- 28 3月, 2011 5 次提交
-
-
由 Li Dongyang 提交于
We take an free extent out from allocator, trim it, then put it back, but before we trim the block group, we should make sure the block group is cached, so plus a little change to make cache_block_group() run without a transaction. Signed-off-by: NLi Dongyang <lidongyang@novell.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Li Dongyang 提交于
Callers of btrfs_discard_extent() should check if we are mounted with -o discard, as we want to make fitrim to work even the fs is not mounted with -o discard. Also we should use REQ_DISCARD to map the free extent to get a full mapping, last we only return errors if 1. the error is not a EOPNOTSUPP 2. no device supports discard Signed-off-by: NLi Dongyang <lidongyang@novell.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Li Dongyang 提交于
Make the function public as we should update the reserved extents calculations after taking out an extent for trimming. Signed-off-by: NLi Dongyang <lidongyang@novell.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Liu Bo 提交于
Data compression and data cow are controlled across the entire FS by mount options right now. ioctls are needed to set this on a per file or per directory basis. This has been proposed previously, but VFS developers wanted us to use generic ioctls rather than btrfs-specific ones. According to Chris's comment, there should be just one true compression method(probably LZO) stored in the super. However, before this, we would wait for that one method is stable enough to be adopted into the super. So I list it as a long term goal, and just store it in ram today. After applying this patch, we can use the generic "FS_IOC_SETFLAGS" ioctl to control file and directory's datacow and compression attribute. NOTE: - The compression type is selected by such rules: If we mount btrfs with compress options, ie, zlib/lzo, the type is it. Otherwise, we'll use the default compress type (zlib today). v1->v2: - rebase to the latest btrfs. v2->v3: - fix a problem, i.e. when a file is set NOCOW via mount option, then this NOCOW will be screwed by inheritance from parent directory. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 liubo 提交于
Tracepoints can provide insight into why btrfs hits bugs and be greatly helpful for debugging, e.g dd-7822 [000] 2121.641088: btrfs_inode_request: root = 5(FS_TREE), gen = 4, ino = 256, blocks = 8, disk_i_size = 0, last_trans = 8, logged_trans = 0 dd-7822 [000] 2121.641100: btrfs_inode_new: root = 5(FS_TREE), gen = 8, ino = 257, blocks = 0, disk_i_size = 0, last_trans = 0, logged_trans = 0 btrfs-transacti-7804 [001] 2146.935420: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29368320 (orig_level = 0), cow_buf = 29388800 (cow_level = 0) btrfs-transacti-7804 [001] 2146.935473: btrfs_cow_block: root = 1(ROOT_TREE), refs = 2, orig_buf = 29364224 (orig_level = 0), cow_buf = 29392896 (cow_level = 0) btrfs-transacti-7804 [001] 2146.972221: btrfs_transaction_commit: root = 1(ROOT_TREE), gen = 8 flush-btrfs-2-7821 [001] 2155.824210: btrfs_chunk_alloc: root = 3(CHUNK_TREE), offset = 1103101952, size = 1073741824, num_stripes = 1, sub_stripes = 0, type = DATA flush-btrfs-2-7821 [001] 2155.824241: btrfs_cow_block: root = 2(EXTENT_TREE), refs = 2, orig_buf = 29388800 (orig_level = 0), cow_buf = 29396992 (cow_level = 0) flush-btrfs-2-7821 [001] 2155.824255: btrfs_cow_block: root = 4(DEV_TREE), refs = 2, orig_buf = 29372416 (orig_level = 0), cow_buf = 29401088 (cow_level = 0) flush-btrfs-2-7821 [000] 2155.824329: btrfs_cow_block: root = 3(CHUNK_TREE), refs = 2, orig_buf = 20971520 (orig_level = 0), cow_buf = 20975616 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898019: btrfs_cow_block: root = 5(FS_TREE), refs = 2, orig_buf = 29384704 (orig_level = 0), cow_buf = 29405184 (cow_level = 0) btrfs-endio-wri-7800 [001] 2155.898043: btrfs_cow_block: root = 7(CSUM_TREE), refs = 2, orig_buf = 29376512 (orig_level = 0), cow_buf = 29409280 (cow_level = 0) Here is what I have added: 1) ordere_extent: btrfs_ordered_extent_add btrfs_ordered_extent_remove btrfs_ordered_extent_start btrfs_ordered_extent_put These provide critical information to understand how ordered_extents are updated. 2) extent_map: btrfs_get_extent extent_map is used in both read and write cases, and it is useful for tracking how btrfs specific IO is running. 3) writepage: __extent_writepage btrfs_writepage_end_io_hook Pages are cirtical resourses and produce a lot of corner cases during writeback, so it is valuable to know how page is written to disk. 4) inode: btrfs_inode_new btrfs_inode_request btrfs_inode_evict These can show where and when a inode is created, when a inode is evicted. 5) sync: btrfs_sync_file btrfs_sync_fs These show sync arguments. 6) transaction: btrfs_transaction_commit In transaction based filesystem, it will be useful to know the generation and who does commit. 7) back reference and cow: btrfs_delayed_tree_ref btrfs_delayed_data_ref btrfs_delayed_ref_head btrfs_cow_block Btrfs natively supports back references, these tracepoints are helpful on understanding btrfs's COW mechanism. 8) chunk: btrfs_chunk_alloc btrfs_chunk_free Chunk is a link between physical offset and logical offset, and stands for space infomation in btrfs, and these are helpful on tracing space things. 9) reserved_extent: btrfs_reserved_extent_alloc btrfs_reserved_extent_free These can show how btrfs uses its space. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 26 3月, 2011 1 次提交
-
-
由 Josef Bacik 提交于
This patch makes the free space cluster refilling code a little easier to understand, and fixes some things with the bitmap part of it. Currently we either want to refill a cluster with 1) All normal extent entries (those without bitmaps) 2) A bitmap entry with enough space The current code has this ugly jump around logic that will first try and fill up the cluster with extent entries and then if it can't do that it will try and find a bitmap to use. So instead split this out into two functions, one that tries to find only normal entries, and one that tries to find bitmaps. This also fixes a suboptimal thing we would do with bitmaps. If we used a bitmap we would just tell the cluster that we were pointing at a bitmap and it would do the tree search in the block group for that entry every time we tried to make an allocation. Instead of doing that now we just add it to the clusters group. I tested this with my ENOSPC tests and xfstests and it survived. Signed-off-by: NJosef Bacik <josef@redhat.com>
-
- 18 3月, 2011 4 次提交
-
-
由 Josef Bacik 提交于
We need to make sure the dir items we get are valid dir items. So any time we try and read one check it with verify_dir_item, which will do various sanity checks to make sure it looks sane. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
If we cannot truncate an inode for some reason we will never delete the orphan item associated with that inode, which means that we will loop forever in btrfs_orphan_cleanup. Instead of doing this just return error so we fail to mount. It sucks, but hey it's better than hanging. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
->truncate() is going away, instead all of the work needs to be done in ->setattr(). So this converts us over to do this. It's fairly straightforward, just get rid of our .truncate inode operation and call btrfs_truncate() directly from btrfs_setsize. This works out better for us since truncate can technically return ENOSPC, and before we had no way of letting anybody know. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
Since we alloc/free free space entries a whole lot, lets use a slab to keep track of them. This makes some of my tests slightly faster. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
- 12 3月, 2011 1 次提交
-
-
由 Chris Mason 提交于
Josef had changed shrink_delalloc to exit after three shrink attempts, which wasn't quite enough because new writers could race in and steal free space. But it also fixed deadlocks and stalls as we tried to recover delalloc reservations. The code was tweaked to loop 1024 times, and would reset the counter any time a small amount of progress was made. This was too drastic, and with a lot of writers we can end up stuck in shrink_delalloc forever. The shrink_delalloc loop is fairly complex because the caller is looping too, and the caller will go ahead and force a transaction commit to make sure we reclaim space. This reworks things to exit shrink_delalloc when we've forced some writeback and the delalloc reservations have gone down. This means the writeback has not just started but has also finished at least some of the metadata changes required to reclaim delalloc space. If we've got this wrong, we're returning ENOSPC too early, which is a big improvement over the current behavior of hanging the machine. Test 224 in xfstests hammers on this nicely, and with 1000 writers trying to fill a 1GB drive we get our first ENOSPC at 93% full. The other writers are able to continue until we get 100%. This is a worst case test for btrfs because the 1000 writers are doing small IO, and the small FS size means we don't have a lot of room for metadata chunks. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 17 2月, 2011 2 次提交
-
-
由 Chris Mason 提交于
Btrfs device shrinking and balancing ends up reallocating all the blocks in order to allow COW to move them to new destinations. It is somewhat awkward in terms of ENOSPC because most of the enospc code is built around the idea that some operation on a reference counted tree triggers allocations in the non-reference counted trees. This commit changes the balancing code to deal with enospc by trying to allocate a new chunk. If that allocation succeeds, we go ahead and retry whatever failed due to enospc. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Chris Mason 提交于
ENOSPC in btrfs is getting to the point where the extra debugging isn't required. I've put it under mount -o enospc_debug just in case someone is having difficult problems. Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 18 1月, 2011 1 次提交
-
-
由 liubo 提交于
This patch comes from "Forced readonly mounts on errors" ideas. As we know, this is the first step in being more fault tolerant of disk corruptions instead of just using BUG() statements. The major content: - add a framework for generating errors that should result in filesystems going readonly. - keep FS state in disk super block. - make sure that all of resource will be freed and released at umount time. - make sure that fter FS is forced readonly on error, there will be no more disk change before FS is corrected. For this, we should stop write operation. After this patch is applied, the conversion from BUG() to such a framework can happen incrementally. Signed-off-by: NLiu Bo <liubo2009@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 17 1月, 2011 3 次提交
-
-
由 Stefan Schmidt 提交于
Fix the build failure in some configurations: CC [M] fs/btrfs/ctree.o In file included from fs/btrfs/ctree.c:21:0: fs/btrfs/ctree.h:1003:17: error: field 'super_kobj' has incomplete type fs/btrfs/ctree.h:1074:17: error: field 'root_kobj' has incomplete type make[2]: *** [fs/btrfs/ctree.o] Error 1 make[1]: *** [fs/btrfs] Error 2 make: *** [fs] Error 2 caused by commit 57cc7215 ("headers: kobject.h redux") We need to include kobject.h here. Reported-by: NJeff Garzik <jeff@garzik.org> Fix-suggested-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NStefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Miao Xie 提交于
When we store data by raid profile in btrfs with two or more different size disks, df command shows there is some free space in the filesystem, but the user can not write any data in fact, df command shows the wrong free space information of btrfs. # mkfs.btrfs -d raid1 /dev/sda9 /dev/sda10 # btrfs-show Label: none uuid: a95cd49e-6e33-45b8-8741-a36153ce4b64 Total devices 2 FS bytes used 28.00KB devid 1 size 5.01GB used 2.03GB path /dev/sda9 devid 2 size 10.00GB used 2.01GB path /dev/sda10 # btrfs device scan /dev/sda9 /dev/sda10 # mount /dev/sda9 /mnt # dd if=/dev/zero of=tmpfile0 bs=4K count=9999999999 (fill the filesystem) # sync # df -TH Filesystem Type Size Used Avail Use% Mounted on /dev/sda9 btrfs 17G 8.6G 5.4G 62% /mnt # btrfs-show Label: none uuid: a95cd49e-6e33-45b8-8741-a36153ce4b64 Total devices 2 FS bytes used 3.99GB devid 1 size 5.01GB used 5.01GB path /dev/sda9 devid 2 size 10.00GB used 4.99GB path /dev/sda10 It is because btrfs cannot allocate chunks when one of the pairing disks has no space, the free space on the other disks can not be used for ever, and should be subtracted from the total space, but btrfs doesn't subtract this space from the total. It is strange to the user. This patch fixes it by calcing the free space that can be used to allocate chunks. Implementation: 1. get all the devices free space, and align them by stripe length. 2. sort the devices by the free space. 3. check the free space of the devices, 3.1. if it is not zero, and then check the number of the devices that has more free space than this device, if the number of the devices is beyond the min stripe number, the free space can be used, and add into total free space. if the number of the devices is below the min stripe number, we can not use the free space, the check ends. 3.2. if the free space is zero, check the next devices, goto 3.1 This implementation is just likely fake chunk allocation. After appling this patch, df can show correct space information: # df -TH Filesystem Type Size Used Avail Use% Mounted on /dev/sda9 btrfs 17G 8.6G 0 100% /mnt Signed-off-by: NMiao Xie <miaox@cn.fujitsu.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Stefan Schmidt 提交于
CC [M] fs/btrfs/ctree.o In file included from fs/btrfs/ctree.c:21:0: fs/btrfs/ctree.h:1003:17: error: field <91>super_kobj<92> has incomplete type fs/btrfs/ctree.h:1074:17: error: field <91>root_kobj<92> has incomplete type make[2]: *** [fs/btrfs/ctree.o] Error 1 make[1]: *** [fs/btrfs] Error 2 make: *** [fs] Error 2 We need to include kobject.h here. Reported-by: NJeff Garzik <jeff@garzik.org> Fix-suggested-by: NLi Zefan <lizf@cn.fujitsu.com> Signed-off-by: NStefan Schmidt <stefan@datenfreihafen.org> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 07 1月, 2011 1 次提交
-
-
由 Nick Piggin 提交于
Signed-off-by: NNick Piggin <npiggin@kernel.dk>
-
- 23 12月, 2010 1 次提交
-
-
由 Li Zefan 提交于
Usage: Set BTRFS_SUBVOL_RDONLY of btrfs_ioctl_vol_arg_v2->flags, and call ioctl(BTRFS_I0CTL_SNAP_CREATE_V2). Implementation: - Set readonly bit of btrfs_root_item->flags. - Add readonly checks in btrfs_permission (inode_permission), btrfs_setattr, btrfs_set/remove_xattr and some ioctls. Changelog for v3: - Eliminate btrfs_root->readonly, but check btrfs_root->root_item.flags. - Rename BTRFS_ROOT_SNAP_RDONLY to BTRFS_ROOT_SUBVOL_RDONLY. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
- 22 12月, 2010 2 次提交
-
-
由 Li Zefan 提交于
Lzo is a much faster compression algorithm than gzib, so would allow more users to enable transparent compression, and some users can choose from compression ratio and speed for different applications Usage: # mount -t btrfs -o compress[=<zlib,lzo>] dev /mnt or # mount -t btrfs -o compress-force[=<zlib,lzo>] dev /mnt "-o compress" without argument is still allowed for compatability. Compatibility: If we mount a filesystem with lzo compression, it will not be able be mounted in old kernels. One reason is, otherwise btrfs will directly dump compressed data, which sits in inline extent, to user. Performance: The test copied a linux source tarball (~400M) from an ext4 partition to the btrfs partition, and then extracted it. (time in second) lzo zlib nocompress copy: 10.6 21.7 14.9 extract: 70.1 94.4 66.6 (data size in MB) lzo zlib nocompress copy: 185.87 108.69 394.49 extract: 193.80 132.36 381.21 Changelog: v1 -> v2: - Select LZO_COMPRESS and LZO_DECOMPRESS in btrfs Kconfig. - Add incompability flag. - Fix error handling in compress code. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
由 Li Zefan 提交于
Make the code aware of compression type, instead of always assuming zlib compression. Also make the zlib workspace function as common code for all compression types. Signed-off-by: NLi Zefan <lizf@cn.fujitsu.com>
-
- 22 11月, 2010 1 次提交
-
-
由 Mariusz Kozlowski 提交于
Fixes these sparse warnings: fs/btrfs/ctree.h:811:17: error: dubious one-bit signed bitfield fs/btrfs/ctree.h:812:20: error: dubious one-bit signed bitfield fs/btrfs/ctree.h:813:19: error: dubious one-bit signed bitfield Signed-off-by: NMariusz Kozlowski <mk@lab.zgora.pl> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 30 10月, 2010 2 次提交
-
-
由 Sage Weil 提交于
Add a mount option user_subvol_rm_allowed that allows users to delete a (potentially non-empty!) subvol when they would otherwise we allowed to do an rmdir(2). We duplicate the may_delete() checks from the core VFS code to implement identical security checks (minus the directory size check). We additionally require that the user has write+exec permission on the subvol root inode. Signed-off-by: NSage Weil <sage@newdream.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Sage Weil 提交于
Add support for an async transaction commit that is ordered such that any subsequent operations will join the following transaction, but does not wait until the current commit is fully on disk. This avoids much of the latency associated with the btrfs_commit_transaction for callers concerned with serialization and not safety. The wait_for_unblock flag controls whether we wait for the 'middle' portion of commit_transaction to complete, which is necessary if the caller expects some of the modifications contained in the commit to be available (this is the case for subvol/snapshot creation). Signed-off-by: NSage Weil <sage@newdream.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
- 29 10月, 2010 4 次提交
-
-
由 Josef Bacik 提交于
If something goes wrong with the free space cache we need a way to make sure it's not loaded on mount and that it's cleared for everybody. When you pass the clear_cache option it will make it so all block groups are setup to be cleared, which keeps them from being loaded and then they will be truncated when the transaction is committed. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
There are just a few things that need to be fixed in the kernel to support mixed data+metadata block groups. Mostly we just need to make sure that if we are using mixed block groups that we continue to allocate mixed block groups as we need them. Also we need to make sure __find_space_info will find our space info if we search for DATA or METADATA only. Tested this with xfstests and it works nicely. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
This is a simple bit, just dump the free space cache out to our preallocated inode when we're writing out dirty block groups. There are a bunch of changes in inode.c in order to account for special cases. Mostly when we're doing the writeout we're holding trans_mutex, so we need to use the nolock transacation functions. Also we can't do asynchronous completions since the async thread could be blocked on already completed IO waiting for the transaction lock. This has been tested with xfstests and btrfs filesystem balance, as well as my ENOSPC tests. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
In order to save free space cache, we need an inode to hold the data, and we need a special item to point at the right inode for the right block group. So first, create a special item that will point to the right inode, and the number of extent entries we will have and the number of bitmaps we will have. We truncate and pre-allocate space everytime to make sure it's uptodate. This feature will be turned on as soon as you mount with -o space_cache, however it is safe to boot into old kernels, they will just generate the cache the old fashion way. When you boot back into a newer kernel we will notice that we modified and not the cache and automatically discard the cache. Signed-off-by: NJosef Bacik <josef@redhat.com>
-
- 23 10月, 2010 3 次提交
-
-
由 Josef Bacik 提交于
With multi-threaded writes we were getting ENOSPC early because somebody would come in, start flushing delalloc because they couldn't make their reservation, and in the meantime other threads would come in and use the space that was getting freed up, so when the original thread went to check to see if they had space they didn't and they'd return ENOSPC. So instead if we have some free space but not enough for our reservation, take the reservation and then start doing the flushing. The only time we don't take reservations is when we've already overcommitted our space, that way we don't have people who come late to the party way overcommitting ourselves. This also moves all of the retrying and flushing code into reserve_metdata_bytes so it's all uniform. This keeps my fs_mark test from returning -ENOSPC as soon as it starts and actually lets me fill up the disk. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
Currently we try and flush delalloc, but we only do that in a sort of weak way, which works fine in most cases but if we're under heavy pressure we need to be able to wait for flushing to happen. Also instead of checking the bytes reserved in the block_rsv, check the space info since it is more accurate. The sync option will be used in a future patch. Signed-off-by: NJosef Bacik <josef@redhat.com>
-
由 Josef Bacik 提交于
The new ENOSPC stuff breaks out the raid types which breaks the way we were reporting df to the system. This fixes it back so that Available is the total space available to data and used is the actual bytes used by the filesystem. This means that Available is Total - data used - all of the metadata space. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com>
-
- 10 8月, 2010 2 次提交
-
-
由 Al Viro 提交于
... and let iput_final() do the actual eviction or retention Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
NB: do we want btrfs_wait_ordered_range() on eviction of inodes with positive i_nlink on subvolume with zero root_refs? If not, btrfs_evict_inode() can be simplified by unconditionally bailing out in case of i_nlink > 0 in the very beginning... Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 28 5月, 2010 1 次提交
-
-
由 Christoph Hellwig 提交于
Signed-off-by: NChristoph Hellwig <hch@lst.de> Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
- 25 5月, 2010 6 次提交
-
-
由 Josef Bacik 提交于
This provides basic DIO support for reading and writing. It does not do the work to recover from mismatching checksums, that will come later. A few design changes have been made from Jim's code (sorry Jim!) 1) Use the generic direct-io code. Jim originally re-wrote all the generic DIO code in order to account for all of BTRFS's oddities, but thanks to that work it seems like the best bet is to just ignore compression and such and just opt to fallback on buffered IO. 2) Fallback on buffered IO for compressed or inline extents. Jim's code did it's own buffering to make dio with compressed extents work. Now we just fallback onto normal buffered IO. 3) Use ordered extents for the writes so that all of the lock_extent() lookup_ordered() type checks continue to work. 4) Do the lock_extent() lookup_ordered() loop in readpage so we don't race with DIO writes. I've tested this with fsx and everything works great. This patch depends on my dio and filemap.c patches to work. Thanks, Signed-off-by: NJosef Bacik <josef@redhat.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
This patch adds metadata ENOSPC handling for the balance code. It is consisted by following major changes: 1. Avoid COW tree leave in the phrase of merging tree. 2. Handle interaction with snapshot creation. 3. make the backref cache can live across transactions. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
Pre-allocate space for data relocation. This can detect ENOPSC condition caused by fragmentation of free space. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
reserve metadata space for handling orphan inodes Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
Reserve metadata space for extent tree, checksum tree and root tree Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Yan, Zheng 提交于
Introduce metadata reservation context for delayed allocation and update various related functions. This patch also introduces EXTENT_FIRST_DELALLOC control bit for set/clear_extent_bit. It tells set/clear_bit_hook whether they are processing the first extent_state with EXTENT_DELALLOC bit set. This change is important if set/clear_extent_bit involves multiple extent_state. Signed-off-by: NYan Zheng <zheng.yan@oracle.com> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-