app-vacuumdb.md

## vacuumdb

vacuumdb — garbage-collect and analyze a PostgreSQL database

## Synopsis

`vacuumdb` [*`connection-option`*...] [*`option`*...] [ `-t` | `--table` *`table`* [( *`column`* [,...] )] ] ... [*`dbname`*]

`vacuumdb` [*`connection-option`*...] [*`option`*...] `-a` | `--all`

## Description

vacuumdb is a utility for cleaning a PostgreSQL database. vacuumdb will also generate internal statistics used by the PostgreSQL query optimizer.

vacuumdb is a wrapper around the SQL command [`VACUUM`](sql-vacuum.html). There is no effective difference between vacuuming and analyzing databases via this utility and via other methods for accessing the server.

## Options

vacuumdb accepts the following command-line arguments:

`-a`  
`--all`

 Vacuum all databases.

`[-d] *`dbname`*`  
`[--dbname=]*`dbname`*`

 Specifies the name of the database to be cleaned or analyzed, when `-a`/`--all` is not used. If this is not specified, the database name is read from the environment variable `PGDATABASE`. If that is not set, the user name specified for the connection is used. The *`dbname`* can be a [connection string](libpq-connect.html#LIBPQ-CONNSTRING). If so, connection string parameters will override any conflicting command line options.

`--disable-page-skipping`

 Disable skipping pages based on the contents of the visibility map.

### Note

 This option is only available for servers running PostgreSQL 9.6 and later.

`-e`  
`--echo`

 Echo the commands that vacuumdb generates and sends to the server.

`-f`  
`--full`

 Perform “full” vacuuming.

`-F`  
`--freeze`

 Aggressively “freeze” tuples.

`--force-index-cleanup`

 Always remove index entries pointing to dead tuples.

### Note

 This option is only available for servers running PostgreSQL 12 and later.

`-j *`njobs`*`  
`--jobs=*`njobs`*`

 Execute the vacuum or analyze commands in parallel by running *`njobs`* commands simultaneously. This option may reduce the processing time but it also increases the load on the database server.

vacuumdb will open *`njobs`* connections to the database, so make sure your [max\_connections](runtime-config-connection.html#GUC-MAX-CONNECTIONS) setting is high enough to accommodate all connections.

 Note that using this mode together with the `-f` (`FULL`) option might cause deadlock failures if certain system catalogs are processed in parallel.

`--min-mxid-age *`mxid_age`*`

 Only execute the vacuum or analyze commands on tables with a multixact ID age of at least *`mxid_age`*. This setting is useful for prioritizing tables to process to prevent multixact ID wraparound (see [Section 25.1.5.1](routine-vacuuming.html#VACUUM-FOR-MULTIXACT-WRAPAROUND)).

 For the purposes of this option, the multixact ID age of a relation is the greatest of the ages of the main relation and its associated TOAST table, if one exists. Since the commands issued by vacuumdb will also process the TOAST table for the relation if necessary, it does not need to be considered separately.

### Note

 This option is only available for servers running PostgreSQL 9.6 and later.

`--min-xid-age *`xid_age`*`

 Only execute the vacuum or analyze commands on tables with a transaction ID age of at least *`xid_age`*. This setting is useful for prioritizing tables to process to prevent transaction ID wraparound (see [Section 25.1.5](routine-vacuuming.html#VACUUM-FOR-WRAPAROUND)).

 For the purposes of this option, the transaction ID age of a relation is the greatest of the ages of the main relation and its associated TOAST table, if one exists. Since the commands issued by vacuumdb will also process the TOAST table for the relation if necessary, it does not need to be considered separately.

### Note

 This option is only available for servers running PostgreSQL 9.6 and later.

`--no-index-cleanup`

 Do not remove index entries pointing to dead tuples.

### Note

 This option is only available for servers running PostgreSQL 12 and later.

`--no-process-toast`

 Skip the TOAST table associated with the table to vacuum, if any.

### Note

 This option is only available for servers running PostgreSQL 14 and later.

`--no-truncate`

 Do not truncate empty pages at the end of the table.

### Note

 This option is only available for servers running PostgreSQL 12 and later.

`-P *`parallel_workers`*`  
`--parallel=*`parallel_workers`*`

 Specify the number of parallel workers for *parallel vacuum*. This allows the vacuum to leverage multiple CPUs to process indexes. See [VACUUM](sql-vacuum.html).

### Note

 This option is only available for servers running PostgreSQL 13 and later.

`-q`  
`--quiet`

 Do not display progress messages.

`--skip-locked`

 Skip relations that cannot be immediately locked for processing.

### Note

 This option is only available for servers running PostgreSQL 12 and later.

`-t *`table`* [ (*`column`* [,...]) ]`  
`--table=*`table`* [ (*`column`* [,...]) ]`

 Clean or analyze *`table`* only. Column names can be specified only in conjunction with the `--analyze` or `--analyze-only` options. Multiple tables can be vacuumed by writing multiple `-t` switches.

### Tip

 If you specify columns, you probably have to escape the parentheses from the shell. (See examples below.)

`-v`  
`--verbose`

 Print detailed information during processing.

`-V`  
`--version`

 Print the vacuumdb version and exit.

`-z`  
`--analyze`

 Also calculate statistics for use by the optimizer.

`-Z`  
`--analyze-only`

 Only calculate statistics for use by the optimizer (no vacuum).

`--analyze-in-stages`

 Only calculate statistics for use by the optimizer (no vacuum), like `--analyze-only`. Run several (currently three) stages of analyze with different configuration settings, to produce usable statistics faster.

 This option is useful to analyze a database that was newly populated from a restored dump or by `pg_upgrade`. This option will try to create some statistics as fast as possible, to make the database usable, and then produce full statistics in the subsequent stages.

`-?`  
`--help`

 Show help about vacuumdb command line arguments, and exit.

vacuumdb also accepts the following command-line arguments for connection parameters:

`-h *`host`*`  
`--host=*`host`*`

 Specifies the host name of the machine on which the server is running. If the value begins with a slash, it is used as the directory for the Unix domain socket.

`-p *`port`*`  
`--port=*`port`*`

 Specifies the TCP port or local Unix domain socket file extension on which the server is listening for connections.

`-U *`username`*`  
`--username=*`username`*`

 User name to connect as.

`-w`  
`--no-password`

 Never issue a password prompt. If the server requires password authentication and a password is not available by other means such as a `.pgpass` file, the connection attempt will fail. This option can be useful in batch jobs and scripts where no user is present to enter a password.

`-W`  
`--password`

 Force vacuumdb to prompt for a password before connecting to a database.

 This option is never essential, since vacuumdb will automatically prompt for a password if the server demands password authentication. However, vacuumdb will waste a connection attempt finding out that the server wants a password. In some cases it is worth typing `-W` to avoid the extra connection attempt.

`--maintenance-db=*`dbname`*`

 Specifies the name of the database to connect to to discover which databases should be vacuumed, when `-a`/`--all` is used. If not specified, the `postgres` database will be used, or if that does not exist, `template1` will be used. This can be a [connection string](libpq-connect.html#LIBPQ-CONNSTRING). If so, connection string parameters will override any conflicting command line options. Also, connection string parameters other than the database name itself will be re-used when connecting to other databases.

## Environment

`PGDATABASE`  
`PGHOST`  
`PGPORT`  
`PGUSER`

 Default connection parameters

`PG_COLOR`

 Specifies whether to use color in diagnostic messages. Possible values are `always`, `auto` and `never`.

 This utility, like most other PostgreSQL utilities, also uses the environment variables supported by libpq (see [Section 34.15](libpq-envars.html)).

## Diagnostics

 In case of difficulty, see [VACUUM](sql-vacuum.html) and [psql](app-psql.html) for discussions of potential problems and error messages. The database server must be running at the targeted host. Also, any default connection settings and environment variables used by the libpq front-end library will apply.

## Notes

vacuumdb might need to connect several times to the PostgreSQL server, asking for a password each time. It is convenient to have a `~/.pgpass` file in such cases. See [Section 34.16](libpq-pgpass.html) for more information.

## Examples

 To clean the database `test`:

```
$ vacuumdb test

```

 To clean and analyze for the optimizer a database named `bigdb`:

```
$ vacuumdb --analyze bigdb

```

 To clean a single table `foo` in a database named `xyzzy`, and analyze a single column `bar` of the table for the optimizer:

```
$ vacuumdb --analyze --verbose --table='foo(bar)' xyzzy

```

## See Also

[VACUUM](sql-vacuum.html)