Skip to content

R
rt-thread

天中雨水 / rt-thread
该项目与 Fork 源项目分叉

Fork自 RT-Thread / rt-thread

通知 2
Star 1
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 af58caab 编写于 作者: G gary.li.wenchao.4
浏览文件
操作

Modified start_gcc.s for mini2440 

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@451 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 ca696234
隐藏空白更改
内联 并排
Showing with 256 addition and 217 deletion
libcpu/arm/s3c24x0/start_gcc.s
浏览文件 @ af58caab
......@@ -5,64 +5,97 @@
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://openlab.rt-thread.com/license/LICENSE
* http:/*openlab.rt-thread.com/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2006-03-13 Bernard first version
* 2006-10-05 Alsor.Z for s3c2410 initialize
* 2006-10-05 Alsor.Z for s3c2440 initialize
* 2008-01-29 Yi.Qiu for QEMU emulator
*/
/**
* @addtogroup S3C2410
#define CONFIG_STACKSIZE 512
#define S_FRAME_SIZE 72
#define S_OLD_R0 68
#define S_PSR 64
#define S_PC 60
#define S_LR 56
#define S_SP 52
#define S_IP 48
#define S_FP 44
#define S_R10 40
#define S_R9 36
#define S_R8 32
#define S_R7 28
#define S_R6 24
#define S_R5 20
#define S_R4 16
#define S_R3 12
#define S_R2 8
#define S_R1 4
#define S_R0 0
.equ USERMODE, 0x10
.equ FIQMODE, 0x11
.equ IRQMODE, 0x12
.equ SVCMODE, 0x13
.equ ABORTMODE, 0x17
.equ UNDEFMODE, 0x1b
.equ MODEMASK, 0x1f
.equ NOINT, 0xc0
.equ RAM_BASE, 0x00000000 /*Start address of RAM */
.equ ROM_BASE, 0x30000000 /*Start address of Flash */
.equ MPLLCON, 0x4c000004 /*Mpll control register */
.equ M_MDIV, 0x20
.equ M_PDIV, 0x4
.equ M_SDIV, 0x2
.equ INTMSK, 0x4a000008
.equ INTSUBMSK, 0x4a00001c
.equ WTCON, 0x53000000
.equ LOCKTIME, 0x4c000000
.equ CLKDIVN, 0x4c000014 /*Clock divider control */
.equ GPHCON, 0x56000070 /*Port H control */
.equ GPHUP, 0x56000078 /*Pull-up control H */
.equ BWSCON, 0x48000000 /*Bus width & wait status */
.equ BANKCON0, 0x48000004 /*Boot ROM control */
.equ BANKCON1, 0x48000008 /*BANK1 control */
.equ BANKCON2, 0x4800000c /*BANK2 cControl */
.equ BANKCON3, 0x48000010 /*BANK3 control */
.equ BANKCON4, 0x48000014 /*BANK4 control */
.equ BANKCON5, 0x48000018 /*BANK5 control */
.equ BANKCON6, 0x4800001c /*BANK6 control */
.equ BANKCON7, 0x48000020 /*BANK7 control */
.equ REFRESH, 0x48000024 /*DRAM/SDRAM efresh */
.equ BANKSIZE, 0x48000028 /*Flexible Bank Size */
.equ MRSRB6, 0x4800002c /*Mode egister set for SDRAM*/
.equ MRSRB7, 0x48000030 /*Mode egister set for SDRAM*/
/*
*************************************************************************
*
* Jump vector table
*
*************************************************************************
*/
/*@{*/
#define CONFIG_STACKSIZE 512
#define S_FRAME_SIZE 72
#define S_OLD_R0 68
#define S_PSR 64
#define S_PC 60
#define S_LR 56
#define S_SP 52
#define S_IP 48
#define S_FP 44
#define S_R10 40
#define S_R9 36
#define S_R8 32
#define S_R7 28
#define S_R6 24
#define S_R5 20
#define S_R4 16
#define S_R3 12
#define S_R2 8
#define S_R1 4
#define S_R0 0
.equ USERMODE, 0x10
.equ FIQMODE, 0x11
.equ IRQMODE, 0x12
.equ SVCMODE, 0x13
.equ ABORTMODE, 0x17
.equ UNDEFMODE, 0x1b
.equ MODEMASK, 0x1f
.equ NOINT, 0xc0
.section .init, "ax"
.code 32
.globl _start
_start:
b reset
ldr pc, _vector_undef
ldr pc, _vector_swi
ldr pc, _vector_pabt
ldr pc, _vector_dabt
ldr pc, _vector_resv
ldr pc, _vector_irq
ldr pc, _vector_fiq
b reset
ldr pc, _vector_undef
ldr pc, _vector_swi
ldr pc, _vector_pabt
ldr pc, _vector_dabt
ldr pc, _vector_resv
ldr pc, _vector_irq
ldr pc, _vector_fiq
_vector_undef: .word vector_undef
_vector_swi: .word vector_swi
......@@ -72,7 +105,18 @@ _vector_resv: .word vector_resv
_vector_irq: .word vector_irq
_vector_fiq: .word vector_fiq
.balignl 16,0xdeadbeef
.balignl 16,0xdeadbeef
/*
*************************************************************************
*
* Startup Code (reset vector)
* relocate armboot to ram
* setup stack
* jump to second stage
*
*************************************************************************
*/
_TEXT_BASE:
.word TEXT_BASE
......@@ -82,104 +126,95 @@ _TEXT_BASE:
* which are defined in linker script
*/
.globl _rtthread_start
_rtthread_start:.word _start
_rtthread_start:
.word _start
.globl _rtthread_end
_rtthread_end: .word _end
_rtthread_end:
.word _end
/*
* rtthread bss start and end
* which are defined in linker script
* rtthread bss start and end which are defined in linker script
*/
.globl _bss_start
_bss_start: .word __bss_start
_bss_start:
.word __bss_start
.globl _bss_end
_bss_end: .word __bss_end
_bss_end:
.word __bss_end
/* IRQ stack memory (calculated at run-time) */
/* IRQ stack memory (calculated at run-time) */
.globl IRQ_STACK_START
IRQ_STACK_START:.word _irq_stack_start + 1024
IRQ_STACK_START:
.word _irq_stack_start + 1024
.globl FIQ_STACK_START
FIQ_STACK_START:.word _fiq_stack_start + 1024
FIQ_STACK_START:
.word _fiq_stack_start + 1024
.globl UNDEFINED_STACK_START
UNDEFINED_STACK_START:.word _undefined_stack_start + CONFIG_STACKSIZE
UNDEFINED_STACK_START:
.word _undefined_stack_start + CONFIG_STACKSIZE
.globl ABORT_STACK_START
ABORT_STACK_START:.word _abort_stack_start + CONFIG_STACKSIZE
ABORT_STACK_START:
.word _abort_stack_start + CONFIG_STACKSIZE
.globl _STACK_START
_STACK_START:.word _svc_stack_start + 4096
.equ RAM_BASE, 0x00000000 //Start address of RAM
.equ ROM_BASE, 0x30000000 //Start address of Flash
.equ INTMSK, 0x4a000008
.equ WTCON, 0x53000000
.equ INTSUBMSK, 0x4a00001c
.equ LOCKTIME, 0x4c000000
.equ MPLLCON, 0x4c000004
.equ M_MDIV, 0x20
.equ M_PDIV, 0x4
.equ M_SDIV, 0x2
.equ CLKDIVN, 0x4c000014 //Clock divider control
.equ GPHCON, 0x56000070 //Port H control
.equ GPHUP, 0x56000078 //Pull-up control H
.equ BWSCON, 0x48000000 //Bus width & wait status
.equ BANKCON0, 0x48000004 //Boot ROM control
.equ BANKCON1, 0x48000008 //BANK1 control
.equ BANKCON2, 0x4800000c //BANK2 cControl
.equ BANKCON3, 0x48000010 //BANK3 control
.equ BANKCON4, 0x48000014 //BANK4 control
.equ BANKCON5, 0x48000018 //BANK5 control
.equ BANKCON6, 0x4800001c //BANK6 control
.equ BANKCON7, 0x48000020 //BANK7 control
.equ REFRESH, 0x48000024 //DRAM/SDRAM efresh
.equ BANKSIZE, 0x48000028 //Flexible Bank Size
.equ MRSRB6, 0x4800002c //Mode egister set for SDRAM
.equ MRSRB7, 0x48000030 //Mode egister set for SDRAM
/* -----------------entry--------------- */
_STACK_START:
.word _svc_stack_start + 4096
/* ----------------------------------entry------------------------------*/
reset:
/* watch dog disable */
ldr r0,=WTCON
ldr r1,=0x0
str r1,[r0]
/* set the cpu to SVC32 mode */
mrs r0,cpsr
bic r0,r0,#MODEMASK
orr r0,r0,#SVCMODE
msr cpsr,r0
/* mask all IRQs by clearing all bits in the INTMRs */
ldr r1, =INTMSK
ldr r0, =0xffffffff
str r0, [r1]
/* set interrupt vector */
ldr r0, _load_address
mov r1, #0x0 /* target address */
add r2, r0, #0x20 /* size, 32bytes */
/* set the cpu to SVC32 mode */
mrs r0,cpsr
bic r0,r0,#MODEMASK
orr r0,r0,#SVCMODE
msr cpsr,r0
/* watch dog disable */
ldr r0,=WTCON
ldr r1,=0x0
str r1,[r0]
/* mask all IRQs by clearing all bits in the INTMRs */
ldr r1, =INTMSK
ldr r0, =0xffffffff
str r0, [r1]
ldr r1, =INTSUBMSK
ldr r0, =0x7fff /*all sub interrupt disable */
str r0, [r1]
/* set interrupt vector */
ldr r0, _load_address
mov r1, #0x0 /* target address */
add r2, r0, #0x20 /* size, 32bytes */
copy_loop:
ldmia r0!, {r3-r10} /* copy from source address [r0] */
stmia r1!, {r3-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end addreee [r2] */
ble copy_loop
ldmia r0!, {r3-r10} /* copy from source address [r0] */
stmia r1!, {r3-r10} /* copy to target address [r1] */
cmp r0, r2 /* until source end addreee [r2] */
ble copy_loop
/* setup stack */
bl stack_setup
bl stack_setup
/* clear .bss */
mov r0,#0 /* get a zero */
ldr r1,=__bss_start /* bss start */
ldr r2,=__bss_end /* bss end */
mov r0,#0 /* get a zero */
ldr r1,=__bss_start /* bss start */
ldr r2,=__bss_end /* bss end */
bss_loop:
cmp r1,r2 /* check if data to clear */
strlo r0,[r1],#4 /* clear 4 bytes */
blo bss_loop /* loop until done */
cmp r1,r2 /* check if data to clear */
strlo r0,[r1],#4 /* clear 4 bytes */
blo bss_loop /* loop until done */
/* call C++ constructors of global objects */
/* call C++ constructors of global objects */
ldr r0, =__ctors_start__
ldr r1, =__ctors_end__
ctor_loop:
cmp r0, r1
beq ctor_end
......@@ -188,17 +223,21 @@ ctor_loop:
mov lr, pc
bx r2
ldmfd sp!, {r0-r1}
b ctor_loop
b ctor_loop
ctor_end:
/* start RT-Thread Kernel */
ldr pc, _rtthread_startup
/* start RT-Thread Kernel */
ldr pc, _rtthread_startup
_rtthread_startup: .word rtthread_startup
_rtthread_startup:
.word rtthread_startup
#if defined (__FLASH_BUILD__)
_load_address: .word ROM_BASE + _TEXT_BASE
_load_address:
.word ROM_BASE + _TEXT_BASE
#else
_load_address: .word RAM_BASE + _TEXT_BASE
_load_address:
.word RAM_BASE + _TEXT_BASE
#endif
/*
......@@ -209,63 +248,63 @@ _load_address: .word RAM_BASE + _TEXT_BASE
*************************************************************************
*/
/* exception handlers */
/* exception handlers */
.align 5
vector_undef:
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ Calling r0-r12
add r8, sp, #S_PC
stmdb r8, {sp, lr}^ @ Calling SP, LR
str lr, [r8, #0] @ Save calling PC
mrs r6, spsr
str r6, [r8, #4] @ Save CPSR
str r0, [r8, #8] @ Save OLD_R0
mov r0, sp
bl rt_hw_trap_udef
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} /* Calling r0-r12 */
add r8, sp, #S_PC
stmdb r8, {sp, lr}^ /* Calling SP, LR */
str lr, [r8, #0] /* Save calling PC */
mrs r6, spsr
str r6, [r8, #4] /* Save CPSR */
str r0, [r8, #8] /* Save OLD_R0 */
mov r0, sp
bl rt_hw_trap_udef
.align 5
vector_swi:
bl rt_hw_trap_swi
bl rt_hw_trap_swi
.align 5
vector_pabt:
bl rt_hw_trap_pabt
bl rt_hw_trap_pabt
.align 5
vector_dabt:
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ Calling r0-r12
add r8, sp, #S_PC
stmdb r8, {sp, lr}^ @ Calling SP, LR
str lr, [r8, #0] @ Save calling PC
mrs r6, spsr
str r6, [r8, #4] @ Save CPSR
str r0, [r8, #8] @ Save OLD_R0
mov r0, sp
bl rt_hw_trap_dabt
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} /* Calling r0-r12 */
add r8, sp, #S_PC
stmdb r8, {sp, lr}^ /* Calling SP, LR */
str lr, [r8, #0] /* Save calling PC */
mrs r6, spsr
str r6, [r8, #4] /* Save CPSR */
str r0, [r8, #8] /* Save OLD_R0 */
mov r0, sp
bl rt_hw_trap_dabt
.align 5
vector_resv:
bl rt_hw_trap_resv
bl rt_hw_trap_resv
.globl rt_interrupt_enter
.globl rt_interrupt_leave
.globl rt_thread_switch_interrput_flag
.globl rt_interrupt_from_thread
.globl rt_interrupt_to_thread
.globl rt_interrupt_enter
.globl rt_interrupt_leave
.globl rt_thread_switch_interrput_flag
.globl rt_interrupt_from_thread
.globl rt_interrupt_to_thread
vector_irq:
stmfd sp!, {r0-r12,lr}
bl rt_interrupt_enter
bl rt_hw_trap_irq
bl rt_interrupt_leave
bl rt_interrupt_enter
bl rt_hw_trap_irq
bl rt_interrupt_leave
/* if rt_thread_switch_interrput_flag set, jump to _interrupt_thread_switch and don't return */
ldr r0, =rt_thread_switch_interrput_flag
ldr r1, [r0]
cmp r1, #1
beq _interrupt_thread_switch
ldr r0, =rt_thread_switch_interrput_flag
ldr r1, [r0]
cmp r1, #1
beq _interrupt_thread_switch
ldmfd sp!, {r0-r12,lr}
subs pc, lr, #4
......@@ -273,79 +312,79 @@ vector_irq:
.align 5
vector_fiq:
stmfd sp!,{r0-r7,lr}
bl rt_hw_trap_fiq
bl rt_hw_trap_fiq
ldmfd sp!,{r0-r7,lr}
subs pc,lr,#4
_interrupt_thread_switch:
mov r1, #0 @ clear rt_thread_switch_interrput_flag
str r1, [r0]
ldmfd sp!, {r0-r12,lr}@ reload saved registers
stmfd sp!, {r0-r3} @ save r0-r3
mov r1, sp
add sp, sp, #16 @ restore sp
sub r2, lr, #4 @ save old task's pc to r2
mrs r3, spsr @ disable interrupt
orr r0, r3, #NOINT
msr spsr_c, r0
ldr r0, =.+8 @ switch to interrupted task's stack
mov r1, #0 /* clear rt_thread_switch_interrput_flag*/
str r1, [r0]
ldmfd sp!, {r0-r12,lr} /* reload saved registers */
stmfd sp!, {r0-r3} /* save r0-r3 */
mov r1, sp
add sp, sp, #16 /* restore sp */
sub r2, lr, #4 /* save old task's pc to r2 */
mrs r3, spsr /* disable interrupt */
orr r0, r3, #NOINT
msr spsr_c, r0
ldr r0, =.+8 /* switch to interrupted task's stack*/
movs pc, r0
stmfd sp!, {r2} @ push old task's pc
stmfd sp!, {r4-r12,lr}@ push old task's lr,r12-r4
mov r4, r1 @ Special optimised code below
mov r5, r3
stmfd sp!, {r2} /* push old task's pc */
stmfd sp!, {r4-r12,lr} /* push old task's lr,r12-r4 */
mov r4, r1 /* Special optimised code below */
mov r5, r3
ldmfd r4!, {r0-r3}
stmfd sp!, {r0-r3} @ push old task's r3-r0
stmfd sp!, {r5} @ push old task's psr
mrs r4, spsr
stmfd sp!, {r4} @ push old task's spsr
stmfd sp!, {r0-r3} /* push old task's r3-r0 */
stmfd sp!, {r5} /* push old task's psr */
mrs r4, spsr
stmfd sp!, {r4} /* push old task's spsr */
ldr r4, =rt_interrupt_from_thread
ldr r5, [r4]
str sp, [r5] @ store sp in preempted tasks's TCB
ldr r4, =rt_interrupt_from_thread
ldr r5, [r4]
str sp, [r5] /* store sp in preempted tasks's TCB*/
ldr r6, =rt_interrupt_to_thread
ldr r6, [r6]
ldr sp, [r6] @ get new task's stack pointer
ldr sp, [r6] /* get new task's stack pointer */
ldmfd sp!, {r4} @ pop new task's spsr
msr SPSR_cxsf, r4
ldmfd sp!, {r4} @ pop new task's psr
msr CPSR_cxsf, r4
ldmfd sp!, {r4} /* pop new task's spsr */
msr SPSR_cxsf, r4
ldmfd sp!, {r4} /* pop new task's psr */
msr CPSR_cxsf, r4
ldmfd sp!, {r0-r12,lr,pc} @ pop new task's r0-r12,lr & pc
ldmfd sp!, {r0-r12,lr,pc} /* pop new task's r0-r12,lr & pc */
stack_setup:
mrs r0, cpsr
bic r0, r0, #MODEMASK
orr r1, r0, #UNDEFMODE|NOINT
msr cpsr_cxsf, r1 @ undef mode
ldr sp, UNDEFINED_STACK_START
mrs r0, cpsr
bic r0, r0, #MODEMASK
orr r1, r0, #UNDEFMODE|NOINT
msr cpsr_cxsf, r1 /* undef mode */
ldr sp, UNDEFINED_STACK_START
orr r1,r0,#ABORTMODE|NOINT
msr cpsr_cxsf,r1 @ abort mode
ldr sp, ABORT_STACK_START
orr r1,r0,#ABORTMODE|NOINT
msr cpsr_cxsf,r1 /* abort mode */
ldr sp, ABORT_STACK_START
orr r1,r0,#IRQMODE|NOINT
msr cpsr_cxsf,r1 @ IRQ mode
ldr sp, IRQ_STACK_START
orr r1,r0,#IRQMODE|NOINT
msr cpsr_cxsf,r1 /* IRQ mode */
ldr sp, IRQ_STACK_START
orr r1,r0,#FIQMODE|NOINT
msr cpsr_cxsf,r1 @ FIQ mode
ldr sp, FIQ_STACK_START
orr r1,r0,#FIQMODE|NOINT
msr cpsr_cxsf,r1 /* FIQ mode */
ldr sp, FIQ_STACK_START
bic r0,r0,#MODEMASK
orr r1,r0,#SVCMODE|NOINT
msr cpsr_cxsf,r1 @ SVC mode
bic r0,r0,#MODEMASK
orr r1,r0,#SVCMODE|NOINT
msr cpsr_cxsf,r1 /* SVC mode */
ldr sp, _STACK_START
ldr sp, _STACK_START
/* USER mode is not initialized. */
mov pc,lr @ The LR register may be not valid for the mode changes.
mov pc,lr /* The LR register may be not valid for the mode changes.*/
/*@}*/
/*/*}*/
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或