add remote for stm32_netradio

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@362 bbd45198-f89e-11dd-88c7-29a3b14d5316

bsp/stm32_radio/key.c

@@ -17,6 +17,12 @@ key_left    PC3
 #define key_right_GETVALUE()  GPIO_ReadInputDataBit(GPIOG,GPIO_Pin_14)
 #define key_left_GETVALUE()   GPIO_ReadInputDataBit(GPIOG,GPIO_Pin_13)
 
+/* from remote.c */
+extern void rem_start(void);
+extern void rem_encoder(struct rtgui_event_kbd * p);
+extern unsigned int rem_mode;
+/* from remote.c */
+
 static void key_thread_entry(void *parameter)
 {
     rt_time_t next_delay;
@@ -40,6 +46,8 @@ static void key_thread_entry(void *parameter)
     GPIO_Init(GPIOE,&GPIO_InitStructure);
     GPIO_SetBits(GPIOE,GPIO_Pin_2);
 
+    rem_start();
+
     /* init keyboard event */
     RTGUI_EVENT_KBD_INIT(&kbd_event);
     kbd_event.mod  = RTGUI_KMOD_NONE;
@@ -49,8 +57,13 @@ static void key_thread_entry(void *parameter)
     {
         next_delay = 10;
         kbd_event.key = RTGUIK_UNKNOWN;
-
         kbd_event.type = RTGUI_KEYDOWN;
+
+        if( rem_mode== 2 )
+        {
+            rem_encoder(&kbd_event);
+        }
+
         if ( key_enter_GETVALUE() == 0 )
         {
             rt_thread_delay( next_delay*4 );
@@ -110,7 +123,7 @@ static void key_thread_entry(void *parameter)
     }
 }
 
-void rt_hw_key_init()
+void rt_hw_key_init(void)
 {
     rt_thread_t key_tid;
     key_tid = rt_thread_create("key",

bsp/stm32_radio/project.Uv2

@@ -46,6 +46,7 @@ File 1,1,<.\play_list.c><play_list.c>
 File 1,1,<.\ili9325\ili9320.c><ili9320.c>
 File 1,1,<.\codec.c><codec.c>
 File 1,1,<.\spi_flash.c><spi_flash.c>
+File 1,1,<.\remote.c><remote.c>
 File 2,1,<..\..\src\clock.c><clock.c>
 File 2,1,<..\..\src\idle.c><idle.c>
 File 2,1,<..\..\src\ipc.c><ipc.c>
@@ -307,8 +308,8 @@ Options 1,0,0  // Target 'RT-Thread STM32 Radio'
  ADSLDIF ()
  ADSLDDW ()
   OPTDL (SARMCM3.DLL)()(DARMSTM.DLL)(-pSTM32F103ZE)(SARMCM3.DLL)()(TARMSTM.DLL)(-pSTM32F103ZE)
-  OPTDBG 48118,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()()
- FLASH1 { 1,0,0,0,1,0,0,0,5,16,0,0,0,0,0,0,0,0,0,0 }
+  OPTDBG 49142,7,()()()()()()()()()() (Segger\JL2CM3.dll)()()()
+ FLASH1 { 1,0,0,0,1,0,0,0,6,16,0,0,0,0,0,0,0,0,0,0 }
  FLASH2 (Segger\JL2CM3.dll)
  FLASH3 ("" ())
  FLASH4 ()

bsp/stm32_radio/stm32f10x_conf.h

@@ -42,7 +42,7 @@
 #include "stm32f10x_rtc.h"
 #include "stm32f10x_sdio.h"
 #include "stm32f10x_spi.h"
-/* #include "stm32f10x_tim.h" */
+#include "stm32f10x_tim.h"
 #include "stm32f10x_usart.h"
 /* #include "stm32f10x_wwdg.h" */
 #include "misc.h" /* High level functions for NVIC and SysTick (add-on to CMSIS functions) */
@@ -64,11 +64,11 @@
   *   If expr is true, it returns no value.
   * @retval None
   */
-  #define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
+#define assert_param(expr) ((expr) ? (void)0 : assert_failed((uint8_t *)__FILE__, __LINE__))
 /* Exported functions ------------------------------------------------------- */
-  void assert_failed(uint8_t* file, uint32_t line);
+void assert_failed(uint8_t* file, uint32_t line);
 #else
-  #define assert_param(expr) ((void)0)
+#define assert_param(expr) ((void)0)
 #endif /* USE_FULL_ASSERT */
 
 #endif /* __STM32F10x_CONF_H */

bsp/stm32_radio/stm32f10x_it.c

@@ -700,7 +700,7 @@ void DMA2_Channel2_IRQHandler(void)
 }
 #endif
 
-/* add on 2009-12-31 usb */
+/* add on 2009-12-31 for usb */
 extern void CTR_HP(void);
 extern void USB_Istr(void);
 void USB_HP_CAN1_TX_IRQHandler(void)
@@ -712,3 +712,10 @@ void USB_LP_CAN1_RX0_IRQHandler(void)
 {
     USB_Istr();
 }
+
+/* add on 2010-01-02 for remote */
+extern void remote_isr(void);
+void TIM5_IRQHandler(void)
+{
+    remote_isr();
+}