Skip to content

R
rt-thread

天中雨水 / rt-thread
该项目与 Fork 源项目分叉

Fork自 RT-Thread / rt-thread

通知 2
Star 1
Fork 0
R
rt-thread

体验新版 GitCode，发现更多精彩内容 >>

提交 071c2d3f 编写于 作者: B balanceTWK
浏览文件
操作

[BSP][imxrt1052] add baudrate options, Delete simulate i2c .

上级 388e4267
隐藏空白更改
内联 并排
Showing with 206 addition and 346 deletion
bsp/imxrt1052-evk/Kconfig
浏览文件 @ 071c2d3f
......@@ -267,56 +267,64 @@ menu "Select spi bus and dev drivers"
depends on RT_USING_SPI_FLASH
endmenu
menu "Select i2c bus drivers"
menu "Select iic bus drivers"
config LPI2C_CLOCK_SOURCE_DIVIDER
int "lpi2c bus clock source divider"
range 1 64
default 4
config RT_USING_I2C1
bool "USING I2C1"
config RT_USING_HW_I2C1
bool "using hardware i2c1"
select RT_USING_I2C
default y
if RT_USING_I2C1
config RT_USING_I2C1_BITOPS
select RT_USING_I2C_BITOPS
default n
bool "using simulate I2C1"
endif
config RT_USING_I2C2
bool "USING I2C2"
choice
prompt "i2c1 bus badurate choice"
default HW_I2C1_BADURATE_100kHZ
depends on RT_USING_HW_I2C1
config HW_I2C1_BADURATE_100kHZ
bool "100kHZ"
config HW_I2C1_BADURATE_400kHZ
bool "400kHZ"
endchoice
config RT_USING_HW_I2C2
bool "using hardware i2c2"
select RT_USING_I2C
default n
if RT_USING_I2C2
config RT_USING_I2C2_BITOPS
select RT_USING_I2C_BITOPS
default n
bool "using simulate I2C2"
endif
config RT_USING_I2C3
bool "USING I2C3"
choice
prompt "i2c2 bus badurate choice"
default HW_I2C2_BADURATE_100kHZ
depends on RT_USING_HW_I2C2
config HW_I2C2_BADURATE_100kHZ
bool "100kHZ"
config HW_I2C2_BADURATE_400kHZ
bool "400kHZ"
endchoice
config RT_USING_HW_I2C3
bool "using hardware i2c3"
select RT_USING_I2C
default n
if RT_USING_I2C3
config RT_USING_I2C3_BITOPS
select RT_USING_I2C_BITOPS
default n
bool "using simulate I2C3"
endif
config RT_USING_I2C4
bool "USING I2C4"
choice
prompt "i2c3 bus badurate choice"
default HW_I2C3_BADURATE_100kHZ
depends on RT_USING_HW_I2C3
config HW_I2C3_BADURATE_100kHZ
bool "100kHZ"
config HW_I2C3_BADURATE_400kHZ
bool "400kHZ"
endchoice
config RT_USING_HW_I2C4
bool "using hardware i2c4"
select RT_USING_I2C
default n
if RT_USING_I2C4
config RT_USING_I2C4_BITOPS
select RT_USING_I2C_BITOPS
default n
bool "using simulate I2C4"
endif
choice
prompt "i2c4 bus badurate choice"
default HW_I2C4_BADURATE_100kHZ
depends on RT_USING_HW_I2C4
config HW_I2C4_BADURATE_100kHZ
bool "100kHZ"
config HW_I2C4_BADURATE_400kHZ
bool "400kHZ"
endchoice
endmenu
menu "Select lcd driver"
......
bsp/imxrt1052-evk/drivers/drv_i2c.c
浏览文件 @ 071c2d3f
......@@ -38,140 +38,44 @@
#define I2C3BUS_NAME "i2c3"
#define I2C4BUS_NAME "i2c4"
/* Get frequency of lpi2c clock */
#define LPI2C_CLOCK_FREQUENCY ((CLOCK_GetFreq(kCLOCK_Usb1PllClk) / 8) / (LPI2C_CLOCK_SOURCE_DIVIDER + 1U))
#if defined(RT_USING_I2C_BITOPS) && (defined(RT_USING_I2C1_BITOPS) || defined(RT_USING_I2C2_BITOPS) || \
defined(RT_USING_I2C3_BITOPS) || defined(RT_USING_I2C4_BITOPS))
struct rt1052_i2c_bit_data
{
struct
{
GPIO_Type *base;
uint32_t pin;
} scl, sda;
};
static void gpio_udelay(rt_uint32_t us)
{
volatile rt_int32_t i;
for (; us > 0; us--)
{
i = 100;
while (i--);
}
}
static void gpio_set_input(GPIO_Type *base, uint32_t pin)
{
if (base->GDIR & (1 << pin))
{
base->GDIR &= ~(1 << pin);
gpio_udelay(5);
}
}
static void gpio_set_output(GPIO_Type *base, uint32_t pin)
{
if (!(base->GDIR & (1 << pin)))
{
base->GDIR |= (1 << pin);
gpio_udelay(5);
}
}
static void gpio_set_sda(void *data, rt_int32_t state)
{
struct rt1052_i2c_bit_data *bd = data;
gpio_set_output(bd->sda.base, bd->sda.pin);
GPIO_PinWrite(bd->sda.base, bd->sda.pin, !!state);
}
static void gpio_set_scl(void *data, rt_int32_t state)
{
struct rt1052_i2c_bit_data *bd = data;
gpio_set_output(bd->scl.base, bd->scl.pin);
GPIO_PinWrite(bd->scl.base, bd->scl.pin, !!state);
}
static rt_int32_t gpio_get_sda(void *data)
{
struct rt1052_i2c_bit_data *bd = data;
gpio_set_input(bd->sda.base, bd->sda.pin);
return GPIO_ReadPinInput(bd->sda.base, bd->sda.pin);
}
static rt_int32_t gpio_get_scl(void *data)
{
struct rt1052_i2c_bit_data *bd = data;
gpio_set_input(bd->scl.base, bd->scl.pin);
return GPIO_ReadPinInput(bd->scl.base, bd->scl.pin);
}
#endif
#define LPI2C_CLOCK_SOURCE_DIVIDER 4
#ifdef RT_USING_I2C1
#ifdef RT_USING_I2C1_BITOPS
/* Get frequency of lpi2c clock */
#define LPI2C_CLOCK_FREQUENCY ((CLOCK_GetFreq(kCLOCK_Usb1PllClk) / 8) / (LPI2C_CLOCK_SOURCE_DIVIDER))
#else
#ifdef RT_USING_HW_I2C1
static struct rt1052_i2c_bus lpi2c1 =
{
.I2C = LPI2C1,
.device_name = I2C1BUS_NAME,
};
#endif /* RT_USING_I2C1_BITOPS */
#endif /* RT_USING_I2C1 */
#ifdef RT_USING_I2C2
#ifdef RT_USING_I2C2_BITOPS
#endif /* RT_USING_HW_I2C1 */
#else
#ifdef RT_USING_HW_I2C2
static struct rt1052_i2c_bus lpi2c2 =
{
.I2C = LPI2C2,
.device_name = I2C2BUS_NAME,
};
#endif /* RT_USING_I2C2_BITOPS */
#endif /* RT_USING_I2C2 */
#ifdef RT_USING_I2C3
#ifdef RT_USING_I2C3_BITOPS
#endif /* RT_USING_HW_I2C2 */
#else
#ifdef RT_USING_HW_I2C3
static struct rt1052_i2c_bus lpi2c3 =
{
.I2C = LPI2C3,
.device_name = I2C3BUS_NAME,
};
#endif /* RT_USING_HW_I2C3 */
#endif /* RT_USING_I2C3_BITOPS */
#endif /* RT_USING_I2C3 */
#ifdef RT_USING_I2C4
#ifdef RT_USING_I2C4_BITOPS
#else
#ifdef RT_USING_HW_I2C4
static struct rt1052_i2c_bus lpi2c4 =
{
.I2C = LPI2C4,
.device_name = I2C4BUS_NAME,
};
#endif /* RT_USING_I2C1_BITOPS */
#endif /* RT_USING_HW_I2C4 */
#endif /* RT_USING_I2C4 */
#if (defined(RT_USING_I2C1) || defined(RT_USING_I2C2) || \
defined(RT_USING_I2C3) || defined(RT_USING_I2C4))
#if (defined(RT_USING_HW_I2C1) || defined(RT_USING_HW_I2C2) || defined(RT_USING_HW_I2C3) || defined(RT_USING_HW_I2C4))
static rt_size_t imxrt_i2c_mst_xfer(struct rt_i2c_bus_device *bus,
struct rt_i2c_msg msgs[],
......@@ -190,9 +94,6 @@ static const struct rt_i2c_bus_device_ops imxrt_i2c_ops =
imxrt_i2c_bus_control,
};
#if !defined(RT_USING_I2C_BITOPS) || (!defined(RT_USING_I2C1_BITOPS) || !defined(RT_USING_I2C2_BITOPS) || \
!defined(RT_USING_I2C3_BITOPS) || !defined(RT_USING_I2C4_BITOPS))
void imxrt_lpi2c_gpio_init(struct rt1052_i2c_bus *bus)
{
if (bus->I2C == LPI2C1)
......@@ -272,15 +173,85 @@ static rt_err_t imxrt_lpi2c_configure(struct rt1052_i2c_bus *bus, lpi2c_master_c
return RT_EOK;
}
#endif
status_t LPI2C_MasterCheck(LPI2C_Type *base, uint32_t status)
{
status_t result = kStatus_Success;
/* Check for error. These errors cause a stop to automatically be sent. We must */
/* clear the errors before a new transfer can start. */
status &= 0x3c00;
if (status)
{
/* Select the correct error code. Ordered by severity, with bus issues first. */
if (status & kLPI2C_MasterPinLowTimeoutFlag)
{
result = kStatus_LPI2C_PinLowTimeout;
}
else if (status & kLPI2C_MasterArbitrationLostFlag)
{
result = kStatus_LPI2C_ArbitrationLost;
}
else if (status & kLPI2C_MasterNackDetectFlag)
{
result = kStatus_LPI2C_Nak;
}
else if (status & kLPI2C_MasterFifoErrFlag)
{
result = kStatus_LPI2C_FifoError;
}
else
{
assert(false);
}
/* Clear the flags. */
LPI2C_MasterClearStatusFlags(base, status);
/* Reset fifos. These flags clear automatically. */
base->MCR |= LPI2C_MCR_RRF_MASK | LPI2C_MCR_RTF_MASK;
}
return result;
}
/*!
* @brief Wait until the tx fifo all empty.
* @param base The LPI2C peripheral base address.
* @retval #kStatus_Success
* @retval #kStatus_LPI2C_PinLowTimeout
* @retval #kStatus_LPI2C_ArbitrationLost
* @retval #kStatus_LPI2C_Nak
* @retval #kStatus_LPI2C_FifoError
*/
static status_t LPI2C_MasterWaitForTxFifoAllEmpty(LPI2C_Type *base)
{
uint32_t status;
size_t txCount;
do
{
status_t result;
/* Get the number of words in the tx fifo and compute empty slots. */
LPI2C_MasterGetFifoCounts(base, NULL, &txCount);
/* Check for error flags. */
status = LPI2C_MasterGetStatusFlags(base);
result = LPI2C_MasterCheck(base, status);
if (result)
{
return result;
}
}
while (txCount);
return kStatus_Success;
}
static rt_size_t imxrt_i2c_mst_xfer(struct rt_i2c_bus_device *bus,
struct rt_i2c_msg msgs[],
rt_uint32_t num)
{
struct rt1052_i2c_bus *rt1052_i2c;
rt_uint32_t numbak;
rt_uint16_t i;
rt_size_t i;
RT_ASSERT(bus != RT_NULL);
rt1052_i2c = (struct rt1052_i2c_bus *) bus;
......@@ -293,8 +264,22 @@ static rt_size_t imxrt_i2c_mst_xfer(struct rt_i2c_bus_device *bus,
{
if (rt1052_i2c->msg[i].flags & RT_I2C_RD)
{
LPI2C_MasterStart(rt1052_i2c->I2C, rt1052_i2c->msg[i].addr, kLPI2C_Read);
if (LPI2C_MasterReceive(rt1052_i2c->I2C, rt1052_i2c->msg[i].buf, rt1052_i2c->msg[i].len) == kStatus_LPI2C_Nak)
if (LPI2C_MasterStart(rt1052_i2c->I2C, rt1052_i2c->msg[i].addr, kLPI2C_Read) != kStatus_Success)
{
i = 0;
break;
}
if (LPI2C_MasterWaitForTxFifoAllEmpty(rt1052_i2c->I2C) != kStatus_Success)
{
i = 0;
break;
}
if (LPI2C_MasterReceive(rt1052_i2c->I2C, rt1052_i2c->msg[i].buf, rt1052_i2c->msg[i].len) != kStatus_Success)
{
i = 0;
break;
}
if (LPI2C_MasterWaitForTxFifoAllEmpty(rt1052_i2c->I2C) != kStatus_Success)
{
i = 0;
break;
......@@ -302,25 +287,41 @@ static rt_size_t imxrt_i2c_mst_xfer(struct rt_i2c_bus_device *bus,
}
else
{
LPI2C_MasterStart(rt1052_i2c->I2C, rt1052_i2c->msg[i].addr, kLPI2C_Write);
if (LPI2C_MasterSend(rt1052_i2c->I2C, rt1052_i2c->msg[i].buf, rt1052_i2c->msg[i].len) == kStatus_LPI2C_Nak)
if (LPI2C_MasterStart(rt1052_i2c->I2C, rt1052_i2c->msg[i].addr, kLPI2C_Write) != kStatus_Success)
{
i = 0;
break;
}
if (LPI2C_MasterWaitForTxFifoAllEmpty(rt1052_i2c->I2C) != kStatus_Success)
{
i = 0;
break;
}
if (LPI2C_MasterSend(rt1052_i2c->I2C, rt1052_i2c->msg[i].buf, rt1052_i2c->msg[i].len) != kStatus_Success)
{
i = 0;
break;
}
if (LPI2C_MasterWaitForTxFifoAllEmpty(rt1052_i2c->I2C) != kStatus_Success)
{
i = 0;
break;
}
}
}
i2c_dbg("send stop condition\n");
LPI2C_MasterStop(rt1052_i2c->I2C);
if (LPI2C_MasterStop(rt1052_i2c->I2C) != kStatus_Success)
{
i = 0;
}
numbak = i;
rt1052_i2c->msg = RT_NULL;
rt1052_i2c->msg_ptr = 0;
rt1052_i2c->msg_cnt = 0;
rt1052_i2c->dptr = 0;
return numbak;
return i;
}
static rt_size_t imxrt_i2c_slv_xfer(struct rt_i2c_bus_device *bus,
struct rt_i2c_msg msgs[],
rt_uint32_t num)
......@@ -338,207 +339,60 @@ static rt_err_t imxrt_i2c_bus_control(struct rt_i2c_bus_device *bus,
int rt_hw_i2c_init(void)
{
#if !defined(RT_USING_I2C_BITOPS) || (!defined(RT_USING_I2C1_BITOPS) || !defined(RT_USING_I2C2_BITOPS) || \
!defined(RT_USING_I2C3_BITOPS) || !defined(RT_USING_I2C4_BITOPS))
#if (defined(RT_USING_HW_I2C1) || defined(RT_USING_HW_I2C2) || defined(RT_USING_HW_I2C3) || defined(RT_USING_HW_I2C4))
lpi2c_master_config_t masterConfig = {0};
/*Clock setting for LPI2C*/
CLOCK_SetMux(kCLOCK_Lpi2cMux, 0);
CLOCK_SetDiv(kCLOCK_Lpi2cDiv, LPI2C_CLOCK_SOURCE_DIVIDER);
CLOCK_SetDiv(kCLOCK_Lpi2cDiv, LPI2C_CLOCK_SOURCE_DIVIDER - 1);
#endif
#if defined(RT_USING_I2C_BITOPS) && (defined(RT_USING_I2C1_BITOPS) || defined(RT_USING_I2C2_BITOPS) || \
defined(RT_USING_I2C3_BITOPS) || defined(RT_USING_I2C4_BITOPS))
gpio_pin_config_t pin_config =
{
kGPIO_DigitalOutput,
0,
};
#endif /* RT_USING_I2C_BITOPS= RT_USING_I2C1_BITOPS RT_USING_I2C2_BITOPS RT_USING_I2C3_BITOPS RT_USING_I2C4_BITOPS */
#if defined(RT_USING_I2C1) && defined(RT_USING_I2C1_BITOPS)
static struct rt_i2c_bus_device i2c1_device;
static const struct rt1052_i2c_bit_data _i2c1_bdata =
{
/* SCL */ {GPIO1, 16},
/* SDA */ {GPIO1, 17},
};
static const struct rt_i2c_bit_ops _i2c1_bit_ops =
{
(void *) &_i2c1_bdata,
gpio_set_sda,
gpio_set_scl,
gpio_get_sda,
gpio_get_scl,
gpio_udelay,
50,
1000
};
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_00_GPIO1_IO16, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_00_GPIO1_IO16, 0xD8B0u);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_01_GPIO1_IO17, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_01_GPIO1_IO17, 0xD8B0u);
/* Enable touch panel controller */
GPIO_PinInit(_i2c1_bdata.sda.base, _i2c1_bdata.sda.pin, &pin_config);
GPIO_PinInit(_i2c1_bdata.scl.base, _i2c1_bdata.scl.pin, &pin_config);
GPIO_PortSet(_i2c1_bdata.sda.base, _i2c1_bdata.sda.pin);
GPIO_PortSet(_i2c1_bdata.scl.base, _i2c1_bdata.scl.pin);
i2c1_device.priv = (void *) &_i2c1_bit_ops;
rt_i2c_bit_add_bus(&i2c1_device, I2C1BUS_NAME);
#elif defined(RT_USING_I2C1) && !defined(RT_USING_I2C1_BITOPS)
#if defined(RT_USING_HW_I2C1)
LPI2C_MasterGetDefaultConfig(&masterConfig);
#if defined(HW_I2C1_BADURATE_400kHZ)
masterConfig.baudRate_Hz = 400000U;
#elif defined(HW_I2C1_BADURATE_100kHZ)
masterConfig.baudRate_Hz = 100000U;
#endif
imxrt_lpi2c_configure(&lpi2c1, &masterConfig);
rt_i2c_bus_device_register(&lpi2c1.parent, lpi2c1.device_name);
#endif
#if defined(RT_USING_I2C2) && defined(RT_USING_I2C2_BITOPS)
static struct rt_i2c_bus_device i2c2_device;
static const struct rt1052_i2c_bit_data _i2c2_bdata =
{
/* SCL */ {GPIO2, 4},
/* SDA */ {GPIO2, 5},
};
static const struct rt_i2c_bit_ops _i2c2_bit_ops =
{
(void *) &_i2c2_bdata,
gpio_set_sda,
gpio_set_scl,
gpio_get_sda,
gpio_get_scl,
gpio_udelay,
50,
1000
};
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_04_GPIO2_IO04, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_04_GPIO2_IO04, 0xD8B0u);
IOMUXC_SetPinMux(IOMUXC_GPIO_B0_05_GPIO2_IO05, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_B0_05_GPIO2_IO05, 0xD8B0u);
/* Enable touch panel controller */
GPIO_PinInit(_i2c2_bdata.sda.base, _i2c2_bdata.sda.pin, &pin_config);
GPIO_PinInit(_i2c2_bdata.scl.base, _i2c2_bdata.scl.pin, &pin_config);
GPIO_PortSet(_i2c2_bdata.sda.base, _i2c2_bdata.sda.pin);
GPIO_PortSet(_i2c2_bdata.scl.base, _i2c2_bdata.scl.pin);
i2c2_device.priv = (void *) &_i2c2_bit_ops;
rt_i2c_bit_add_bus(&i2c2_device, I2C2BUS_NAME);
#elif defined(RT_USING_I2C2) && !defined(RT_USING_I2C2_BITOPS)
#if defined(RT_USING_HW_I2C2)
LPI2C_MasterGetDefaultConfig(&masterConfig);
#if defined(HW_I2C2_BADURATE_400kHZ)
masterConfig.baudRate_Hz = 400000U;
#elif defined(HW_I2C2_BADURATE_100kHZ)
masterConfig.baudRate_Hz = 100000U;
#endif
imxrt_lpi2c_configure(&lpi2c2, &masterConfig);
rt_i2c_bus_device_register(&lpi2c2.parent, lpi2c2.device_name);
#endif
#if defined(RT_USING_I2C3) && defined(RT_USING_I2C3_BITOPS)
static struct rt_i2c_bus_device i2c3_device;
static const struct rt1052_i2c_bit_data _i2c3_bdata =
{
/* SCL */ {GPIO1, 23},
/* SDA */ {GPIO1, 22},
};
static const struct rt_i2c_bit_ops _i2c3_bit_ops =
{
(void *) &_i2c3_bdata,
gpio_set_sda,
gpio_set_scl,
gpio_get_sda,
gpio_get_scl,
gpio_udelay,
50,
1000
};
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_07_GPIO1_IO23, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_07_GPIO1_IO23, 0xD8B0u);
IOMUXC_SetPinMux(IOMUXC_GPIO_AD_B1_06_GPIO1_IO22, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_AD_B1_06_GPIO1_IO22, 0xD8B0u);
/* Enable touch panel controller */
GPIO_PinInit(_i2c3_bdata.sda.base, _i2c3_bdata.sda.pin, &pin_config);
GPIO_PinInit(_i2c3_bdata.scl.base, _i2c3_bdata.scl.pin, &pin_config);
GPIO_PortSet(_i2c3_bdata.sda.base, _i2c3_bdata.sda.pin);
GPIO_PortSet(_i2c3_bdata.scl.base, _i2c3_bdata.scl.pin);
i2c3_device.priv = (void *) &_i2c3_bit_ops;
rt_i2c_bit_add_bus(&i2c3_device, I2C3BUS_NAME);
#elif defined(RT_USING_I2C3) && !defined(RT_USING_I2C3_BITOPS)
#if defined(RT_USING_HW_I2C3)
LPI2C_MasterGetDefaultConfig(&masterConfig);
#if defined(HW_I2C3_BADURATE_400kHZ)
masterConfig.baudRate_Hz = 400000U;
#elif defined(HW_I2C3_BADURATE_100kHZ)
masterConfig.baudRate_Hz = 100000U;
#endif
imxrt_lpi2c_configure(&lpi2c3, &masterConfig);
rt_i2c_bus_device_register(&lpi2c3.parent, lpi2c3.device_name);
#endif
#if defined(RT_USING_I2C4) && defined(RT_USING_I2C4_BITOPS)
static struct rt_i2c_bus_device i2c4_device;
static const struct rt1052_i2c_bit_data _i2c4_bdata =
{
/* SCL */ {GPIO4, 12},
/* SDA */ {GPIO4, 11},
};
static const struct rt_i2c_bit_ops _i2c4_bit_ops =
{
(void *) &_i2c4_bdata,
gpio_set_sda,
gpio_set_scl,
gpio_get_sda,
gpio_get_scl,
gpio_udelay,
50,
1000
};
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_12_GPIO4_IO12, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_12_GPIO4_IO12, 0xD8B0u);
IOMUXC_SetPinMux(IOMUXC_GPIO_EMC_11_GPIO4_IO11, 1U);
IOMUXC_SetPinConfig(IOMUXC_GPIO_EMC_11_GPIO4_IO11, 0xD8B0u);
/* Enable touch panel controller */
GPIO_PinInit(_i2c4_bdata.sda.base, _i2c4_bdata.sda.pin, &pin_config);
GPIO_PinInit(_i2c4_bdata.scl.base, _i2c4_bdata.scl.pin, &pin_config);
GPIO_PortSet(_i2c4_bdata.sda.base, _i2c4_bdata.sda.pin);
GPIO_PortSet(_i2c4_bdata.scl.base, _i2c4_bdata.scl.pin);
i2c4_device.priv = (void *) &_i2c4_bit_ops;
rt_i2c_bit_add_bus(&i2c4_device, I2C4BUS_NAME);
#elif defined(RT_USING_I2C4) && !defined(RT_USING_I2C4_BITOPS)
#if defined(RT_USING_HW_I2C4)
LPI2C_MasterGetDefaultConfig(&masterConfig);
#if defined(HW_I2C4_BADURATE_400kHZ)
masterConfig.baudRate_Hz = 400000U;
#elif defined(HW_I2C4_BADURATE_100kHZ)
masterConfig.baudRate_Hz = 100000U;
#endif
imxrt_lpi2c_configure(&lpi2c4, &masterConfig);
rt_i2c_bus_device_register(&lpi2c4.parent, lpi2c4.device_name);
#endif
return 0;
}
INIT_DEVICE_EXPORT(rt_hw_i2c_init);
......@@ -602,6 +456,7 @@ static void _search_i2c_device(rt_device_t dev, uint8_t cmd)
static int i2c_test(const char *name, uint8_t cmd)
{
rt_device_t dev = _i2c_find(name);
if (dev == RT_NULL)
{
rt_kprintf("search i2c device faild\n");
......@@ -609,14 +464,12 @@ static int i2c_test(const char *name, uint8_t cmd)
}
_search_i2c_device(dev, cmd);
rt_device_close(dev);
return 0;
}
FINSH_FUNCTION_EXPORT(i2c_test, e.g: i2c_test("i2c1", 0xA3));
#endif
#endif /* RT_USING_I2C */
bsp/imxrt1052-evk/drivers/drv_pin.c
浏览文件 @ 071c2d3f
......@@ -392,7 +392,6 @@ void GPIO5_Combined_0_15_IRQHandler(void)
#if defined __CORTEX_M && (__CORTEX_M == 4U)
__DSB();
#endif
rt_interrupt_leave();
}
......@@ -473,13 +472,13 @@ static void rt1052_pin_mode(rt_device_t dev, rt_base_t pin, rt_base_t mode)
{
CLOCK_EnableClock(kCLOCK_Iomuxc);
IOMUXC_SetPinMux(0x401F8010U + pin*4, 0x5U, 0, 0, 0, 0);
IOMUXC_SetPinMux(0x401F8010U + pin*4, 0x5U, 0, 0, 0, 1);
}
else
{
CLOCK_EnableClock(kCLOCK_IomuxcSnvs);
IOMUXC_SetPinMux(0x401F8000U + (pin-125)*4, 0x5U, 0, 0, 0, 0);
IOMUXC_SetPinMux(0x401F8000U + (pin-125)*4, 0x5U, 0, 0, 0, 1);
}
gpio.outputLogic = 0;
......@@ -530,7 +529,7 @@ static void rt1052_pin_mode(rt_device_t dev, rt_base_t pin, rt_base_t mode)
static int rt1052_pin_read(rt_device_t dev, rt_base_t pin)
{
return GPIO_PinRead(rt1052_pin_map[pin].gpio, rt1052_pin_map[pin].gpio_pin);
return GPIO_PinReadPadStatus(rt1052_pin_map[pin].gpio, rt1052_pin_map[pin].gpio_pin);
}
static void rt1052_pin_write(rt_device_t dev, rt_base_t pin, rt_base_t value)
......
bsp/imxrt1052-evk/rtconfig.h
浏览文件 @ 071c2d3f
......@@ -210,10 +210,10 @@
#define LPSPI4_SDO_GPIO_1
#define LPSPI4_SDI_GPIO_1
/* Select i2c bus drivers */
/* Select iic bus drivers */
#define LPI2C_CLOCK_SOURCE_DIVIDER 4
#define RT_USING_I2C1
#define RT_USING_HW_I2C1
#define HW_I2C1_BADURATE_100kHZ
/* Select lcd driver */
......
Markdown is supported
0% 或 .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑！
想要评论请 注册 或