- 08 5月, 2012 1 次提交
-
-
由 Ben Guthro 提交于
Map native ipi vector to xen vector. Implement apic ipi interface with xen_send_IPI_one. Tested-by: NSteven Noonan <steven@uplinklabs.net> Signed-off-by: NBen Guthro <ben@guthro.net> Signed-off-by: NLin Ming <mlin@ss.pku.edu.cn> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 07 4月, 2012 1 次提交
-
-
由 Srivatsa S. Bhat 提交于
There is an extra and unnecessary call to smp_processor_id() in cpu_bringup(). Remove it. Signed-off-by: NSrivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 22 3月, 2012 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
The CPU hotplug code has now a callback to help bring up the CPU. Without the call we end up getting: BUG: soft lockup - CPU#0 stuck for 29s! [migration/0:6] Modules linked in: CPU ] Pid: 6, comm: migration/0 Not tainted 3.3.0upstream-01180-ged378a52 #1 Dell Inc. PowerEdge T105 /0RR825 RIP: e030:[<ffffffff810d3b8b>] [<ffffffff810d3b8b>] stop_machine_cpu_stop+0x7b/0xf0 RSP: e02b:ffff8800ceaabdb0 EFLAGS: 00000293 .. snip.. Call Trace: [<ffffffff810d3b10>] ? stop_one_cpu_nowait+0x50/0x50 [<ffffffff810d3841>] cpu_stopper_thread+0xf1/0x1c0 [<ffffffff815a9776>] ? __schedule+0x3c6/0x760 [<ffffffff815aa749>] ? _raw_spin_unlock_irqrestore+0x19/0x30 [<ffffffff810d3750>] ? res_counter_charge+0x150/0x150 [<ffffffff8108dc76>] kthread+0x96/0xa0 [<ffffffff815b27e4>] kernel_thread_helper+0x4/0x10 [<ffffffff815aacbc>] ? retint_restore_ar Thix fixes it. Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 04 2月, 2012 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
When a user offlines a VCPU and then onlines it, we get: NMI watchdog disabled (cpu2): hardware events not enabled BUG: scheduling while atomic: swapper/2/0/0x00000002 Modules linked in: dm_multipath dm_mod xen_evtchn iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi scsi_mod libcrc32c crc32c radeon fbco ttm bitblit softcursor drm_kms_helper xen_blkfront xen_netfront xen_fbfront fb_sys_fops sysimgblt sysfillrect syscopyarea xen_kbdfront xenfs [last unloaded: Pid: 0, comm: swapper/2 Tainted: G O 3.2.0phase15.1-00003-gd6f7f5b-dirty #4 Call Trace: [<ffffffff81070571>] __schedule_bug+0x61/0x70 [<ffffffff8158eb78>] __schedule+0x798/0x850 [<ffffffff8158ed6a>] schedule+0x3a/0x50 [<ffffffff810349be>] cpu_idle+0xbe/0xe0 [<ffffffff81583599>] cpu_bringup_and_idle+0xe/0x10 The reason for this should be obvious from this call-chain: cpu_bringup_and_idle: \- cpu_bringup | \-[preempt_disable] | |- cpu_idle \- play_dead [assuming the user offlined the VCPU] | \ | +- (xen_play_dead) | \- HYPERVISOR_VCPU_off [so VCPU is dead, once user | | onlines it starts from here] | \- cpu_bringup [preempt_disable] | +- preempt_enable_no_reschedule() +- schedule() \- preempt_enable() So we have two preempt_disble() and one preempt_enable(). Calling preempt_enable() after the cpu_bringup() in the xen_play_dead fixes the imbalance. Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 25 1月, 2012 1 次提交
-
-
由 Alex Shi 提交于
percpu_xxx funcs are duplicated with this_cpu_xxx funcs, so replace them for further code clean up. I don't know much of xen code. But, since the code is in x86 architecture, the percpu_xxx is exactly same as this_cpu_xxx serials functions. So, the change is safe. Signed-off-by: NAlex Shi <alex.shi@intel.com> Acked-by: NChristoph Lameter <cl@gentwo.org> Acked-by: NTejun Heo <tj@kernel.org> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 09 9月, 2011 1 次提交
-
-
由 Stefano Stabellini 提交于
PV spinlocks cannot possibly work with the current code because they are enabled after pvops patching has already been done, and because PV spinlocks use a different data structure than native spinlocks so we cannot switch between them dynamically. A spinlock that has been taken once by the native code (__ticket_spin_lock) cannot be taken by __xen_spin_lock even after it has been released. Reported-and-Tested-by: NStefan Bader <stefan.bader@canonical.com> Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 02 9月, 2011 1 次提交
-
-
由 Konrad Rzeszutek Wilk 提交于
We have hit a couple of customer bugs where they would like to use those parameters to run an UP kernel - but both of those options turn of important sources of interrupt information so we end up not being able to boot. The correct way is to pass in 'dom0_max_vcpus=1' on the Xen hypervisor line and the kernel will patch itself to be a UP kernel. Fixes bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=637308 CC: stable@kernel.org Acked-by: NIan Campbell <Ian.Campbell@eu.citrix.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 22 8月, 2011 1 次提交
-
-
由 Stefano Stabellini 提交于
Fix regression for HVM case on older (<4.1.1) hypervisors caused by commit 99bbb3a8 Author: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Date: Thu Dec 2 17:55:10 2010 +0000 xen: PV on HVM: support PV spinlocks and IPIs This change replaced the SMP operations with event based handlers without taking into account that this only works when the hypervisor supports callback vectors. This causes unexplainable hangs early on boot for HVM guests with more than one CPU. BugLink: http://bugs.launchpad.net/bugs/791850 CC: stable@kernel.org Signed-off-by: NStefan Bader <stefan.bader@canonical.com> Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Tested-and-Reported-by: NStefan Bader <stefan.bader@canonical.com> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 16 6月, 2011 1 次提交
-
-
由 Andrew Jones 提交于
The MAXSMP config option requires CPUMASK_OFFSTACK, which in turn requires we init the memory for the maps while we bring up the cpus. MAXSMP also increases NR_CPUS to 4096. This increase in size exposed an issue in the argument construction for multicalls from xen_flush_tlb_others. The args should only need space for the actual number of cpus. Also in 2.6.39 it exposes a bootup problem. BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<ffffffff8157a1d3>] set_cpu_sibling_map+0x123/0x30d ... Call Trace: [<ffffffff81039a3f>] ? xen_restore_fl_direct_reloc+0x4/0x4 [<ffffffff819dc4db>] xen_smp_prepare_cpus+0x36/0x135 .. CC: stable@kernel.org Signed-off-by: NAndrew Jones <drjones@redhat.com> [v2: Updated to compile on 3.0] [v3: Updated to compile when CONFIG_SMP is not defined] Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 19 5月, 2011 1 次提交
-
-
由 Daniel Kiper 提交于
Cleanup code/data sections definitions accordingly to include/linux/init.h. Signed-off-by: NDaniel Kiper <dkiper@net-space.pl> Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 14 4月, 2011 1 次提交
-
-
由 Peter Zijlstra 提交于
For future rework of try_to_wake_up() we'd like to push part of that function onto the CPU the task is actually going to run on. In order to do so we need a generic callback from the existing scheduler IPI. This patch introduces such a generic callback: scheduler_ipi() and implements it as a NOP. BenH notes: PowerPC might use this IPI on offline CPUs under rare conditions! Acked-by: NRussell King <rmk+kernel@arm.linux.org.uk> Acked-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Acked-by: NChris Metcalf <cmetcalf@tilera.com> Acked-by: NJesper Nilsson <jesper.nilsson@axis.com> Acked-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org> Reviewed-by: NFrank Rowand <frank.rowand@am.sony.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Nick Piggin <npiggin@kernel.dk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/20110405152728.744338123@chello.nl
-
- 26 2月, 2011 1 次提交
-
-
由 Stefano Stabellini 提交于
Initialize PV spinlocks on boot CPU right after native_smp_prepare_cpus (that switch to APIC mode and initialize APIC routing); on secondary CPUs on CPU_UP_PREPARE. Enable the usage of event channels to send and receive IPIs when running as a PV on HVM guest. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
-
- 27 10月, 2010 1 次提交
-
-
由 Stefano Stabellini 提交于
Pv guests don't have ACPI and need the cpu masks to be set correctly as early as possible so we call xen_fill_possible_map from xen_smp_init. On the other hand the initial domain supports ACPI so in this case we skip xen_fill_possible_map and rely on it. However Xen might limit the number of cpus usable by the domain, so we filter those masks during smp initialization using the VCPUOP_is_up hypercall. It is important that the filtering is done before xen_setup_vcpu_info_placement. Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com>
-
- 23 10月, 2010 1 次提交
-
-
由 Stefano Stabellini 提交于
Signed-off-by: NStefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>
-
- 22 10月, 2010 1 次提交
-
-
由 Alok Kataria 提交于
x86 smp_ops now has a new op, stop_other_cpus which takes a parameter "wait" this allows the caller to specify if it wants to stop until all the cpus have processed the stop IPI. This is required specifically for the kexec case where we should wait for all the cpus to be stopped before starting the new kernel. We now wait for the cpus to stop in all cases except for panic/kdump where we expect things to be broken and we are doing our best to make things work anyway. This patch fixes a legitimate regression, which was introduced during 2.6.30, by commit id 4ef702c1. Signed-off-by: NAlok N Kataria <akataria@vmware.com> LKML-Reference: <1286833028.1372.20.camel@ank32.eng.vmware.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: <stable@kernel.org> v2.6.30-36 Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 05 8月, 2010 1 次提交
-
-
由 Ian Campbell 提交于
Offline vcpu when using stop_self. Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 05 2月, 2010 1 次提交
-
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 04 12月, 2009 1 次提交
-
-
由 Ian Campbell 提交于
The commit "xen: re-register runstate area earlier on resume" caused us to never try and setup the runstate area for secondary CPUs. Ensure that we do this... Signed-off-by: NIan Campbell <ian.campbell@citrix.com> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Stable Kernel <stable@kernel.org>
-
- 04 11月, 2009 1 次提交
-
-
由 Rusty Russell 提交于
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> LKML-Reference: <200911031458.38406.rusty@rustcorp.com.au> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 29 10月, 2009 1 次提交
-
-
由 Tejun Heo 提交于
This patch updates percpu related symbols in xen such that percpu symbols are unique and don't clash with local symbols. This serves two purposes of decreasing the possibility of global percpu symbol collision and allowing dropping per_cpu__ prefix from percpu symbols. * arch/x86/xen/smp.c, arch/x86/xen/time.c, arch/ia64/xen/irq_xen.c: add xen_ prefix to percpu variables * arch/ia64/xen/time.c: add xen_ prefix to percpu variables, drop processed_ prefix and make them static Partly based on Rusty Russell's "alloc_percpu: rename percpu vars which cause name clashes" patch. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jeremy Fitzhardinge <jeremy@xensource.com> Cc: Chris Wright <chrisw@sous-sol.org>
-
- 10 9月, 2009 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
-fstack-protector uses a special per-cpu "stack canary" value. gcc generates special code in each function to test the canary to make sure that the function's stack hasn't been overrun. On x86-64, this is simply an offset of %gs, which is the usual per-cpu base segment register, so setting it up simply requires loading %gs's base as normal. On i386, the stack protector segment is %gs (rather than the usual kernel percpu %fs segment register). This requires setting up the full kernel GDT and then loading %gs accordingly. We also need to make sure %gs is initialized when bringing up secondary cpus too. To keep things consistent, we do the full GDT/segment register setup on both architectures. Because we need to avoid -fstack-protected code before setting up the GDT and because there's no way to disable it on a per-function basis, several files need to have stack-protector inhibited. [ Impact: allow Xen booting with stack-protector enabled ] Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
- 09 4月, 2009 1 次提交
-
-
由 Hannes Eder 提交于
Fix this sparse warnings: arch/x86/xen/smp.c:316:52: warning: Using plain integer as NULL pointer arch/x86/xen/smp.c:421:60: warning: Using plain integer as NULL pointer Signed-off-by: NHannes Eder <hannes@hanneseder.net> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
- 31 3月, 2009 1 次提交
-
-
由 Hannes Eder 提交于
Fix this sparse warnings: arch/x86/xen/smp.c:316:52: warning: Using plain integer as NULL pointer arch/x86/xen/smp.c:421:60: warning: Using plain integer as NULL pointer Signed-off-by: NHannes Eder <hannes@hanneseder.net> Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
-
- 13 3月, 2009 1 次提交
-
-
由 Rusty Russell 提交于
Impact: cleanup 1) &cpu_online_map -> cpu_online_mask 2) first_cpu/next_cpu_nr -> cpumask_first/cpumask_next 3) cpu_*_map manipulation -> init_cpu_* / set_cpu_* Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
-
- 02 3月, 2009 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
The virtually mapped percpu space causes us two problems: - for hypercalls which take an mfn, we need to do a full pagetable walk to convert the percpu va into an mfn, and - when a hypercall requires a page to be mapped RO via all its aliases, we need to make sure its RO in both the percpu mapping and in the linear mapping This primarily affects the gdt and the vcpu info structure. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Cc: Xen-devel <xen-devel@lists.xensource.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Tejun Heo <htejun@gmail.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 05 2月, 2009 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
We need to access percpu data fairly early, so set up the percpu registers as soon as possible. We only need to load the appropriate segment register. We already have a GDT, but its hard to change it early because we need to manipulate the pagetable to do so, and that hasn't been set up yet. Also, set the kernel stack when bringing up secondary CPUs. If we don't they all end up sharing the same stack... Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NH. Peter Anvin <hpa@linux.intel.com>
-
- 31 1月, 2009 1 次提交
-
-
由 Jeremy Fitzhardinge 提交于
Impact: fix xen booting We need to access percpu data fairly early, so set up the percpu registers as soon as possible. We only need to load the appropriate segment register. We already have a GDT, but its hard to change it early because we need to manipulate the pagetable to do so, and that hasn't been set up yet. Signed-off-by: NJeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 27 1月, 2009 1 次提交
-
-
由 Brian Gerst 提交于
Impact: cleanup Rename init_gdt() to setup_percpu_segment(), and move it to setup_percpu.c. Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 18 1月, 2009 2 次提交
-
-
由 Brian Gerst 提交于
Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Brian Gerst 提交于
Signed-off-by: NBrian Gerst <brgerst@gmail.com> Signed-off-by: NTejun Heo <tj@kernel.org>
-
- 16 1月, 2009 2 次提交
-
-
由 Ingo Molnar 提交于
It is an optimization and a cleanup, and adds the following new generic percpu methods: percpu_read() percpu_write() percpu_add() percpu_sub() percpu_and() percpu_or() percpu_xor() and implements support for them on x86. (other architectures will fall back to a default implementation) The advantage is that for example to read a local percpu variable, instead of this sequence: return __get_cpu_var(var); ffffffff8102ca2b: 48 8b 14 fd 80 09 74 mov -0x7e8bf680(,%rdi,8),%rdx ffffffff8102ca32: 81 ffffffff8102ca33: 48 c7 c0 d8 59 00 00 mov $0x59d8,%rax ffffffff8102ca3a: 48 8b 04 10 mov (%rax,%rdx,1),%rax We can get a single instruction by using the optimized variants: return percpu_read(var); ffffffff8102ca3f: 65 48 8b 05 91 8f fd mov %gs:0x7efd8f91(%rip),%rax I also cleaned up the x86-specific APIs and made the x86 code use these new generic percpu primitives. tj: * fixed generic percpu_sub() definition as Roel Kluin pointed out * added percpu_and() for completeness's sake * made generic percpu ops atomic against preemption Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NTejun Heo <tj@kernel.org>
-
由 Tejun Heo 提交于
[ Based on original patch from Christoph Lameter and Mike Travis. ] Currently pdas and percpu areas are allocated separately. %gs points to local pda and percpu area can be reached using pda->data_offset. This patch folds pda into percpu area. Due to strange gcc requirement, pda needs to be at the beginning of the percpu area so that pda->stack_canary is at %gs:40. To achieve this, a new percpu output section macro - PERCPU_VADDR_PREALLOC() - is added and used to reserve pda sized chunk at the start of the percpu area. After this change, for boot cpu, %gs first points to pda in the data.init area and later during setup_per_cpu_areas() gets updated to point to the actual pda. This means that setup_per_cpu_areas() need to reload %gs for CPU0 while clearing pda area for other cpus as cpu0 already has modified it when control reaches setup_per_cpu_areas(). This patch also removes now unnecessary get_local_pda() and its call sites. A lot of this patch is taken from Mike Travis' "x86_64: Fold pda into per cpu area" patch. Signed-off-by: NTejun Heo <tj@kernel.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 17 12月, 2008 3 次提交
-
-
由 Mike Travis 提交于
This patch simply changes cpumask_t to struct cpumask and similar trivial modernizations. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NMike Travis <travis@sgi.com>
-
由 Mike Travis 提交于
Simple change, and eventual space saving when NR_CPUS >> nr_cpu_ids. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NMike Travis <travis@sgi.com> Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
-
由 Mike Travis 提交于
Impact: cleanup, change parameter passing * Change genapic interfaces to accept cpumask_t pointers where possible. * Modify external callers to use cpumask_t pointers in function calls. * Create new send_IPI_mask_allbutself which is the same as the send_IPI_mask functions but removes smp_processor_id() from list. This removes another common need for a temporary cpumask_t variable. * Functions that used a temp cpumask_t variable for: cpumask_t allbutme = cpu_online_map; cpu_clear(smp_processor_id(), allbutme); if (!cpus_empty(allbutme)) ... become: if (!cpus_equal(cpu_online_map, cpumask_of_cpu(cpu))) ... * Other minor code optimizations (like using cpus_clear instead of CPU_MASK_NONE, etc.) Applies to linux-2.6.tip/master. Signed-off-by: NMike Travis <travis@sgi.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Acked-by: NIngo Molnar <mingo@elte.hu>
-
- 01 12月, 2008 1 次提交
-
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 09 9月, 2008 2 次提交
-
-
由 Alex Nixon 提交于
There's no need for these functions to be accessed from outside of xen/smp.c Signed-off-by: NAlex Nixon <alex.nixon@citrix.com> Acked-by: NJeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Alex Nixon 提交于
Signed-off-by: NAlex Nixon <alex.nixon@citrix.com> Acked-by: NJeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 25 8月, 2008 1 次提交
-
-
由 Alex Nixon 提交于
Note the changes from 2.6.18-xen CPU hotplugging: A vcpu_down request from the remote admin via Xenbus both hotunplugs the CPU, and disables it by removing it from the cpu_present map, and removing its entry in /sys. A vcpu_up request from the remote admin only re-enables the CPU, and does not immediately bring the CPU up. A udev event is emitted, which can be caught by the user if he wishes to automatically re-up CPUs when available, or implement a more complex policy. Signed-off-by: NAlex Nixon <alex.nixon@citrix.com> Acked-by: NJeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-