startup_stm32f10x_ld_vl.s

/**
 ******************************************************************************
 * @file      startup_stm32f10x_ld_vl.s
 * @author    MCD Application Team
 * @version   V3.4.0
 * @date      10/15/2010
 * @brief     STM32F10x Low Density Value Line Devices vector table for RIDE7
 *            toolchain.
 *            This module performs:
 *                - Set the initial SP
 *                - Set the initial PC == Reset_Handler,
 *                - Set the vector table entries with the exceptions ISR address
 *                - Configure the clock system 
 *                - Branches to main in the C library (which eventually
 *                  calls main()).
 *            After Reset the Cortex-M3 processor is in Thread mode,
 *            priority is Privileged, and the Stack is set to Main.
 *******************************************************************************
 * @copy
 *
 * THE PRESENT FIRMWARE WHICH IS FOR GUIDANCE ONLY AIMS AT PROVIDING CUSTOMERS
 * WITH CODING INFORMATION REGARDING THEIR PRODUCTS IN ORDER FOR THEM TO SAVE
 * TIME. AS A RESULT, STMICROELECTRONICS SHALL NOT BE HELD LIABLE FOR ANY
 * DIRECT, INDIRECT OR CONSEQUENTIAL DAMAGES WITH RESPECT TO ANY CLAIMS ARISING
 * FROM THE CONTENT OF SUCH FIRMWARE AND/OR THE USE MADE BY CUSTOMERS OF THE
 * CODING INFORMATION CONTAINED HEREIN IN CONNECTION WITH THEIR PRODUCTS.
 *
 * <h2><center>&copy; COPYRIGHT 2010 STMicroelectronics</center></h2>
 */
    
  .syntax unified
  .cpu cortex-m3
  .fpu softvfp
  .thumb

.global  g_pfnVectors
.global  Default_Handler

/* start address for the initialization values of the .data section. 
defined in linker script */
.word  _sidata
/* start address for the .data section. defined in linker script */  
.word  _sdata
/* end address for the .data section. defined in linker script */
.word  _edata
/* start address for the .bss section. defined in linker script */
.word  _sbss
/* end address for the .bss section. defined in linker script */
.word  _ebss

.equ  BootRAM, 0xF108F85F
/**
 * @brief  This is the code that gets called when the processor first
 *          starts execution following a reset event. Only the absolutely
 *          necessary set is performed, after which the application
 *          supplied main() routine is called. 
 * @param  None
 * @retval None
*/

  .section  .text.Reset_Handler
  .weak  Reset_Handler
  .type  Reset_Handler, %function
Reset_Handler:  

/* Copy the data segment initializers from flash to SRAM */  
  movs  r1, #0
  b     LoopCopyDataInit

CopyDataInit:
  ldr   r3, =_sidata
  ldr   r3, [r3, r1]
  str   r3, [r0, r1]
  adds  r1, r1, #4
    
LoopCopyDataInit:
  ldr   r0, =_sdata
  ldr   r3, =_edata
  adds  r2, r0, r1
  cmp   r2, r3
  bcc   CopyDataInit
  ldr   r2, =_sbss
  b     LoopFillZerobss
/* Zero fill the bss segment. */  
FillZerobss:
  movs  r3, #0
  str   r3, [r2], #4
    
LoopFillZerobss:
  ldr   r3, = _ebss
  cmp   r2, r3
  bcc   FillZerobss
/* Call the clock system intitialization function.*/
  bl  SystemInit   
/* Call the application's entry point.*/
  bl    main
  bx    lr    
.size  Reset_Handler, .-Reset_Handler

/**
 * @brief  This is the code that gets called when the processor receives an 
 *         unexpected interrupt. This simply enters an infinite loop, preserving
 *         the system state for examination by a debugger.
 * @param  None     
 * @retval None       
*/
  .section  .text.Default_Handler,"ax",%progbits
Default_Handler:
Infinite_Loop:
  b  Infinite_Loop
  .size  Default_Handler, .-Default_Handler
/******************************************************************************
* The minimal vector table for a Cortex M3. Note that the proper constructs
* must be placed on this to ensure that it ends up at physical address
* 0x0000.0000.
* 
******************************************************************************/    
  .section  .isr_vector,"a",%progbits
  .type  g_pfnVectors, %object
  .size  g_pfnVectors, .-g_pfnVectors

g_pfnVectors:
  .word  _estack
  .word  Reset_Handler
  .word  NMI_Handler
  .word  HardFault_Handler
  .word  MemManage_Handler
  .word  BusFault_Handler
  .word  UsageFault_Handler
  .word  0
  .word  0
  .word  0
  .word  0
  .word  SVC_Handler
  .word  DebugMon_Handler
  .word  0
  .word  PendSV_Handler
  .word  SysTick_Handler
  .word  WWDG_IRQHandler
  .word  PVD_IRQHandler
  .word  TAMPER_IRQHandler
  .word  RTC_IRQHandler
  .word  FLASH_IRQHandler
  .word  RCC_IRQHandler
  .word  EXTI0_IRQHandler
  .word  EXTI1_IRQHandler
  .word  EXTI2_IRQHandler
  .word  EXTI3_IRQHandler
  .word  EXTI4_IRQHandler
  .word  DMA1_Channel1_IRQHandler
  .word  DMA1_Channel2_IRQHandler
  .word  DMA1_Channel3_IRQHandler
  .word  DMA1_Channel4_IRQHandler
  .word  DMA1_Channel5_IRQHandler
  .word  DMA1_Channel6_IRQHandler
  .word  DMA1_Channel7_IRQHandler
  .word  ADC1_IRQHandler
  .word  0
  .word  0
  .word  0
  .word  0
  .word  EXTI9_5_IRQHandler
  .word  TIM1_BRK_TIM15_IRQHandler
  .word  TIM1_UP_TIM16_IRQHandler
  .word  TIM1_TRG_COM_TIM17_IRQHandler
  .word  TIM1_CC_IRQHandler
  .word  TIM2_IRQHandler
  .word  TIM3_IRQHandler
  .word  0
  .word  I2C1_EV_IRQHandler
  .word  I2C1_ER_IRQHandler
  .word  0
  .word  0
  .word  SPI1_IRQHandler
  .word  0
  .word  USART1_IRQHandler
  .word  USART2_IRQHandler
  .word  0
  .word  EXTI15_10_IRQHandler
  .word  RTCAlarm_IRQHandler
  .word  CEC_IRQHandler
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  TIM6_DAC_IRQHandler
  .word  TIM7_IRQHandler
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  0
  .word  BootRAM          /* @0x01CC. This is for boot in RAM mode for 
                            STM32F10x Low Density Value Line devices. */
   
/*******************************************************************************
* Provide weak aliases for each Exception handler to the Default_Handler. 
* As they are weak aliases, any function with the same name will override 
* this definition.
*******************************************************************************/
    
  .weak  NMI_Handler
  .thumb_set NMI_Handler,Default_Handler
  
  .weak  HardFault_Handler
  .thumb_set HardFault_Handler,Default_Handler
  
  .weak  MemManage_Handler
  .thumb_set MemManage_Handler,Default_Handler
  
  .weak  BusFault_Handler
  .thumb_set BusFault_Handler,Default_Handler

  .weak  UsageFault_Handler
  .thumb_set UsageFault_Handler,Default_Handler

  .weak  SVC_Handler
  .thumb_set SVC_Handler,Default_Handler

  .weak  DebugMon_Handler
  .thumb_set DebugMon_Handler,Default_Handler

  .weak  PendSV_Handler
  .thumb_set PendSV_Handler,Default_Handler

  .weak  SysTick_Handler
  .thumb_set SysTick_Handler,Default_Handler

  .weak  WWDG_IRQHandler
  .thumb_set WWDG_IRQHandler,Default_Handler

  .weak  PVD_IRQHandler
  .thumb_set PVD_IRQHandler,Default_Handler

  .weak  TAMPER_IRQHandler
  .thumb_set TAMPER_IRQHandler,Default_Handler

  .weak  RTC_IRQHandler
  .thumb_set RTC_IRQHandler,Default_Handler

  .weak  FLASH_IRQHandler
  .thumb_set FLASH_IRQHandler,Default_Handler

  .weak  RCC_IRQHandler
  .thumb_set RCC_IRQHandler,Default_Handler

  .weak  EXTI0_IRQHandler
  .thumb_set EXTI0_IRQHandler,Default_Handler

  .weak  EXTI1_IRQHandler
  .thumb_set EXTI1_IRQHandler,Default_Handler

  .weak  EXTI2_IRQHandler
  .thumb_set EXTI2_IRQHandler,Default_Handler

  .weak  EXTI3_IRQHandler
  .thumb_set EXTI3_IRQHandler,Default_Handler

  .weak  EXTI4_IRQHandler
  .thumb_set EXTI4_IRQHandler,Default_Handler

  .weak  DMA1_Channel1_IRQHandler
  .thumb_set DMA1_Channel1_IRQHandler,Default_Handler

  .weak  DMA1_Channel2_IRQHandler
  .thumb_set DMA1_Channel2_IRQHandler,Default_Handler

  .weak  DMA1_Channel3_IRQHandler
  .thumb_set DMA1_Channel3_IRQHandler,Default_Handler

  .weak  DMA1_Channel4_IRQHandler
  .thumb_set DMA1_Channel4_IRQHandler,Default_Handler

  .weak  DMA1_Channel5_IRQHandler
  .thumb_set DMA1_Channel5_IRQHandler,Default_Handler

  .weak  DMA1_Channel6_IRQHandler
  .thumb_set DMA1_Channel6_IRQHandler,Default_Handler

  .weak  DMA1_Channel7_IRQHandler
  .thumb_set DMA1_Channel7_IRQHandler,Default_Handler

  .weak  ADC1_IRQHandler
  .thumb_set ADC1_IRQHandler,Default_Handler

  .weak  EXTI9_5_IRQHandler
  .thumb_set EXTI9_5_IRQHandler,Default_Handler

  .weak  TIM1_BRK_TIM15_IRQHandler
  .thumb_set TIM1_BRK_TIM15_IRQHandler,Default_Handler

  .weak  TIM1_UP_TIM16_IRQHandler
  .thumb_set TIM1_UP_TIM16_IRQHandler,Default_Handler

  .weak  TIM1_TRG_COM_TIM17_IRQHandler
  .thumb_set TIM1_TRG_COM_TIM17_IRQHandler,Default_Handler

  .weak  TIM1_CC_IRQHandler
  .thumb_set TIM1_CC_IRQHandler,Default_Handler

  .weak  TIM2_IRQHandler
  .thumb_set TIM2_IRQHandler,Default_Handler

  .weak  TIM3_IRQHandler
  .thumb_set TIM3_IRQHandler,Default_Handler

  .weak  I2C1_EV_IRQHandler
  .thumb_set I2C1_EV_IRQHandler,Default_Handler

  .weak  I2C1_ER_IRQHandler
  .thumb_set I2C1_ER_IRQHandler,Default_Handler

  .weak  SPI1_IRQHandler
  .thumb_set SPI1_IRQHandler,Default_Handler

  .weak  USART1_IRQHandler
  .thumb_set USART1_IRQHandler,Default_Handler

  .weak  USART2_IRQHandler
  .thumb_set USART2_IRQHandler,Default_Handler

  .weak  EXTI15_10_IRQHandler
  .thumb_set EXTI15_10_IRQHandler,Default_Handler

  .weak  RTCAlarm_IRQHandler
  .thumb_set RTCAlarm_IRQHandler,Default_Handler

  .weak  CEC_IRQHandler
  .thumb_set CEC_IRQHandler,Default_Handler

  .weak  TIM6_DAC_IRQHandler
  .thumb_set TIM6_DAC_IRQHandler,Default_Handler

  .weak  TIM7_IRQHandler
  .thumb_set TIM7_IRQHandler,Default_Handler  
  
/******************* (C) COPYRIGHT 2010 STMicroelectronics *****END OF FILE****/