提交 320d060a 编写于 作者: D Diego Biurrun

On MinGW it is not possible to build shared and static libraries at once.

Add means to disable building the static libraries and fix a few issues
with the MinGW build.
All the hard work done by Alexander Strasser, minor changes by myself.

Originally committed as revision 4909 to svn://svn.ffmpeg.org/ffmpeg/trunk
上级 53862e0f
......@@ -31,7 +31,10 @@ echo " --enable-a52 enable GPLed A52 support [default=no]"
echo " --enable-a52bin open liba52.so.0 at runtime [default=no]"
echo " --enable-dts enable GPLed DTS support [default=no]"
echo " --enable-pp enable GPLed postprocessing support [default=no]"
echo " --enable-static build static libraries [default=yes]"
echo " --disable-static do not build static libraries [default=no]"
echo " --enable-shared build shared libraries [default=no]"
echo " --disable-shared do not build shared libraries [default=yes]"
echo " --enable-amr_nb enable amr_nb float audio codec"
echo " --enable-amr_nb-fixed use fixed point for amr-nb codec"
echo " --enable-amr_wb enable amr_wb float audio codec"
......@@ -206,6 +209,7 @@ mingw32="no"
mingwce="no"
cygwin="no"
os2="no"
lstatic="yes"
lshared="no"
optimize="yes"
debug="yes"
......@@ -549,8 +553,14 @@ for opt do
;;
--enable-mingwce) mingwce="yes"
;;
--enable-static) lstatic="yes"
;;
--disable-static) lstatic="no"
;;
--enable-shared) lshared="yes"
;;
--disable-shared) lshared="no"
;;
--disable-debug) debug="no"
;;
--disable-opts) optimize="no"
......@@ -607,6 +617,17 @@ for opt do
esac
done
# we need to build at least one lib type
if test "$lstatic" = "no" && test "$lshared" = "no" ; then
cat <<EOF
At least one library type must be built.
Specify --enable-static to build the static libraries or --enable-shared to
build the shared libraries as well. To only build the shared libraries specify
--disable-static in addition to --enable-shared.
EOF
exit 1;
fi
if test "$theora" = "yes" ; then
if test "$libogg" = "no"; then
echo "libogg must be enabled to enable Theora."
......@@ -869,6 +890,15 @@ $cc -o $TMPE $TMPC 2> /dev/null || mmi="no"
fi
if test "$mingw32" = "yes" -o "$mingwce" = "yes"; then
if test "$lshared" = "yes" && test "$lstatic" = "yes" ; then
cat <<EOF
You can only build one library type at once on MinGW.
Specify --disable-static --enable-shared to only build
the shared libraries. To build only the static libraries
you don't need to pass additional options.
EOF
exit 1
fi
v4l="no"
bktr="no"
audio_oss="no"
......@@ -1296,6 +1326,7 @@ echo "pp support $pp"
echo "debug symbols $debug"
echo "strip symbols $dostrip"
echo "optimize $optimize"
echo "static $lstatic"
echo "shared $lshared"
echo "video hooking $vhook"
echo "SDL support $sdl"
......@@ -1364,7 +1395,9 @@ echo "LIBOBJFLAGS=$LIBOBJFLAGS" >> config.mak
echo "BUILDSUF=$BUILDSUF" >> config.mak
echo "LIBPREF=$LIBPREF" >> config.mak
echo "LIBSUF=\${BUILDSUF}$LIBSUF" >> config.mak
echo "LIB=$LIB" >> config.mak
if test "$lstatic" = "yes" ; then
echo "LIB=$LIB" >> config.mak
fi
echo "SLIBPREF=$SLIBPREF" >> config.mak
echo "SLIBSUF=\${BUILDSUF}$SLIBSUF" >> config.mak
echo "EXESUF=\${BUILDSUF}$EXESUF" >> config.mak
......@@ -1508,6 +1541,7 @@ lavu_version=`grep '#define LIBAVUTIL_VERSION ' "$source_path/libavutil/avutil.h
if test "$lshared" = "yes" ; then
echo "#define BUILD_SHARED_AV 1" >> $TMPH
echo "BUILD_SHARED=yes" >> config.mak
echo "PIC=-fPIC -DPIC" >> config.mak
echo "SPPMAJOR=${lavc_version%%.*}" >> config.mak
......
......@@ -11,7 +11,7 @@ CFLAGS=$(OPTFLAGS) -DHAVE_AV_CONFIG_H -I.. -I$(SRC_PATH)/libavutil -D_FILE_OFFSE
#FIXME: This should be in configure/config.mak
ifeq ($(CONFIG_WIN32),yes)
LDFLAGS=-Wl,--output-def,$(@:.dll=.def)
LDFLAGS=-Wl,--output-def,$(@:.dll=.def),--out-implib,lib$(SLIBNAME:$(SLIBSUF)=.dll.a)
endif
OBJS= bitstream.o utils.o mem.o allcodecs.o \
......@@ -449,6 +449,7 @@ dep: depend
clean: $(CLEANAMR)
rm -f *.o *.d *~ *.a *.lib *.so *.dylib *.dll \
*.dll.a *.def *.exp \
i386/*.o i386/*~ \
armv4l/*.o armv4l/*~ \
mlib/*.o mlib/*~ \
......
......@@ -10,7 +10,7 @@ CFLAGS=$(OPTFLAGS) -I.. -I$(SRC_PATH) -I$(SRC_PATH)/libavutil -I$(SRC_PATH)/liba
#FIXME: This should be in configure/config.mak
ifeq ($(CONFIG_WIN32),yes)
LDFLAGS=-Wl,--output-def,$(@:.dll=.def)
LDFLAGS=-Wl,--output-def,$(@:.dll=.def),--out-implib,lib$(SLIBNAME:$(SLIBSUF)=.dll.a)
endif
OBJS= utils.o cutils.o os_support.o allformats.o
......@@ -157,7 +157,8 @@ install-headers:
g++ $(subst -Wall,,$(CFLAGS)) -c -o $@ $<
clean:
rm -f *.o *.d *~ *.a *.lib *.so *.dylib *.dll
rm -f *.o *.d *~ *.a *.lib *.so *.dylib *.dll \
*.lib *.def *.dll.a *.exp
distclean: clean
rm -f .depend
......
......@@ -6,11 +6,11 @@ include ../config.mak
VPATH=$(SRC_PATH)/libavutil
# NOTE: -I.. is needed to include config.h
CFLAGS=$(OPTFLAGS) -DHAVE_AV_CONFIG_H -I.. -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_GNU_SOURCE
CFLAGS=$(OPTFLAGS) -DHAVE_AV_CONFIG_H -DBUILD_AVUTIL -I.. -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE -D_GNU_SOURCE
#FIXME: This should be in configure/config.mak
ifeq ($(CONFIG_WIN32),yes)
LDFLAGS=-Wl,--output-def,$(@:.dll=.def)
LDFLAGS=-Wl,--output-def,$(@:.dll=.def),--out-implib,lib$(SLIBNAME:$(SLIBSUF)=.dll.a)
endif
OBJS= mathematics.o \
......@@ -53,7 +53,8 @@ depend: $(SRCS)
dep: depend
clean:
rm -f *.o *.d *~ *.a *.lib *.so *.dylib *.dll
rm -f *.o *.d *~ *.a *.lib *.so *.dylib *.dll \
*.lib *.def *.dll.a *.exp
distclean: clean
rm -f .depend
......
......@@ -247,6 +247,13 @@ static inline float floorf(float f) {
#ifdef HAVE_AV_CONFIG_H
#if defined(__MINGW32__) && !defined(BUILD_AVUTIL) && defined(BUILD_SHARED_AV)
# define FF_IMPORT_ATTR __declspec(dllimport)
#else
# define FF_IMPORT_ATTR
#endif
# include "bswap.h"
// Use rip-relative addressing if compiling PIC code on x86-64.
......@@ -345,7 +352,7 @@ void print_stats(void);
#endif
/* misc math functions */
extern const uint8_t ff_log2_tab[256];
extern FF_IMPORT_ATTR const uint8_t ff_log2_tab[256];
static inline int av_log2(unsigned int v)
{
......@@ -423,7 +430,7 @@ static inline int clip_uint8(int a)
}
/* math */
extern const uint8_t ff_sqrt_tab[128];
extern FF_IMPORT_ATTR const uint8_t ff_sqrt_tab[128];
int64_t ff_gcd(int64_t a, int64_t b);
......
Markdown is supported
0% .
You are about to add 0 people to the discussion. Proceed with caution.
先完成此消息的编辑!
想要评论请 注册