Fixes: out of array access
Fixes: 12447/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HYMT_fuzzer-5201623956062208
Fixes: 12458/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_HYMT_fuzzer-5705567736168448

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: NMichael Niedermayer <michael@niedermayer.cc>

The addition is moved up into the context where the variable is unsigned avoiding
the undefined behavior

Fixes: runtime error: signed integer overflow: 2147481972 + 4096 cannot be represented in type 'int'
Fixes: 12444/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_ILBC_fuzzer-5755706244857856

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: NMichael Niedermayer <michael@niedermayer.cc>

webrtc contains explicit code to ignore the undefined behavior (RTC_NO_SANITIZE / OverflowingAddS32S32ToS32())

Probably fixes: Integer overflow (unreproducable here)
Probably fixes: 12215/clusterfuzz-testcase-minimized-ffmpeg_AV_CODEC_ID_ILBC_fuzzer-5767142427852800

Found-by: continuous fuzzing process https://github.com/google/oss-fuzz/tree/master/projects/ffmpegSigned-off-by: NMichael Niedermayer <michael@niedermayer.cc>

Signed-off-by: Nhwren <hwrenx@126.com>
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

When making a new P-frame when B-frames are present the previous P-frame
is normally in the DPB because it will be referred to by subsequent
B-frames.  However, this is not true if there are no B-frames, or in edge
cases where a GOP ends with two P-frames.  Fix this by adding the direct
ref pics to the RPS explicitly.

Fixes #7699.
Tested-by: NUllysses A Eoff <ullysses.a.eoff@intel.com>

Fixes ticket #7661.

The timestamp of the changed input frame as well as its relevant
properties can be examined by the user. Only applicable when
reinit_filter is disabled on the input stream.

The specification requires the demuxer to only read the data
atom up to its given size, this is necessary as atoms are
allowed at the end of the file.
This patch duplicates the behaviour of the QuickTime player.

Thanks Kostya for great help in reversing binary.

The VP3/4/5/6 reference decoders all use three IDCT versions: one for the
DC-only case, another for blocks with more than 10 coefficients, and an
optimised one for blocks with up to 10 AC coefficents. VP6 relies on the
sparse 10 coefficient version, and without it, IDCT drift occurs.

Fixes: https://trac.ffmpeg.org/ticket/1282Signed-off-by: NPeter Ross <pross@xvid.org>

Partially fixes: https://trac.ffmpeg.org/ticket/1282Signed-off-by: NPeter Ross <pross@xvid.org>

Partially fixes: https://trac.ffmpeg.org/ticket/1282Signed-off-by: NPeter Ross <pross@xvid.org>

This version of the IDCT is used by the VP6 decoder.
Signed-off-by: NPeter Ross <pross@xvid.org>

Signed-off-by: NPeter Ross <pross@xvid.org>

This is also used by the VP6 decoder.
Signed-off-by: NPeter Ross <pross@xvid.org>

Reviewed-by: NMark Thompson <sw@jkqxz.net>
Signed-off-by: NFuwei Tang <fuweix.tang@intel.com>
Signed-off-by: NZhong Li <zhong.li@intel.com>

QVBR mode is to use the variable bitrate control algorithm
with constant quality.
mfxExtCodingOption3 should be supported to enable QVBR mode.

It is neccesary to specify a max_rate for QVBR, else it may be ICQ mode.
Example usage: ffmpeg -hwaccel qsv -c:v h264_qsv -i input.mp4 -c:v
h264_qsv -global_quality 25 -maxrate 2M test_qvbr.mp4 -v verbose

Clip QVBR quality range to be [0, 51] as Mark's commments.
It is similar to qp range of CQP but possibly should be updated when VP8/VP9
encoding can be supported.
Reviewed-by: NMark Thompson <sw@jkqxz.net>
Signed-off-by: NZhong Li <zhong.li@intel.com>

New fade curve value 'nofade' passes audio samples as-is.
Primarily useful in carrying out acrossfade without fades.

Signed-off-by: Guo, Yejun <yejun.guo@intel.com>
Signed-off-by: NDerek Buitenhuis <derek.buitenhuis@gmail.com>

Smarter improvements for this error message were suggested in the past
but this is certainly an improvement.

Swap width and height when do clock/cclock rotation
Add reversal/hflip/vflip options

ffmpeg -hwaccel vaapi -vaapi_device /dev/dri/renderD128
-hwaccel_output_format vaapi -i input.264 -vf "transpose_vaapi=clock_flip"
-c:v h264_vaapi output.h264
Signed-off-by: NZachary Zhou <zachary.zhou@intel.com>
Signed-off-by: NMark Thompson <sw@jkqxz.net>

The reference picture sets are now constructed directly from the DPB
information.

No supported encode driver requires the pool to be fixed-size, so just
remove this constraint.

This attaches the logic of picking the mode of for the next picture to
the output, which simplifies some choices by removing the concept of
the picture for which input is not yet available.  At the same time,
we allow more complex reference structures and track more reference
metadata (particularly the contents of the DPB) for use in the
codec-specific code.

It also adds flags to explicitly track the available features of the
different codecs.  The new structure also allows open-GOP support, so
that is now available for codecs which can do it.

Now memcpy can be avoided for NAL units containing escapes, too.

Particularly improves performance for files with hardcoded black bars.
For such a file, time spent in cbs_h2645_split_fragment went down from
369410 decicycles to 327677 decicycles. (It were 379114 decicycles when
every NAL unit was copied.)
Signed-off-by: NAndreas Rheinhardt <andreas.rheinhardt@googlemail.com>

This is in preparation for a patch for cbs_h2645. Now the packet's
rbsp_buffer can be owned by an AVBuffer.
Signed-off-by: NAndreas Rheinhardt <andreas.rheinhardt@googlemail.com>

Signed-off-by: NLou Logan <lou@lrcd.com>
Signed-off-by: NKieran O Leary <kieran.o.leary@gmail.com>

This allows the underlying files to change their duration on subsequent
avformat context opens.

An example use case where this matters:

ffconcat version 1.0
file dummy.mxf
file dummy.mxf

ffmpeg -re -stream_loop -1 -i dummy.ffconcat -f sdl2 none

The user can seamlessly change the input by atomically replacing dummy.mxf.

v2: Set ConcatFile duration in read_header for all segments with known
durations because from now on we always recalculate the start time in
open_file, and an instant seek could have caused unset ConcatFile durations.
Signed-off-by: NMarton Balint <cus@passwd.hu>

Signed-off-by: NMarton Balint <cus@passwd.hu>

Signed-off-by: NMarton Balint <cus@passwd.hu>

Fix ticket #7663
Reviewed-by: NCarl Eugen Hoyos <ceffmpeg@gmail.com>
Reviewed-by: NHendrik Leppkes <h.leppkes@gmail.com>
Signed-off-by: NZhong Li <zhong.li@intel.com>

Optimize put_hevc_qpel_bi_hv_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 11.4%(2.01x to 2.24x, tested on loongson 3A3000).
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

Optimize put_hevc_qpel_hv_8 with mmi in the case width=4/8/12/16/24/32/48/64.
This optimization improved HEVC decoding performance 11%(1.81x to 2.01x, tested on loongson 3A3000).
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>

The compiled libavcodec/tests/codec_desc was left out of that dir's
.gitignore when the test was added, so it shows up in 'git status'
as an untracked file if it's been built.
Signed-off-by: NFeRD (Frank Dana) <ferdnyc@gmail.com>
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>