Per user context, work with CQE version that both the user-space
and the kernel support. Report this CQE version via the response of
the alloc_ucontext command.
Signed-off-by: NHaggai Abramovsky <hagaya@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Enforce working with CQE version 1 when the user supports CQE
version 1 and asked to work this way.

If the user still works with CQE version 0, then use the default
CQE version to tell the Firmware that the user still works in the
older mode.

After this patch, the kernel still reports CQE version 0.
Signed-off-by: NHaggai Abramovsky <hagaya@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The wrong buffer size was passed to ib_is_udata_cleared.
Signed-off-by: NHaggai Abramovsky <hagaya@mellanox.com>
Reviewed-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The rdma netlink local service registers a handler to handle RESOLVE
response and another handler to handle SET_TIMEOUT request. The first
thing these handlers do is to call netlink_capable() to check the
access right of the received skb to make sure that the sender has root
access. Under normal conditions, such responses and requests will be
directly forwarded to the handlers without going through the netlink_dump
pathway (see ibnl_rcv_msg() in drivers/infiniband/core/netlink.c).
However, a user application could send a RESOLVE request (not response)
to the local service, which will fall into the netlink_dump pathway,
where a new skb will be created without initializing the control block.
This new skb will be eventually forwarded to the local service RESOLVE
response handler. Unfortunately, netlink_capable() will cause general
protection fault if the skb's control block is not initialized. This
patch will address the problem by checking the skb first.
Signed-off-by: NKaike Wan <kaike.wan@intel.com>
Reported-by: NDmitry Vyukov <dvyukov@google.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

No usage after the conversion to the new CQ API.
Signed-off-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Based on profiling, UD performance drops in case of processes
in a single client due to excess context switches when
the progress workqueue is scheduled.

This is solved by modifying the heuristic to select the
direct progress instead of the scheduling progress via
the workqueue when UD-like situations are detected in
the heuristic.
Reviewed-by: NVinit Agnihotri <vinit.abhay.agnihotri@intel.com>
Signed-off-by: NMike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Advertise RoCE v2 support in port_immutable attributes according to
the hardware's capabilities. This enables the verbs stack to use
RoCE v2 mode.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The mlx4 driver uses a special QP to implement the GSI QP. This kind
of QP allows to build the InfiniBand headers in software.
When mlx4 hardware builds the packet, it calculates the ICRC and puts
it at the end of the payload. However, this ICRC calculation depends
on the QP configuration, which is determined when the QP is modified
(roce_mode during INIT->RTR).
When receiving a packet, the ICRC verification doesn't depend on this
configuration.
Therefore, using two GSI QPs for send (one for each RoCE version) and
one GSI QP for receive are required.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

RoCEv2 packets are sent over IP/UDP protocols.
The mlx4 driver uses a type of RAW QP to send packets for QP1 and
therefore needs to build the network headers below BTH in software.

This patch adds option to build QP1 packets with IP and UDP headers if
RoCEv2 is requested.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If the hardware supports RoCE v2, we configure the hardware UDP
port according to the RoCE v2 Annex when mlx4_ib device is added.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to support modify_qp for RoCE v2, we need to set
the gid_type in the QP context.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

This will be used in hardware device driver when building QP or AH
contexts.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In RoCE v2 we need to choose a source UDP port, we do so by using
entropy over the source and dest QPNs.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

In order to support RoCE v2, the hardware needs to be configured
to classify certain UDP packets as RoCE v2 packets and pass it
through its RoCE pipeline. This patch enables configuring this
UDP port.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

To tell hardware about a gid with type RoCEv2, software needs a new
modifier to the SET_PORT command: MLX4_SET_PORT_ROCE_ADDR. This can
replace the old method, MLX4_SET_PORT_GID_TABLE, for  RoCEv1 gids.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

If the hardware supports RoCE v2 (mixed with RoCE v1) mode, we enable
it. This is necessary in order to support RoCE v2.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

IB core driver adds a property of type to struct ib_gid_attr.
The mlx4 driver should take that in consideration when modifying or
querying the hardware gid table.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Query the RoCE support from firmware using the appropriate firmware
commands. Downstream patches will read these capabilities and act
accordingly.
Signed-off-by: NMoni Shoua <monis@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

We now alwasy have a per-PD local_dma_lkey available.  Make use of that
fact in svc_rdma and stop registering our own MR.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NJason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: NChuck Lever <chuck.lever@oracle.com>
Reviewed-by: NSteve Wise <swise@opengridcomputing.com>
Acked-by: NJ. Bruce Fields <bfields@redhat.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

To support the server-side of an NFSv4.1 backchannel on RDMA
connections, add a transport class that enables backward
direction messages on an existing forward channel connection.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Extra resources for handling backchannel requests have to be
pre-allocated when a transport instance is created. Set up
additional fields in svcxprt_rdma to track these resources.

The max_requests fields are elements of the RPC-over-RDMA
protocol, so they should be u32. To ensure that unsigned
arithmetic is used everywhere, some other fields in the
svcxprt_rdma struct are updated.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Pre-requisite to use map_xdr in the backchannel code.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Clean up.

These functions can otherwise fail, so check for page allocation
failures too.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

svc_rdma_post_recv() allocates pages for receive buffers on-demand.
It uses GFP_KERNEL so the allocator tries hard, and may sleep. But
I'm about to add a call to svc_rdma_post_recv() from a function
that may not sleep.

Since all svc_rdma_post_recv() call sites can tolerate its failure,
allow it to fail if the page allocator returns nothing. Longer term,
receive buffers, being a finite resource per-connection, should be
pre-allocated and re-used.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Clean up.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

To ensure this allocation cannot fail and will not sleep,
pre-allocate the req_map structures per-connection.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When the maximum payload size of NFS READ and WRITE was increased
by commit cc9a903d ("svcrdma: Change maximum server payload back
to RPCSVC_MAXPAYLOAD"), the size of struct svc_rdma_op_ctxt
increased to over 6KB (on x86_64). That makes allocating one of
these from a kmem_cache more likely to fail in situations when
system memory is exhausted.

Since I'm about to add a caller where this allocation must always
work _and_ it cannot sleep, pre-allocate ctxts for each connection.

Another motivation for this change is that NFSv4.x servers are
required by specification not to drop NFS requests. Pre-allocating
memory resources reduces the likelihood of a drop.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Be sure the completed ctxt is put in every path.

The xprt enqueue can take a while, so put the completed ctxt back
in circulation _before_ enqueuing the xprt.

Remove/disable debugging.
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

kzalloc is used here, so setting the atomic fields to zero is
unnecessary. sc_ord is set again in handle_connect_req. The other
fields are re-initialized in svc_rdma_accept().
Signed-off-by: NChuck Lever <chuck.lever@oracle.com>
Acked-by: NBruce Fields <bfields@fieldses.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Previously, IPV6_DEFAULT_HOPLIMIT was used as the hop limit value for
RoCE. Fixing that by taking ip4_dst_hoplimit and ip6_dst_hoplimit as
hop limit values.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

rdma_addr_find_dmac_by_grh resolves dmac, vlan_id and if_index and
downsteram patch will also add hop_limit as an output parameter,
thus we rename it to rdma_addr_find_l2_eth_by_grh.
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

ib_send_cm_drep() calls cm_enter_timewait() while holding a spinlock
that can be locked from inside an interrupt handler. Hence do not
enable interrupts inside cm_enter_timewait() if called with interrupts
disabled.

This patch fixes e.g. the following deadlock:
Acked-by: NErez Shitrit <erezsh@mellanox.com>

=================================
[ INFO: inconsistent lock state ]
4.4.0-rc7+ #1 Tainted: G            E
---------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W} usage.
swapper/8/0 [HC1[1]:SC0[0]:HE0:SE1] takes:
(&(&cm_id_priv->lock)->rlock){?.+...}, at: [<ffffffffa036eec4>] cm_establish+0x
74/0x1b0 [ib_cm]
{HARDIRQ-ON-W} state was registered at:
  [<ffffffff810a3c11>] mark_held_locks+0x71/0x90
  [<ffffffff810a3e87>] trace_hardirqs_on_caller+0xa7/0x1c0
  [<ffffffff810a3fad>] trace_hardirqs_on+0xd/0x10
  [<ffffffff8151c40b>] _raw_spin_unlock_irq+0x2b/0x40
  [<ffffffffa036ea8e>] cm_enter_timewait+0xae/0x100 [ib_cm]
  [<ffffffffa036ff76>] ib_send_cm_drep+0xb6/0x190 [ib_cm]
  [<ffffffffa052ed08>] srp_cm_handler+0x128/0x1a0 [ib_srp]
  [<ffffffffa0370340>] cm_process_work+0x20/0xf0 [ib_cm]
  [<ffffffffa0371335>] cm_dreq_handler+0x135/0x2c0 [ib_cm]
  [<ffffffffa03733c5>] cm_work_handler+0x75/0xd0 [ib_cm]
  [<ffffffff8107184d>] process_one_work+0x1bd/0x460
  [<ffffffff81073148>] worker_thread+0x118/0x420
  [<ffffffff81078454>] kthread+0xe4/0x100
  [<ffffffff8151cbbf>] ret_from_fork+0x3f/0x70
irq event stamp: 1672286
hardirqs last  enabled at (1672283): [<ffffffff81408ec0>] poll_idle+0x10/0x80
hardirqs last disabled at (1672284): [<ffffffff8151d304>] common_interrupt+0x84/0x89
softirqs last  enabled at (1672286): [<ffffffff8105b4dc>] _local_bh_enable+0x1c/0x50
softirqs last disabled at (1672285): [<ffffffff8105b697>] irq_enter+0x47/0x70

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&cm_id_priv->lock)->rlock);
  <Interrupt>
    lock(&(&cm_id_priv->lock)->rlock);

 *** DEADLOCK ***

no locks held by swapper/8/0.

stack backtrace:
CPU: 8 PID: 0 Comm: swapper/8 Tainted: G            E   4.4.0-rc7+ #1
Hardware name: Dell Inc. PowerEdge R430/03XKDV, BIOS 1.0.2 11/17/2014
 ffff88045af5e950 ffff88046e503a88 ffffffff81251c1b 0000000000000007
 0000000000000006 0000000000000003 ffff88045af5ddc0 ffff88046e503ad8
 ffffffff810a32f4 0000000000000000 0000000000000000 0000000000000001
Call Trace:
 <IRQ>  [<ffffffff81251c1b>] dump_stack+0x4f/0x74
 [<ffffffff810a32f4>] print_usage_bug+0x184/0x190
 [<ffffffff810a36e2>] mark_lock_irq+0xf2/0x290
 [<ffffffff810a3995>] mark_lock+0x115/0x1b0
 [<ffffffff810a3b8c>] mark_irqflags+0x15c/0x170
 [<ffffffff810a4fef>] __lock_acquire+0x1ef/0x560
 [<ffffffff810a53c2>] lock_acquire+0x62/0x80
 [<ffffffff8151bd33>] _raw_spin_lock_irqsave+0x43/0x60
 [<ffffffffa036eec4>] cm_establish+0x74/0x1b0 [ib_cm]
 [<ffffffffa036f031>] ib_cm_notify+0x31/0x100 [ib_cm]
 [<ffffffffa0637f24>] srpt_qp_event+0x54/0xd0 [ib_srpt]
 [<ffffffffa0196052>] mlx4_ib_qp_event+0x72/0xc0 [mlx4_ib]
 [<ffffffffa00775b9>] mlx4_qp_event+0x69/0xd0 [mlx4_core]
 [<ffffffffa006000e>] mlx4_eq_int+0x51e/0xd50 [mlx4_core]
 [<ffffffffa006084f>] mlx4_msi_x_interrupt+0xf/0x20 [mlx4_core]
 [<ffffffff810b67b0>] handle_irq_event_percpu+0x40/0x110
 [<ffffffff810b68bf>] handle_irq_event+0x3f/0x70
 [<ffffffff810ba7f9>] handle_edge_irq+0x79/0x120
 [<ffffffff81007f3d>] handle_irq+0x5d/0x130
 [<ffffffff810071fd>] do_IRQ+0x6d/0x130
 [<ffffffff8151d309>] common_interrupt+0x89/0x89
 <EOI>  [<ffffffff8140895f>] cpuidle_enter_state+0xcf/0x200
 [<ffffffff81408aa2>] cpuidle_enter+0x12/0x20
 [<ffffffff810990d6>] call_cpuidle+0x36/0x60
 [<ffffffff81099163>] cpuidle_idle_call+0x63/0x110
 [<ffffffff8109930a>] cpu_idle_loop+0xfa/0x130
 [<ffffffff8109934e>] cpu_startup_entry+0xe/0x10
 [<ffffffff8103c443>] start_secondary+0x83/0x90

Fixes: commit be4b4993 ("IB/cm: Do not queue work to a device that's going away")
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Erez Shitrit <erezsh@mellanox.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Avoid that the following kernel crash is triggered when processing
an RDMA completion:

BUG: unable to handle kernel paging request at 0000000100000198
IP: [<ffffffff810a4ea2>] __lock_acquire+0xa2/0x560
Call Trace:
 [<ffffffff810a53c2>] lock_acquire+0x62/0x80
 [<ffffffff8151bd33>] _raw_spin_lock_irqsave+0x43/0x60
 [<ffffffffa04fd437>] srpt_rdma_read_done+0x57/0x120 [ib_srpt]
 [<ffffffffa0144dd3>] __ib_process_cq+0x43/0xc0 [ib_core]
 [<ffffffffa0145115>] ib_cq_poll_work+0x25/0x70 [ib_core]
 [<ffffffff8107184d>] process_one_work+0x1bd/0x460
 [<ffffffff81073148>] worker_thread+0x118/0x420
 [<ffffffff81078454>] kthread+0xe4/0x100
 [<ffffffff8151cbbf>] ret_from_fork+0x3f/0x70

Fixes: commit 59fae4de ("IB/srpt: chain RDMA READ/WRITE requests").
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

The IRQ_POLL_F_SCHED bit is set as long as polling is ongoing.
This means that irq_poll_sched() must proceed if this bit has
not yet been set.

Fixes: commit ea51190c ("irq_poll: fold irq_poll_sched_prep into irq_poll_sched").
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Sparse complains about dereference before check. Fixing this by
moving the check before the dereference.

Fixes: 20029832 ('IB/core: Validate route when we init ah')
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

When write_gid function needs to do a sleep-able operation, it unlocks
table->rwlock and then relocks it. Sparse complains about context
imbalance.

This is safe as write_gid is always called with table->rwlock.
write_gid protects from simultaneous writes to this GID entry
by setting the GID_TABLE_ENTRY_INVALID flag.

Fixes: 9c584f04 ('IB/core: Change per-entry lock in RoCE GID table to
		     one lock')
Signed-off-by: NMatan Barak <matanb@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Port number is not part of ClassPortInfo attribute but is
still needed as a parameter when invoking process_mad.

To properly handle this attribute, port_num is added as a
parameter to get_counter_table and get_perf_mad was changed
not to store port_num in the attribute itself when it's
querying the ClassPortInfo attribute.

This handles issue pointed out by Matan Barak <matanb@dev.mellanox.co.il>

Fixes: 145d9c54 ('IB/core: Display extended counter set if available')
Signed-off-by: NHal Rosenstock <hal@mellanox.com>
Acked-by: NMatan Barak <matanb@mellanox.com>
Acked-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NChristoph Lameter <cl@linux.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Detected this by building the IB core with W=1. See also patch
"IB core: Fix ib_sg_to_pages()" (commit 8f5ba10e).
Signed-off-by: NBart Van Assche <bart.vanassche@sandisk.com>
Cc: Sagi Grimberg <sagig@mellanox.com>
Cc: Christoph Hellwig <hch@lst.de>
Reviewed-by: NLeon Romanovsky <leon.romanovsky@mellanox.com>
Acked-by: NSagi Grimberg <sagig@mellanox.com>
Reviewed-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Fix static checker warning:
        drivers/infiniband/hw/mlx5/main.c:149 mlx5_query_port_roce()
        warn: passing casted pointer '&props->qkey_viol_cntr' to
	'mlx5_query_nic_vport_qkey_viol_cntr()' 32 vs 16.

Fixes: 3f89a643 ("IB/mlx5: Extend query_device/port to support RoCE")
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NLeon Romanovsky <leonro@mellanox.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>

Remove the local workqueue to process mad completions and use the CQ API
instead.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Reviewed-by: NHal Rosenstock <hal@mellanox.com>
Reviewed-by: NIra Weiny <ira.weiny@intel.com>
Reviewed-by: NSagi Grimberg <sagig@mellanox.com>
Signed-off-by: NDoug Ledford <dledford@redhat.com>