- 18 8月, 2015 20 次提交
-
-
由 Ronald S. Bultje 提交于
-
由 Michael Niedermayer 提交于
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>
-
由 Michael Niedermayer 提交于
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>
-
由 Ronald S. Bultje 提交于
-
由 Arttu Ylä-Outinen 提交于
Signed-off-by: NArttu Ylä-Outinen <arttu.yla-outinen@tut.fi> Liked-by: Nwm4 <nfxjfg@googlemail.com> Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>
-
由 Hendrik Leppkes 提交于
* commit '317cfaa5': asfdec: prevent the memory leak in the asf_read_metada_obj Merged-by: NHendrik Leppkes <h.leppkes@gmail.com>
-
由 Hendrik Leppkes 提交于
* commit '58c3720a': fate: Make sure a corner-case for ASF is covered Adjusted fate ref to match the different timebase of the ffasf demuxer Merged-by: NHendrik Leppkes <h.leppkes@gmail.com>
-
由 Hendrik Leppkes 提交于
* commit '72839fce': hlsenc: Use AV_TIME_BASE units for all the computations Not merged, duration/time computation is handled quite differently in ffmpeg's hlsenc Merged-by: NHendrik Leppkes <h.leppkes@gmail.com>
-
由 Hendrik Leppkes 提交于
* commit '7bf96472': vp7: bound checking in vp7_decode_frame_header Only partially merged, see 46f72ea5Merged-by: NHendrik Leppkes <h.leppkes@gmail.com>
-
由 Hendrik Leppkes 提交于
* commit 'f34b152e': libfdk-aacdec: Clean up properly if the init fails Merged-by: NHendrik Leppkes <h.leppkes@gmail.com>
-
由 Hendrik Leppkes 提交于
* commit '1b90433f': libfdk-aacdec: Always decode into an intermediate buffer Conflicts: libavcodec/libfdk-aacdec.c Merged-by: NHendrik Leppkes <h.leppkes@gmail.com>
-
由 Hendrik Leppkes 提交于
* commit '87de6ddb': libfdk-aacdec: Bump the max number of channels to 8 Merged-by: NHendrik Leppkes <h.leppkes@gmail.com>
-
由 Hendrik Leppkes 提交于
* commit 'cb2dbe2c': configure: arm: Assume softfp ABI on darwin Merged-by: NHendrik Leppkes <h.leppkes@gmail.com>
-
由 Hendrik Leppkes 提交于
* commit '44b44441': x86inc: Various minor backports from x264 Merged-by: NHendrik Leppkes <h.leppkes@gmail.com>
-
由 Hendrik Leppkes 提交于
* commit '26ac22e5': movenc: Add a new flag for writing global sidx indexes for dash Conflicts: libavformat/movenc.c libavformat/movenc.h Merged-by: NHendrik Leppkes <h.leppkes@gmail.com>
-
由 Pedro Arthur 提交于
Process more lines in a single pass to improve performance Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>
-
由 Pedro Arthur 提交于
+ split color conversion from scaling - disabled gamma correction, until it's refactored too Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>
-
由 Ronald S. Bultje 提交于
This improves results after FF_API_LAVF_BITEXACT=0. It still doesn't pass, because of mov rtphint track which I don't understand (yet).
-
由 Ronald S. Bultje 提交于
They picked up defaults, which changes from 128 to 200 when we remove FF_API_OLD_AVOPTIONS.
-
由 Ronald S. Bultje 提交于
Fixes associated fate tests when FF_API_MV0=0.
-
- 17 8月, 2015 11 次提交
-
-
由 Michael Niedermayer 提交于
This filter can be used to scale one stream to match another or based on another, useful to scale subtitles or other things to be overlayed Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>
-
由 Carl Eugen Hoyos 提交于
Fixes ticket #4772.
-
由 Michael Niedermayer 提交于
Found-by: NPedro Arthur <bygrandao@gmail.com> Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>
-
由 Michael Niedermayer 提交于
Fixes part of Ticket1388 Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>
-
由 Philip Langdale 提交于
The h264 decoder reports 4.1 as its maximum level, but it will decode 5.1 4K video just fine. In practice, the published level limits in vdpau do not communicate anything that's actually useful.
-
由 Andreas Cadhalpun 提交于
Use sizeof(void *) as its value, because AVFilterBufferRef is deprecated. Reviewed-by: NMichael Niedermayer <michael@niedermayer.cc> Signed-off-by: NAndreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
-
由 Alexandra Hájková 提交于
also do not return the error code but just break reading metadata object in the case of the aspect ratio reading failure Signed-off-by: NLuca Barbato <lu_zero@gentoo.org>
-
由 Alexandra Hájková 提交于
Test the demuxer for the case when the replicated data length in a sample is 0. Sample-ID: https://samples.libav.org/mplayer-bugs/bug821/bug821-2.asfSigned-off-by: NLuca Barbato <lu_zero@gentoo.org>
-
由 Luca Barbato 提交于
Do not risk mixing different timebases. CC: libav-stable@libav.org Signed-off-by: NLuca Barbato <lu_zero@gentoo.org>
-
由 Federico Tomassetti 提交于
CC: libav-stable@libav.org
-
由 Andreas Cadhalpun 提交于
Reviewed-by: NMichael Niedermayer <michael@niedermayer.cc> Signed-off-by: NAndreas Cadhalpun <Andreas.Cadhalpun@googlemail.com>
-
- 16 8月, 2015 8 次提交
-
-
由 Michael Niedermayer 提交于
Similar to the pixel format code Fixes Ticket3847 Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>
-
由 Rodger Combs 提交于
Fixes https://trac.ffmpeg.org/ticket/4776Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>
-
由 Michael Niedermayer 提交于
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>
-
由 Mariusz Szczepańczyk 提交于
Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>
-
由 Martin Storsjö 提交于
Previously most of the error paths leaked. Also add FF_CODEC_CAP_INIT_THREADSAFE while adding caps_internal; this decoder wrapper doesn't have any static data that is initialized. Signed-off-by: NMartin Storsjö <martin@martin.st>
-
由 Martin Storsjö 提交于
For ADTS streams, the output format (number of channels, frame size) can change at any point (with the latest version of fdk-aac, the decoder seems to change format after a handful of frames, not outputting the right format immediately, for cases that worked fine with the earlier version of the lib). Previously, the decoder decoded straight into the output frame once the number of channels and frame size was known. This obviously does not work if the number of channels or frame size changes. The alternative would be to allocate the AVFrame with the maximum number of channels and frame size, and change them afterward decoding into it, but that may cause confusion to users e.g. of the get_buffer callback. This solution should be more robust. CC: libav-stable@libav.org Signed-off-by: NMartin Storsjö <martin@martin.st>
-
由 Martin Storsjö 提交于
In the latest version of fdk-aac, the decoder can output up to 8 channels; take this into account when preallocating buffers that need to fit the output from any packet. CC: libav-stable@libav.org Signed-off-by: NMartin Storsjö <martin@martin.st>
-
由 Martin Storsjö 提交于
Don't try to detect the float ABI by checking at the toolchain name or by trying to assemble and link files with eabi_attributes. This fixes the float ABI detection when building using clang with -fembed-bitcode, where the current eabi_attributes check accidentally passes. This issue was pointed out by James Howe <james.howe@hp.com>. CC: libav-stable@libav.org Signed-off-by: NMartin Storsjö <martin@martin.st>
-
- 15 8月, 2015 1 次提交
-
-
由 Michael Niedermayer 提交于
Fixes Ticket4744 part3 Signed-off-by: NMichael Niedermayer <michael@niedermayer.cc>
-