*/
void HAL_MspInit(void)
......@@ -76,6 +78,69 @@ void HAL_MspInit(void)
/* USER CODE END MspInit 1 */
}
/**
* @brief ADC MSP Initialization
* This function configures the hardware resources used in this example
* @param hadc: ADC handle pointer
* @retval None
*/
void HAL_ADC_MspInit(ADC_HandleTypeDef* hadc)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hadc->Instance==ADC3)
{
/* USER CODE BEGIN ADC3_MspInit 0 */
/* USER CODE END ADC3_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_ADC3_CLK_ENABLE();
__HAL_RCC_GPIOF_CLK_ENABLE();
/**ADC3 GPIO Configuration
PF3 ------> ADC3_INP5
PF8 ------> ADC3_INP7
*/
GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_8;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
/* USER CODE BEGIN ADC3_MspInit 1 */
/* USER CODE END ADC3_MspInit 1 */
}
}
/**
* @brief ADC MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hadc: ADC handle pointer
* @retval None
*/
void HAL_ADC_MspDeInit(ADC_HandleTypeDef* hadc)
{
if(hadc->Instance==ADC3)
{
/* USER CODE BEGIN ADC3_MspDeInit 0 */
/* USER CODE END ADC3_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_ADC3_CLK_DISABLE();
/**ADC3 GPIO Configuration
PF3 ------> ADC3_INP5
PF8 ------> ADC3_INP7
*/
HAL_GPIO_DeInit(GPIOF, GPIO_PIN_3|GPIO_PIN_8);
/* USER CODE BEGIN ADC3_MspDeInit 1 */
/* USER CODE END ADC3_MspDeInit 1 */
}
}
/**
* @brief CRC MSP Initialization
* This function configures the hardware resources used in this example
......@@ -120,6 +185,273 @@ void HAL_CRC_MspDeInit(CRC_HandleTypeDef* hcrc)
}
/**
* @brief DAC MSP Initialization
* This function configures the hardware resources used in this example
* @param hdac: DAC handle pointer
* @retval None
*/
void HAL_DAC_MspInit(DAC_HandleTypeDef* hdac)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hdac->Instance==DAC1)
{
/* USER CODE BEGIN DAC1_MspInit 0 */
/* USER CODE END DAC1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_DAC12_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/**DAC1 GPIO Configuration
PA4 ------> DAC1_OUT1
*/
GPIO_InitStruct.Pin = GPIO_PIN_4;
GPIO_InitStruct.Mode = GPIO_MODE_ANALOG;
GPIO_InitStruct.Pull = GPIO_NOPULL;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USER CODE BEGIN DAC1_MspInit 1 */
/* USER CODE END DAC1_MspInit 1 */
}
}
/**
* @brief DAC MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hdac: DAC handle pointer
* @retval None
*/
void HAL_DAC_MspDeInit(DAC_HandleTypeDef* hdac)
{
if(hdac->Instance==DAC1)
{
/* USER CODE BEGIN DAC1_MspDeInit 0 */
/* USER CODE END DAC1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_DAC12_CLK_DISABLE();
/**DAC1 GPIO Configuration
PA4 ------> DAC1_OUT1
*/
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_4);
/* USER CODE BEGIN DAC1_MspDeInit 1 */
/* USER CODE END DAC1_MspDeInit 1 */
}
}
/**
* @brief ETH MSP Initialization
* This function configures the hardware resources used in this example
* @param heth: ETH handle pointer
* @retval None
*/
void HAL_ETH_MspInit(ETH_HandleTypeDef* heth)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(heth->Instance==ETH)
{
/* USER CODE BEGIN ETH_MspInit 0 */
/* USER CODE END ETH_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_ETH1MAC_CLK_ENABLE();
__HAL_RCC_ETH1TX_CLK_ENABLE();
__HAL_RCC_ETH1RX_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOA_CLK_ENABLE();
/**ETH GPIO Configuration
PG14 ------> ETH_TXD1
PG13 ------> ETH_TXD0
PG11 ------> ETH_TX_EN
PC1 ------> ETH_MDC
PA1 ------> ETH_REF_CLK
PC4 ------> ETH_RXD0
PA2 ------> ETH_MDIO
PC5 ------> ETH_RXD1
PA7 ------> ETH_CRS_DV
*/
GPIO_InitStruct.Pin = GPIO_PIN_14|GPIO_PIN_13|GPIO_PIN_11;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF11_ETH;
HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
/* USER CODE BEGIN ETH_MspInit 1 */
/* USER CODE END ETH_MspInit 1 */
}
}
/**
* @brief ETH MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param heth: ETH handle pointer
* @retval None
*/
void HAL_ETH_MspDeInit(ETH_HandleTypeDef* heth)
{
if(heth->Instance==ETH)
{
/* USER CODE BEGIN ETH_MspDeInit 0 */
/* USER CODE END ETH_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_ETH1MAC_CLK_DISABLE();
__HAL_RCC_ETH1TX_CLK_DISABLE();
__HAL_RCC_ETH1RX_CLK_DISABLE();
/**ETH GPIO Configuration
PG14 ------> ETH_TXD1
PG13 ------> ETH_TXD0
PG11 ------> ETH_TX_EN
PC1 ------> ETH_MDC
PA1 ------> ETH_REF_CLK
PC4 ------> ETH_RXD0
PA2 ------> ETH_MDIO
PC5 ------> ETH_RXD1
PA7 ------> ETH_CRS_DV
*/
HAL_GPIO_DeInit(GPIOG, GPIO_PIN_14|GPIO_PIN_13|GPIO_PIN_11);
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_1|GPIO_PIN_4|GPIO_PIN_5);
HAL_GPIO_DeInit(GPIOA, GPIO_PIN_1|GPIO_PIN_2|GPIO_PIN_7);
/* USER CODE BEGIN ETH_MspDeInit 1 */
/* USER CODE END ETH_MspDeInit 1 */
}
}
/**
* @brief QSPI MSP Initialization
* This function configures the hardware resources used in this example
* @param hqspi: QSPI handle pointer
* @retval None
*/
void HAL_QSPI_MspInit(QSPI_HandleTypeDef* hqspi)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hqspi->Instance==QUADSPI)
{
/* USER CODE BEGIN QUADSPI_MspInit 0 */
/* USER CODE END QUADSPI_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_QSPI_CLK_ENABLE();
__HAL_RCC_GPIOG_CLK_ENABLE();
__HAL_RCC_GPIOF_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
/**QUADSPI GPIO Configuration
PG6 ------> QUADSPI_BK1_NCS
PF7 ------> QUADSPI_BK1_IO2
PB2 ------> QUADSPI_CLK
PD13 ------> QUADSPI_BK1_IO3
PD12 ------> QUADSPI_BK1_IO1
PD11 ------> QUADSPI_BK1_IO0
*/
GPIO_InitStruct.Pin = GPIO_PIN_6;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF10_QUADSPI;
HAL_GPIO_Init(GPIOG, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_7;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF9_QUADSPI;
HAL_GPIO_Init(GPIOF, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_2;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF9_QUADSPI;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_12|GPIO_PIN_11;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF9_QUADSPI;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/* USER CODE BEGIN QUADSPI_MspInit 1 */
/* USER CODE END QUADSPI_MspInit 1 */
}
}
/**
* @brief QSPI MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hqspi: QSPI handle pointer
* @retval None
*/
void HAL_QSPI_MspDeInit(QSPI_HandleTypeDef* hqspi)
{
if(hqspi->Instance==QUADSPI)
{
/* USER CODE BEGIN QUADSPI_MspDeInit 0 */
/* USER CODE END QUADSPI_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_QSPI_CLK_DISABLE();
/**QUADSPI GPIO Configuration
PG6 ------> QUADSPI_BK1_NCS
PF7 ------> QUADSPI_BK1_IO2
PB2 ------> QUADSPI_CLK
PD13 ------> QUADSPI_BK1_IO3
PD12 ------> QUADSPI_BK1_IO1
PD11 ------> QUADSPI_BK1_IO0
*/
HAL_GPIO_DeInit(GPIOG, GPIO_PIN_6);
HAL_GPIO_DeInit(GPIOF, GPIO_PIN_7);
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_2);
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_13|GPIO_PIN_12|GPIO_PIN_11);
/* USER CODE BEGIN QUADSPI_MspDeInit 1 */
/* USER CODE END QUADSPI_MspDeInit 1 */
}
}
/**
* @brief RNG MSP Initialization
* This function configures the hardware resources used in this example
......@@ -164,6 +496,201 @@ void HAL_RNG_MspDeInit(RNG_HandleTypeDef* hrng)
}
/**
* @brief MMC MSP Initialization
* This function configures the hardware resources used in this example
* @param hmmc: MMC handle pointer
* @retval None
*/
void HAL_MMC_MspInit(MMC_HandleTypeDef* hmmc)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(hmmc->Instance==SDMMC1)
{
/* USER CODE BEGIN SDMMC1_MspInit 0 */
/* USER CODE END SDMMC1_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_SDMMC1_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE();
__HAL_RCC_GPIOD_CLK_ENABLE();
/**SDMMC1 GPIO Configuration
PB8 ------> SDMMC1_D4
PC12 ------> SDMMC1_CK
PB9 ------> SDMMC1_D5
PC11 ------> SDMMC1_D3
PC10 ------> SDMMC1_D2
PD2 ------> SDMMC1_CMD
PC9 ------> SDMMC1_D1
PC8 ------> SDMMC1_D0
PC7 ------> SDMMC1_D7
PC6 ------> SDMMC1_D6
*/
GPIO_InitStruct.Pin = GPIO_PIN_8|GPIO_PIN_9;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO1;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
|GPIO_PIN_8|GPIO_PIN_7|GPIO_PIN_6;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO1;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_2;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO1;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
/* USER CODE BEGIN SDMMC1_MspInit 1 */
/* USER CODE END SDMMC1_MspInit 1 */
}
}
/**
* @brief MMC MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param hmmc: MMC handle pointer
* @retval None
*/
void HAL_MMC_MspDeInit(MMC_HandleTypeDef* hmmc)
{
if(hmmc->Instance==SDMMC1)
{
/* USER CODE BEGIN SDMMC1_MspDeInit 0 */
/* USER CODE END SDMMC1_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_SDMMC1_CLK_DISABLE();
/**SDMMC1 GPIO Configuration
PB8 ------> SDMMC1_D4
PC12 ------> SDMMC1_CK
PB9 ------> SDMMC1_D5
PC11 ------> SDMMC1_D3
PC10 ------> SDMMC1_D2
PD2 ------> SDMMC1_CMD
PC9 ------> SDMMC1_D1
PC8 ------> SDMMC1_D0
PC7 ------> SDMMC1_D7
PC6 ------> SDMMC1_D6
*/
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_8|GPIO_PIN_9);
HAL_GPIO_DeInit(GPIOC, GPIO_PIN_12|GPIO_PIN_11|GPIO_PIN_10|GPIO_PIN_9
|GPIO_PIN_8|GPIO_PIN_7|GPIO_PIN_6);
HAL_GPIO_DeInit(GPIOD, GPIO_PIN_2);
/* USER CODE BEGIN SDMMC1_MspDeInit 1 */
/* USER CODE END SDMMC1_MspDeInit 1 */
}
}
/**
* @brief TIM_Base MSP Initialization
* This function configures the hardware resources used in this example
* @param htim_base: TIM_Base handle pointer
* @retval None
*/
void HAL_TIM_Base_MspInit(TIM_HandleTypeDef* htim_base)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(htim_base->Instance==TIM12)
{
/* USER CODE BEGIN TIM12_MspInit 0 */
/* USER CODE END TIM12_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_TIM12_CLK_ENABLE();
__HAL_RCC_GPIOB_CLK_ENABLE();
/**TIM12 GPIO Configuration
PB14 ------> TIM12_CH1
*/
GPIO_InitStruct.Pin = GPIO_PIN_14;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF2_TIM12;
HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
/* USER CODE BEGIN TIM12_MspInit 1 */
/* USER CODE END TIM12_MspInit 1 */
}
}
void HAL_TIM_MspPostInit(TIM_HandleTypeDef* htim)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(htim->Instance==TIM12)
{
/* USER CODE BEGIN TIM12_MspPostInit 0 */
/* USER CODE END TIM12_MspPostInit 0 */
__HAL_RCC_GPIOH_CLK_ENABLE();
/**TIM12 GPIO Configuration
PH9 ------> TIM12_CH2
*/
GPIO_InitStruct.Pin = GPIO_PIN_9;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF2_TIM12;
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
/* USER CODE BEGIN TIM12_MspPostInit 1 */
/* USER CODE END TIM12_MspPostInit 1 */
}
}
/**
* @brief TIM_Base MSP De-Initialization
* This function freeze the hardware resources used in this example
* @param htim_base: TIM_Base handle pointer
* @retval None
*/
void HAL_TIM_Base_MspDeInit(TIM_HandleTypeDef* htim_base)
{
if(htim_base->Instance==TIM12)
{
/* USER CODE BEGIN TIM12_MspDeInit 0 */
/* USER CODE END TIM12_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_TIM12_CLK_DISABLE();
/**TIM12 GPIO Configuration
PH9 ------> TIM12_CH2
PB14 ------> TIM12_CH1
*/
HAL_GPIO_DeInit(GPIOH, GPIO_PIN_9);
HAL_GPIO_DeInit(GPIOB, GPIO_PIN_14);
/* USER CODE BEGIN TIM12_MspDeInit 1 */
/* USER CODE END TIM12_MspDeInit 1 */
}
}
/**
* @brief UART MSP Initialization
* This function configures the hardware resources used in this example
......@@ -173,7 +700,31 @@ void HAL_RNG_MspDeInit(RNG_HandleTypeDef* hrng)
void HAL_UART_MspInit(UART_HandleTypeDef* huart)
{
GPIO_InitTypeDef GPIO_InitStruct = {0};
if(huart->Instance==USART1)
if(huart->Instance==UART4)
{
/* USER CODE BEGIN UART4_MspInit 0 */
/* USER CODE END UART4_MspInit 0 */
/* Peripheral clock enable */
__HAL_RCC_UART4_CLK_ENABLE();
__HAL_RCC_GPIOH_CLK_ENABLE();
/**UART4 GPIO Configuration
PH13 ------> UART4_TX
PH14 ------> UART4_RX
*/
GPIO_InitStruct.Pin = GPIO_PIN_13|GPIO_PIN_14;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
GPIO_InitStruct.Alternate = GPIO_AF8_UART4;
HAL_GPIO_Init(GPIOH, &GPIO_InitStruct);
/* USER CODE BEGIN UART4_MspInit 1 */
/* USER CODE END UART4_MspInit 1 */
}
else if(huart->Instance==USART1)
{
/* USER CODE BEGIN USART1_MspInit 0 */
......@@ -208,7 +759,25 @@ void HAL_UART_MspInit(UART_HandleTypeDef* huart)
*/
void HAL_UART_MspDeInit(UART_HandleTypeDef* huart)
{
if(huart->Instance==USART1)
if(huart->Instance==UART4)
{
/* USER CODE BEGIN UART4_MspDeInit 0 */
/* USER CODE END UART4_MspDeInit 0 */
/* Peripheral clock disable */
__HAL_RCC_UART4_CLK_DISABLE();
/**UART4 GPIO Configuration
PH13 ------> UART4_TX
PH14 ------> UART4_RX
*/
HAL_GPIO_DeInit(GPIOH, GPIO_PIN_13|GPIO_PIN_14);
/* USER CODE BEGIN UART4_MspDeInit 1 */
/* USER CODE END UART4_MspDeInit 1 */
}
else if(huart->Instance==USART1)
{
/* USER CODE BEGIN USART1_MspDeInit 0 */
......
bsp/stm32/stm32h750-armfly-h7-tool/board/Kconfig
浏览文件 @ 99e2020d
......@@ -9,6 +9,26 @@ config SOC_STM32H750IB
menu "Onboard Peripheral Drivers"
config BSP_USING_SPI_FLASH
bool "Enable SPI FLASH (W25Q256 qspi)"
select BSP_USING_QSPI
select RT_USING_SFUD
select RT_SFUD_USING_QSPI
default n
config PHY_USING_LAN8720A
bool
menuconfig BSP_USING_ETH
bool "Enable Ethernet"
select RT_USING_LWIP
select PHY_USING_LAN8720A
default n
config BSP_USING_LCD
bool "Enable LCD"
select BSP_USING_PWM
default n
endmenu
menu "On-chip Peripheral Drivers"
......@@ -29,6 +49,72 @@ menu "On-chip Peripheral Drivers"
endif
config BSP_USING_QSPI
bool "Enable QSPI BUS"
select RT_USING_QSPI
select RT_USING_SPI
default n
config BSP_QSPI_USING_DMA
bool "Enable QSPI DMA support"
default n
menuconfig BSP_USING_I2C1
bool "Enable I2C1 BUS (software simulation)"
default n
select RT_USING_I2C
select RT_USING_I2C_BITOPS
select RT_USING_PIN
if BSP_USING_I2C1
config BSP_I2C1_SCL_PIN
int "i2c1 scl pin number"
range 1 216
default 135
config BSP_I2C1_SDA_PIN
int "I2C1 sda pin number"
range 1 216
default 95
endif
menuconfig BSP_USING_PWM
bool "Enable pwm"
default n
select RT_USING_PWM
if BSP_USING_PWM
menuconfig BSP_USING_PWM2
bool "Enable timer2 output pwm"
default n
if BSP_USING_PWM2
config BSP_USING_PWM2_CH2
bool "Enable PWM2 channel2"
default n
endif
endif
menuconfig BSP_USING_ADC
bool "Enable ADC"
default n
select RT_USING_ADC
if BSP_USING_ADC
config BSP_USING_ADC1
bool "Enable ADC1"
default n
config BSP_USING_ADC2
bool "Enable ADC2"
default n
config BSP_USING_ADC3
bool "Enable ADC3"
default n
endif
config BSP_USING_SDIO
bool "Enable SDIO"
select RT_USING_SDIO
select RT_USING_DFS
default n
source "../libraries/HAL_Drivers/Kconfig"
endmenu
......
bsp/stm32/stm32h750-armfly-h7-tool/board/board.c
浏览文件 @ 99e2020d
......@@ -28,10 +28,14 @@ void SystemClock_Config(void)
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE0);
while(!__HAL_PWR_GET_FLAG(PWR_FLAG_VOSRDY)) {}
/** Macro to configure the PLL clock source
*/
__HAL_RCC_PLL_PLLSOURCE_CONFIG(RCC_PLLSOURCE_HSE);
/** Initializes the CPU, AHB and APB busses clocks
*/
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI48|RCC_OSCILLATORTYPE_HSE;
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
RCC_OscInitStruct.HSI48State = RCC_HSI48_ON;
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
RCC_OscInitStruct.PLL.PLLM = 5;
......@@ -63,8 +67,23 @@ void SystemClock_Config(void)
{
Error_Handler();
}
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_USART1;
PeriphClkInitStruct.PeriphClockSelection = RCC_PERIPHCLK_UART4|RCC_PERIPHCLK_USART1
|RCC_PERIPHCLK_RNG|RCC_PERIPHCLK_SDMMC
|RCC_PERIPHCLK_ADC|RCC_PERIPHCLK_QSPI;
PeriphClkInitStruct.PLL2.PLL2M = 5;
PeriphClkInitStruct.PLL2.PLL2N = 192;
PeriphClkInitStruct.PLL2.PLL2P = 2;
PeriphClkInitStruct.PLL2.PLL2Q = 2;
PeriphClkInitStruct.PLL2.PLL2R = 2;
PeriphClkInitStruct.PLL2.PLL2RGE = RCC_PLL2VCIRANGE_2;
PeriphClkInitStruct.PLL2.PLL2VCOSEL = RCC_PLL2VCOWIDE;
PeriphClkInitStruct.PLL2.PLL2FRACN = 0;
PeriphClkInitStruct.QspiClockSelection = RCC_QSPICLKSOURCE_D1HCLK;
PeriphClkInitStruct.SdmmcClockSelection = RCC_SDMMCCLKSOURCE_PLL;
PeriphClkInitStruct.Usart234578ClockSelection = RCC_USART234578CLKSOURCE_D2PCLK1;
PeriphClkInitStruct.Usart16ClockSelection = RCC_USART16CLKSOURCE_D2PCLK2;
PeriphClkInitStruct.RngClockSelection = RCC_RNGCLKSOURCE_HSI48;
PeriphClkInitStruct.AdcClockSelection = RCC_ADCCLKSOURCE_PLL2;
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct) != HAL_OK)
{
Error_Handler();
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或