Skip to content

R
rt-thread

天中雨水 / rt-thread
该项目与 Fork 源项目分叉

Fork自 RT-Thread / rt-thread

通知 2
Star 1
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 169c31fc 编写于 作者: O onelife.real
浏览文件
操作

*** EFM32 branch *** 

1. Add EFM32 development kit support
2. Add USART sync mode (SPI) support
3. Add SPI Flash device (ST M25PX16) driver and demo application

git-svn-id: https://rt-thread.googlecode.com/svn/trunk@1401 bbd45198-f89e-11dd-88c7-29a3b14d5316
上级 43a6a907
隐藏空白更改
内联 并排
Showing with 2082 addition and 183 deletion
bsp/efm32/EFM32_Gxxx_DK/dvk.c 0 → 100644
浏览文件 @ 169c31fc
/**************************************************************************//**
* @file
* @brief DVK board support package, initialization
* @author Energy Micro AS
* @version 1.6.0
******************************************************************************
* @section License
* <b>(C) Copyright 2010 Energy Micro AS, http://www.energymicro.com</b>
******************************************************************************
*
* This source code is the property of Energy Micro AS. The source and compiled
* code may only be used on Energy Micro "EFM32" microcontrollers.
*
* This copyright notice may not be removed from the source code nor changed.
*
* DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Energy Micro AS has no
* obligation to support this Software. Energy Micro AS is providing the
* Software "AS IS", with no express or implied warranties of any kind,
* including, but not limited to, any implied warranties of merchantability
* or fitness for any particular purpose or warranties against infringement
* of any proprietary rights of a third party.
*
* Energy Micro AS will not be liable for any consequential, incidental, or
* special damages, or any other relief, or for any claim by any third party,
* arising from your use of this Software.
*
*****************************************************************************/
#include "efm32.h"
#include "dvk.h"
/**************************************************************************//**
* @brief Initializes DVK, configures board control access
*****************************************************************************/
void DVK_init(void)
{
#ifdef DVK_EBI_CONTROL
DVK_EBI_init();
#endif
#ifdef DVK_SPI_CONTROL
DVK_SPI_init();
#endif
/* Inform AEM application that we are in Energy Mode 0 by default */
DVK_setEnergyMode(0);
}
/**************************************************************************//**
* @brief Disables DVK, free up resources
*****************************************************************************/
void DVK_disable(void)
{
#ifdef DVK_EBI_CONTROL
/* Handover bus control */
DVK_disableBus();
/* Disable EBI interface */
DVK_EBI_disable();
#endif
#ifdef DVK_SPI_CONTROL
DVK_SPI_disable();
#endif
}
bsp/efm32/EFM32_Gxxx_DK/dvk.h 0 → 100644
浏览文件 @ 169c31fc
/**************************************************************************//**
* @file
* @brief DVK Board Support, master header file
* @author Energy Micro AS
* @version 1.6.0
******************************************************************************
* @section License
* <b>(C) Copyright 2010 Energy Micro AS, http://www.energymicro.com</b>
******************************************************************************
*
* This source code is the property of Energy Micro AS. The source and compiled
* code may only be used on Energy Micro "EFM32" microcontrollers.
*
* This copyright notice may not be removed from the source code nor changed.
*
* DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Energy Micro AS has no
* obligation to support this Software. Energy Micro AS is providing the
* Software "AS IS", with no express or implied warranties of any kind,
* including, but not limited to, any implied warranties of merchantability
* or fitness for any particular purpose or warranties against infringement
* of any proprietary rights of a third party.
*
* Energy Micro AS will not be liable for any consequential, incidental, or
* special damages, or any other relief, or for any claim by any third party,
* arising from your use of this Software.
*
*****************************************************************************/
#ifndef __DVK_H
#define __DVK_H
#include <stdint.h>
#include "dvk_boardcontrol.h"
#include "dvk_bcregisters.h"
/* onelife: Add missing define */
#define NULL ((void *)0)
/* IF not user overrides default, try to decide DVK access interface based on
* part number */
#ifndef DVK_SPI_CONTROL
#ifndef DVK_EBI_CONTROL
#if defined(EFM32G200F16)
#define DVK_SPI_CONTROL
#elif defined(EFM32G200F32)
#define DVK_SPI_CONTROL
#elif defined(EFM32G200F64)
#define DVK_SPI_CONTROL
#elif defined(EFM32G210F128)
#define DVK_SPI_CONTROL
#elif defined(EFM32G230F128)
#define DVK_SPI_CONTROL
#elif defined(EFM32G230F32)
#define DVK_SPI_CONTROL
#elif defined(EFM32G230F64)
#define DVK_SPI_CONTROL
#elif defined(EFM32G280F128)
#define DVK_EBI_CONTROL
#elif defined(EFM32G280F32)
#define DVK_EBI_CONTROL
#elif defined(EFM32G280F64)
#define DVK_EBI_CONTROL
#elif defined(EFM32G290F128)
#define DVK_EBI_CONTROL
#elif defined(EFM32G290F32)
#define DVK_EBI_CONTROL
#elif defined(EFM32G290F64)
#define DVK_EBI_CONTROL
#elif defined(EFM32G840F128)
#define DVK_SPI_CONTROL
#elif defined(EFM32G840F32)
#define DVK_SPI_CONTROL
#elif defined(EFM32G840F64)
#define DVK_SPI_CONTROL
#elif defined(EFM32G880F128)
#define DVK_SPI_CONTROL
#elif defined(EFM32G880F32)
#define DVK_SPI_CONTROL
#elif defined(EFM32G880F64)
#define DVK_SPI_CONTROL
#elif defined(EFM32G890F128)
#define DVK_SPI_CONTROL
#elif defined(EFM32G890F32)
#define DVK_SPI_CONTROL
#elif defined(EFM32G890F64)
#define DVK_SPI_CONTROL
#else
#define DVK_SPI_CONTROL
#endif
#endif
#endif
/* EBI access */
void DVK_EBI_init(void);
void DVK_EBI_disable(void);
void DVK_EBI_writeRegister(volatile uint16_t *addr, uint16_t data);
uint16_t DVK_EBI_readRegister(volatile uint16_t *addr);
/* SPI access */
void DVK_SPI_init(void);
void DVK_SPI_disable(void);
void DVK_SPI_writeRegister(volatile uint16_t *addr, uint16_t data);
uint16_t DVK_SPI_readRegister(volatile uint16_t *addr);
/* Accodring to configuration, use either SPI or EBI */
#ifdef DVK_EBI_CONTROL
#define DVK_writeRegister(A, B) DVK_EBI_writeRegister(A, B)
#define DVK_readRegister(A) DVK_EBI_readRegister(A)
#endif
#ifdef DVK_SPI_CONTROL
#define DVK_writeRegister(A, B) DVK_SPI_writeRegister(A, B)
#define DVK_readRegister(A) DVK_SPI_readRegister(A)
#endif
/* General initialization routines */
void DVK_init(void);
void DVK_disable(void);
#endif
bsp/efm32/EFM32_Gxxx_DK/dvk_bcregisters.h 0 → 100644
浏览文件 @ 169c31fc
/**************************************************************************//**
* @file
* @brief Board Control register definitions
* @author Energy Micro AS
* @version 1.6.0
******************************************************************************
* @section License
* <b>(C) Copyright 2010 Energy Micro AS, http://www.energymicro.com</b>
******************************************************************************
*
* This source code is the property of Energy Micro AS. The source and compiled
* code may only be used on Energy Micro "EFM32" microcontrollers.
*
* This copyright notice may not be removed from the source code nor changed.
*
* DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Energy Micro AS has no
* obligation to support this Software. Energy Micro AS is providing the
* Software "AS IS", with no express or implied warranties of any kind,
* including, but not limited to, any implied warranties of merchantability
* or fitness for any particular purpose or warranties against infringement
* of any proprietary rights of a third party.
*
* Energy Micro AS will not be liable for any consequential, incidental, or
* special damages, or any other relief, or for any claim by any third party,
* arising from your use of this Software.
*
*****************************************************************************/
#ifndef __DVK_BCREGISTERS_H
#define __DVK_BCREGISTERS_H
#include <stdint.h>
/**************************************************************************//**
* Defines FPGA register bank for Energy Micro Development Kit (DVK) board,
* i.e. board control registers
*****************************************************************************/
#define BC_FLASH_BASE 0x80000000 /**< FLASH memory base address */
#define BC_SRAM_BASE 0x84000000 /**< SRAM base address */
#define BC_SSD2119_BASE 0x88000000 /**< TFT Controller base address */
#define BC_REGISTER_BASE 0x8c000000 /**< Board Controller registers base address */
#define BC_CFG ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x00)) /**< CFG */
#define BC_EM ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x01)) /**< EM */
#define BC_MAGIC ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x02)) /**< MAGIC */
#define BC_LED ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x03)) /**< LEDs */
#define BC_PUSHBUTTON ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x04)) /**< Push Buttons */
#define BC_DIPSWITCH ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x05)) /**< Dip switches */
#define BC_JOYSTICK ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x06)) /**< Joystick */
#define BC_AEM ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x07)) /**< AEM push button status */
#define BC_DISPLAY_CTRL ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x08)) /**< Display Control */
#define BC_EBI_CFG ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x09)) /**< EBI config */
#define BC_BUS_CFG ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x0a)) /**< BUS config */
#define BC_PERCTRL ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x0c)) /**< Peripheral Control */
#define BC_AEMSTATE ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x0d)) /**< AEM state of push button switch */
#define BC_SPI_CFG ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x0e)) /**< SPI config */
#define BC_RESET ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x0f)) /**< Reset */
#define BC_ADC_START ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x10)) /**< ADC start */
#define BC_ADC_STATUS ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x11)) /**< ADC status */
#define BC_ADC_DATA ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x12)) /**< ADC data */
#define BC_HW_VERSION ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x14)) /**< HW version */
#define BC_FW_BUILDNO ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x15)) /**< FW build number */
#define BC_FW_VERSION ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x16)) /**< FW version */
#define BC_SCRATCH_COMMON ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x17)) /**< Scratch common */
#define BC_SCRATCH_EFM0 ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x18)) /**< Scratch EFM0 */
#define BC_SCRATCH_EFM1 ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x19)) /**< Scratch EFM1 */
#define BC_SCRATCH_EFM2 ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x1A)) /**< Scratch EFM2 */
#define BC_SCRATCH_EFM3 ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x1B)) /**< Scratch EFM3 */
#define BC_SCRATCH_BC0 ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x1C)) /**< Scratch BC0 */
#define BC_SCRATCH_BC1 ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x1D)) /**< Scratch BC1 */
#define BC_SCRATCH_BC2 ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x1E)) /**< Scratch BC2 */
#define BC_SCRATCH_BC3 ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x1f)) /**< Scratch BC3 */
#define BC_INTFLAG ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x20)) /**< Interrupt flag */
#define BC_INTEN ((volatile uint16_t *)(BC_REGISTER_BASE + sizeof(uint16_t) * 0x21)) /**< Interrupt enable */
/**************************************************************************//**
* Defines bit fields for board control registers
*****************************************************************************/
#define BC_CFG_SPI (0) /**< SPI mode */
#define BC_CFG_EBI (1) /**< EBI mode */
#define BC_EM_EM0 (0) /**< Indicate EM0 */
#define BC_EM_EM1 (1) /**< Indicate EM1 */
#define BC_EM_EM2 (2) /**< Indicate EM2 */
#define BC_EM_EM3 (3) /**< Indicate EM3 */
#define BC_EM_EM4 (4) /**< Indicate EM4 */
#define BC_MAGIC_VALUE (0xef32) /**< Magic */
#define BC_PUSHBUTTON_MASK (0x000f) /**< Push button mask */
#define BC_PUSHBUTTON_SW1 (1 << 0) /**< Push button SW1 */
#define BC_PUSHBUTTON_SW2 (1 << 1) /**< Push button SW2 */
#define BC_PUSHBUTTON_SW3 (1 << 2) /**< Push button SW3 */
#define BC_PUSHBUTTON_SW4 (1 << 3) /**< Push button SW4 */
#define BC_DIPSWITCH_MASK (0x00ff) /**< Dip switch mask */
#define BC_JOYSTICK_MASK (0x001f) /**< Joystick mask */
#define BC_JOYSTICK_DOWN (1 << 0) /**< Joystick down */
#define BC_JOYSTICK_RIGHT (1 << 1) /**< Joystick right */
#define BC_JOYSTICK_UP (1 << 2) /**< Joystick up */
#define BC_JOYSTICK_LEFT (1 << 3) /**< Joystick left */
#define BC_JOYSTICK_CENTER (1 << 4) /**< Joystick center button */
#define BC_DISPCTRL_RESET (1 << 0) /**< Reset */
#define BC_DISPCTRL_POWER_ENABLE (1 << 1) /**< Display Control Power Enable */
#define BC_EBI_CFG_MASK (0x0003) /**< EBI Config */
#define BC_EBI_CFG_16X16 (0) /**< 16x16 address/data mode */
#define BC_EBI_CFG_8X8 (1) /**< 8x8 address/data mode */
#define BC_EBI_CFG_24X8 (2) /**< 24x8 address/data mode */
#define BC_BUS_CFG_MASK (0x0003) /**< Bus config */
#define BC_BUS_CFG_FSMC (0) /**< Kit Board Controller owns bus */
#define BC_BUS_CFG_EBI (1) /**< EBI drives bus */
#define BC_BUS_CFG_SPI (2) /**< SPI drives bus */
#define BC_PERCTRL_ACCEL (1 << 0) /**< Accelerometer enable */
#define BC_PERCTRL_AMBIENT (1 << 1) /**< Ambient light sensor enable */
#define BC_PERCTRL_POTMETER (1 << 2) /**< Potentiometer enable */
#define BC_PERCTRL_RS232A (1 << 3) /**< RS232A enable */
#define BC_PERCTRL_RS232B (1 << 4) /**< RS232B enable */
#define BC_PERCTRL_SPI (1 << 5) /**< SPI enable */
#define BC_PERCTRL_I2C (1 << 6) /**< I2C enable */
#define BC_PERCTRL_IRDA (1 << 7) /**< IRDA enable */
#define BC_PERCTRL_ANALOG_SE (1 << 8) /**< Analog SE enable */
#define BC_PERCTRL_ANALOG_DIFF (1 << 9) /**< Analog Diff enable */
#define BC_PERCTRL_AUDIO_OUT (1 << 10) /**< Audio Out enable */
#define BC_PERCTRL_AUDIO_IN (1 << 11) /**< Audio In enable */
#define BC_PERCTRL_ACCEL_GSEL (1 << 12) /**< Accel Gsel enable */
#define BC_PERCTRL_ACCEL_SELFTEST (1 << 13) /**< Accel Self test enable */
#define BC_PERCTRL_RS232_SHUTDOWN (1 << 14) /**< RS232 shutdown */
#define BC_PERCTRL_IRDA_SHUTDOWN (1 << 15) /**< IRDA shutdown */
#define BC_AEMSTATE_BC (0) /**< AEM button state, BC controls buttons */
#define BC_AEMSTATE_EFM (1) /**< AEM button state, EFM32 controls buttons */
#define BC_SPI_CFG_FLASH (0) /**< SPI Flash config */
#define BC_SPI_CFG_MICROSD (1) /**< SPI MicroSD config */
#define BC_RESET_FLASH (1 << 0) /**< Reset Flash */
#define BC_RESET_EFM (1 << 1) /**< Reset EFM */
#define BC_ADC_START_MASK (0x00ff) /**< ADC Start mask */
#define BC_ADC_STATUS_DONE (0) /**< ADC Status Done */
#define BC_ADC_STATUS_BUSY (1) /**< ADC Status Busy */
#define BC_HW_VERSION_PCB_MASK (0x07f0) /**< PCB Version mask */
#define BC_HW_VERSION_PCB_SHIFT (4) /**< PCB Version shift */
#define BC_HW_VERSION_BOARD_MASK (0x000f) /**< Board version mask */
#define BC_HW_VERSION_BOARD_SHIFT (0) /**< Board version shift */
#define BC_HW_FW_VERSION_MAJOR_MASK (0xf000) /**< FW Version major mask */
#define BC_HW_FW_VERSION_MAJOR_SHIFT (12) /**< FW version major shift */
#define BC_HW_FW_VERSION_MINOR_MASK (0x0f00) /**< FW version minor mask */
#define BC_HW_FW_VERSION_MINOR_SHIFT (8) /**< FW version minor shift */
#define BC_HW_FW_VERSION_PATCHLEVEL_MASK (0x00ff) /**< FW Patchlevel mask */
#define BC_HW_FW_VERSION_PATCHLEVEL_SHIFT (0) /**< FW Patchlevel shift */
#define BC_INTEN_MASK (0x000f) /**< Interrupt enable mask */
#define BC_INTEN_PB (1 << 0) /**< Push Button Interrupt enable */
#define BC_INTEN_DIP (1 << 1) /**< DIP Switch Interrupt enable */
#define BC_INTEN_JOYSTICK (1 << 2) /**< Joystick Interrupt enable */
#define BC_INTEN_AEM (1 << 3) /**< AEM Interrupt enable */
#define BC_INTFLAG_MASK (0x000f) /**< Interrupt flag mask */
#define BC_INTFLAG_PB (1 << 0) /**< Push Button interrupt triggered */
#define BC_INTFLAG_DIP (1 << 1) /**< DIP interrupt triggered */
#define BC_INTFLAG_JOYSTICK (1 << 2) /**< Joystick interrupt triggered */
#define BC_INTFLAG_AEM (1 << 3) /**< AEM interrupt triggered */
#endif
bsp/efm32/EFM32_Gxxx_DK/dvk_boardcontrol.c 0 → 100644
浏览文件 @ 169c31fc
/**************************************************************************//**
* @file
* @brief DVK Peripheral Board Control API implementation
* @author Energy Micro AS
* @version 1.6.0
******************************************************************************
* @section License
* <b>(C) Copyright 2010 Energy Micro AS, http://www.energymicro.com</b>
******************************************************************************
*
* This source code is the property of Energy Micro AS. The source and compiled
* code may only be used on Energy Micro "EFM32" microcontrollers.
*
* This copyright notice may not be removed from the source code nor changed.
*
* DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Energy Micro AS has no
* obligation to support this Software. Energy Micro AS is providing the
* Software "AS IS", with no express or implied warranties of any kind,
* including, but not limited to, any implied warranties of merchantability
* or fitness for any particular purpose or warranties against infringement
* of any proprietary rights of a third party.
*
* Energy Micro AS will not be liable for any consequential, incidental, or
* special damages, or any other relief, or for any claim by any third party,
* arising from your use of this Software.
*
*****************************************************************************/
#include "efm32.h"
#include "dvk.h"
#include "dvk_boardcontrol.h"
#include "dvk_bcregisters.h"
/**************************************************************************//**
* @brief Enable EFM32 access to periheral on DVK board
* @param peri Peripheral to enable
*****************************************************************************/
void DVK_enablePeripheral(DVKPeripheral peri)
{
uint16_t bit;
uint16_t tmp;
/* Calculate which bit to set */
bit = (uint16_t) peri;
/* Read peripheral control register */
tmp = DVK_readRegister(BC_PERCTRL);
/* Enable peripheral */
tmp |= bit;
/* Special case for RS232, if enabled disable shutdown */
if ((peri == DVK_RS232A) || (peri == DVK_RS232B))
{
/* clear shutdown bit */
tmp &= ~(BC_PERCTRL_RS232_SHUTDOWN);
}
/* Special case for IRDA if enabled disable shutdown */
if (peri == DVK_IRDA)
{
/* clear shutdown bit */
tmp &= ~(BC_PERCTRL_IRDA_SHUTDOWN);
}
DVK_writeRegister(BC_PERCTRL, tmp);
}
/**************************************************************************//**
* @brief Disable EFM32 access to peripheral on DVK board
* @param peri Peripheral to disable
*****************************************************************************/
void DVK_disablePeripheral(DVKPeripheral peri)
{
uint16_t bit;
uint16_t tmp;
/* Calculate which bit to set */
bit = (uint16_t) peri;
/* Read peripheral control register */
tmp = DVK_readRegister(BC_PERCTRL);
/* Disable peripheral */
tmp &= ~(bit);
/* Special case for RS232, if enabled disable shutdown */
if ((peri == DVK_RS232A) || (peri == DVK_RS232B))
{
/* Set shutdown bit */
tmp |= (BC_PERCTRL_RS232_SHUTDOWN);
}
/* Special case for IRDA */
if (peri == DVK_IRDA)
{
/* Set shutdown bit */
tmp |= (BC_PERCTRL_IRDA_SHUTDOWN);
}
DVK_writeRegister(BC_PERCTRL, tmp);
}
/**************************************************************************//**
* @brief Enable BUS access
*****************************************************************************/
void DVK_enableBus(void)
{
/* Enable bus access */
DVK_writeRegister(BC_BUS_CFG, 1);
}
/**************************************************************************//**
* @brief Disable BUS access
*****************************************************************************/
void DVK_disableBus(void)
{
DVK_writeRegister(BC_BUS_CFG, 0);
}
/**************************************************************************//**
* @brief Inform AEM about current energy mode
* @param energyMode What energy mode we are going to use next
*****************************************************************************/
void DVK_setEnergyMode(uint16_t energyMode)
{
DVK_writeRegister(BC_EM, energyMode);
}
/**************************************************************************//**
* @brief Get status of bush buttons
* @return Status of push buttons
*****************************************************************************/
uint16_t DVK_getPushButtons(void)
{
uint16_t pb = 0;
uint16_t aemState;
/* Check state */
aemState = DVK_readRegister(BC_AEMSTATE);
/* Read pushbutton status */
if ( aemState == BC_AEMSTATE_EFM )
{
pb = (~(DVK_readRegister(BC_PUSHBUTTON))) & 0x000f;
}
return pb;
}
/**************************************************************************//**
* @brief Get joystick button status
* @return Joystick controller status
*****************************************************************************/
uint16_t DVK_getJoystick(void)
{
uint16_t joyStick = 0;
uint16_t aemState;
/* Check state */
aemState = DVK_readRegister(BC_AEMSTATE);
/* Read pushbutton status */
if ( aemState == BC_AEMSTATE_EFM )
{
joyStick = (~(DVK_readRegister(BC_JOYSTICK))) & 0x001f;
}
return joyStick;
}
/**************************************************************************//**
* @brief Get dipswitch status
* The DIP switches are free for user programmable purposes
* @return Joystick controller status
*****************************************************************************/
uint16_t DVK_getDipSwitch(void)
{
uint16_t tmp;
tmp = (~(DVK_readRegister(BC_DIPSWITCH))) & 0x00ff;
return tmp;
}
/**************************************************************************//**
* @brief Sets user leds
* @param leds 16-bits which enables or disables the board "User leds"
*****************************************************************************/
void DVK_setLEDs(uint16_t leds)
{
DVK_writeRegister(BC_LED, leds);
}
/**************************************************************************//**
* @brief Get status of user LEDs
* @return Status of 16 user leds, bit 1 = on, bit 0 = off
*****************************************************************************/
uint16_t DVK_getLEDs(void)
{
return DVK_readRegister(BC_LED);
}
/**************************************************************************//**
* @brief Enable "Control" buttons/joystick/dip switch interrupts
* @param flags Board control interrupt flags, BC_INTEN_<something>
*****************************************************************************/
void DVK_enableInterrupt(uint16_t flags)
{
uint16_t tmp;
/* Add flags to interrupt enable register */
tmp = DVK_readRegister(BC_INTEN);
tmp |= flags;
DVK_writeRegister(BC_INTEN, tmp);
}
/**************************************************************************//**
* @brief Disable "Control" buttons/joystick/dip switch interrupts
* @param flags Board control interrupt flags, BC_INTEN_<something>
*****************************************************************************/
void DVK_disableInterrupt(uint16_t flags)
{
uint16_t tmp;
/* Clear flags from interrupt enable register */
tmp = DVK_readRegister(BC_INTEN);
flags = ~(flags);
tmp &= flags;
DVK_writeRegister(BC_INTEN, tmp);
}
/**************************************************************************//**
* @brief Clear interrupts
* @param flags Board control interrupt flags, BC_INTEN_<something>
*****************************************************************************/
void DVK_clearInterruptFlags(uint16_t flags)
{
DVK_writeRegister(BC_INTFLAG, flags);
}
/**************************************************************************//**
* @brief Read interrupt flags
* @return Returns currently triggered interrupts
*****************************************************************************/
uint16_t DVK_getInterruptFlags(void)
{
return DVK_readRegister(BC_INTFLAG);
}
bsp/efm32/EFM32_Gxxx_DK/dvk_boardcontrol.h 0 → 100644
浏览文件 @ 169c31fc
/**************************************************************************//**
* @file
* @brief DVK Peripheral Board Control, prototypes and definitions
* @author Energy Micro AS
* @version 1.6.0
******************************************************************************
* @section License
* <b>(C) Copyright 2010 Energy Micro AS, http://www.energymicro.com</b>
******************************************************************************
*
* This source code is the property of Energy Micro AS. The source and compiled
* code may only be used on Energy Micro "EFM32" microcontrollers.
*
* This copyright notice may not be removed from the source code nor changed.
*
* DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Energy Micro AS has no
* obligation to support this Software. Energy Micro AS is providing the
* Software "AS IS", with no express or implied warranties of any kind,
* including, but not limited to, any implied warranties of merchantability
* or fitness for any particular purpose or warranties against infringement
* of any proprietary rights of a third party.
*
* Energy Micro AS will not be liable for any consequential, incidental, or
* special damages, or any other relief, or for any claim by any third party,
* arising from your use of this Software.
*
*****************************************************************************/
#ifndef __DVK_BOARDCONTROL_H
#define __DVK_BOARDCONTROL_H
#include <stdint.h>
#include "dvk_bcregisters.h"
/** Periperhal access switches */
typedef enum
{
DVK_ACCEL = BC_PERCTRL_ACCEL,
DVK_AMBIENT = BC_PERCTRL_AMBIENT,
DVK_POTMETER = BC_PERCTRL_POTMETER,
DVK_RS232A = BC_PERCTRL_RS232A,
DVK_RS232B = BC_PERCTRL_RS232B,
DVK_SPI = BC_PERCTRL_SPI,
DVK_I2C = BC_PERCTRL_I2C,
DVK_IRDA = BC_PERCTRL_IRDA,
DVK_ANALOG_SE = BC_PERCTRL_ANALOG_SE,
DVK_ANALOG_DIFF = BC_PERCTRL_ANALOG_DIFF,
DVK_AUDIO_OUT = BC_PERCTRL_AUDIO_OUT,
DVK_AUDIO_IN = BC_PERCTRL_AUDIO_IN,
DVK_ACCEL_GSEL = BC_PERCTRL_ACCEL_GSEL,
DVK_ACCEL_SELFTEST = BC_PERCTRL_ACCEL_SELFTEST,
DVK_RS232_SHUTDOWN = BC_PERCTRL_RS232_SHUTDOWN,
DVK_IRDA_SHUTDOWN = BC_PERCTRL_IRDA_SHUTDOWN
} DVKPeripheral;
/* Peripheral Control */
void DVK_enablePeripheral(DVKPeripheral peri);
void DVK_disablePeripheral(DVKPeripheral peri);
void DVK_enableBus(void);
void DVK_disableBus(void);
/* Read board controllers */
uint16_t DVK_getPushButtons(void);
uint16_t DVK_getJoystick(void);
uint16_t DVK_getDipSwitch(void);
/* Report AEM status */
void DVK_setEnergyMode(uint16_t energyMode);
/* User LEDs */
void DVK_setLEDs(uint16_t leds);
uint16_t DVK_getLEDs(void);
/* Interrupt callback */
void DVK_enableInterrupt(uint16_t flags);
void DVK_disableInterrupt(uint16_t flags);
uint16_t DVK_getInterruptFlags(void);
void DVK_clearInterruptFlags(uint16_t flags);
#endif
bsp/efm32/EFM32_Gxxx_DK/dvk_ebi.c 0 → 100644
浏览文件 @ 169c31fc
/**************************************************************************//**
* @file
* @brief EBI implementation of Board Control interface
* This implementation works for devices w/o LCD display on the
* MCU module, specifically the EFM32_G2xx_DK development board
* @author Energy Micro AS
* @version 1.6.0
******************************************************************************
* @section License
* <b>(C) Copyright 2010 Energy Micro AS, http://www.energymicro.com</b>
******************************************************************************
*
* This source code is the property of Energy Micro AS. The source and compiled
* code may only be used on Energy Micro "EFM32" microcontrollers.
*
* This copyright notice may not be removed from the source code nor changed.
*
* DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Energy Micro AS has no
* obligation to support this Software. Energy Micro AS is providing the
* Software "AS IS", with no express or implied warranties of any kind,
* including, but not limited to, any implied warranties of merchantability
* or fitness for any particular purpose or warranties against infringement
* of any proprietary rights of a third party.
*
* Energy Micro AS will not be liable for any consequential, incidental, or
* special damages, or any other relief, or for any claim by any third party,
* arising from your use of this Software.
*
*****************************************************************************/
#include "efm32.h"
#include "efm32_ebi.h"
#include "efm32_cmu.h"
#include "efm32_gpio.h"
#include "dvk.h"
#include "dvk_bcregisters.h"
/**************************************************************************//**
* @brief Configure EBI (external bus interface) for Board Control register
* access
*****************************************************************************/
void DVK_EBI_configure(void)
{
EBI_Init_TypeDef ebiConfig = EBI_INIT_DEFAULT;
/* Run time check if we have EBI on-chip capability on this device */
switch ((DEVINFO->PART & _DEVINFO_PART_DEVICE_NUMBER_MASK) >>
_DEVINFO_PART_DEVICE_NUMBER_SHIFT)
{
/* Only device types EFM32G 280/290/880 and 890 have EBI capability */
case 280:
case 290:
case 880:
case 890:
break;
default:
/* This device do not have EBI capability - use SPI to interface DVK */
/* With high probability your project has been configured for an */
/* incorrect part number. */
while (1) ;
}
/* Enable clocks */
CMU_ClockEnable(cmuClock_EBI, true);
CMU_ClockEnable(cmuClock_GPIO, true);
/* Configure bus connect PC bit 12 active low */
GPIO_PinModeSet(gpioPortC, 12, gpioModePushPull, 0);
/* Configure GPIO pins as push pull */
/* EBI AD9..15 */
GPIO_PinModeSet(gpioPortA, 0, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortA, 1, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortA, 2, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortA, 3, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortA, 4, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortA, 5, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortA, 6, gpioModePushPull, 0);
/* EBI AD8 */
GPIO_PinModeSet(gpioPortA, 15, gpioModePushPull, 0);
/* EBI CS0-CS3 */
GPIO_PinModeSet(gpioPortD, 9, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortD, 10, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortD, 11, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortD, 12, gpioModePushPull, 0);
/* EBI AD0..7 */
GPIO_PinModeSet(gpioPortE, 8, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortE, 9, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortE, 10, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortE, 11, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortE, 12, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortE, 13, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortE, 14, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortE, 15, gpioModePushPull, 0);
/* EBI ARDY/ALEN/Wen/Ren */
GPIO_PinModeSet(gpioPortF, 2, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortF, 3, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortF, 4, gpioModePushPull, 0);
GPIO_PinModeSet(gpioPortF, 5, gpioModePushPull, 0);
/* Configure EBI controller, changing default values */
ebiConfig.mode = ebiModeD16A16ALE;
/* Enable bank 0 address map 0x80000000, FPGA Flash */
/* Enable bank 1 address map 0x84000000, FPGA SRAM */
/* Enable bank 2 address map 0x88000000, FPGA TFT Display (SSD2119) */
/* Enable bank 3 address map 0x8c000000, FPGA Board Control Registers */
ebiConfig.banks = EBI_BANK0|EBI_BANK1|EBI_BANK2|EBI_BANK3;
ebiConfig.csLines = EBI_CS0|EBI_CS1|EBI_CS2|EBI_CS3;
/* Address Setup and hold time */
ebiConfig.addrHoldCycles = 3;
ebiConfig.addrSetupCycles = 3;
/* Read cycle times */
ebiConfig.readStrobeCycles = 7;
ebiConfig.readHoldCycles = 3;
ebiConfig.readSetupCycles = 3;
/* Write cycle times */
ebiConfig.writeStrobeCycles = 7;
ebiConfig.writeHoldCycles = 3;
ebiConfig.writeSetupCycles = 3;
/* Polarity values are default */
/* Configure EBI */
EBI_Init(&ebiConfig);
}
/**************************************************************************//**
* @brief Initialize EBI
* access
*****************************************************************************/
void DVK_EBI_init(void)
{
uint16_t ebiMagic;
int ctr;
/* Disable all GPIO pins and register */
DVK_EBI_disable();
/* Configure EBI */
DVK_EBI_configure();
/* Verify that EBI access is working, if not kit is in SPI mode and needs to
* be configured for EBI access */
ebiMagic = DVK_EBI_readRegister(BC_MAGIC);
if (ebiMagic != BC_MAGIC_VALUE)
{
/* Disable EBI */
DVK_EBI_disable();
/* Enable SPI interface */
DVK_SPI_init();
/* Set EBI mode - after this SPI access will no longer be available */
DVK_SPI_writeRegister(BC_CFG, BC_CFG_EBI);
/* Disable SPI */
DVK_SPI_disable();
/* Now setup EBI again */
DVK_EBI_configure();
/* Wait until ready */
ctr = 0;
do
{
/* Check if FPGA responds */
ebiMagic = DVK_EBI_readRegister(BC_MAGIC);
ctr++;
DVK_EBI_writeRegister(BC_LED, ctr);
} while (ebiMagic != BC_MAGIC_VALUE);
}
}
/**************************************************************************//**
* @brief Disable EBI interface, free all GPIO pins
*****************************************************************************/
void DVK_EBI_disable(void)
{
/* Disable EBI controller */
EBI_Disable();
/* Disable EBI clock in CMU */
CMU_ClockEnable(cmuClock_EBI, false);
/* Disable EBI _BC_BUS_CONNECT */
GPIO_PinModeSet(gpioPortC, 12, gpioModeDisabled, 0);
/* Configure GPIO pins as disabled */
GPIO_PinModeSet(gpioPortA, 0, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortA, 1, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortA, 2, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortA, 3, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortA, 4, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortA, 5, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortA, 6, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortA, 15, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortD, 9, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortD, 10, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortD, 11, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortD, 12, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortE, 8, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortE, 9, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortE, 10, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortE, 11, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortE, 12, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortE, 13, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortE, 14, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortE, 15, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortF, 2, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortF, 3, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortF, 4, gpioModeDisabled, 0);
GPIO_PinModeSet(gpioPortF, 5, gpioModeDisabled, 0);
}
/**************************************************************************//**
* @brief Write data into 16-bit board control register
* @param addr Address to board control register
* @param data Data to write into register
*****************************************************************************/
void DVK_EBI_writeRegister(volatile uint16_t *addr, uint16_t data)
{
*addr = data;
}
/**************************************************************************//**
* @brief Write data into 16-bit board control register
* @param addr Register to read from
*****************************************************************************/
uint16_t DVK_EBI_readRegister(volatile uint16_t *addr)
{
return *addr;
}
bsp/efm32/EFM32_Gxxx_DK/dvk_spi.c 0 → 100644
浏览文件 @ 169c31fc
/**************************************************************************//**
* @file
* @brief SPI implementation of Board Control interface
* This implementation use the USART2 SPI interface to control board
* control registers. It works
* @author Energy Micro AS
* @version 1.6.0
******************************************************************************
* @section License
* <b>(C) Copyright 2010 Energy Micro AS, http://www.energymicro.com</b>
******************************************************************************
*
* This source code is the property of Energy Micro AS. The source and compiled
* code may only be used on Energy Micro "EFM32" microcontrollers.
*
* This copyright notice may not be removed from the source code nor changed.
*
* DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Energy Micro AS has no
* obligation to support this Software. Energy Micro AS is providing the
* Software "AS IS", with no express or implied warranties of any kind,
* including, but not limited to, any implied warranties of merchantability
* or fitness for any particular purpose or warranties against infringement
* of any proprietary rights of a third party.
*
* Energy Micro AS will not be liable for any consequential, incidental, or
* special damages, or any other relief, or for any claim by any third party,
* arising from your use of this Software.
*
*****************************************************************************/
#include <stdio.h>
#include "efm32.h"
#include "efm32_usart.h"
#include "efm32_gpio.h"
#include "efm32_cmu.h"
#include "dvk.h"
#include "dvk_bcregisters.h"
/* USART used for SPI access */
#define USART_USED USART2
#define USART_CLK cmuClock_USART2
/* GPIO pins used, please refer to DVK user guide. */
#define PIN_SPIBUS_CONNECT 13
#define PORT_SPIBUS_CONNECT gpioPortC
#define PIN_SPI_TX 2
#define PORT_SPI_TX gpioPortC
#define PIN_SPI_RX 3
#define PORT_SPI_RX gpioPortC
#define PIN_SPI_CLK 4
#define PORT_SPI_CLK gpioPortC
#define PIN_SPI_CS 5
#define PORT_SPI_CS gpioPortC
static volatile uint16_t *lastAddr = NULL;
/**************************************************************************//**
* @brief Initializes SPI interface for access to FPGA registers
* for board control
*****************************************************************************/
static void spiInit(void)
{
USART_InitSync_TypeDef init = USART_INITSYNC_DEFAULT;
/* Enable module clocks */
CMU_ClockEnable(cmuClock_GPIO, true);
CMU_ClockEnable(cmuClock_HFPER, true);
CMU_ClockEnable(USART_CLK, true);
/* Configure SPI bus connect pins, DOUT set to 0 */
GPIO_PinModeSet(PORT_SPIBUS_CONNECT, PIN_SPIBUS_CONNECT, gpioModePushPull, 0);
/* Configure SPI pins */
GPIO_PinModeSet(PORT_SPI_TX, PIN_SPI_TX, gpioModePushPull, 0);
GPIO_PinModeSet(PORT_SPI_RX, PIN_SPI_RX, gpioModePushPull, 0);
GPIO_PinModeSet(PORT_SPI_CLK, PIN_SPI_CLK, gpioModePushPull, 0);
/* Keep CS high to not activate slave */
GPIO_PinModeSet(PORT_SPI_CS, PIN_SPI_CS, gpioModePushPull, 1);
/* Enable pins at default location */
USART_USED->ROUTE = USART_ROUTE_TXPEN | USART_ROUTE_RXPEN | USART_ROUTE_CLKPEN;
/* Reset USART just in case */
USART_Reset(USART_USED);
/* Configure to use SPI master with manual CS */
/* For now, configure SPI for worst case 32MHz clock in order to work for all */
/* configurations. */
init.refFreq = 32000000;
init.baudrate = 7000000;
USART_InitSync(USART_USED, &init);
}
/**************************************************************************//**
* @brief Disables GPIO pins and USART from FPGA register access
*****************************************************************************/
static void spiDisable(void)
{
USART_Reset(USART_USED);
/* Route setup must be reset separately */
USART_USED->ROUTE = _USART_ROUTE_RESETVALUE;
/* Disable SPI pins */
GPIO_PinModeSet(PORT_SPIBUS_CONNECT, PIN_SPIBUS_CONNECT, gpioModeDisabled, 0);
GPIO_PinModeSet(PORT_SPI_TX, PIN_SPI_TX, gpioModeDisabled, 0);
GPIO_PinModeSet(PORT_SPI_RX, PIN_SPI_RX, gpioModeDisabled, 0);
GPIO_PinModeSet(PORT_SPI_CLK, PIN_SPI_CLK, gpioModeDisabled, 0);
GPIO_PinModeSet(PORT_SPI_CS, PIN_SPI_CS, gpioModeDisabled, 0);
/* Disable USART clock - we can't disable GPIO or HFPER as we don't know who else
* might be using it */
CMU_ClockEnable(USART_CLK, false);
}
/**************************************************************************//**
* @brief Perform SPI Transfer
*****************************************************************************/
static uint16_t spiAccess(uint8_t spiaddr, uint8_t rw, uint16_t spidata)
{
uint16_t tmp;
GPIO_PinOutClear(PORT_SPI_CS, PIN_SPI_CS);
/* For every byte sent, one is received */
/* Write SPI address */
USART_Tx(USART_USED, (spiaddr & 0x3) | rw << 3);
/* Just ignore data read back */
USART_Rx(USART_USED);
/* SPI data LSB */
USART_Tx(USART_USED, spidata & 0xFF);
tmp = (uint16_t)USART_Rx(USART_USED);
/* SPI data MSB */
USART_Tx(USART_USED, spidata >> 8);
tmp |= (uint16_t)USART_Rx(USART_USED) << 8;
GPIO_PinOutSet(PORT_SPI_CS, PIN_SPI_CS);
return tmp;
}
/**************************************************************************//**
* @brief Performs SPI write to FPGA register
* @param spiadr Address of register
* @param spidata Data to write
*****************************************************************************/
static void spiWrite(uint8_t spiadr, uint16_t spidata)
{
spiAccess(spiadr, 0, spidata);
}
/**************************************************************************//**
* @brief Performs SPI read from FPGA register
* @param spiadr Address of register
* @param spidata Dummy data
*****************************************************************************/
static uint16_t spiRead(uint8_t spiadr, uint16_t spidata)
{
return spiAccess(spiadr, 1, spidata);
}
/**************************************************************************//**
* @brief Initializes DVK register access
*****************************************************************************/
void DVK_SPI_init(void)
{
uint16_t spiMagic;
spiInit();
/* Read "board control Magic" register to verify SPI is up and running */
/* if not FPGA is configured to be in EBI mode */
spiMagic = DVK_SPI_readRegister(BC_MAGIC);
if (spiMagic != BC_MAGIC_VALUE)
{
/* Development Kit is configured to use EBI mode, restart of kit required */
/* to use SPI for configuration */
spiDisable();
while (1) ;
}
}
/**************************************************************************//**
* @brief Disable and free up resources used by SPI board control access
*****************************************************************************/
void DVK_SPI_disable(void)
{
spiDisable();
}
/**************************************************************************//**
* @brief Perform read from DVK board control register
* @param addr Address of register to read from
*****************************************************************************/
uint16_t DVK_SPI_readRegister(volatile uint16_t *addr)
{
uint16_t data;
if (addr != lastAddr)
{
spiWrite(0x00, 0xFFFF & ((uint32_t) addr)); /*LSBs of address*/
spiWrite(0x01, 0xFF & ((uint32_t) addr >> 16)); /*MSBs of address*/
spiWrite(0x02, (0x0C000000 & (uint32_t) addr) >> 26); /*Chip select*/
}
/* Read twice */
data = spiRead(0x03, 0);
data = spiRead(0x03, 0);
lastAddr = addr;
return data;
}
/**************************************************************************//**
* @brief Perform write to DVK board control register
* @param addr Address of register to write to
* @param data 16-bit to write into register
*****************************************************************************/
void DVK_SPI_writeRegister(volatile uint16_t *addr, uint16_t data)
{
if (addr != lastAddr)
{
spiWrite(0x00, 0xFFFF & ((uint32_t) addr)); /*LSBs of address*/
spiWrite(0x01, 0xFF & ((uint32_t) addr >> 16)); /*MSBs of address*/
spiWrite(0x02, (0x0C000000 & (uint32_t) addr) >> 26); /*Chip select*/
}
spiWrite(0x03, data); /*Data*/
lastAddr = addr;
}
bsp/efm32/SConscript
浏览文件 @ 169c31fc
......@@ -2,13 +2,20 @@ import rtconfig
Import('RTT_ROOT')
from building import *
if rtconfig.EFM32_BOARD == 'EFM32_G290_DK':
src_kit = Glob('EFM32_Gxxx_DK/*.c')
CPPPATH = [RTT_ROOT + '/bsp/efm32/EFM32_Gxxx_DK']
else:
src_kit = []
CPPPATH = []
src_bsp = ['application.c', 'startup.c', 'board.c']
src_drv = ['drv_dma.c', 'drv_rtc.c', 'drv_adc.c', 'drv_acmp.c', 'drv_usart.c', 'drv_iic.c', 'drv_timer.c']
src_dev = ['dev_misc.c', 'dev_led.c']
src_dev = ['dev_misc.c', 'dev_led.c', 'dev_sflash.c']
src_hdl = ['hdl_interrupt.c']
src = src_bsp + src_drv + src_dev + src_hdl
CPPPATH = [RTT_ROOT + '/bsp/efm32']
src = src_kit + src_bsp + src_drv + src_dev + src_hdl
CPPPATH.append(RTT_ROOT + '/bsp/efm32')
CPPDEFINES = ['USE_STDPERIPH_DRIVER', rtconfig.EFM32_BOARD, rtconfig.EFM32_TYPE]
group = DefineGroup('Startup', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES = CPPDEFINES)
......
bsp/efm32/application.c
浏览文件 @ 169c31fc
......@@ -13,6 +13,7 @@
* Date Author Notes
* 2009-01-05 Bernard first version
* 2010-12-29 onelife Modify for EFM32
* 2011-05-06 onelife Add SPI Flash DEMO
*********************************************************************/
/******************************************************************//**
......@@ -32,10 +33,9 @@
#include <dfs_fs.h>
#endif
#ifdef RT_USING_LWIP
#include <lwip/sys.h>
#include <lwip/api.h>
#include <netif/ethernetif.h>
#include "dev_led.h"
#ifdef EFM32_USING_SFLASH
#include "dev_sflash.h"
#endif
/* Private typedef -------------------------------------------------------------*/
......@@ -46,28 +46,74 @@ rt_uint32_t rt_system_status = 0;
/* Private function prototypes ---------------------------------------------------*/
/* Private functions ------------------------------------------------------------*/
void rt_demo_thread_entry(void* parameter)
{
#ifdef EFM32_USING_SFLASH
rt_uint8_t i;
rt_uint8_t test[] = "123456789ABCDEF";
rt_uint8_t buf[30], buf2[30];
efm_spiFash_cmd(sflash_inst_rdid_l, EFM32_NO_DATA, buf, sizeof(buf));
rt_kprintf("Manuf ID: %x\n", buf[0]);
rt_kprintf("Memory type: %x\n", buf[1]);
rt_kprintf("Memory capacity: %x\n", buf[2]);
rt_kprintf("CFD length: %x\n", buf[3]);
rt_kprintf("CFD: %x%x%x...%x%x\n", buf[4], buf[5], buf[6], buf[18], buf[19]);
efm_spiFash_cmd(sflash_inst_wren, EFM32_NO_DATA, EFM32_NO_POINTER, EFM32_NO_DATA);
do
{
efm_spiFash_cmd(sflash_inst_rdsr, EFM32_NO_DATA, buf2, sizeof(buf2));
rt_kprintf("Status: %x\n", buf2[0]);
} while (buf2[0] == 0xFF);
rt_kprintf("Status: %x\n", buf2[0]);
//efm_spiFash_cmd(sflash_inst_pp, 0x000003F8, test, sizeof(test) - 1);
efm_spiFash_cmd(sflash_inst_rdsr, EFM32_NO_DATA, buf2, sizeof(buf2));
rt_kprintf("Status: %x\n", buf2[0]);
efm_spiFash_cmd(sflash_inst_read, 0x00000300, buf, sizeof(buf));
rt_kprintf("READ: \n");
for (i = 0; i < sizeof(buf); i++)
{
rt_kprintf("%c\n", buf[i]);
}
//efm_spiFash_deinit();
#endif
}
void rt_led_thread_entry(void* parameter)
{
// rt_uint8_t n = 0;
rt_uint8_t n = 0;
rt_hw_led_on(0);
rt_hw_led_on(1);
rt_hw_led_on(2);
rt_hw_led_on(3);
// while(1)
// {
/* light on leds for one second */
// rt_hw_led_toggle(n++);
// if (n == 4)
// n =0;
// rt_thread_delay(200);
// }
while(1)
{
/* Toggle a led per second */
rt_hw_led_toggle(n++);
if (n == LEDS_MAX_NUMBER)
{
n =0;
}
rt_thread_delay(100);
}
}
int rt_application_init()
{
rt_thread_t led_thread;
rt_thread_t demo_thread, led_thread;
#if (defined(EFM32_G290_DK) && defined(EFM32_USING_SFLASH))
/* Enable SPI access to Flash */
DVK_writeRegister(BC_SPI_CFG, 0);
efm_spiFash_init();
#endif
/* Initialize all device drivers (dev_?.c) */
if (rt_hw_led_init() != RT_EOK)
......@@ -82,19 +128,32 @@ int rt_application_init()
}
#if (RT_THREAD_PRIORITY_MAX == 32)
demo_thread = rt_thread_create(
"demo",
rt_demo_thread_entry,
RT_NULL,
2048,
3,
20);
led_thread = rt_thread_create(
"led",
rt_led_thread_entry,
RT_NULL,
256,
256,
3,
20);
#else
#endif
if(demo_thread != RT_NULL)
{
rt_kprintf("demo sp:%x\n", demo_thread->sp);
rt_thread_startup(demo_thread);
}
if(led_thread != RT_NULL)
{
rt_kprintf("led sp:%x\n", led_thread->sp);
rt_thread_startup(led_thread);
}
......
bsp/efm32/board.c
浏览文件 @ 169c31fc
......@@ -12,6 +12,7 @@
* @section Change Logs
* Date Author Notes
* 2010-12-21 onelife Initial creation for EFM32
* 2011-05-06 onelife Add EFM32 development kit and SPI Flash support
*********************************************************************/
/******************************************************************//**
......@@ -189,6 +190,11 @@ void rt_hw_board_init(void)
/* Chip errata */
CHIP_Init();
#if defined(EFM32_G290_DK)
/* Initialize DVK board register access */
DVK_init();
#endif
/* NVIC Configuration */
NVIC_Configuration();
......@@ -222,6 +228,10 @@ void rt_hw_driver_init(void)
rt_hw_dma_init();
/* Initialize USART */
#if defined(EFM32_G290_DK)
DVK_enablePeripheral(DVK_RS232A);
DVK_enablePeripheral(DVK_SPI);
#endif
rt_hw_usart_init();
/* Initialize Timer */
......
bsp/efm32/board.h
浏览文件 @ 169c31fc
......@@ -12,6 +12,7 @@
* @section Change Logs
* Date Author Notes
* 2010-12-21 onelife Initial creation for EFM32
* 2011-05-06 onelife Add EFM32 development kit and SPI Flash support
*********************************************************************/
#ifndef __BOARD_H__
#define __BOARD_H__
......@@ -39,6 +40,10 @@
#include <rtthread.h>
#if defined(EFM32_G290_DK)
#include <dvk.h>
#endif
/* Exported types -------------------------------------------------------------*/
/* Exported constants ---------------------------------------------------------*/
/* Exported variables ----------------------------------------------------------*/
......@@ -48,40 +53,52 @@ extern rt_uint32_t rt_system_status;
#define DEBUG_EFM
#define DEBUG_EFM_USER
#define EFM32_NO_DATA (0)
#define EFM32_NO_OFFSET (-1)
#define EFM32_NO_POINTER (RT_NULL)
#define EFM32_SFLASH_DEBUG
#define EFM32_NO_DATA (0)
#define EFM32_NO_OFFSET (-1)
#define EFM32_NO_POINTER (RT_NULL)
#define EFM32_SRAM_END (RAM_MEM_BASE + SRAM_SIZE)
#define EFM32_SRAM_END (RAM_MEM_BASE + SRAM_SIZE)
#define EFM32_BASE_PRI_DEFAULT (0x0UL << 5)
#define EFM32_IRQ_PRI_DEFAULT (0x4UL << 5)
#define EFM32_BASE_PRI_DEFAULT (0x0UL << 5)
#define EFM32_IRQ_PRI_DEFAULT (0x4UL << 5)
#if (defined(EFM32_G890_STK) || defined(EFM32_G290_DK))
#define EFM32_HFXO_FREQUENCY (32000000)
#define EFM32_HFXO_FREQUENCY (32000000)
#else
#define EFM32_HFXO_FREQUENCY (00000000)
#define EFM32_HFXO_FREQUENCY (00000000)
#endif
#define UART_BAUDRATE (115200)
#define UART_BAUDRATE (115200)
#define USART_RX_BUFFER_SIZE (64)
#define SERIAL_RX_BUFFER_SIZE (64)
/* Max SPI clock: HFPERCLK/2 for master, HFPERCLK/8 for slave */
#define SPI_BAUDRATE (4000000)
#define IIC_RX_BUFFER_SIZE (32)
/* Slave select PIN setting for unit 2, 1 and 0 */
#define SPI_AUTOCS_ENABLE ((0 << 2) | (0 << 1) | (1 << 0))
#define ADC_INIT_REF adcRef2V5
#define ADC_INIT_CH adcSingleInpCh5
#define ADC_CONVERT_FREQUENCY (7000000)
#define IIC_RX_BUFFER_SIZE (32)
#define ADC_INIT_REF adcRef2V5
#define ADC_INIT_CH adcSingleInpCh5
#define ADC_CONVERT_FREQUENCY (7000000)
#if (RT_CONSOLE_DEVICE == 0x0UL)
#define CONSOLE_DEVICE RT_USART0_NAME
#define CONSOLE_DEVICE RT_USART0_NAME
#elif (RT_CONSOLE_DEVICE == 0x1UL)
#define CONSOLE_DEVICE RT_USART1_NAME
#define CONSOLE_DEVICE RT_USART1_NAME
#elif (RT_CONSOLE_DEVICE == 0x2UL)
#define CONSOLE_DEVICE RT_USART2_NAME
#define CONSOLE_DEVICE RT_USART2_NAME
#else
#define CONSOLE_DEVICE "no"
#define CONSOLE_DEVICE "no"
#endif
#if defined(EFM32_G290_DK)
#define EFM32_USING_SFLASH
#endif
#define SFLASH_USING_DEVICE_NAME RT_USART0_NAME
/*! fixme: move the following define to Rtdef.h */
#define RT_DEVICE_CTRL_USART_RBUFFER (0xF1) /*!< set USART rx buffer */
......
bsp/efm32/dev_led.c
浏览文件 @ 169c31fc
......@@ -12,7 +12,8 @@
* @section Change Logs
* Date Author Notes
* 2009-01-05 Bernard the first version
* 2010-12-27 onelife modify for EFM32
* 2010-12-27 onelife Modify for EFM32
* 2011-05-06 onelife Add EFM32 development kit support
*********************************************************************/
/******************************************************************//**
......@@ -28,6 +29,7 @@
/* Private define --------------------------------------------------------------*/
/* Private macro --------------------------------------------------------------*/
/* Private constants -----------------------------------------------------------*/
#if defined(EFM32_G890_STK)
static const rt_uint8_t leds_list[LEDS_MAX_NUMBER][2] = \
{
{LEDS_PIN_PORT_0, LEDS_PIN_NUMBER_0},
......@@ -35,6 +37,7 @@ static const rt_uint8_t leds_list[LEDS_MAX_NUMBER][2] = \
{LEDS_PIN_PORT_2, LEDS_PIN_NUMBER_2},
{LEDS_PIN_PORT_3, LEDS_PIN_NUMBER_3}
};
#endif
/* Private variables ------------------------------------------------------------*/
/* Private function prototypes ---------------------------------------------------*/
......@@ -54,8 +57,17 @@ static const rt_uint8_t leds_list[LEDS_MAX_NUMBER][2] = \
void rt_hw_led_on(rt_uint8_t num)
{
RT_ASSERT(num < LEDS_MAX_NUMBER);
#if defined(EFM32_G890_STK)
GPIO_PinOutSet(leds_list[num][0], leds_list[num][1]);
#elif defined(EFM32_G290_DK)
{
rt_uint16_t leds;
leds = DVK_getLEDs() | (rt_uint16_t)(1 << num);
DVK_setLEDs(leds);
}
#endif
}
/******************************************************************//**
......@@ -73,8 +85,17 @@ void rt_hw_led_on(rt_uint8_t num)
void rt_hw_led_off(rt_uint8_t num)
{
RT_ASSERT(num < LEDS_MAX_NUMBER);
#if defined(EFM32_G890_STK)
GPIO_PinOutClear(leds_list[num][0], leds_list[num][1]);
#elif defined(EFM32_G290_DK)
{
rt_uint16_t leds;
leds = DVK_getLEDs() & ~(rt_uint16_t)(1 << num);
DVK_setLEDs(leds);
}
#endif
}
/******************************************************************//**
......@@ -92,15 +113,29 @@ void rt_hw_led_off(rt_uint8_t num)
void rt_hw_led_toggle(rt_uint8_t num)
{
RT_ASSERT(num < LEDS_MAX_NUMBER);
#if defined(EFM32_G890_STK)
GPIO_PinOutToggle(leds_list[num][0], leds_list[num][1]);
#elif defined(EFM32_G290_DK)
{
rt_uint16_t leds;
leds = DVK_getLEDs() ^ (rt_uint16_t)(1 << num);
DVK_setLEDs(leds);
}
#endif
}
rt_uint8_t rt_hw_led_state(rt_uint8_t num)
{
RT_ASSERT(num < LEDS_MAX_NUMBER);
#if defined(EFM32_G890_STK)
return (rt_uint8_t)GPIO_PinInGet(leds_list[num][0], leds_list[num][1]);
#elif defined(EFM32_G290_DK)
return ((DVK_getLEDs() & (rt_uint16_t)(1 << num)) >> num);
#endif
}
/******************************************************************//**
......@@ -116,6 +151,7 @@ rt_uint8_t rt_hw_led_state(rt_uint8_t num)
*********************************************************************/
rt_err_t rt_hw_led_init(void)
{
#if defined(EFM32_G890_STK)
rt_uint8_t i;
/* Configure GPIO */
......@@ -127,7 +163,7 @@ rt_err_t rt_hw_led_init(void)
gpioModePushPull,
0);
}
#endif
return RT_EOK;
}
......@@ -146,8 +182,16 @@ void list_leds(void)
for (i = 0; i < LEDS_MAX_NUMBER; i++)
{
#if defined(EFM32_G890_STK)
rt_kprintf(" %d \t %x \t %x \t %x \n",
i, leds_list[i][0], leds_list[i][1], rt_hw_led_state(i));
#elif defined(EFM32_G290_DK)
rt_uint16_t leds;
leds = DVK_getLEDs();
rt_kprintf(" %d \t FPGA \t FPGA \t %x \n",
i, (leds & (1 << i))? 1 : 0);
#endif
}
}
FINSH_FUNCTION_EXPORT(list_leds, list all the LEDs.)
......
bsp/efm32/dev_led.h
浏览文件 @ 169c31fc
......@@ -12,7 +12,8 @@
* @section Change Logs
* Date Author Notes
* 2009-01-05 Bernard the first version
* 2010-12-27 onelife modify for EFM32
* 2010-12-27 onelife Modify for EFM32
* 2011-05-06 onelife Add EFM32 development kit support
*********************************************************************/
#ifndef __DEV_LED_H__
#define __DEV_LED_H__
......@@ -32,9 +33,8 @@
#define LEDS_PIN_NUMBER_2 (2)
#define LEDS_PIN_PORT_3 gpioPortC
#define LEDS_PIN_NUMBER_3 (3)
#elif defined(EFM32_G290_DK)
// TODO:
#define LEDS_MAX_NUMBER (16)
#endif
/* Exported functions --------------------------------------------------------- */
......
bsp/efm32/dev_sflash.c 0 → 100644
浏览文件 @ 169c31fc
/******************************************************************//**
* @file dev_sflash.c
* @brief SPI Flash driver of RT-Thread RTOS for using EFM32 USART module.
* This driver is tested by using the M25PX16 device on the EFM32 development kit.
* COPYRIGHT (C) 2011, RT-Thread Development Team
* @author onelife
* @version 0.4 beta
**********************************************************************
* @section License
* The license and distribution terms for this file may be found in the file LICENSE in this
* distribution or at http://www.rt-thread.org/license/LICENSE
**********************************************************************
* @section Change Logs
* Date Author Notes
* 2010-05-06 onelife Initial creation for using EFM32 USART module
*********************************************************************/
/******************************************************************//**
* @addtogroup efm32_dk
* @{
*********************************************************************/
/* Includes -------------------------------------------------------------------*/
#include "board.h"
#include "dev_sflash.h"
#if defined(EFM32_USING_SFLASH)
/* Private typedef -------------------------------------------------------------*/
typedef struct
{
rt_uint8_t code;
rt_uint32_t address:24;
rt_uint32_t dummy:8;
} sflash_instruction;
/* Private define --------------------------------------------------------------*/
/* Private macro --------------------------------------------------------------*/
#ifdef EFM32_SFLASH_DEBUG
#define sflash_debug(format,args...) rt_kprintf(format, ##args)
#else
#define sflash_debug(format,args...)
#endif
/* Private constants -----------------------------------------------------------*/
static rt_uint8_t sflash_inst_code_tbl[] =
{
/* Instruction only */
SFLASH_INST_CODE_WREN,
SFLASH_INST_CODE_WRDI,
SFLASH_INST_CODE_RDID_L,
SFLASH_INST_CODE_RDID_S,
SFLASH_INST_CODE_RDSR,
SFLASH_INST_CODE_WRSR,
SFLASH_INST_CODE_BE,
SFLASH_INST_CODE_DP,
SFLASH_INST_CODE_RDP,
/* Instruction and address */
SFLASH_INST_CODE_WRLR,
SFLASH_INST_CODE_RDLR,
SFLASH_INST_CODE_READ,
SFLASH_INST_CODE_POTP,
SFLASH_INST_CODE_PP,
SFLASH_INST_CODE_DIFP,
SFLASH_INST_CODE_SSE,
SFLASH_INST_CODE_SE,
/* Instruction, address and dummy read */
SFLASH_INST_CODE_READ_F,
SFLASH_INST_CODE_DOFR,
SFLASH_INST_CODE_ROTP
};
static rt_uint16_t sflash_data_len_tbl[] =
{
/* Instruction only */
SFLASH_REPLY_LEN_WREN,
SFLASH_REPLY_LEN_WRDI,
SFLASH_REPLY_LEN_RDID_L,
SFLASH_REPLY_LEN_RDID_S,
SFLASH_REPLY_LEN_RDSR,
SFLASH_REPLY_LEN_WRSR,
SFLASH_REPLY_LEN_BE,
SFLASH_REPLY_LEN_DP,
SFLASH_REPLY_LEN_RDP,
/* Instruction and address */
SFLASH_REPLY_LEN_WRLR,
SFLASH_REPLY_LEN_RDLR,
SFLASH_REPLY_LEN_READ,
SFLASH_REPLY_LEN_POTP,
SFLASH_REPLY_LEN_PP,
SFLASH_REPLY_LEN_DIFP,
SFLASH_REPLY_LEN_SSE,
SFLASH_REPLY_LEN_SE,
/* Instruction, address and dummy read */
SFLASH_REPLY_LEN_READ_F,
SFLASH_REPLY_LEN_DOFR,
SFLASH_REPLY_LEN_ROTP
};
static rt_bool_t sflash_read_inst_tbl[] =
{
/* Instruction only */
false,
false,
true,
true,
true,
false,
false,
false,
false,
/* Instruction and address */
false,
true,
true,
false,
false,
false,
false,
false,
/* Instruction, address and dummy read */
true,
true,
true
};
/* Private variables ------------------------------------------------------------*/
static rt_device_t sflash = RT_NULL;
/* Private function prototypes ---------------------------------------------------*/
/* Private functions ------------------------------------------------------------*/
/******************************************************************//**
* @brief
* Initialize the SPI Flash
*
* @details
*
* @note
*
* @return
* Error code
*********************************************************************/
rt_err_t efm_spiFash_init(void)
{
/* Find SPI device */
sflash = rt_device_find(SFLASH_USING_DEVICE_NAME);
do
{
if (sflash == RT_NULL)
{
sflash_debug("SFLASH: Can't find device %s!\n",
SFLASH_USING_DEVICE_NAME);
break;
}
sflash_debug("SFLASH: Find device %s\n", SFLASH_USING_DEVICE_NAME);
/* Open SPI device */
if (sflash->open(sflash, RT_DEVICE_OFLAG_RDWR) != RT_EOK)
{
break;
}
return RT_EOK;
} while(0);
sflash_debug("SFLASH: Init failed!\n");
return -RT_ERROR;
}
/******************************************************************//**
* @brief
* De-initialize the SPI Flash
*
* @details
*
* @note
*
* @return
* Error code
*********************************************************************/
rt_err_t efm_spiFash_deinit(void)
{
do
{
if (sflash == RT_NULL)
{
sflash_debug("SFLASH: Already deinit!\n");
break;
}
/* Close SPI device */
if (sflash->close(sflash) != RT_EOK)
{
break;
}
sflash = RT_NULL;
sflash_debug("SFLASH: Close device %s\n", SFLASH_USING_DEVICE_NAME);
return RT_EOK;
} while(0);
sflash_debug("SFLASH: Deinit failed!\n");
return -RT_ERROR;
}
/******************************************************************//**
* @brief
* Execute a command
*
* @details
*
* @note
*
* @param[in] command
* SPI Flash instruction
*
* @param[in] address
* Memory address
*
* @param[in] buffer
* Poniter to the read/write buffer
*
* @param[in] size
* Buffer size in byte
*
* @return
* Number of read/written bytes
*********************************************************************/
rt_uint32_t efm_spiFash_cmd(
enum sflash_inst_type_t command,
rt_uint32_t address,
rt_uint8_t *buffer,
rt_uint32_t size)
{
RT_ASSERT(sflash != RT_NULL);
sflash_instruction *inst;
rt_uint8_t *inst_buf;
rt_uint8_t inst_len, head_len;
rt_uint32_t data_len;
sflash_debug("SFLASH: Inst %x\n", sflash_inst_code_tbl[command]);
if (sflash_data_len_tbl[command] && !size)
{
sflash_debug("SFLASH: No data!\n");
return 0x00;
}
data_len = (sflash_data_len_tbl[command] < size)? \
sflash_data_len_tbl[command] : size;
if (data_len && (buffer == RT_NULL))
{
sflash_debug("SFLASH: No buffer specified!\n");
return 0x00;
}
/* Allocate memory for write buffer */
if (sflash_read_inst_tbl[command])
{
inst_buf = rt_malloc(6 + 4);
inst = (sflash_instruction *)(inst_buf + 1);
head_len = 1;
}
else
{
inst_buf = rt_malloc(5 + data_len);
inst = (sflash_instruction *)inst_buf;
head_len = 0;
}
/* Fill in instruction */
inst->code = sflash_inst_code_tbl[command];
if (command >= sflash_inst_wrlr)
{
/* MSB first */
inst->address = ((address & 0x000000FF) << 16) | \
(address & 0x0000FF00) | \
((address & 0x00FF0000) >> 16);
if (command >= sflash_inst_read_f)
{
inst->dummy = 0x00;
inst_len = 5;
}
else
{
inst_len = 4;
}
}
else
{
inst_len = 1;
}
head_len += inst_len;
/* Fill in data and send the buffer */
if (sflash_read_inst_tbl[command])
{
inst_buf[0] = inst_len;
*(rt_uint8_t **)(inst_buf + head_len) = buffer;
if (sflash->read(sflash, EFM32_NO_DATA, inst_buf, \
(data_len == size)? data_len - 1 : data_len) == 0)
{
sflash_debug("SFLASH: Read failed!\n");
return 0x00;
}
buffer[data_len] = 0x00;
sflash_debug("SFLASH: Read %d bytes data to 0x%x\n", data_len, buffer);
}
else
{
if (data_len)
{
rt_memcpy((inst_buf + head_len), buffer, data_len);
}
if (sflash->write(sflash, EFM32_NO_DATA, inst_buf, \
head_len + data_len) == 0)
{
sflash_debug("SFLASH: Write failed!\n");
return 0x00;
}
sflash_debug("SFLASH: Write %d/%d bytes data\n", data_len, \
head_len + data_len);
}
/* Free the buffer */
rt_free(inst_buf);
return data_len;
}
/*********************************************************************
* Export to FINSH
*********************************************************************/
#ifdef RT_USING_FINSH
#include <finsh.h>
void list_sflash(void)
{
rt_uint8_t buf[4];
efm_spiFash_cmd(sflash_inst_rdid_s, EFM32_NO_DATA, buf, sizeof(buf));
rt_kprintf(" spi flash on %s\n", SFLASH_USING_DEVICE_NAME);
rt_kprintf(" manufacturer id: \t%x\n", buf[0]);
rt_kprintf(" memory type: \t\t%x\n", buf[1]);
rt_kprintf(" memory capacity: \t%x\n", buf[2]);
}
FINSH_FUNCTION_EXPORT(list_sflash, list the SPI Flash.)
#endif
#endif /* defined(EFM32_USING_SFLASH) */
/******************************************************************//**
* @}
*********************************************************************/
bsp/efm32/dev_sflash.h 0 → 100644
浏览文件 @ 169c31fc
/******************************************************************//**
* @file dev_sflash.h
* @brief SPI Flash driver of RT-Thread RTOS for using EFM32 USART module
* This driver is tested by using the M25PX16 device on the EFM32 development kit.
* COPYRIGHT (C) 2011, RT-Thread Development Team
* @author onelife
* @version 0.4 beta
**********************************************************************
* @section License
* The license and distribution terms for this file may be found in the file LICENSE in this
* distribution or at http://www.rt-thread.org/license/LICENSE
**********************************************************************
* @section Change Logs
* Date Author Notes
* 2010-05-06 onelife Initial creation for using EFM32 USART module
*********************************************************************/
#ifndef __DEV_SFLASH_H__
#define __DEV_SFLASH_H__
/* Includes -------------------------------------------------------------------*/
/* Exported types -------------------------------------------------------------*/
enum sflash_inst_type_t
{
/* Instruction only */
sflash_inst_wren = 0x00,
sflash_inst_wrdi,
sflash_inst_rdid_l,
sflash_inst_rdid_s,
sflash_inst_rdsr,
sflash_inst_wrsr,
sflash_inst_be,
sflash_inst_dp,
sflash_inst_rdp,
/* Instruction and address */
sflash_inst_wrlr,
sflash_inst_rdlr,
sflash_inst_read,
sflash_inst_potp,
sflash_inst_pp,
sflash_inst_difp,
sflash_inst_sse,
sflash_inst_se,
/* Instruction, address and dummy read */
sflash_inst_read_f,
sflash_inst_dofr,
sflash_inst_rotp
};
/* Exported constants ---------------------------------------------------------*/
/* Exported macro -------------------------------------------------------------*/
#define SFLASH_INST_CODE_WREN (0x06)
#define SFLASH_INST_CODE_WRDI (0x04)
#define SFLASH_INST_CODE_RDID_L (0x9F)
#define SFLASH_INST_CODE_RDID_S (0x9E)
#define SFLASH_INST_CODE_RDSR (0x05)
#define SFLASH_INST_CODE_WRSR (0x01)
#define SFLASH_INST_CODE_WRLR (0xE5)
#define SFLASH_INST_CODE_RDLR (0xE8)
#define SFLASH_INST_CODE_READ (0x03)
#define SFLASH_INST_CODE_READ_F (0x0B)
#define SFLASH_INST_CODE_DOFR (0x3B)
#define SFLASH_INST_CODE_ROTP (0x4B)
#define SFLASH_INST_CODE_POTP (0x42)
#define SFLASH_INST_CODE_PP (0x02)
#define SFLASH_INST_CODE_DIFP (0xA2)
#define SFLASH_INST_CODE_SSE (0x20)
#define SFLASH_INST_CODE_SE (0xD8)
#define SFLASH_INST_CODE_BE (0xC7)
#define SFLASH_INST_CODE_DP (0xB9)
#define SFLASH_INST_CODE_RDP (0xAB)
#define SFLASH_REPLY_LEN_WREN (0)
#define SFLASH_REPLY_LEN_WRDI (0)
#define SFLASH_REPLY_LEN_RDID_L (20)
#define SFLASH_REPLY_LEN_RDID_S (3)
#define SFLASH_REPLY_LEN_RDSR (1)
#define SFLASH_REPLY_LEN_WRSR (1)
#define SFLASH_REPLY_LEN_WRLR (1)
#define SFLASH_REPLY_LEN_RDLR (1)
#define SFLASH_REPLY_LEN_READ (-1)
#define SFLASH_REPLY_LEN_READ_F (-1)
#define SFLASH_REPLY_LEN_DOFR (-1)
#define SFLASH_REPLY_LEN_ROTP (65)
#define SFLASH_REPLY_LEN_POTP (65)
#define SFLASH_REPLY_LEN_PP (256)
#define SFLASH_REPLY_LEN_DIFP (256)
#define SFLASH_REPLY_LEN_SSE (0)
#define SFLASH_REPLY_LEN_SE (0)
#define SFLASH_REPLY_LEN_BE (0)
#define SFLASH_REPLY_LEN_DP (0)
#define SFLASH_REPLY_LEN_RDP (0)
/* Exported functions --------------------------------------------------------- */
rt_err_t efm_spiFash_init(void);
rt_err_t efm_spiFash_deinit(void);
rt_uint32_t efm_spiFash_cmd(
enum sflash_inst_type_t command,
rt_uint32_t address,
rt_uint8_t *buffer,
rt_uint32_t size);
#endif /* __DEV_SFLASH_H__ */
bsp/efm32/drv_usart.c
浏览文件 @ 169c31fc
......@@ -13,6 +13,7 @@
* Date Author Notes
* 2010-12-22 onelife Initial creation for EFM32
* 2011-01-17 onelife Merge with serial.c
* 2011-05-06 onelife Add sync mode (SPI) support
*
* @section Change Logs of serial.c
* 2009-02-05 Bernard first version
......@@ -31,8 +32,20 @@
#include "drv_usart.h"
/* Private typedef -------------------------------------------------------------*/
union efm32_usart_init_t
{
USART_InitAsync_TypeDef async;
USART_InitSync_TypeDef sync;
};
/* Private define --------------------------------------------------------------*/
/* Private macro --------------------------------------------------------------*/
#ifdef RT_USART_DEBUG
#define usart_debug(format,args...) rt_kprintf(format, ##args)
#else
#define usart_debug(format,args...)
#endif
/* Private variables ------------------------------------------------------------*/
#ifdef RT_USING_USART0
#if (RT_USING_USART0 > 3)
......@@ -128,64 +141,64 @@ static rt_err_t rt_usart_open(rt_device_t dev, rt_uint16_t oflag)
RT_ASSERT(dev != RT_NULL);
struct efm32_usart_device_t *usart;
IRQn_Type rxIrq;
usart = (struct efm32_usart_device_t *)(dev->user_data);
//if (usart->state & USART_STATE_CONSOLE)
{ /* Allocate new RX buffer */
struct efm32_usart_int_mode_t *int_mode;
usart = (struct efm32_usart_device_t *)(dev->user_data);
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
IRQn_Type rxIrq;
int_mode = (struct efm32_usart_int_mode_t *)(usart->rx_mode);
//if (usart->state & USART_STATE_CONSOLE)
{ /* Allocate new RX buffer */
struct efm32_usart_int_mode_t *int_mode;
int_mode = (struct efm32_usart_int_mode_t *)(usart->rx_mode);
if ((int_mode->data_ptr = rt_malloc(SERIAL_RX_BUFFER_SIZE)) == RT_NULL)
if ((int_mode->data_ptr = rt_malloc(USART_RX_BUFFER_SIZE)) == RT_NULL)
{
usart_debug("USART: no memory for RX buffer\n");
return -RT_ENOMEM;
}
rt_memset(int_mode->data_ptr, 0, USART_RX_BUFFER_SIZE);
int_mode->data_size = USART_RX_BUFFER_SIZE;
int_mode->read_index = 0;
int_mode->save_index = 0;
}
/* Enable TX/RX interrupt */
switch (usart->unit)
{
#ifdef RT_USART_DEBUG
rt_kprintf("no memory for serial RX buffer\n");
#endif
return -RT_ENOMEM;
case 0:
rxIrq = USART0_RX_IRQn;
break;
case 1:
rxIrq = USART1_RX_IRQn;
break;
case 2:
rxIrq = USART2_RX_IRQn;
break;
}
rt_memset(int_mode->data_ptr, 0, SERIAL_RX_BUFFER_SIZE);
int_mode->data_size = SERIAL_RX_BUFFER_SIZE;
int_mode->read_index = 0;
int_mode->save_index = 0;
}
/* Enable TX/RX interrupt */
switch (usart->unit)
{
case 0:
rxIrq = USART0_RX_IRQn;
break;
case 1:
rxIrq = USART1_RX_IRQn;
break;
case 2:
rxIrq = USART2_RX_IRQn;
break;
}
/* Enable RX interrupts */
usart->usart_device->IEN = USART_IEN_RXDATAV;
usart->usart_device->IFC = _USART_IFC_MASK;
/* Enable RX interrupts */
usart->usart_device->IEN = USART_IEN_RXDATAV;
/* Enable IRQ */
if (oflag != RT_DEVICE_OFLAG_WRONLY)
{
NVIC_ClearPendingIRQ(rxIrq);
NVIC_SetPriority(rxIrq, EFM32_IRQ_PRI_DEFAULT);
NVIC_EnableIRQ(rxIrq);
/* Enable IRQ */
if (oflag != RT_DEVICE_OFLAG_WRONLY)
{
NVIC_ClearPendingIRQ(rxIrq);
NVIC_SetPriority(rxIrq, EFM32_IRQ_PRI_DEFAULT);
NVIC_EnableIRQ(rxIrq);
}
}
if (oflag != RT_DEVICE_OFLAG_RDONLY)
usart->usart_device->IFC = _USART_IFC_MASK;
if ((dev->flag & RT_DEVICE_FLAG_DMA_TX) && (oflag != RT_DEVICE_OFLAG_RDONLY))
{
/* DMA IRQ is enabled by DMA_Init() */
NVIC_SetPriority(DMA_IRQn, EFM32_IRQ_PRI_DEFAULT);
}
#ifdef RT_USART_DEBUG
rt_kprintf("USART%d: Open with flag %x\n", usart->unit, oflag);
#endif
usart_debug("USART%d: Open with flag %x\n", usart->unit, oflag);
return RT_EOK;
}
......@@ -205,14 +218,16 @@ static rt_err_t rt_usart_open(rt_device_t dev, rt_uint16_t oflag)
*********************************************************************/
static rt_err_t rt_usart_close(rt_device_t dev)
{
struct efm32_usart_int_mode_t *int_rx;
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
struct efm32_usart_int_mode_t *int_rx;
int_rx = (struct efm32_usart_int_mode_t *)\
(((struct efm32_usart_device_t *)(dev->user_data))->rx_mode);
rt_free(int_rx->data_ptr);
int_rx->data_ptr = RT_NULL;
int_rx = (struct efm32_usart_int_mode_t *)\
(((struct efm32_usart_device_t *)(dev->user_data))->rx_mode);
rt_free(int_rx->data_ptr);
int_rx->data_ptr = RT_NULL;
}
return RT_EOK;
}
......@@ -242,17 +257,19 @@ static rt_err_t rt_usart_close(rt_device_t dev)
static rt_size_t rt_usart_read (
rt_device_t dev,
rt_off_t pos,
void* buffer,
void *buffer,
rt_size_t size)
{
rt_uint8_t* ptr;
rt_uint8_t *ptr;
rt_err_t err_code;
rt_size_t read_len;
ptr = buffer;
err_code = RT_EOK;
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
{
ptr = buffer;
/* interrupt mode Rx */
while (size)
{
......@@ -273,7 +290,7 @@ static rt_size_t rt_usart_read (
/* move to next position */
int_rx->read_index ++;
if (int_rx->read_index >= SERIAL_RX_BUFFER_SIZE)
if (int_rx->read_index >= USART_RX_BUFFER_SIZE)
{
int_rx->read_index = 0;
}
......@@ -291,28 +308,77 @@ static rt_size_t rt_usart_read (
/* enable interrupt */
rt_hw_interrupt_enable(level);
}
read_len = (rt_uint32_t)ptr - (rt_uint32_t)buffer;
}
else
{
/* polling mode */
RT_ASSERT(buffer != RT_NULL);
struct efm32_usart_device_t *usart;
USART_TypeDef *usart_device;
RT_ASSERT(buffer != RT_NULL);
usart = (struct efm32_usart_device_t *)(dev->user_data);
usart_device = ((struct efm32_usart_device_t *)(dev->user_data))->usart_device;
while ((rt_uint32_t)ptr - (rt_uint32_t)buffer < size)
if (usart->state & USART_STATE_SYNC)
{
while (usart_device->STATUS & USART_STATUS_RXDATAV)
/* SPI read */
rt_uint8_t inst_len = *((rt_uint8_t *)buffer);
rt_uint8_t *inst_ptr = (rt_uint8_t *)(buffer + 1);
rt_uint8_t *rx_buf = *((rt_uint8_t **)(buffer + inst_len + 1));
ptr = rx_buf;
/* write instruction */
while (inst_len)
{
while (!(usart->usart_device->STATUS & USART_STATUS_TXBL));
usart->usart_device->TXDATA = (rt_uint32_t)*inst_ptr;
++inst_ptr; --inst_len;
}
/* Flushing RX */
usart_device->CMD = USART_CMD_CLEARRX;
/* dummy write */
while (!(usart_device->STATUS & USART_STATUS_TXBL));
usart_device->TXDATA = (rt_uint32_t)0x00;
/* dummy read */
while (!(usart_device->STATUS & USART_STATUS_RXDATAV));
*((rt_uint32_t *)0x00) = usart_device->RXDATA;
while ((rt_uint32_t)ptr - (rt_uint32_t)rx_buf < size)
{
/* dummy write */
while (!(usart_device->STATUS & USART_STATUS_TXBL));
usart_device->TXDATA = (rt_uint32_t)0x00;
/* read a byte of data */
while (!(usart_device->STATUS & USART_STATUS_RXDATAV));
*ptr = usart_device->RXDATA & 0xff;
ptr ++;
}
}
else
{
ptr = buffer;
/* polling mode */
while ((rt_uint32_t)ptr - (rt_uint32_t)buffer < size)
{
while (usart_device->STATUS & USART_STATUS_RXDATAV)
{
*ptr = usart_device->RXDATA & 0xff;
ptr ++;
}
}
}
read_len = size;
}
/* set error code */
rt_set_errno(err_code);
return (rt_uint32_t)ptr - (rt_uint32_t)buffer;
return read_len;
}
/******************************************************************//**
......@@ -336,7 +402,7 @@ static rt_size_t rt_usart_read (
* Buffer size in byte
*
* @return
* Error code
* Number of written bytes
*********************************************************************/
static rt_size_t rt_usart_write (
rt_device_t dev,
......@@ -352,7 +418,7 @@ static rt_size_t rt_usart_write (
write_size = 0;
usart = (struct efm32_usart_device_t*)(dev->user_data);
if (dev->flag & RT_DEVICE_FLAG_DMA_TX)
if ((dev->flag & RT_DEVICE_FLAG_DMA_TX) && (size > 1))
{ /* DMA mode Tx */
struct efm32_usart_dma_mode_t *dma_tx;
......@@ -393,7 +459,7 @@ static rt_size_t rt_usart_write (
}
else
{ /* polling mode */
rt_uint8_t* ptr = (rt_uint8_t*)buffer;
rt_uint8_t *ptr = (rt_uint8_t *)buffer;
if (dev->flag & RT_DEVICE_FLAG_STREAM)
{
......@@ -408,7 +474,6 @@ static rt_size_t rt_usart_write (
while (!(usart->usart_device->STATUS & USART_STATUS_TXBL));
usart->usart_device->TXDATA = (rt_uint32_t)*ptr;
++ptr; --size;
}
}
......@@ -419,7 +484,6 @@ static rt_size_t rt_usart_write (
{
while (!(usart->usart_device->STATUS & USART_STATUS_TXBL));
usart->usart_device->TXDATA = (rt_uint32_t)*ptr;
++ptr; --size;
}
}
......@@ -500,9 +564,7 @@ static rt_err_t rt_usart_control (
if ((int_rx->data_ptr = rt_realloc(int_rx->data_ptr, size)) \
== RT_NULL)
{
#ifdef RT_USART_DEBUG
rt_kprintf("no memory for usart rx buffer\n");
#endif
usart_debug("USART: no memory for RX buffer\n");
return -RT_ENOMEM;
}
// TODO: Is the following line necessary?
......@@ -514,9 +576,7 @@ static rt_err_t rt_usart_control (
/* Allocate new RX buffer */
if ((int_rx->data_ptr = rt_malloc(size)) == RT_NULL)
{
#ifdef RT_USART_DEBUG
rt_kprintf("no memory for usart rx buffer\n");
#endif
usart_debug("USART: no memory for RX buffer\n");
return -RT_ENOMEM;
}
}
......@@ -570,14 +630,14 @@ void rt_hw_usart_rx_isr(rt_device_t dev)
int_rx->data_ptr[int_rx->save_index] = \
(rt_uint8_t)(usart->usart_device->RXDATA & 0xFFUL);
int_rx->save_index ++;
if (int_rx->save_index >= SERIAL_RX_BUFFER_SIZE)
if (int_rx->save_index >= USART_RX_BUFFER_SIZE)
int_rx->save_index = 0;
/* if the next position is read index, discard this 'read char' */
if (int_rx->save_index == int_rx->read_index)
{
int_rx->read_index ++;
if (int_rx->read_index >= SERIAL_RX_BUFFER_SIZE)
if (int_rx->read_index >= USART_RX_BUFFER_SIZE)
{
int_rx->read_index = 0;
}
......@@ -594,7 +654,7 @@ void rt_hw_usart_rx_isr(rt_device_t dev)
/* get rx length */
rx_length = int_rx->read_index > int_rx->save_index ?
SERIAL_RX_BUFFER_SIZE - int_rx->read_index + int_rx->save_index : \
USART_RX_BUFFER_SIZE - int_rx->read_index + int_rx->save_index : \
int_rx->save_index - int_rx->read_index;
dev->rx_indicate(dev, rx_length);
......@@ -720,33 +780,24 @@ static struct efm32_usart_device_t *rt_hw_usart_unit_init(
rt_uint8_t location,
rt_uint32_t flag,
rt_uint32_t dmaChannel,
rt_bool_t console)
rt_uint8_t config)
{
struct efm32_usart_device_t *usart;
struct efm32_usart_dma_mode_t *dma_mode;
CMU_Clock_TypeDef usartClock;
rt_uint32_t txDmaSelect;
USART_InitAsync_TypeDef init;
union efm32_usart_init_t init;
efm32_irq_hook_init_t hook;
/* Allocate device */
usart = rt_malloc(sizeof(struct efm32_usart_device_t));
if (usart == RT_NULL)
{
#ifdef RT_USART_DEBUG
rt_kprintf("no memory for USART driver\n");
#endif
usart_debug("USART: no memory for device\n");
return usart;
}
usart->unit = unitNumber;
if (console == true)
{
usart->state = USART_STATE_CONSOLE;
}
else
{
usart->state = 0;
}
usart->state = config;
usart->tx_mode = RT_NULL;
usart->rx_mode = RT_NULL;
......@@ -757,9 +808,7 @@ static struct efm32_usart_device_t *rt_hw_usart_unit_init(
usart->tx_mode = dma_mode = rt_malloc(sizeof(struct efm32_usart_dma_mode_t));
if (dma_mode == RT_NULL)
{
#ifdef RT_USART_DEBUG
rt_kprintf("no memory for USART TX by DMA\n");
#endif
usart_debug("USART: no memory for DMA TX\n");
rt_free(usart->rx_mode);
rt_free(usart);
usart = RT_NULL;
......@@ -774,9 +823,7 @@ static struct efm32_usart_device_t *rt_hw_usart_unit_init(
usart->rx_mode = rt_malloc(sizeof(struct efm32_usart_int_mode_t));
if (usart->rx_mode == RT_NULL)
{
#ifdef RT_USART_DEBUG
rt_kprintf("no memory for USART RX by interrupt\n");
#endif
usart_debug("USART: no memory for interrupt RX\n");
rt_free(usart->tx_mode);
rt_free(usart);
usart = RT_NULL;
......@@ -823,6 +870,22 @@ static struct efm32_usart_device_t *rt_hw_usart_unit_init(
AF_PIN(AF_USART_RX(unitNumber), location),
gpioModeInputPull,
1);
if (config & USART_STATE_SYNC)
{
GPIO_PinModeSet(
(GPIO_Port_TypeDef)AF_PORT(AF_USART_CLK(unitNumber), location),
AF_PIN(AF_USART_CLK(unitNumber), location),
gpioModePushPull,
0);
}
if (config & USART_STATE_AUTOCS)
{
GPIO_PinModeSet(
(GPIO_Port_TypeDef)AF_PORT(AF_USART_CS(unitNumber), location),
AF_PIN(AF_USART_CS(unitNumber), location),
gpioModePushPull,
1);
}
/* Config interrupt and NVIC */
if (flag & RT_DEVICE_FLAG_INT_RX)
......@@ -871,16 +934,49 @@ static struct efm32_usart_device_t *rt_hw_usart_unit_init(
/* Enable RX and TX pins and set location */
usart->usart_device->ROUTE = USART_ROUTE_RXPEN | USART_ROUTE_TXPEN | \
(location << _USART_ROUTE_LOCATION_SHIFT);
if (config & USART_STATE_SYNC)
{
usart->usart_device->ROUTE |= USART_ROUTE_CLKPEN;
}
if (config & USART_STATE_AUTOCS)
{
usart->usart_device->ROUTE |= USART_ROUTE_CSPEN;
if (config & USART_STATE_MASTER)
{
usart->usart_device->CTRL |= USART_CTRL_AUTOCS;
}
}
/* Init specified USART unit */
init.enable = usartEnable;
init.refFreq = 0;
init.baudrate = UART_BAUDRATE;
init.oversampling = USART_CTRL_OVS_X4;
init.databits = USART_FRAME_DATABITS_EIGHT;
init.parity = USART_FRAME_PARITY_NONE;
init.stopbits = USART_FRAME_STOPBITS_ONE;
USART_InitAsync(usart->usart_device, &init);
if (config & USART_STATE_SYNC)
{
init.sync.enable = usartEnable;
init.sync.refFreq = 0;
init.sync.baudrate = SPI_BAUDRATE;
init.sync.databits = usartDatabits8;
if (config & USART_STATE_MASTER)
{
init.sync.master = true;
}
else
{
init.sync.master = false;
}
init.sync.msbf = true;
init.sync.clockMode = usartClockMode0; /* Clock idle low, sample on rising edge. */
USART_InitSync(usart->usart_device, &init.sync);
}
else
{
init.async.enable = usartEnable;
init.async.refFreq = 0;
init.async.baudrate = UART_BAUDRATE;
init.async.oversampling = USART_CTRL_OVS_X4;
init.async.databits = USART_FRAME_DATABITS_EIGHT;
init.async.parity = USART_FRAME_PARITY_NONE;
init.async.stopbits = USART_FRAME_STOPBITS_ONE;
USART_InitAsync(usart->usart_device, &init.async);
}
/* Clear RX/TX buffers */
usart->usart_device->CMD = USART_CMD_CLEARRX | USART_CMD_CLEARTX;
......@@ -900,17 +996,31 @@ void rt_hw_usart_init(void)
{
struct efm32_usart_device_t *usart;
rt_uint32_t flag;
rt_bool_t console;
rt_uint8_t config;
/* Register usart0 */
#ifdef RT_USING_USART0
config = 0x00;
flag = RT_DEVICE_FLAG_RDWR;
#ifdef RT_USART0_SYNC_MODE
config |= USART_STATE_SYNC;
#if (RT_USART0_SYNC_MODE != 0x0UL)
config |= USART_STATE_MASTER;
#else
flag |= RT_DEVICE_FLAG_INT_RX;
#endif
#else
flag |= RT_DEVICE_FLAG_INT_RX;
#endif
#if (SPI_AUTOCS_ENABLE & (1 << 0))
config |= USART_STATE_AUTOCS;
#endif
#if (RT_CONSOLE_DEVICE == 0x0UL)
console = true;
config |= USART_STATE_CONSOLE;
flag |= RT_DEVICE_FLAG_STREAM;
#else
console = false;
#endif
#ifdef RT_USART0_USING_DMA
......@@ -920,28 +1030,40 @@ void rt_hw_usart_init(void)
#define RT_USART0_USING_DMA EFM32_NO_DATA
#endif
flag |= RT_DEVICE_FLAG_INT_RX;
usart = rt_hw_usart_unit_init(
&usart0_device,
0,
RT_USING_USART0,
flag,
RT_USART0_USING_DMA,
console);
config);
rt_hw_usart_register(&usart0_device, RT_USART0_NAME, flag, usart);
#endif
/* Register usart1 */
#ifdef RT_USING_USART1
config = 0x00;
flag = RT_DEVICE_FLAG_RDWR;
#ifdef RT_USART1_SYNC_MODE
config |= USART_STATE_SYNC;
#if (RT_USART1_SYNC_MODE != 0x0UL)
config |= USART_STATE_MASTER;
#else
flag |= RT_DEVICE_FLAG_INT_RX;
#endif
#else
flag |= RT_DEVICE_FLAG_INT_RX;
#endif
#if (SPI_AUTOCS_ENABLE & (1 << 1))
config |= USART_STATE_AUTOCS;
#endif
#if (RT_CONSOLE_DEVICE == 0x1UL)
console = true;
config |= USART_STATE_CONSOLE;
flag |= RT_DEVICE_FLAG_STREAM;
#else
console = false;
#endif
#ifdef RT_USART1_USING_DMA
......@@ -951,8 +1073,6 @@ void rt_hw_usart_init(void)
#define RT_USART1_USING_DMA EFM32_NO_DATA
#endif
flag |= RT_DEVICE_FLAG_INT_RX;
usart = rt_hw_usart_unit_init(
&usart1_device,
......@@ -960,22 +1080,36 @@ void rt_hw_usart_init(void)
RT_USING_USART1,
flag,
RT_USART1_USING_DMA,
console);
config);
rt_hw_usart_register(&usart1_device, RT_USART1_NAME, flag, usart);
#endif
/* Register usart2 */
#ifdef RT_USING_USART2
config = 0x00;
flag = RT_DEVICE_FLAG_RDWR;
#if (RT_CONSOLE_DEVICE == 0x2UL)
console = true;
flag |= RT_DEVICE_FLAG_STREAM;
#ifdef RT_USART2_SYNC_MODE
config |= USART_STATE_SYNC;
#if (RT_USART2_SYNC_MODE != 0x0UL)
config |= USART_STATE_MASTER;
#else
flag |= RT_DEVICE_FLAG_INT_RX;
#endif
#else
console = false;
flag |= RT_DEVICE_FLAG_INT_RX;
#endif
#if (SPI_AUTOCS_ENABLE & (1 << 2))
config |= USART_STATE_AUTOCS;
#endif
#if (RT_CONSOLE_DEVICE == 0x2UL)
config |= USART_STATE_CONSOLE;
flag |= RT_DEVICE_FLAG_STREAM;
#endif
#ifdef RT_USART2_USING_DMA
RT_ASSERT(RT_USART2_USING_DMA < DMA_CHAN_COUNT);
flag |= RT_DEVICE_FLAG_DMA_TX;
......@@ -985,15 +1119,13 @@ void rt_hw_usart_init(void)
#define RT_USART2_USING_DMA EFM32_NO_DATA
#endif
flag |= RT_DEVICE_FLAG_INT_RX;
usart = rt_hw_usart_unit_init(
&usart2_device,
2,
RT_USING_USART2,
flag,
RT_USART2_USING_DMA,
console);
config);
rt_hw_usart_register(&usart2_device, RT_USART2_NAME, flag, usart);
#endif
......
bsp/efm32/drv_usart.h
浏览文件 @ 169c31fc
......@@ -54,8 +54,11 @@ struct efm32_usart_device_t
#define USART_WAIT_TIME_TX (RT_TICK_PER_SECOND / 100 * 3)
#define USART_STATE_CONSOLE (1 << 0)
#define USART_STATE_TX_BUSY (1 << 1)
#define USART_STATE_RX_BUSY (1 << 2)
#define USART_STATE_SYNC (1 << 1)
#define USART_STATE_MASTER (1 << 2)
#define USART_STATE_AUTOCS (1 << 3)
#define USART_STATE_TX_BUSY (1 << 4)
#define USART_STATE_RX_BUSY (1 << 5)
/* Exported functions --------------------------------------------------------- */
......
bsp/efm32/hdl_interrupt.c
浏览文件 @ 169c31fc
......@@ -563,7 +563,7 @@ void I2C0_IRQHandler(void)
* @note
*
*********************************************************************/
rt_err_t efm32_irq_hook_register(efm32_irq_hook_init_t *hook)
void efm32_irq_hook_register(efm32_irq_hook_init_t *hook)
{
switch (hook->type)
{
......
bsp/efm32/hdl_interrupt.h
浏览文件 @ 169c31fc
......@@ -55,7 +55,7 @@ typedef struct
//void SVC_Handler(void);
//void DebugMon_Handler(void);
void DMA_IRQHandler_All(unsigned int channel, bool primary, void *user);
rt_err_t efm32_irq_hook_register(efm32_irq_hook_init_t *hook);
void efm32_irq_hook_register(efm32_irq_hook_init_t *hook);
#endif /* __HDL_INTERRUPT_H__ */
bsp/efm32/rtconfig.h
浏览文件 @ 169c31fc
......@@ -39,7 +39,7 @@
//#define RT_ADC_DEBUG
//#define RT_ACMP_DEBUG
//#define RT_TIMER_DEBUG
//#define RT_USART_DEBUG
#define RT_USART_DEBUG
/* Using Hook */
//#define RT_USING_HOOK
......@@ -82,15 +82,28 @@
/* USART Device for Console */
#if defined(EFM32_G290_DK)
#define RT_USING_USART0 0x2UL
#define RT_USART0_NAME "debug"
#define RT_USART0_USING_DMA 0x0UL
#define RT_USING_USART1 0x0UL
#define RT_USART1_NAME "debug"
#define RT_USART1_USING_DMA 0x0UL
#elif defined(EFM32_G890_STK)
#define RT_USING_USART1 0x1UL
#define RT_USART1_NAME "debug"
#define RT_USART1_USING_DMA 0x0UL
#endif
/* SECTION: SPI options */
#if defined(EFM32_G290_DK)
#define RT_USING_USART0 0x2UL
#define RT_USART0_SYNC_MODE 0x1UL /* Master */
#define RT_USART0_NAME "spi0"
#define RT_USART0_USING_DMA 0x1UL
#elif defined(EFM32_G890_STK)
//#define RT_USING_USART0 0x0UL
//#define RT_USART0_SYNC_MODE 0x1UL /* Master */
//#define RT_USART0_NAME "spi0"
//#define RT_USART0_USING_DMA 0x1UL
#endif
/* SECTION: RTC options */
#if (defined(EFM32_G290_DK) || defined(EFM32_G890_STK))
#define RT_USING_RTC
......@@ -107,7 +120,7 @@
/* SECTION: Serial options */
#if defined(EFM32_G290_DK)
#define RT_CONSOLE_DEVICE 0x0UL
#define RT_CONSOLE_DEVICE 0x1UL
#elif defined(EFM32_G890_STK)
#define RT_CONSOLE_DEVICE 0x1UL
#endif
......@@ -125,4 +138,4 @@
/* Exported functions --------------------------------------------------------- */
#endif /* __RTTHREAD_CFG_H__ */
\ No newline at end of file
#endif /* __RTTHREAD_CFG_H__ */
bsp/efm32/rtconfig.py
浏览文件 @ 169c31fc
......@@ -8,8 +8,8 @@ if CROSS_TOOL == 'gcc':
EXEC_PATH = 'C:\Program Files (x86)\CodeSourcery\Sourcery G++ Lite\bin'
BUILD = 'debug'
EFM32_BOARD = 'EFM32_G890_STK'
# EFM32_BOARD = 'EFM32_G290_DK'
# EFM32_BOARD = 'EFM32_G890_STK'
EFM32_BOARD = 'EFM32_G290_DK'
if EFM32_BOARD == 'EFM32_G890_STK':
EFM32_TYPE = 'EFM32G890F128'
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或